Problem publishing documents to Word 2003

Similar Questions

• Conversion of word 2003 documents. in PDF Adobe Acrobat 6.0

  I tried to convert documents from word 2003 with adobe acrobat 6.0 and I was not able to do. I can do that in excel and power point, but not in word. Can someone help me?

  Thank you

  It would be useful to know how you try to do the conversion. Try to print to the Adobe PDF printer.

• Number of Word 2003

  While working on a document in Word 2003, my cursor flashes continually cursor hourglass and back to cursor. Also, when I use the arrow keys to move the cursor, the cursor jumps to different sections of the document. For example. When I use the left arrow to move the cursor backward, the cursor will either jump 5-6 lines down or line 5-6. No idea how to stop this?

  Hello Rob 1414.

  Thanks for posting your question on the Microsoft answers Forum.

  Is your only problem in Word 2003 or in any application?

  Most of the time, you will see problems with the cursor jumps because of the sensitivity of the mouse.
  So first I try and see if the speed or sensitivity of the mouse will help with your problem.

  It's a laptop with a touchscreen? The usual reason is that the touchpad is hypersensitive and simulates a mouse click.
  You should be able to desensitize the touchpad or disable the option to click under the touchpad. These settings are usually
  shown as an applet in the control panel.

  You can also try and see if you have word wrap active, as a test, try to disable it temporarily and see if there is an improvement.

  Please post back with your findings and let us know if it helped to solve your problem.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I have a Flash drive with Word 2003 documents and my computer has now Word 2010, how to change these documents to Word 2010?

  I need to change from Word 2003 to Word 2010 documents located on a flash drive. Not very computer savvy!

  Hello

  You can follow the steps and then check.

  Step 1, Open the Word file.

  Step 2, Press Office button at the top left, go in record under and choose Word 97-2003 Document.

  Step 3, enter a new name in the file name field, or simply use the same name in the original .doc file.

  Step 4 click Save to convert doc to docx, in seconds, the file will be viewed in the format .docx as soon as the conversion from Word 2003 to Word 2010.

  If the problem exists, you can ask your question in the forums Office to improve assistance in this regard.

  http://answers.Microsoft.com/en-us/Office/Forum/office_2010-Word

• Page numbers appear as 5 1 and 2 of 2121 in a PDF file created from a Word 2003 document

  Merge us several Word 2003 documents into 1 larger document that we have and then convert to PDF format.  In the Word document page numbers display correctly - 1 of 21, 21 2, 21 3, etc.  We then convert this merged to PDF document by double-clicking the file name and choose "Convert to Adobe PDF".  For those of us with Adobe Acrobat Standard 8.1.3, page numbers in the converted PDF file display as 1 of 1, 2, 1... 21 of 1.  Those with Acrobat Professional 8.1.3, they appear as 1 of 21, 2121 2, 3 of 212121, etc., each page by adding another number of total pages in total.  There is no change in the result if using v8.0.0 or 8.1.4 anyone have ideas?

  Open the Word document merged and printing to the Adobe PDF printer worked!

  We had tried to launch Acrobat and create the PDF that elsewhere, but there was no difference. Never thought to try to print to the PDF printer...

  I'll also try the upgrade of my office for 2007 and see if that solves the problem, allowing us to "convert to PDF".

  Thank you very much for your help, Bill.

• MS Word 2003 - highlighting of problem

  Hi, I have a problem with Word 2003, I have in the Office 03 pro edition.

  When I drag the text in selection, type something and does not replace it, it pastes just the new text in front of the selection. Pressing return back also is not delete it. the only way to remove the text is struck Del before typing anything to select. I tried to put my office to repair CD back in and hit, and I tried to hit reinstall (which replaces all files and probably the registry data without having to uninstall first, it no differently to a new installation done work around the stuff of product keys and go to the validation of the previous installation), but after one of the people the problem is still there.

  If someone had a similar problem or did someone knows a solution?

  A similar problem happened on my laptop and it was only a problem of setting.
  If the Overtype option is activated in the word the text will be supplanted (deleted) during the strike.
  If you want to use this option, you will need to enable it. The option is called short OVR.

  If you want to learn more about this similar function I advise to use the help option that is located above the toolbar.

• Contains the context menu is no longer an option to create a new document in Word 97 - 2003

  Contains the context menu is no longer an option to create a new document in Word 97 - 2003

  Hi karim,.

  In addition, I suggest you to check if the help of this article . It has been suggested to you in your previous thread here.

  I hope this helps!

• Problem with the registration of a Microsoft Publisher Document

  I encountered a problem with save a Microsoft Publisher document in PDF format.  I built the file with color photographs and then recorded then I changed inside page photography photographs black and white and registered with the designation of BW in the title.  I have the file in two forms: one is full color, and the second is a combination of color and black and white.  When I save the file with the black and white photos inside as a PDF, it saves as color.  No matter what I do, they keep coming to the top of color.

  I spent more than an hour in a meeting with Microsoft Technical Support, and pointed towards Adobe as having the problem.

  The file with photographs n & B are sent to an external commercial printer.  We cannot do printing in full color, and when they print the color and b & w, they look terrible.

  So he comes to solve the problem with saving the file in PDF format.

  Can you help me?

  I thinI think that your problem was caused by an update. Not Adobe software, not Windows, but for the Publisher. Logical, since the Publisher deploys the file. Here is a discussion Community of Microsoft . Best of all, Microsoft have a new fix for this, apparently. Make sure you know how to check the version of Publisher you run and decide if you want the automatic updates to it.

• After I exported a PDF (written in Hebrew) in a Word document, the Word document is written in mirror writing, how can I solve this problem?

  After I exported a PDF (written in Hebrew) in a Word document, the Word document is written in mirror writing, how can I solve this problem?

  This is a known bug in Acrobat. The conversion of PDF to Office documents was never designed to deal properly with the languages from right to left like Hebrew, Arabic and Farsi. There is no work around at this point.

  -Dov

• Problem of SkyDrive open word documents in word

  IM currently having difficulty opening documents in word. they were oping in a notebook and I can't change anything how do I change this setting?

  Hi Karri,

  You open the file from the Web OneDrive site, or folder on your computer?

  If it is the folder on your computer, you can do this:

  1. Right click on the file and choose "Open with" then "choose default.
  2. Select the word in the list, and then click OK

• My Microsoft Word has stopped working. I went to open a document in word, and he said "there is no default application specified to open the document". When I went to look up Word as my default application.

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your coMy Microsoft Word has stopped working. I went to open a document in word, and he said "there is no default application specified to open the document". When I went to look up the Word as my application by default, it is not found. Excel, Powerpoint and Entourage were all there. So, I went to my office... See the word icon and then click on it. When I click on it, a question mark appears above him, and it does not open. It's as if the word has been removed from my computer. I read support a few sites that I Googled, and one said to drag the question mark on the icon and then turn it back on. When I did that, he dragged the icon with it... and when I published it, the icon is now not where. I need help restoring Word, I have no idea where he went! computer
  • What you al

  Hi chrssy07,

  Thanks for visiting the site of the community of Microsoft Windows XP. The question you have posted is related to Microsoft Word and it will be better answered by a Microsoft Office Support Professional.  Please visit it Support technique Microsoft and select your product for support.

  Please let us know if this helped.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot print from Word 2003 using Epson Artisan 800 all-in-one printer

  Hello!
  Using Vista Home and Office 2003 with Epson Aritsan 800 connected by USB.  When you open a Word 2003 document, get pop up msg:

  "The printer has not yet responded, but the Microsoft Office program may be able to move forward without printer information.  Do you want to continue to wait for the printer? »

  I select 'no '.  The document opens.

  Then try to print from file / print - it finds the printer printer "EPSON Artisan 800 Series", but give the same message as above: (.)

  After 20 min of combat and by selecting several times, it finally will print, but slowly.

  Any ideas or help to solve?

  Thank you!

  PS - All current print drivers have been installed.

  I know that its an old thread, but I can't find solution s everywhere on the web for this
  However, I am happy to say I've cracked toay.
  Its a corrupt police. I deleted the content of the c:\windows\fonts folder and then replaced from another machine
  It works now!
  Machine, I had to fix was running WinXP HOme / Offcie Pro 2003, but no reason why it will not solve the problem on a newer OS

• the documents become read-only when I download a document in word 2007

  I'm losing my mind on that, and it's impact on my work (and income). I have windows vista and word 2003, excel 2003 on my laptop. Whenever I have download a word 2007 document (I don't even register on my computer, just download it), ALL of my word and excel docs permutation for 2007!

  They become read-only!
  I have to solve this problem as soon as possible, as I have so many docs that I need to access and change for various reasons that are related to employment.
  Help, please!

  A version of Word 2007 came with the computer, for a trial period. I used it and never sent payment for the product key. I wonder how much it would cost? But anyway, I don't want to buy 2007 when 2010 is out. I probably still have the same problem with the docs 2007 reconfiguration to 2010 docs.

  Well, I think I have your situation sorted.

  You should go to the Control Panel programs and features and uninstall the Word 2007 Home and student if it is a trial. Uninstall the 2007 activation assistant as well. Restart the computer.
  After the computer comes back up, get back in programs and features and perform a repair on your Office 2003 Professional. This involves the selection Office 2003 Pro and clicking change above the list of programs. On the first screen, select repair , and then click continue at the bottom right. Go through the process normally, clicking Next or OK as required.

  This repair procedure will restore all your associations default file for the Office 2003 programs.

• Word blocks middle of creation of PDF - Word 2003 Acrobat 9.3.0

  I have a new PC and a clean new installation of CS5 Design Permuim, including 9 Arobat. The organization is still using Office 2003 and no path upgrade in sight for this. Myself and several colleagues with the same profile of software are currently experiencing frequent problems with Word crashing. PDF creation environment

  This has always been a problem with the ocassional Word file in Acrobat 8, but the Distiller has always worked as an alternative - NOT this time!

  PDF Maker gives no error message, just that Word has encountered a problem and needs to close.

  Distiller produces the following message, and then completely freezes. Then I have to force quit Word to leave!

  _______________________________________________________

  %% [ProductName: Distiller] %.
  %% [Error: syntaxerror;] [OffendingCommand: - nostringval-] %.

  Battery:
  /mF_OTF_V

  
  %% [Flushing: rest of job (end of file) will be ignored] %%.
  %% [Warning: PostScript error.] No PDF file produced. ] %%
  _______________________________________________________

  Not all documents are affected, but I can remove almost all of the content of the infected document and it always causes the error.

  I tried to repair Acrobat - no change.

  Another strange symptom - after each accident, the default printer on the computer has changed in Adobe PDF format.

  I can do successfulkly the PDF document on another computer that has not been upgraded to Acrobat 9. The rest of the settings are the same on both machines, they run both an environment standard organization, with the same verion of the word etc.

  Can anyone suggest how to fix or at least isolate the cause of the problem?

  Please update to the latest version of Acrobat 9 which is 9.4.2.

  Also know us

  (a) office 2003 flavor: Standard or professional?

  (b) OS flavor? Also if it is 32-bit or 64-bit?

  Also, as you have mentioned that "not all documents are affected", so we would need one of your file assigned to analyze the issue. Can you please share the file? You can use acrobat.com to share the file.

  Thank you

  Vishal

• Export the project to Word 2003 - error

  I have difficulties to export Word documents my Captivate project so my subject matter experts can verify the content and provide feedback.

  The error is attached. Any ideas on how to fix? Help, please.

  Hi again

  I am at a loss to explain why the documents printing option is a failure. Of course, I used Word 2003 to do before without problem. (Now, I use Word 2007)

  Out of curiosity, are you able to use the export option? Have you tried?

  Click file > export > captions and subtitles project

  My gut says that you will probably see the same behavior. For some reason, it seems that Captivate just for some reason is not 'feel' Microsoft Word on your system. But certainly, it won't hurt to try.

  Something weird about your Setup? For example, oh we use Word, but it's a copy shared on a Citrix server. Something like that.

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks