Problem of updating BIOS on Satellite Z30-A-12R

Hello
I have a problem when you try to update the BIOS of my A-Z30-12R.
I currently installed version 2.6 of the bios. My computer had to be reformatted and all programs re-installed. When reinstalling the utility the ECO utility could not be installed due to the incompatibility with the version of the bios that I use.
When you try to update the bios, the new version is 4.2, but trying to download it and apply it, it says that my computer is not supported.
Is it possible to update the bios? Why I have a problem with the new version?
Thanks for your help.

If you have Win7: install Toshiba Value added Package.
If you have Win8/10: install the driver of Toshiba system and system settings.

Tags: Toshiba

Similar Questions

  • Problems of updating BIOS on Satellite L40 - 15G

    Good afternoon.

    I have Toshiba Satellite L40 - 15G and I want to put 4 GB of ram (2 x 2).
    It works with 3 GB but with 4 GB it just does not start - gives me a blue screen.

    I read on the internet and discovered that I have to update my BIOS (my version curent is 1.60).
    I have vista 32 bit. I also tried to do the update via the site of toshiba, but without success.
    I am running the .exe file, but when I restart the computer I have the same version.

    What should I do?

    In the hope of a response.
    Pedro

    Hello

    I think you are using an incorrect BIOS.
    Satellite L40 - 15 G seems to belong to the series of PSL48E

    Check again!

    Toshiba Europe page provides a BIOS 2, 00-VICTORY for Vista and WIN-5, 50 for Win XP

    Regarding the upgrade of memory:
    I don't know if your laptop would be m supports 4 GB of RAM. Is that there are different models of L40 and some models supports only 2 GB of RAM!

    Your L40 - 15 G seems to use the Mobile Intel GL960 Express Chipset...
    Check out the details on the Intel page which RAM max can be managed by the Intel GL960 Express Chipset.

  • Problem after update bios on Satellite L505-144

    Hi all

    New here, but I know I'll be in the right place.

    I recently installed some updates, such as suggested by temppro. Now whenever my compy starts in Windows 7 64 bit, I get the following message.

    RunDLL
    There was a problem starting C:\Users\Ems and Swift\AppData\Local\prtwst.dll

    The specified module could not be found.

    I post the picture of it, but I don't know how to paste the picture.

    If someone could give me an idea what to do, I'd be really grateful the help... I tried to re - install the bios and by removing other updates... But still this msg appears...

    Thanks in advance

    Paul

    Post edited by: kochney

    just a quick note, everything seems to work fine, just this error msg, which made my nut in :D

    Hello

    Seems that the app is loading at the beginning that creates this message.
    You should check the msconfing (in RUN type msconfig and go to the Startup tab)
    There, you can check what applications are mentioned.

    You can also try to clean the registry with CCleaner. This tool is free and scans the registry and removes garbage from registry

  • Problems after update BIOS on Satellite Pro 4600

    There is a problem with the computer toshiba laptop. its the fact do not install any windows OS after the Installer starts running xp there is an error message that says that the drivers of setupdd.sys could not be loaded (error code 14)

    I tried with different CDs with the same error, so I tried the procedure of the ghost image, but all in vain after reboot it is with an error that requires a kernel dll could not be found that I even used a cool ghost image but the same error.

    In fact, I upgraded the bios to a worm recent 2.60 it was beautiful, he started twice and has been used for several hours. the update was suuccesful up and running. It all started when we placed a kingston flash drive in the USB after it was working very well we copied a simple document on drive d, nothing else, it worked for half an hour. After I stopped, and then it was late at night when I started the system fine.i was listening to a song after that, he displayed the error messge system32 driver pci.sys damaged or missed.

    Then I tried everything I knew in windows xp to boot with xp cd and... etc I also formatted the hard drive to try to win98 installation gave an error also, external error to msdos, I think it's the update of the bios that is problem because windows 2000 Professional installation gave a very specific error. BIOS not fully ACPI compatible after pressing F7 in the installer of windows xp the feature ACPI went silent and requested installation good, but during the formatting the drive but it stopped with an error that the disc hard cannot be formatted.

    It's a week now. you have the previous bios file with you maybe which would solve the problem or other.
    Please guide me. I went on toshibas website 25 - 30 times but they do not have the previous bios except the last ver2.60 file

    Hi Usman

    The problem is that you can't roll back BIOS to the previous version. Just service partner chartered Toshiba for this special tool.

    Check it please this document. I have gift? t know if this can help, but perhaps you can better understand the problem http://support.microsoft.com/?kbid=330181

    Good luck!

  • Problem of updating BIOS on Satellite M60 - 175 - error rom size

    Hello

    If anyone can help!

    Tried to update my bios M60-175 with toshiba bios downloads but size rom error receiving while trying to flash rom
    my current bios; version toscpl-6040000, 1.00parttblx, smbios v 1.04

    Thank you

    Please check this Toshiba FAQ document about;

    + I can't update my BIOS with the function BIOS Phoenix-file ZIP Windows XP Windows. +
    + I always receive following error message: the size of the ROM file is incorrect. +

    http://support.toshiba-tro.de/KB0/TSB59014X0000R01.htm

    It should help to solve this problem

  • Updating BIOS for Satellite M300 PSMDCA-03700R

    I'm looking for a BIOS update for my Satellite M300 model: PSMDCA-03700R, but could not find my model on the support site. I wonder what model should I choose when searching for the upgrade of the BIOS?

    Do not upgrade BIOS is there is no reason for this.
    Have you noticed a few problems with your machine?

  • Cannot update Bios for Satellite U400 - 134 Vista 64-bit

    When I try to update Bios 3.50 courses it is said that I couldn't have an administrator rights, but I run it under administarator.

    Who knows about this problem?

    Post edited by: Gerus

    Hello!

    Satellite U400 BIOS 2.0.17.64?
    As far as I know the latest version of the BIOS for Satellite U400-134, which belongs to the PSU40E series is the version 3.50.
    Check again on the Toshiba site: http://eu.computers.toshiba-europe.com

    If you download the zip file, you should extract all files before you start the update.

    Good bye

  • Touchpad no longer works after update BIOS on Satellite A500-1GL

    Hello world

    I just bought my laptop Satellite A500-1GL today. I started at the top and plays a bit (nothing serious). The touchpad worked very well at the moment.

    Then I discovered this tool to update the material and the update of the BIOS that worked without any problems. After I restarted the laptop, BIOS, loaded the default values of the installation and recorded.
    After that Windows 7 (x 64) started the touchpad no longer works...

    I downloaded the driver here and installed again once, still does not. I went into the BIOS, disabled the touchpad (I thought that maybe it's a bug...) and started again. It still does not...

    I enabled it again in the BIOS, tried to push the function + F9, but it still does not... Finally, I used the recovery and installed a Windows 7 costs.
    But unfortunately it still doesn't.

    Now, I'm out of ideas, can anyone help?
    Is there a chance to get the older version of BIOS to downgrade it?

    Thanks in advance ;)

    Hello

    It seems strange that after update Bios touchpad no longer works.

    > Is there a chance to get the older version of BIOS to downgrade it?

    To be honest, I don't know where to find. In any case, do a search on Google. Perhaps, other users of the forum can give you a link to download.
    The downgrade of the Bios is riskier upgrade procedure. So, be careful the next time...
    Advice for the future; Do not touch the running system.

    Good luck!

  • HARD drive click after update Bios on Satellite A100

    Hello.
    I just did a bios update for my Satellite A100 PSAA9, and after that I started to hear a few clicks on the hard drive, from time to time. They appear very often, but I would like to know why they started!

    The bios update was published in 26/11/2007.
    Does anyone have the same problem?

    Thank you.

    I put t think it has something to do with the BIOS update.
    I put t don't know how old you HDD is but maybe that click concern only the HARD drive hardware problem

    There are several times in my HARD disk created similar clique and sounds but it s runs great
    I didn't noticed any hardware problem however, we cannot exclude a hardware problem and therefore, you should back up important data to prevent the files from damage.

    Best regards

  • Need help to update BIOS on Satellite L30-113

    Hello

    I just downloaded the latest update of the BIOS for my Satellite L30-113 (PSL 33) and I was about to install when I remembered that I actually downgraded to Windows XP(this notebook is originally with WIndows Vista).
    My question is it will produce no problem when I run the .exe file, because it can be programmed to update BIOS under Windows Vista only?
    I know there are a lot of competent users who can help me in this forum.

    Thanks in advance.

    Hello

    I just got a check for the BIOS on the support and downloads page and I found the inscription as "OS independent. This essentially means that the update is compatible with both operating systems.

    Remember that when you update the BIOS, you need ensure the power supply is connected, software security is disabled, nothing is attatched to (other than the power cord) system, power is turned off (such as screensavers), saving features and no other software is running. Also disconnect from the Internet, too, if possible.

    You can download the latest version of the BIOS here:
    http://Support1.toshiba-tro.de/Tedd-files2/0/BIOS-20071106150302.zip

    Also, you can find the update may not work if a BIOS password is set, if this is the case, you need to delete that, too.

    Kind regards
    Nukey

  • Updating BIOS for Satellite M100-150

    May indicate the reference of BIOS for Satellite M100-150 for Windows XP download, on an official website, I can not download, the reference does not work.
    I use the translator so that for the quality of the translation, I don't answer. :)

    Hello

    Here, you need to check if the Bios update is available for your model, otherwise I think that there is not another source to download here.

    http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

    ??????. ?????? ?? ??????, ?????? ???? ?????? ? ??????. ????, ?? ???????, ?????? ??? BIOS? ???? ???????????? ? ?????? ????? ???? ????????).

    Sorry, guys I have replied in Russian, just want to help him because of the bios

  • Updating BIOS for Satellite Pro S300

    Hello

    An update of the BIOS for Satellite Pro S300 series, even if there is no change log so there not sure it will set.

    Down here at Toshiba

    Concerning

    Phil

    Hello!

    Thanks for this info :)

    I have never seen anyone from Toshiba but maybe they only read here.
    I don't know, sorry.

    Good bye

  • Updated BIOS for Satellite Pro U200?

    Hello

    does anyone have any experience with BIOS version 1.3 for Satellite Pro U200? I've upgraded to this version of the BIOS and have had several problems since then - shortened wireless keyboard does not and display the overflowing of installation brightness to name two.

    In addition, as I noticed last week, upgrading the BIOS can not be downloaded more and there is no alternative - just says download page don't: "no BIOS upgrade for this product! Is there anyone that has 1.2 BIOS so that I can try to downgrade to this version?

    What is your experience with BIOS 1.3?

    Hello

    It s really strange?  :|
    I checked the BIOS for Satellite U200 and Satellite Pro U200 download section, but I put t found any BIOS download at this time.

    A few years ago the authorized service provider has installed an older version of the BIOS on my Tecra friends unit.
    I guess that he should be able to do it on your Satellite Pro U200.
    The other possibility is to wait for a newer version of the BIOS.

  • Update BIOS on Satellite A300

    I want to update the version of the Bios for laptop Toshiba satellite A300 PSAGCE-09800WCE
    Current Version 1.90 and 2.20 version is available
    I just installed Ubuntu LTS OS 14.04
    Is it possible to upgrade the BIOS to version 2.20?

    Message was edited: assignment has been translated

    Hello

    Toshiba offers updates BIOS to WIN. This means that the BIOS update can be done under Windows operating system only. You can't do this if you use Linux.

    Is there a reason to update BIOS? I mean, if everything is OK you must not update BIOS to the latest version.

  • Can't find an updated BIOS for Satellite A30

    Hi friends.
    I'm not found Toshiba A30-203 a new BIOS update.
    I want to install windows vista but this sccren error.
    Error message:
    "A computer has been detected and windows has shut down to prevent damage to your computer.

    If this is the first time you2ve seen this Stop error screen restart your computer. If this screen appears again, follow these steps:

    The BIOS in this system is not fully ACPI-compatible. Please contact your system provider for an updated BIOS. »

    to apologize for my bad English.

    Hello

    It seems that the Satellite A30 series is a series that was shipped with the BIOS to no support for Vista.
    I think that it should be possible to install Vista after a update of the BIOS.

    But know that you will ask for the new version of the BIOS. Am I wrong? ;)

    Well, on the page of the Toshiba BIOS, you should find different versions of BIOS.
    It is very important that you check the more info option you will resume the BIOS updated. You will find information on the compatibility of the BIOS (not every version is compatible with all units).

    But as you know that Vista is not official on the market. As I remember, it should be possible to buy the operating system in January 2007.
    I think Toshiba will present a new version of BIOS for Vista in next time. So I hope ;)

Maybe you are looking for

  • PCI-6503 and LabView 7 trouble in Win XP

    I'm unable to get a digital I/o card 24-line PCI-6503 correctly installed in my Win XP machine.  I use LV 7.1 and NI VISA 5.0.3.  I tried the two v 7.2 and 7.2 DAQ, which supports this card.  Is there something special about software versions and com

  • Tips for the TCP wait of asynchronous Messages with non-standard expression tanks

    Hi all I have a PITA instrument that I need to communicate with in a system of greater control.  This instrument communicates via RS232 to a server running on the PC OEM application.  In order to communicate with the instrument, I have to use the TCP

  • Update of Windows gives error #5

    Windows Update is in automatic mode. I get the prompt telling me that windows has updates that must be installed, if I click accordingly. I can see preparation for installation, but which turns on at all never. I once let go for 2 days. I left and it

  • Problem updating MS Security Essentials 1.85.1836.0

    My SP Securtiy Essentials wants me to update, it's yucky amber color and the exclamation point, but every time that I made it will be little 'search' process, stop after getting 25% (or 1 sec) and then go back to the "update" screen telling me my def

  • I am not able to connect on my user profile.

    I am not able to connect to my user profile.  I'm the account administrator.  My password does not work or I can not recall.  I read a lot about other people having similar problems, and most of the advice given to them is not really easy to understa