Problem on the editing of .dwt file model

Similar Questions

• SE "There are problems with the configuration of static files in your environment" after the APEX 5 install using Oracle HTTP Server

  There is not much information in the doc around the new configuration of static file.  Someone at - it an example of this dads.conf he file should look similar to static files?  Everything else seems to work fine - it's my only hang up now.

  Thank you!

  Exact pop-up message:

  There are problems with the configuration of static files in your environment.  Please see the section "Configuration static file Support" in the Guide of the Installation Application Express

  I figured it out on my own - the doc has a section "6.5.4 configuration Support for static file" which basically said yes, it is now supported for static files, then a "see also:" link to the dads.conf section, that I'm not good enough to see there are now 2 new parameters in your dads config file...  All is ready!  It works!  YAY!

• Error downloading Photoshop element 12: Arvato Berthelman - Download Manager error - unfortunately, there is a problem with the link to that file. This problem may be due to the number of users trying to download

  Error message when downloading Photoshop element 12: (I bought the license in a store)

  Berthelman arvato-

  Download Manager error-

  Unfortunately, there is a problem with the link to that file. This problem may be due the number of users trying to download the file, or the product may no longer be available. Please as minutes of a few in. If this privilege is still not available, please contact customer service at the address [email protected] or number 604-915-5200

  == > Les DEUX @ and phone number are fake!

  Hi Mireille56,

  The place where you are trying to download the software.

  [email protected] is not an email from Adobe Support.

  Please try to download Photoshop elements 12 of: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

  < translated="" via="" google="">

  Hi Mireille56,

  Where you are trying to download the software.

  [email protected] is not an Adobe support email.

  Please try to download Photoshop elements 12 from: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us&sdid=ZPQM

  Kind regards

  Rave

• Problem with the creation and application of models

  For somrthing that seems so simple, I'm having a problem to create and apply a template to a page only.

  First, I created a template as follows:

  1. display a full page (index.html)

  2 choose an editable region by highting the content area of the page. This excluded the header, the menu high horozontal, right bar and footer.

  3. went to 'INSERT'-> model-> editable objects

  4 name of container box editable and click on OK

  5. FILE - > save all

  The purple line was shown around the editable and the tag is displayed in the upper left corner of the combo box.

  I assumed that the combo box has successfully been created.

  Then, I tried to apply the model to a new page by using the following steps:

  1 has opened a new blank page called about.html

  2. went to: EDIT-> model-> apply the page model

  3. selection of the Model dialog box displays and I chose the region to editible (1 illustrated)

  

  4. After selecting the editable area, this displsays error:

  

  Error message reads as follows:

  Some Uea this document have no corresponding regions in the new document

  I tried several times, but I know I have to do something by mistake.

  Can someone help me in learning this task properly. Models seem to be such a powerful thing to use in development with DW.

  Thank you in advance.

  boblan1042

  Try this method:

  * FILE | New > template Page > select model > Create.

  A step by step method that works every time.  Once you familiarize yourself with the help of models, come back and I'll tell you why you receive the path you showed above.

• Error: "Canoe Photo window Viewer save the changes to this picture because there is a problem with the property of photo file" when trying to upload photos from the iPhone to the Windows Photo Viewer.

  Original title: saving photos and videos, common sense?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  JW why I can't save a picture to the top of the right way in my windows photo viewer and Media Player (same for video too) so when I download my pictures frim my iphone on the computer a few photos have been taken vertically, and when I go to put the image a gardener would come saying ' canoe photo window Viewer save the changes to this picture because there is a problem with the file of. properties of photos? What can I do to fix this?

  =============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Blue spots in the edition of RAW files.

  Hello!

  I have fujifilm camera, and when I try to process the raw files in Lightroom, the blue spots appear in the images. Never had this problem before when editing the raw files from my nikon SLR. I have a Macbook pro mid 2012 with a graphics Intel HD 4000. What can I do about it?

  This could be the shadow clipping indicator. Turn off by pressing once or twice on J.

• Fonts odd number in the edition of PDF files

  Hello

  When I try to edit a PDF file I have a few problems with the tYying numbers.

  When I type in a number (Amendment of the existing text or adding in a new text box) typed numbers are displayed in a weird font. What numbers effects as long as when I type normal letters, they are very good.

  As you can see in the screenshot, when I edit the text its fine, but the numbers of give me a strange police.

  

  I tried to change fonts on the format tab, but it gives the same results.

  Any ideas on how to solve this problem, its the full version of Acrobat unusable updated

  Thank you

  Kieran

  This position fixed it for me

  https://forums.Adobe.com/thread/1582291

  Why is - that it is activated on a clean install?

• Flickering of the screen while the edition of tiff files makes me lose all changes.

  When you edit a tiff file it causes my screen flashes, I tried with GPU power on and off and the same behavior, if I am trying to change a slider during this flickering I lose all changes to tiff. I know what is happening to more people as I've seen on the forums, this happens to me on two different one computers a MAC Pro and the other a PC.

  For example, I go to NIK and make a change and then go back and Lightroom starts flickering / refreshing and when this happens if I'm dragging a slider it will reset all the changes to this picture.

  Please help as I am unable to use Lightroom at the moment.

  Many people have reported this problem, Adobe has recognized as a bug.  See this thread in the official forum for feedback to Adobe for workarounds: a TIFF from LightRoom 6 recharge after each change, development of potential data loss.  Don't forget to add your vote and opinion to make it more likely Adobe will give priority to a solution.

• Problems with the edition of all the ones I found.

  https://www.YouTube.com/watch?v=3WhteJaObJs

  Good so I tried to get this model and to an intro for our clan game... when I go to open the project file in AE im getting the following errors... http://i.imgur.com/cllKDNp.PNG

  http://i.imgur.com/6fzksx1.PNG

  http://i.imgur.com/SjGl8H2.PNG

  http://i.imgur.com/SjGl8H2.PNG

  If you have any suggestions let me know. I pushed well and tried to do all changes I have no more errors but once read and made as well when not shaking/wiggle it is not just going fuzzy and is not good at all... Any suggestions?

  I noticed a few other questions about the comments but no answers... I tried to use another model before that and I had similar problems where the effects were not good... If you look at the intro in this model when he shakes / wiggles... basically mine is just sitting there all fuzzy on

  
  

  
  

  The message in your second post is not a problem. It's just telling you that you open an old project.

  Messages in your first post are just tell you that you have not installed effects that the project creator was installed. Ask the creator of the project on this subject.

• How can I make the editable CSS in a model created using a DW layout page?

  Hello

  I made a page of model using the model of a centered, fixed column, header, and footer.  I then

  Do the header and the content areas of the editable regions.  I left the footer as a locked region.  Now

  whenever I do a page based on this template, I can't change the CSS for all the

  regions - not even the unlocked regions.  How to make CSS an editable area so that I can change

  backgrounds, fonts, etc. of the header and the contents of the regions without changing them using the

  page template?

  The CSS is embedded in the head of the template page?  It is in an editable region he called "head"?

  If the answer to the first question is NO, then you should already be able to change any than CSS.  I'm guessing that the answer is YES.

  If the answer to the first question is YES, and the answer to the second question is NO, then you must export it to an external file using the ability to export to Dreamweaver CSS rules.  Then when you save the page template, this new CSS file link will be spread to all the child pages.  You should now be able to freely edit a CSS contained in this file.  Alternatively, you can MOVE the CSS into the editable region in the template page's head.  Since it is now in an editable area, the only change that will propagate the child pages is that the CSS has been removed, you will need to paste this block of CSS in this editable region on each child page existing.  New child pages will already have that CSS it when they are created.

• Problems with the conversion of Word files to PDF via macro

  I have a weird problem with the Acrobat add-in. I want to convert a lot of files with the Word Add-In in PDF files. The printer is no option because it causes other problems.

  So I created a small macro for Word that transforms all the Word of a directory of files PDF files. The macro works great, but PDF files look right.

  I show you the problem with a Word file, first converted manually, then with the macro:

  First of all the image:  If the file is converted manually, it seems that the Word file and fonts are included.

  

  Second picture: If the macro converts the file it doesn't seem correct and the fonts are usually not included.

  

  I use Acrobat XI and Word 2010. The macro command is:

  ' new name for PDF
  pdfName = Replace(Replace(verz & "\" & fi.Name, "docx", "pdf"), "doc", "pdf")
              ' convert Word into PDF
              ActiveDocument.ExportAsFixedFormat OutputFileName:= _
                  pdfName, ExportFormat:= _
                  wdExportFormatPDF, OpenAfterExport:=False, OptimizeFor:= _
                  wdExportOptimizeForPrint, Range:=wdExportAllDocument, From:=1, To:=1, _
                  Item:=wdExportDocumentContent, IncludeDocProps:=False, KeepIRM:=False, _
                  CreateBookmarks:=wdExportCreateHeadingBookmarks, DocStructureTags:=True, _
                  BitmapMissingFonts:=False, UseISO19005_1:=False
  

  I did not, but the trick is to realize you don't want specific action. Rather, you want to treat a directory. DOCX files in the directory will be converted to PDF, then actions (if any).

• Help. Very stupid problem with the placement of word files.

  As you can see I am a beginner total to Indesign. I don't know how but I can't place any text imported from Word into my project. Weird thing that if I create a new document it works. However, in this project I've done a lot of styles and other things so I don't want to start from scratch, so the question is:

  Is there some option "I accidentally the entire project" and is anyway to fix it. [Or maybe export styles and master pages to another document?]

  The problem with the placement of text word said that the text is too big (Red Cross).

  InDesign CS6 30 day trial.

  Post edited by: Niebieski_Mak

  Ok.

  There are a number of possibilities for what are the causes of the text immediately became excessive. Is usually only a problem with a youove of added restrictions that makes a too wide to fit in the frame line (but it can also occur if you have a set of "keep the option" which requires the text to stay together and there is inusfficient space to hold all the lines, or requiring that the text starts on an odd page / hand and the one you have is wrong).

  The most common cause is probably the wrong application of the No. Break attribute. New users sometimes confuse this to how to disable hyphenation, but in fact it prevents any text to which it is applied to break even between words. Next most common, I think, is a long text string with nonbreaking spaces between the words (I see a lot of this in Word documents), and not allowing not standard, yet once, there are no place to get out.

  I've also seen cases where the format for the text calls for a font size of very large size, which makes it impossible to fit the text, or when the dashes from left or right, in the paragraph style, override local formatting or text block options, are too large to allow the text to fit.

  The best way to find out, in my opinion, is to choose the frame then go to Edition > edit in story editor, you can see and select the text and check these things.

• Problem with the task of control of model code - execution instance remains open

  Hi Experts
  
  We have some model mappings, for which we use some similar code with the model code BUILT_IN_CT model. Mappings to run successfully, but the task of control of model code seems to remain open. It's the same thing, even if I use the code model of control by default BUILT_IN_CT/CCT_ORACLE.
  
  To see if the control task remains open, I run the script...\dbhome\owb\rtp\sql\list_requests.sql, and I get the following output:
  
  ====================
  EXECUTIONS
  ====================
  ID of the audit. State of... Name... Date of... Owner...
  16_FLOW_CONTROL LOAN 260573 19 APRIL 11 10:15:16 OWBSYS
  
  As a solution to the problem, we managed to implement a custom task jdbc, in which we are to pick up instances of this task and then close them using the owbsys.wb_rt_script_util.deactivate_execution procedure.
  
  Anyone know the reason for this problem and if there is a solution for it, other then to implement a custom task to close the open instances?
  
  We use OWB 11 GR 2 on Windows.
  
  THX
  Your help will be much appreciated

  Yes, I see now the verification element hanging out in OWB, this looks like a bug in the OWB audit management, it should not be suspended. I don't think impact on behavior, he is a piece of dangling audit data that should not exist. You can raise a bug/SR?

  See you soon
  David

• Host file backup problem after the edition of windows 7

  After edfiting the host file, it informs that you don't have permission to save in the in the location of the folder designated you edited it how save you in the original folder?  It only saves it in the documents folder

  You must run the program that you use to change the hosts file by right click and choose Run as administrator

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  http://support.Microsoft.com/kb/923947

• Having a problem with the editing of the files zip to SCORM

  I created two Captivate training using almost identical PowerPoint presentations; they are related to their respective PowerPoint presentations. However, when I publish my Captivate training in the form of files zip with the same settings, it is almost double the size of the other to be compressed. Also, when I try to download the two files to SCORM Cloud, only the file smaller can be successfully download. The larger file is rejected as an error. I think that some information is being duplicated during the zip process. Help, please.

  I would eliminate all ampersands in your file names and try again

  In addition, you publish a SCORM 1.2 and SCORM 2004 other.