problem of vConverter in the fedora core 3

Similar Questions

• Satellite M40-281: Fedora Core 4 does not recognize the LAN card

  Fedora Core 4 recognize everything my satellite M40-281, except for the LAN card :-(

  What can I do?

  Thanks and... Sorry for my English (I'm Italian!)

  which

  Hello

  Don t support Toshiba laptops Linux distributions. Computers laptop Toshiba are distributed and tested with the Microsoft Windows operating system.

  As far as I know, this device was shipped with Marvell based PC Express I / F LAN (I / F Marvell chip at base of PC Express I / F)
  Well, you can try glasses a bit. You might find a driver for Linux.

  In addition, the Fedora Core 4 is based on a Red Hat Linux distribution. So I recommend you to visit this site:
  http://www.redhat.com/en_US/USA/Fedora/

  Good luck

  Good bye

• How I can install Fedora core 2 in my M70-159?

  I try to install Fedora Core 2 in my M70-159 laptop, but I get the message that there is no HARD disk found.
  Can any body tell me how to install fedora.

  Thank you

  Hello

  As redhawk says you get a few problems with the installation because of a SATA HDD.
  You have the right driver to install it.
  But why you don t use a different distribution of Linux such as Knoppix?
  You can use Windows XP and Linux at the same time! You n t need to install Knoppix on the HARD drive because you can boot Linux from the CD or the DVD. It works very nice to you have all options and functions.
  In my opinion, you should change your linux and try the Knoppix

  Best regads

• Running Fedora core 6 Satego P100-10U would become very hot

  Hi all

  I run Fedora Core 6 on my laptop Satego P100-10U. But there is a problem using
  NVIDIA-Driver. After a few seconds, running Fedora laptop gets very hot.
  NVIDIA sensors show me a temperature about 100-112 degrees.
  Is there a solution, how can I fix?

  Kind regards
  Johann.

  Hello

  As you probably know Toshiba designs and publish own graphics drivers for Toshiba laptops the graphics drivers are not the same thing as the original graphic drivers of manufacturing such as nVidia or ATI graphics card!
  Graphics drivers from Toshiba are changed in order to avoid overheating of the graphics cards!

  Usually, the books don't provide any special graphics card modules but only the module cooling CPU cooling and so the laptop graphics driver controls the performance of the graphics card.

  If the temperature rises to the critical level the driver slows down the map decreases the temperature and heat production.
  Drivers Nvidia or ATI of origin don't feature such support!
  In my opinion, this is a reason why the card temperature rises to highest level!

  Attention, something like that could damage the graphics card!

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• Drivers for GeForce FX 5200. Distribution is Fedora Core 2

  Hello
  I have the Satellite M30 941 with GeForce FX5200 graphics card. I use Fedora Core 2 on my laptop and I'm looking for drivers for this device that I can install on my pc, can you help me?
  I noticed that when I video, video scrolling becomes completely white, I see not write everything. What will be based on?

  Hello

  I don't really know about Fedore Core 2, but I also tried to install Linux on my Toshiba laptop and found after interesting sites on the net.

  http://newsletter.toshiba-tro.de/main/index.html

  and

  http://Linux.Toshiba-DME.co.jp/Linux/index.htm

  The first is Toshiba Europe and here you can see the compability and driver versions.

  Maybe this could help you find a driver!

  Hans Bye

• Windows XP svchost.exe problems. Cannot find the latest updates for windows xp.

  Hello, this is my first time on the Microsoft Community page.

  I have a very strange problem with automatic updates svchost.exe and windows. I know that automatic update of windows, has been known to cause problems on XP and there is thus CPU utilization of memory leaks. Last night, I tried to install the latest windows XP updates, with automatic tool. The tool hanged during the process. Not sure why exactly. I never had a problem with it. I've been running Xp SP 3 for more than five years. In any case, I rebooted my system and checked to see if the updates actually treatment. They do not have. Then I went to the windowsupdate.microsoft site. I was trying to these updates. The scan never completed, he just constantly checked, for about 45 minutes. I decided to do some research. I found the C:\Windows\SoftwareDistribution folder "fix" online. He kicked, I renamed the file. And then disabled auto updates and restarted my computer. After windows starts, I re-activated automatic updates and waited. Nothing happened, so I did some research more. I noticed that svchost.exe uses about 25% the use of the processor. Normally my treated systemidle is 99%. I used Process explore and isolated the wuauclt.exe under the svchost.exe file. When I disable automatic updates executable, it is up to a full 99%.

  I'm not sure why it uses 25%, when I look at the actual use of the memory for the wuauclt.exe, it is only using about 17 k of memory. Which is quite low. I have not turned on microsoft update, starting in the configurations of parameters at windowsupdate. I know that in the past, that has been a problem and swallowed up system resources.

  Any advice would be helpful. Thank you in advance.

  There are a lot of threads on this forum - and many others - this problem - just try to do a Google search for UPDATES of XP SVCHOST - hits now more than 8 million.

  But to save you the trouble of tracking down the fix OK here is the short version

  1. disable automatic updates using Control Panel icon

  2. restart the computer - SVCHOST is now not going crazy

  3. check which version of Internet Explorer you have installed IE8, IE7 or IE6

  4. download and install - the links below - the good update for Internet Explorer.

  Assuming you have Windows XP 32 bits here are the direct download links:

  IE8: IE8-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41404

  IE7: IE7-WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41442

  IE6: WindowsXP-KB2898785 - x 86 - ENU.exe
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=41458

  5. Once installed, you can reactivate the automatic updates and using Windows Update.

  Note: The bug also affects access via Windows/Microsoft Update Web site.

  KB2898785 is the "Cumulative Security Update for Internet Explorer" (December 10, 2013)

  There is a bug in the function of automatic update under XP running the SVCHOST process at full CPU load (100% or 50% or 25% depending on the number of CPU cores you have). If you have a Quad core CPU the bug works the CPU at 25% (a carrot out of four) and eventually battles through a conclusion - but if your computer is a single old Celeron or Pentium bug works the CPU chip at 100% load for many, many h/solid.

  Faster your processor and RAM than you seem to make a radical difference to the actual times are waiting for you maybe search for updates complete. Most of the old core systems were never designed to deal with this kind of situation and can easily overheat. This is especially true of laptops and desktop systems older where the radiator can be partially blocked with fluff and hairs of animals - which could cause blockages or stops!

  Microsoft said last month that the updates of Internet Explorer are treated differently from all the other updates - which is originally the XP update engine run so slowly as to appear frozen. If the update service finds that you don't have the latest version of IE that is currently available, it starts to search the entire tree of updates of IE to see what it takes - rather than offering just the cumulative current update for your system.

  But if you manually install the update yourself update Internet Explorer service is fully updated and is not search for updates of IE. But until Ms. fix it will still occur whenever a new update is published.

  MS said that intend to prune the IE updates database so that only the main cumulative updates have been offered when a search has been launched - it did not in time for the update as it should of November and obviously has not arrived or worked either in time for the December Update!

  MS say they hope to have a fix before the January updates are released (Patch Tuesday) - that the problem will be activated once the next update Cumulative of IE is released.

• Problem with shutdown on the start menu

  Original title: PROBLEM WITH SHUT DOWN IN STAT MENU

  I had a problem with closing down on the start menu in my dell Inspiron CORE i3 laptop with windows 7. When I right click on the command prompt, and the user has clicked run as administrator nothing came, and now I can't click on anything whatever in the menu tab start such as my documents, my computer and Control Panel. Please tell me how to solve this problem. for this reason I can't tab from the command prompt.

  Hello

   
  Thanks for the reply and happy to know that the problem has been resolved.
   
  If you have problems with Windows in the future, please do not hesitate to post in the Microsoft Community Forums and we will be happy to help you.

• Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission, he leaves the game

  Star Wars: Republic Commando. Worked on Vista, the problem is that when the game tries to load the first mission (the only one available for a new player) outputs of the game and gives the following. I hope this info is useful to anyone who is willing to take the time to help me. Thank you-Zachert45

  Details:

  Problem event name: APPCRASH

  Application name: SWRepublicCommando.exe

  Application version: 0.0.0.0

  Application timestamp: 41f707e4

  Fault Module name: StackHash_1a02

  Fault Module Version: 0.0.0.0

  Fault Module Timestamp: 00000000

  Exception code: c0000005

  Exception Offset: 6 c 707544

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1: 1a 02

  More information 2: 1a022ea3469ead417de7f3ac704042e3

  3 more information: aa4f

  Additional information 4: aa4f8516a5b4c2bae31f69214dbeb837

  In addition, the game made a newspaper that it lasted, if an error occurred. NOTE: Windows verson shown here was one of the many tests bring made, all ended the same way.

  Uninitialized: open the log file, 08/09/12 19:20:48
  Uninitialized: name subsystem initialized
  Init: Detected: Windows NT 6.0 (Build: 6000)
  Init: Build: 139
  Init: Version of the engine: 2226
  Init: Update: January 25, 2005
  Init: command line:
  Init: Base Directory: C:\Program Files (x 86) \LucasArts\Star Wars Republic Commando\GameData\System\
  Init: Character set: ANSI
  Journal: Related to Window.dll
  Journal: Related to Core.dll
  Journal: Related to frengine.dll
  Init: Subsystem of the initialized object
  Init: Computer: ZACHERT45HP
  Init: User: Zachert45
  Init: Of CPU Page size = 4096, processors = 4
  Init: CPU detected: type processor PentiumPro (GenuineIntel)
  Init: CPU features: FPU CMov EAP RDTSC MMX, SSE
  Init: CPU @ 2694 MHz
  Init: Total memory: Phys = 1048575 K Pagef = 2097151 K Virt = 2097024K
  Init: Working together: 32000 / 159000
  Init: Physical memory: 1023 MB
  Init: D3D Device: video memory onboard: 1008
  Caution: Charge Dynamics Engine.GameEngine
  Journal: Bound to CTGame.dll
  Journal: Bound to Gameplay.dll
  Journal: Related to IpDrv.dll
  Journal: Related to XInterface.dll
  Journal: Related to XGame.dll
  Init: Unreal engine initialized
  Journal: Related to WinDrv.dll
  Init: Client initialized
  Journal: Related to D3DDrv.dll
  Init: Direct3D detected adapters:
  Journal: aticfx32.dll/Radeon HD 6470 M
  Init: D3D Driver: MaxTextureBlendStages = 8
  Init: D3D Driver: MaxSimultaneousTextures = 8
  Init: D3D Driver: MaxActiveLights = 8
  Init: D3D Driver: MaxPrimitiveCount = 5592405
  Init: D3D Driver: MaxVertexIndex = 16777215
  Init: D3D Driver: MaxStreams = 16
  Init: D3D Driver: MaxStreamStride = 508
  Init: D3D Driver: MaxVertexShaderConst = 256
  Init: D3D Driver: VertexShaderVersion = 1.1
  Init: D3D Driver: PixelShaderVersion = 1.4
  Init: D3D Driver: support AGP detected
  Init: D3D Driver: using w-pixel fog
  Init: D3D Driver: trilineaires media
  Init: D3D Driver: supports BLENDDIFFUSEALPHA
  Init: D3D Driver: Supports LOD bias
  Init: D3D Driver: Supports Z polarization
  Init: D3D Driver: supports D3DTOP_ADDSIGNED2X
  Init: D3D Driver: supports D3DTOP_BUMPENVMAP
  Init: D3D Driver: supports D3DTOP_BUMPENVMAPLUMINANCE
  Init: D3D Driver: supports D3DTOP_DOTPRODUCT3
  Init: D3D Driver: supports D3DTOP_MODULATEALPHA_ADDCOLOR
  Init: D3D Driver: supports D3DTOP_MODULATECOLOR_ADDALPHA
  Init: Unreal Engine Direct3D support - internal version: SB3
  Init: D3D Device: szDriver = aticfx32.dll
  Init: D3D Device: szDescription = Radeon HD 6470 M
  Init: D3D Device: wProduct = 8
  Init: D3D Device: wVersion = 17
  Init: D3D Device: wSubVersion = 10
  Init: D3D Device: wBuild = 1065
  Init: D3D Device: dwVendorId = 4098
  Init: D3D Device: dwDeviceId = 26464
  Init: D3D Device: dwSubSysId = 370806844
  Init: D3D Device: dwRevision = 0
  Init: D3D detected: ATI video card
  Init: D3D Device: using cubemap [with mipmaps]
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticDiffuse
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularMatte
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularDull
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularPolished
  Caution: Charge Dynamics BumpTex.StaticEnvmaps.StaticSpecularShiny
  Journal: (Karma): Karma from beginning of game.
  Journal: (Karma): creation of MeAssetDB.
  Journal: (Karma): loading: ambient.ka
  Journal: (Karma): loading: clone.ka
  Journal: (Karma): loading: droid.ka
  Journal: (Karma): loading: geonosian.ka
  Journal: (Karma): loading: rasanimprops.ka
  Journal: (Karma): loading: trandoshan.ka
  Journal: (Karma): loading: turrets.ka
  Journal: (Karma): loading: vehicles.ka
  Journal: (Karma): loading: wookiee.ka
  Journal: (Karma): finished creating MeAssetDB (27 properties).
  Log: Watermark memory pre load: 0
  Journal: Preload for entry Stats: 58 opened, looking for 269, dumpsters 954, bed 46950 KB / 4329, serialize 44419 KB / 1615039
  Journal: LoadMap: entry 08/09/12 19:20:49
  Log: Watermark memory pre load: 1
  Caution: Charge Dynamics Entry.myLevel
  Journal: Loading times for the entry: 0.000 sec total, 0.000 app
  Connection: Time entry init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is "GameInfo."
  Newspaper: The level is level Entry.myLevel
  Newspaper: * WARNING - paths is maybe NOT INVALID *.
  Journal: What is the Entry.myLevel level to play (0) 08/09/12 19:20:49...
  ScriptLog: InitGame:
  ScriptLog: Mutator database is Entry.InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  Connection: Time entry init BeginPlay: 0.000 sec total, 0.000 app 08/09/12 19:20:49
  Log: Watermark memory Post charge: 2
  Connection: Time entry init: 0.000 sec total, 0.000 app
  Journal: Entry file load stats: opens 2, looking for 4, 9 trucks, 31KO bed / 16, serialize 7KO / 2092
  Connection: Exit LoadMap 08/09/12 19:20:49
  Caution: Charge Dynamics UDebugMenu.UDebugRootWindow
  Caution: Charge Dynamics UDebugMenu.UDebugBlueLookAndFeel
  Journal: Related to ALAudio.dll
  Init: AL_VENDOR: Creative Labs Inc.
  Init: AL_RENDERER: software
  Init: AL_VERSION: OpenAL 1.0
  Init: AL_EXTENSIONS: EAX 2.0, EAX, EAX, EAX 4.0 3.0 unified and EAX - AC3
  Journal: 16 Sources AL Audio created!
  Init: ALAudio: initialized subsystem.
  ScriptLog: 255 team
  Journal: (Karma): KInitSkeletonKarma: framework, but not of the world.
  Init: System initialized to input InGameTempName
  Journal: Open window
  Journal: Couldn't put the window in the foreground.
  Journal: Enter SetRes: 1024 x 768 full screen 0
  Journal: Using back buffer 22 (32-bit) format
  Journal: Using format 77 (32-bit) depth buffer
  Journal: Creation of device
  Init: D3D Driver: CreateDevice: will use the hardware transformation and lighting.
  Init: D3D Driver: CreateDevice: will use hardware vertex processing
  Journal: Create context of the EMI.
  Init: Init game engine time: seconds 1,366000 total 1.014007 app
  Journal: Game init load stats: opens 2, looking for 11, 61 Skips, bed 445 KB / 141, serialize 268 KB / 190555
  ScriptLog: MenuOpen: XInterfaceCTMenus.CTStartPCMenu (RESET)
  Caution: Charge Dynamics GUIContent.Menu.RC_title_bg
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Connection: Start time: 1,177000 seconds
  Newspapers: Lots static mesh: 0 bytes of vertex, 0 bytes index
  Journal: StartMovie with m_PlaybackRect (0, 0), (1024, 768)
  Journal: Precaching: Entry.LevelInfo0
  Journal: Allocation of the dynamic index buffer 16384 bytes.
  Log: Precache time geometry: 0.006 sec total, 0.000 app
  Journal: Texture precache time: 0.009 s total, 0.000 app
  Journal: Statistics of load precache entry: opens 5 to 0, seeks 10 jumps, bed 1512 KB / 28, serialize 1496 KB / 142
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Caution: Charge Dynamics XInterfaceCTMenus.CTMenuMain
  Journal: GotoMenu (InGameTempName)
  Journal: StartMovie
  Journal: CallMenu (InGameTempName)
  Journal: GotoMenu (InGameTempName)
  Journal: CloseMenu()
  Journal: Browse: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  Log: Watermark memory pre load: 2
  LOG: Preload PRO Stats: 2 opens, looking for the 14, 15 jumps, bed 1315 KB / 56, serialize 1289 KB / 23365
  Journal: LoadMap: new level of loading. Pause/stop implementing caching of files.
  Journal: Unloading: PRO package
  Journal: LoadMap: PRO? Name = zach? Class = CTCharacters.PlayerCommando? Team = 255 08/09/12 19:21
  ScriptLog: stop menu movie
  Journal: Garbage collection
  Journal: Serving garbage
  Journal: Garbage: objects: 23768-> 23528; REF.: 232574
  Journal: FName High Watermark: 33191
  Journal: Number current FName: 30109
  Journal: FName slots available: 3082
  Journal: UObject High Watermark: 23774
  Log: Watermark memory pre load: 3
  Caution: Charge Dynamics PRO.myLevel
  Journal: 131072 bytes dynamic vertex buffer Allocation.
  Journal: (Karma): initialization Karma for the level.
  Journal: (Karma): Autodetecting CPU SSE
  Journal: (Karma): using SSE optimizations
  Newspapers: Loading PRO time: 0,356 total sec, 0,328 app
  Connection: Hour PRO init actor coll: 0.000 sec total, 0.000 app
  Journal: Play class is 'CTGameInfoSP '.
  Newspaper: The level is level PRO.myLevel
  Journal: What is the PRO.myLevel level to play (0) 08/09/12 19:21...
  ScriptLog: InitGame?: Name = zach? Class = CTCharacters.PlayerCommando? Team = 255
  ScriptLog: Mutator is PRO. InGameTempName
  ScriptLog: GameInfo::InitGame: bEnableStatLogging False
  ScriptLog: MusicStat is InGameTempName
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "CloneBoy."
  ScriptWarning: PawnFactory PRO. PawnFactory2 (function CTGame.Factory.PostBeginPlay:0058) Factory PRO. PawnFactory2 has no prototype!
  WARNING: PlayAnim: not found "ActionBreathe" sequence for the mesh "GunshipBall."
  ScriptWarning: PawnFactory PRO. PawnFactory0 (function CTGame.

  I read the fix below on three different forums.
  Seems to work for some. Especially those with Pentium cpu.

  "In the main Menu, select Options-> graphics. Variation in the quality of the low relief map. When I have it on medium or high, it crashes. »

  The game was released in ' 05, a bad year for compatibility issues with different
  DRM and Win7. If the problem is with the Launcher, then a noCD fix would be a good solution.
  http://MegaGames.com/games/Star-Wars-Republic-Commando

  .

• recognizes the triple core as a core

  Recently, I upgraded my pc on windows 7 from a single to a triple core AMD phenomenon 8550 processor. Although every time I check the Task Manager or cpuz shows only a kernel. I tried almost all the possible solutions, but I can't seem to solve the problem.

  Run the utilities posted below.

  Prime 95:
  http://www.Mersenne.org/freesoft/
  It's a stand alone .exe file contained in an archive .zip.
  Simply choose to run the option 'stress test' for a few seconds. If you have 3 active hearts it will show 3 test of columns, one for each carrot.

  Core Temp:
  The temperature of each core of the processor.
  http://www.alcpu.com/CoreTemp/

  CPU ID (CPUZ): http://www.cpuid.com/cpuz.php
  Tab CPU, lower right corner list hearts and son.

  J W Stuart: http://www.pagestart.com

• Fedora Core 14 and 2.6.35.6 - 48.fc14.x86_64 kernel, VM server 2.0 "running kernel does not.

  I tried to install VMserver on fedora core 14 with linux kernel 2.6.35.6 - 48.fc14.x86_64 and can't seem to make it work. I inserted the results of my attempts to install. I installed the kernel-devel, more recent GCClib files and pretty much everything else I found to install on the internet partaning to it using yum.

  -

  ---

  Ensuring services for VMware Server are stopped.

  Stop the VMware autostart virtual machines:

  Virtual machines

  Stopping VMware management services:

  VMware Virtual Infrastructure Web Access

  VMware Server host agent

  Stopping VMware services:

  VMware authentication daemon

  Virtual machine monitor

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)? ^[[B[[B^[[B

  The answer "" is not valid.  It must be a "y" or "n".

  None of the vmmon modules pre-built for VMware Server is suitable for your

  kernel running.  Do you want this program to try to build the vmmon module for

  your system (you must have a C compiler installed on your system)? y

  Using compiler "/ usr/bin/gcc". Environment variable CC to override.

  What is the location of the directory of C header files that match your running

  kernel? / usr/src/linux/include /usr/src/kernels/2.6.35.6-48.fc14.x86_64/include

  The directory of the kernel headers (version @@VMWARE @ UTS_RELEASE) does not match

  your kernel (version 2.6.35.6 - 48.fc14.x86_64) running.  Even if the module

  to compile successfully, it would not load into the running kernel.

  What is the location of the directory of C header files that match your running

  -

  ---

  Everyone else had this issue. The VMware - Update-implementation to date, I do not think far enough for me to use it on this. I have seen that this takes place with older additions, but I'm not sure how to go about ractifing this. Any help will be greatly appreciated.

  Thank you

  Hello

  Make sure you http://radu.cotescu.com/2010/01/19/how-to-install-vmware-server-ubuntu-fedora-opensuse/ or http://risesecurity.org/2010/04/02/vmware-server-2-0-2-update-patch-2/ in order to get VMware Server 2.0.2 working in Fedora 14.

  I'm also using Fedora 14 x 64 and used the second link (manual process) to install it.

  Kind regards

  Victor

• VConverter resizes the disk?

  Hi all

  I want a physical machine with 243 GB drive to an ESX3.0. The server does not have enough space (156GB) so I lowered the size of the disk with the option "size of destination."

  This would result in a 113 GB virtual drive (see image) - but Yikes, vConverter says "the file system does not support files like this great"...

  The output of vmkfstools - P says it has 1 MB block size so if I understand correctly, it must support up to 256 GB of files...

  $ / usr/sbin/vmkfstools Pei/vmfs/volumes/storage1 /.

  VMFS file system - 3.21 spanning 2 partitions.

  File system label (if applicable): storage1

  Mode: public

  Capacity 578746843136 (blocks of files 551936 * 1048576), 170295033856 (162406 blocks) prevail

  UUID: 46effbff-1c4d324f-2963-0018fefe3238

  Split partitions:

  vmhba0:0:0:3

  vmhba0:1:0:1

  I'm doing something wrong?

  Best regards

  Karel

  elkarel,

  at face value, restriction of file size is target support more than 2 GB of files on the volume.  You have a volume of external storage to test with?

  I want to move a physical machine with 243 GB drive to an ESX3.0

  You actually use ESX 3.0 with the latest version of VMware Converter?  I think that Converter standalone v4.3 has decreased for 3.0.x which means you will need to use the Converter 4.0.1.

  We also use, with some older versions of ESX and converter, to require double the amount of free space on the destination volume.  I think that has been resolved in the 4.0.0 Converter but I could be wrong.

  In addition, there was a problem earlier on the destination volume real itself.  It seems that local storage is used, but is stride across volumes (which is not very good).  There was only one conversion in NFS and the NFS Volume rejected files over 2 GB or something like that.

  Kind regards

  Jon Hemming, b.SC., RHCT, VMware vExpert 2009
  http://Twitter.com/vJonHemming

  If your question or problem has been resolved, please click the "right answer".  If someone helped him, please click "useful answer.

• stuck with the date of the IPTC core

  I usually model when not corresponding date change is not in a real and successful. Now does not work, daTE is stuck to date and the IPTC core and I can actually change from there but I prefer to change the model

  (top icon on the right)

  I have tools/purge cache for folder and restarted B by pressing the option key.

  Also in the language of tex and accounts > region, I'm in the wrong country

  Problem is I don't like the date format of the IPTC core, I prefer the 06/06/11 to 06/11/06

  Thank you

  Problem is I don't like the date format of the IPTC core, I prefer the 06/06/11 to 06/11/06

  In my opinion, you don't get a model because that fixed information and you want to have different values.

  And if you like it or not, IPTC s a global standard and it might not be a good idea to change that because other applications or users also depend on this format.

  If you want the date format you want, you can choose to do a batch rename the parameter, for example for a series of images using the format yy-mm-dd_Filename_sequencenumber.

  If you use yyyymmdd_filename_sequencenumber your files have a sort order in the finder

• Solution: WSDL shared lib error on Fedora Core 6

  When you run coldfusion on Fedora Core 6, it seemed to me to get an error whenever I tried to consume a Web service. The same scenario worked fine on my development on OS X machine but not on the FC6 machine. Read error:
  
  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: / opt/coldfusionmx7/runtime/bin/jikesw: error while loading shared libraries: libstdc ++-libc6. 1 - 1.so.2: cannot open shared object file: no such file or directory.
  
  I found a quick solution on the web that worked. The lib does not appear to be installed by FC6 and coldfusion seems to demand it instead of another version. Simply find the library libstdc ++-libc6. 1 - 1.so.2, another server, or on the web, and then copy it to: /usr/lib/libstdc++-libc6.1-1.so.2
  
  You do not need to restart coldfusion, the script should work now.

  When you run coldfusion on Fedora Core 6, it seemed to me to get an error whenever I tried to consume a Web service. The same scenario worked fine on my development on OS X machine but not on the FC6 machine. Read error:

  coldfusion.jsp.CompilationFailedException: errors reported by Java compiler: / opt/coldfusionmx7/runtime/bin/jikesw: error while loading shared libraries: libstdc ++-libc6. 1 - 1.so.2: cannot open shared object file: no such file or directory.

  I found a quick solution on the web that worked. The lib does not appear to be installed by FC6 and coldfusion seems to demand it instead of another version. Simply find the library libstdc ++-libc6. 1 - 1.so.2, another server, or on the web, and then copy it to: /usr/lib/libstdc++-libc6.1-1.so.2

  You do not need to restart coldfusion, the script should work now.

• I'm having problems trying to use the

  IM Tony, I have an iPhone 6 more and since the update, I tried to use the animated messages but seems that theres also problem with the power button. The arrow leaves no other icons appear.

  Hi Indestruct1,

  I understand that you encounter some problems that can use the new screen effects and effects in the bubble Messages application. I have updated to iOS 10 as well and I love the new effects. I'll be happy to review some information for you.

  Use of the effects of message with iMessage on iPhone, iPad and iPod touch, this article stipulates that

  You need iMessage to send from the effects of the message. If you are unsure if you use iMessage or SMS/MMS texts, learn the difference. If you cannot send or receive effects of bubbles, make sure that you haven't reduce Motion activated.

  The same applies if you can't send or receive screen effects, check that reduce the Motion is turned off.

  Thank you for bringing your question in Apple Support communities. Have a great weekend.