Problem of unity with Ubuntu 12.04 64 bit guest (July2012)

Similar Questions

• Problem of rocket with Ubuntu 10.04 Lucid

  Just upgraded to Ubuntu to 10.04.  My rocket used to connect to an earlier version of Ubuntu (8.04) but now

  It just crashes and I get the following error message.

  DBus error org.gtk. Monitor Private.RemoveVolume. Failed:

  An operation is already waiting.

  Beware of upgrading to 10.04

  As usual, I panicked too early.  When I switched mode USB auto detect to MSC things

  has started working.   I don't know what the problem is with auto detection.

  Thanks for the reply.

• Problems of network with Ubuntu 10.04

  Hello

  I've been running vmware on Ubuntu 9.04 for a while with no problems (host Ubuntu 64-bit with 2 guests, 1 32-bit Ubuntu and Ubuntu 1 64-bit).

  I've recently updated my Ubuntu to 10.04 and ran into problems with vmware, I followed the instructions here (http://www.marcosorfila.com/site/?p=380) and managed to get Ubuntu works with VMware 2.0.2 and my guests are here. Everything starts fine, except that I got the Firefox issue with the console. To work around this problem, I can connect to the console using my computer laptop windows and Internet Explorer, so I'm happy on this front

  My network uses NAT and it worked well with older versions. If I connect to the console on two comments I ping the host or guest, but for some reason, my host cannot see my guests. I spent the last 3 days, google search and I can't find anything to indicate how to solve this problem. The two guests are versions of server with no windowing capability and I normally rely on ssh access from the host, but it does not work either.

  My host is using a wireless internet network interface and this includes the IP 192.168.1.3, subnet of VMware is on 192.168.194.x

  Can anyone offer any advice to get access to my guests from the host?

  Thank you

  Klunk

  I managed to find a solution to this. I need to use a patch different than I used initially. Details can be found here.

  http://UbuntuForums.org/showthread.php?t=1473373&highlight=VMware+ping

• Problem with configure vmware workstation 6.5 with Ubuntu 9.04 64 bit latest kernel

  for the Intel-driving problem, I installed a new kernel for Jaunty.

  Normally, if you change the kernel, need new VMWARE-Workstation, but it does not work.

  I'm getting the following answer

  vmware sudo

  Login to /tmp/vmware-root/setup-26435.log

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  ModInfo: vmmon module is not found

  ModInfo: module vmnet is not found

  ModInfo: module vmblock is not found

  ModInfo: vmci module is not found

  ModInfo: vsock module is not found

  Stopping VMware services:

  Virtual machine communication interface is

  Virtual machine monitor makes

  File system is blocking

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-root/modules/vmmon-only '.

  do /lib/modules/2.6.31-999-generic/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.31-999-generic'

  CC /tmp/vmware-root/modules/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-root/modules/vmmon-only/linux/driver.c:31:

  /tmp/vmware-root/modules/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-root/modules/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [2]: * /tmp/vmware-root/modules/vmmon-only/linux/driver.o error 1

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.31-999-generic'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-root/modules/vmmon-only '.

  and the SETUP LOG

  Juli 28 19:20:55.486: app | Journal for VMware Workstation pid = 24193 version 6.5.2 = build = build-156735 option = output

  Juli 28 19:20:55.486: app | Host codepage = UTF-8 encoding = UTF-8

  Juli 28 19:20:55.486: app | Login to /tmp/vmware-root/setup-24193.log

  Juli 28 19:20:56.550: app | Extract the sources of the vmmon module.

  Juli 28 19:20:56.600: app | Module construction with the command: / usr/bin/make

  C - / tmp/vmware-root/modules/vmmon-only self-build SUPPORT_SMP = 1

  HEADER_DIR=/lib/modules/2.6.31-999-generic/build/include

  CC = / usr/bin/gcc = GREP / usr/bin/make IS_GCC_3 = no VMCCVER = 4.3.3

  and a box with this

  Error

  Failed to build the kernel module.

  Check the log file

  Does anyone know a Solution?

  Thank you

  Greetings

  Stefan

  -

  ---

  Computer laptop D830 DELL
  V9.04 Ubuntu Jaunty 64 bit

  
  

  Latest Version of VMWare Workstation

  -

  ---

  < / div >

  If you want to use the latest kernels that you should look for patches to update - look at this forum to find the last.

  http://communities.VMware.com/thread/221724?TSTART=0

  ___________________________________

  VMX-settings- VMware-liveCD - VM-infirmary

• Nightly Ubuntu connects not with Ubuntu 11.10 3.0.0 - 17-generic, but firefox 11.0 kernel is still working in the same kernel version (the source of the problem since 3.0.0 - 16A gave no problem)

  Every night of Ubuntu does not connect (crashes and doesn't stop not withouyt one kill pkill or root) with Ubuntu 11.10 and the recent 3.0.0 - 17-generic kernel

  11.0 Firefox still works in the same kernel version and I use it now. The source of the problem is perhaps the core Ubuntu since 3.0.0 - 16 core gave no problem

  Hello

  Please also check if this happens in a new profile. If the new profile is correct, you can later copy the necessary personal data of the old profile. Firefox stores your personal data and settings in a different location (folder profile) separated from its files/folder. A new profile would default Firefox settings (Tools (Alt + T) > Options, and topic: config ) and usually also would be vacuum of Extensions and themes (appearance) in tools > Add-ons) and their parameters. In addition, a new profile would have no previous website stored data/settings etc, (Tools > clear recent history).

  Profiles Howto

  Files & profile folder

  Subject: config entries

  You may also be able to find useful info here.

• Re: BIOS version 3.30 Tecra A11/M11: problems with Ubuntu systems?

  I just got the updated BIOS version 3.30 on my Tecra A11/M11 invitation.
  I'm still under Win7 now, but plan to add a dual boot with Ubuntu when the next LTS strikes in April.

  Is anyone having problems with the new BIOS?
  Should I upgrade or leave intact 3.20?

  I don't find any evidence of trouble with 3,20.

  Why upgrade BIOS if everything is OK?

  In addition to as much as I know that Toshiba can't stand not the Linux operating system, and I doubt that the new BIOS would improve any Linux performance so, if you are satisfied with the version 3.20, stay with that

• VIM insert mode with Ubuntu 14.04.1 problem

  VIM insertion mode does not work with Ubuntu 14.04.1 VM via SSH.

  For example the left arrow button leads an active line be pushed downwards, and a character D inserted instead.

  "The shortcut as it" does not work as well.

  Anyone with this problem too?

  Most likely a VMFusion problem since I did not have this problem with my VPN.

  With the help of iTerm2 and VMFusion 6.0.4.

  rest wrote:

  (2) the command I use is vi, but it's really just vim in ubuntu.

  You can also try this (from 9 solution):

  sudo apt - get install vim

• The volume control on the Satellite Pro A200 with Ubuntu 7.10

  I have a Satellite Pro A200GE-1F9, I did recently to dual boot with Vista and Ubuntu 7.10. It's the first time I used Linux and most things are going well so far.

  However, the volume control (a wheel at the front of the laptop) does not control the volume correctly with Ubuntu, rather than increase the volume smoothly as with Vista, it increases in a 1/8 of maximum volume jumps, the on-screen volume control is always smooth. I think that it is at least partly due to the change of a material volume wheel, as with the latest Toshiba, I have used, for a version of software based. It controls the system volume and runs continuously, without stop at maximum or minimum volumes.

  Does anyone know how to change this change in volume for a smooth jump?

  Thanks for any help

  Hello

  given that no one here has no idea, nor pilots, nor any information about the driver from toshiba support, nobody will be able to give you some useful information.

  Have you ever google and checked the ubuntu forums? According to me, which will bring you closer the source here instead.
  So just to start to ask in the ubuntu forums because I think that someone is there who maybe has the same problem as you.

  I hope that artistry a kind of programmer. ;)

  Welcome them

• HP DV6 series and its combabilities with Ubuntu?

  I want to buy a new laptop, actually between the toshiba a505 and the HP Pavilion DV6.
  But I read on the forums that the toshiba works well with linux and ubuntu, so I looked for the HP.

  My question: it's the HP DV6 dv6-2152ee (WM947EA) works well with ubuntu or any what linux derived?

  Dv6-2060ea works on Ubuntu. It's almost the same computer laptop dv6-2152(core i5) but with the core i7 processor. It should work without problem on Ubuntu. I don't know on the other Buntus, as Kubuntu, Xubuntu, Medibuntu, Mythbuntu, Easybuntu etc., but on Gnome works very well...

  My opinion is that the laptop works on Ubuntu, openSUSE and Sabayon linux but does not work on Debian. There is a problem with the graphics card I suppose...

• The trial version of dreamweaver is compatible with ubuntu?

  The trial version of dreamweaver is compatible with ubuntu? When I click Download trial, everything he says is ' we are currently experiencing some issues, please try again later. " If the problem persists, contact customer support. ». What should I do?

  You try to install DW on an Ubuntu box? This is not going to work. DW is Mac/PC only.

• Problem installing vmware in Ubuntu 11.10 tools

  I've upgraded from vmware workstation 7 to 8 on a windows 7 pro workstation. I've added to my VM - 11.10 Ubuntu guest. Now I have a problem installing vmware tools.  That's what I did:

  ((1) installed Ubuntu 11.10 CD in the drive, 2) open vmware and Tools CD added to office.  (3) connect you open terminal window.and.  Since I'm new to Linux, I'm stuck on how to set a password.  I type sudo passwd root, and I can't type anything in the window.

  Ideas or suggestions will be greatly appreciated.  Thanks in advance.

  You have two questions unrealated

  (1) with respect to the OS - Ubuntu 11.10 - these shoud guest invited on ubuntuforums.org Creafe a connection there and ask in the beginner's forum.

  Tip - You don't really have need a password for root in Ubuntu.  Use you sudo to run root permisssions wherer programs are needed.  He said on top of each terminal.

  (2) you have any questions on how to install VMware Tools in a Linux (Ubuntu 11.10) Guest.  You most certainly need assistance with this.  In the toolbar of the program, you will see a tab called "Help".  It only contained other information you are looking for.

  See the sections on VMware Tools.   They are really useful!

  Tip: You do not use the OS installation disc that you used to create the virtual machine. Look closely under the VM tab at the top. There will be an option in the drop-down list that says "The Install Vmware Tools" you need to select this option.  The insatll will be mounted as if by magic in SLE directory/Media in the comments.  Copy the tarred on this cdrom in / tmp.  Then naviagate (carefully) in / tmp and unpack the file you copied.  Carefully change (look at you spelling - do what I say - not as I do in this post!) to the directoyrf that was created.  Exceute as su (i.e. root - like in the 1 trick.)  the .pl program wiil be contain breast.  Technically, this is called a "script" don't forget to put a. / before the script name or the bad dthing don't know he lives there.  He will ask youj on many issues.  Answer Yes to all these thatg you can.  Most likely, he will say he does not find the gcc compiler (gcc to learn more about the new program of thisbrfand the man.  He complains of missing headers.  Exit the script (Ctrl + c).  Run a progarlm (as root!) called apt - get.  Type the command apt - get install build-esseential.  Thatt is going to install the compiler you need!   Yes still needs to install the header ogical file well! Phew!  The best way I found to do this is to install a nifty program called synaptic. Use apt - get install synaptic.  I think that Ubuntu even comes with a somewahat more easy to program called apt - get it will tell you and have fun there no Super Powers mean if you type an incorrect order!   I digress from the subject.   So, you can use use "sudo aptitude install synaptic l.  Now issue the command uname - r.  He sleeps on the same kernel you use since I use Ubuntu 11.10 asI type while I'm about to uplgrade to the very scary Ubuntu 12.04.  You don't want to do it yourself.

  3.0.0 - 12-Generic

  Now launch Synaptic.  There will be a message the first time on the program expalining.  If you want to see it every time to understand this program if y0ou forget don't check the box saying you don't wang to see this every time.  BTW youi will be asked for your root passworfd to run the program.  Hope you rfemembered it!

  In any case in the search box copy, then paste the result above (one that ends with - generic - but anything copylthe) there will be l be a long list of items, but choose the one that has the string above and the word "headers".  Insatll who.  After all it can return to the order which took end. / pl and run it once more.  Answere questions.  It will end with the encouraging words (you can take advantage of the VMware Tools.  Then, run the command - vmware-toolbox as it says.

  F well there you have it in short.  My price for Linux and Mwar advice is reawsonable please contact me at one of my addresses, alias - [email protected] and we can talk about payment.

  Enjoy

• Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"in any way I can remove my visa card from iTunes

  Hey, need help. I get this in my iPhone that 'there is a problem of billing with a previous purchase. Please update your payment method"anyway I can remove my visa card from iTunes?

  You must pay your debt first.

• the site theme is problem with firefox, but not any problem of chrome with!

  the site theme is problem with firefox, but not any problem of chrome with!
  for ex: http://haftegy.ir
  How to fix?

  Wow sorry! IM update firefox to the latest version and my problem is solved.
  Thank you very much.

• How to upgrade my browser Firefox with Ubuntu?

  Yahoo no longer works with my old Firefox browser.

  I only work with ubuntu.

  where can I get an upgrade?

  Thank you!

  You could try to update your version of distro (Canon) of Firefox but IIRC the version of Ubuntu, you seem to be on 8.04 LTS (Lucid) cannot provide official updates of Firefox (or probably other software such as Open Office/LibreOffice).

  You can switch to a new version of Ubuntu, possibly 12,04 LTS (accurate). I use. Accurate will a newer version of Firefox, which updated the Installer Firefox distribution.

  • output names and support the http://en.wikipedia.org/wiki/List_of_Ubuntu_releases#Table_of_versions timeline

  The other alternative is to install Mozilla Firefox. Who will install an additional browser. For purposes of comparison and evaluation, I also run several versions of Mozilla Firefox. Let me know if you need further information.

  • Installing Firefox on Linux

  You may need to consider using a second profile Firefox, or the transfer of bookmarks etc between versions of Firefox or the operating system.

• I can not access to sites such as Youtube or truckcam.tv it seems that the problem may be with the most recent Adobe flash and firefox as browsers further

  Question
  I can't access to sites such as Youtube or truckcam.tv , seems, the problem may be with the last Adobe flash and firefox as other browsers work I reinstalled both, but without success, even on the two desktop using Vista and laptop on Windows 7

  See:

  • https://support.Mozilla.org/KB/Flash-113-crashes