Problem opening URLS

Similar Questions

• Problem opening URLS in the click box

  Hello
  
  I cannot start a file from a click box. I enter the url and deselect contine, running project. I have test the link in the preview and it works fine. However when I publish the file of the click box does not work. I click it several times and finally all that happens is the next slide appears. Something that should not happen at all.
  
  I tried using the buttons instead, again it works in preview, but not when I publish the course. I also tried selecting and deselecting her continue running Project box.
  
  Someone at - it had a similar problem? Know of a solution?

  Hi ntompkins

  Often we see problems when you try to run the project to your local computer. Could be Flash security settings. If this is the case, see if the tutorial below the help link.

  Click here to see the tutorial

  Note that this affects only playback on the local PC. If you have decided to copy the files on a web server and your users will run from there, you have nothing to worry about. If your intention is for each user to copy the files to the C: drive and run from there, then you concerns. But there are solutions if this is the case.

  See you soon... Rick

• Thunderbird 41.0 opens the default browser, but; does not open URLs

  This problem just started this week. links worked last week.
  I tried every difficulty anything remotely like what is online, all the stuff of network protocol, all add it on things, all the flaws of control... Simple problem. browser opens. URL clicked on does not seem to be passed to the default browser.
  Yes, I tried to change the browsers by default; same prob.

  Thanks in advance for your help,

  Mike
  HP Pavilion g7 - 2269wm
  AMD Quad - Core A8 - 4500M acceleration processor
  LED HD + BrightView screen diagonal 17.3 "
  Trinity Advanced Micro Devices, Inc. [AMD/ATI] [Radeon HD 7640G]
  HDMI Audio Controller Trinity Advanced Micro Devices, Inc. [AMD/ATI]
  Qualcomm Atheros AR9485 Wireless Network Adapter (rev 01)
  HARD DRIVE 500 GB
  DVD A DS8A9SH
  6144 MB DDR3 SDRAM
  Optical drive DVD
  20140730 22:58-14.04.3 of Ubuntu LTS Tahr faithful OS
  3.13.0.71 - generic kernel x86_64 ext4

  Resolved: 20151203 14:00

  When you recheck applications by default, I found that she was set to Palemoon, which is my default browser, BUT; I've also seen subsequently appearing;
  Thunderbird Mail
  Firefox Web browser
  Chromimum Web browser
  Pale Moon browser

  He started to open URL immediately after selecting the Web Browser pale moon.
  I don't remember see Pale Moon browser in the list when I posted my question.

  Anyway, there is the solution...

  Mike

• Cannot open URL in emails.

  I more open URL attached to an e-mail. The computer tells me "this operation has been cancelled due to restrictions on this computer. Please contact system administrator. " This just started happening after Microsoft updated my laptop. It is not a problem with NORTON.

  See http://support.microsoft.com/kb/310049

  Steve

• Double-click listitem for opening URLs in the Application of MAF

  Hello

  I developed a demo application in which I have a data in the arraylist and I showed in the listview layout amx. Now, on each element of the list, I superimposed golink component for opening URLs outside the application.

  Here's my amx page code:

  < amx:listView var = value ' row' = "#{bindings.generalFeeds.collectionModel} '"

  fetchSize = "#{bindings.generalFeeds.rangeSize} '"

  selectedRowKeys = "#{bindings.generalFeeds.collectionModel.selectedRow} '"

  selectionListener = "#{bindings.generalFeeds.collectionModel.makeCurrent} '"

  showMoreStrategy = 'autoScroll' bufferStrategy = 'viewport' id = "panel1".

  inlineStyle = "background - color:rgba (0,0,0,0.0);" ' > '.

  < amx:listItem id = "li2" >

  < amx:panelGroupLayout id = "pgl.

  inlineStyle = "margin: 0;"  Padding: 4%; padding-top: 2%; padding-bottom: 2%; ">

  < amx:tableLayout id = 'tl1' inlineStyle = "width: 100%;" height: 50%; "width ="100% ">

  < amx:rowLayout id = "rl2" >

  < amx:cellFormat id = "cf9" width = "100 percent;" >

  < amx:outputText id = "ot31".

  inlineStyle = "make-weight: bold;" do-size: 18px; grid-rank: auto; Color: #666666; »

  value = "#{row.tital}" / >

  < / amx:cellFormat >

  < / amx:rowLayout >

  < / amx:tableLayout >

  < / amx:panelGroupLayout >

  < amx:goLink id = "gl5.

  inlineStyle ="width: 100%; left: 0px; Top: 0px; opacity: 0.0; float: left; position: absolute; background-color: red; height: 100%; »

  URL = "#{rank." URL} "/ >"

  < / amx:listItem >

  < / amx:listView >

  Side of the problem:

  (1) I have to double-click the list item for the opening of url that I provided by the golink component. On one leg, his does not work.

  (2) when I clicked on a list item, it shows me a flag and when I double click on it, once again, it shows an indicator.

  (3) issue even with directly by double clicking it, it shows a two indicator.

  Please help me.

  Kind regards

  Siddharth

  Yes, update your js to include this

  {showJavaCallBackPopup = function ()}

  var url = arguments [0];

  If (device.platform = 'Android') {}

  navigator.app.loadUrl (url, {openExternal:true});})

  } else {}

  Window.Open (url, "_system");

  }

  }

• I can't seem to install indesign, get me the following message: no application is configured pour open URL, what to do? Thank you pour your help!

  I can't seem to install indesign, get me the following message: "no application is configured to open URL", what to do? Thank you pour your help!

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

• I am XP user window (home addition) and have recently experienced a problem open a document created with Microsoft Word.

  I am XP user window (home addition) and have recently experienced a problem open a document created with Microsoft Word. I saved the file, he sent, and trying to open it it does not allow me to do. I get a pop up saying - bar FILE CAN BE USED BY ANOTHER APPLICATION, or FORMAT of FILE CAN NOT NOT BE supported BY any OF THE INSTALLED CONVERTERS OR THE FILE is maybe DAMAGED. After you click ok in the pop-up a white prosser page for Microsoft word opens. I'm trying to accomplish creating a coupon for my wife to be able to post to its customers by e-mail.

  It may be in a format that Word can not handle. They are files DOC, DOCX, XLS or or something else?

  There is an update available for the words to open the DOCX files.

  Or you may need the free viewer for Word or Excel Viewer.

  To download Microsoft Office converters and viewers:

  http://www.Microsoft.com/downloads/en/resultsForProduct.aspx?displaylang=en&ProductID=4289ae77-4cba-4A75-86f3-9ff96f68e491&sType=n_pf

  MD MOEEN AJAZ KHAN - MCP, N +, A +.

• How can I reset my laptop to Nov.2010 - I have problems opening and send emails after January 2011

  I had problems opening and sending emails after January 2011 so I wanted to turn my back on Nov.2010

  Hello

  You cannot use the system back restore more than you have Restore Points. The only one
  Another option would be to return the system to its out of the box, as it was when
  you received. So, it would be better reset your e-mail settings and check with
  the support of your email provider.

  How to create a System Restore Point in Windows 7
  http://www.SevenForums.com/tutorials/697-system-restore-point-create.html

  How to do a system restore in Windows 7
  http://www.SevenForums.com/tutorials/700-system-restore.html

  ============================================================

  These can help with system related issues:

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =============================================================

  This is Hotmail:

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  -------------------------

  And Windows Mail

  Windows Live Mail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=15

  Windows Live Solution Center - Solutions mail - Mail Forums
  http://windowslivehelp.com/

  Windows Live Mail - mail Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=15

  I hope this helps.

• problem opening session: the user profile service failed to connect

  original title: problem opening session

  I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix

  This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.

  Is that what your error message: unable to load the user profile and the user profile service has not the opening of session

  If so, please read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a system restore first, if not help, run it
  Microsoft support tutorial below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
  the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• Cocos2dx - connection with api native (like open URL in browser)

  Hello..

  I have found no guidance about how to connect blackberry native API with cocos2dx just like Android with some jni...

  For example, to open a link in the browser of the application cocos2dx...

  A guide to this topic will be very useful

  Sorry for posting to do before...

  In fact lately, I realized that this cocos2dx is based directly on Blackberry native sdk... It is not necessary to have a bypass between core native API and cocos2dx...

  And we can directly use native c and c ++ API...

  Want to open url now using class b/s/navigator...

• I couldn't find 'Open URL' on Windows Media Player.

  Microsoft Community, good day,

  I couldn't find 'Open URL' on Windows Media Player, if I can get the direction where it is.
   
  In anticipation of your support.
  Respectfully,.
  Filip CIKLEVSKI

  On mine, "Open URL" is in the file menu.

  If you don't see the file menu, then:

  and tick "Show menu bar". Then you should see the menu of old style etc.

  Click on and the options are , etc.

  You can also if you don't want older menus showing:

  1 open WMP, press the then the key and the menu should appear.

  or

  2 simply type together (i.e. Control AND u touches at the same time)

• Problem opening files in MS Paint

  I'm running Windows 7 Ultimate on an ASUS Gaming Notebook aged 2 years.  All installed software is set up to receive the latest updates.

  
  
  About 3 days, 24/09/2012, UTC - 6 h, I started to experience problems opening files inside MS Paint.  Recently used files open without problems, but when I used the drill down menu file and clicked Open, the File Manager window opens but seemed not completely.  It stops before you post content in the panels on the left or right.  After waiting almost a minute, an error window opens saying that the Paint program does not react with the choice of activation of one of the 2 buttons, Debug or Cancel.
  Despite my system restarts and run virus scans, nothing seems to be broken.  I did, however, go through the Event Viewer to see what specifics have been involved in these accidents.  As I'm not a programmer or remotely competent in any language of software, the only elements that makes any sense to me were mspaint.exe & explorerframe.dll mentioned in Application event error reports as well as a series of numbers. (I also made the applet of Quicktime, 22, do not overwrite my selections of extension of file to default, programs installed that I read in another forum, it tends to do with files visual & audio) So now, I have several issues with that I hope other posters can help me:
  • Everyone knows that I have here and have been able to solve it?
  • Is it possible to uninstall, and then reinstall the paint? (I don't want to do a restore system b/c my last restore point was in April).
  • Any of you know how I can repair this situation or even help out there so I could fix the problem myself?
  • Is it possible to have reported this instance to Microsoft somewhere other than the generic return route?

  Thank you very much for reading and doubly so if you can shed some light on this dilemma.

  MaryBeth

  A restore point can be created manually, but when you use windows update a restore point is often automatic created in the update process.

  Simply type 'Restore' in the search text box programs & files, double-click the shortcut to "System Restore" which results in and follow the instructions (note the show more restore point box)

• Problem opening of files from the two account email, secondary remembered as HDD and USB memory-based external excel...

  Problem opening of files from the two account email, secondary remembered as HDD and USB memory-based external excel. Message warning "there was a problem sending the command to the program".  I use Windows 7, version studend of microsoft office 2007.  This problem does not exist when I use the same USB on the desktop (XP)

  You should not actuall open/edit an attachment or a file on a USB drive, the file must be saved to a document on the PC first and opened/edited location.

  http://support.Microsoft.com/kb/211494

• Problem opening excel attachment on Windows 8 of Yahoo mail

  I have upgraded to Windows 8. In that in the emails and accounts, I added my Yahoo account also. But whenever I get the excel (.xls) attachment on my Yahoo! account, that it does not open if I access my Yahoo account through the start of the Mail option screen. However, if I go on Google chrome and search of Yahoo mail and you connect and open my account then the attachment opens there. Why does this happen?

  Hello Sanjana,

  Thanks for posting your query in Microsoft Community.

  I would be grateful if you could provide us with the following information for a better understanding of the issue:

  1. The problem only occurs with excel or word as well?
  2. What is the error message that you get so that opening excel documents via the mail application?
  3. Are you having a problem opening excel attachments via the desktop version of Internet Explorer?

  I would suggest trying the following methods and check if they help:

  Method 1: I suggest you run the troubleshooter App from the link and if it helps.

  http://go.Microsoft.com/fwlink/?LinkId=268423

  Method 2: I also suggest you to follow the steps from the link and check if the problem persists.
  What to do if you have problems with a soft
  http://Windows.Microsoft.com/en-us/Windows-8/what-troubleshoot-problems-app

  Please, try the above methods and return with the required information.

• Clickbox Action opens URL in the preview, not when I publish?

  Hi all

  I created a project in Adobe Captivate 5.5 which consists of three slides. Two slides accompanied by boxes click with action "open URL". When I saw the Web from Captivate, URL links work browser project, (although slowly...) When I click on them, they open the URL.

  When I publish the project to a folder on my computer four files copy: .htm, .swf, skin and standard.js .swf. When I open the project in a mouse and web browser click areas, they do nothing.

  I don't understand. Hints would be appreciated.

  Thanks in advance for any ideas,

  -Leslie Everett

  Probably you produce output SWF. This means whether you are viewing via Flash Player.

  Unless you plan to copy the output to each individual computer, don't sweat it. Flash Player blocking the way. Once you download on a web server and view it from there, things should work correctly.

  See you soon... Rick