LaseJet M1530 MFP: Cannot install printer multifunction LaserJet M1530 on Windows 10 drivers

Similar Questions

• Cannot install printer HP Photosmart 7350 on Windows 7

  I HAVE WINDOWS 7 ON MY COMPUTER AND I AM TRYING TO INSTALL MY HP PHOTOSMART 7350 PRINTER AND I'M NOT SURE IT CAME WITH A DISK AND WHEN I TRY TO ADD A NEW DEVICE IT JUST CONTINUES TO ME SAY THERES NO PORT OR SOMETHING... I'M NOT VERY GOOD WITH THIS STUFF AND I JUST NEED SOME ADVICE ON HOW TO INSTALL MY PRINTER AND ITS NOT NOT LET ME :(

  If you had visited the HP support website and search for your PC, you would have found this:

  "Right now, a feature complete Windows 7 driver solution is not available for your product."

  However, a printer driver compatible for your product is provided with the Windows 7 operating system. There is no need to download any additional software.
  Follow the steps in this document to identify the product-compatible printer driver, install the driver and then set it up in Windows 7. When this driver is installed, you can use the basic functions of the product. »
  Further reading would show that you should choose the Deskjet 5600 driver.  Here is the entire page:
  http://h10025.www1.HP.com/ewfrf/WC/document?docname=c01796821&CC=US&DLC=en&LC=en&os=4062&Product=72886&sw_lang=

• I get a "cannot install printer because a policy has been enabled on your computer that blocks NT 4.0 driver ' how can I install my printer?

  I have a HP Pavilion dv6500 running Vista 32 bit. I just bought a new printer, a HP Photosmart C4640, when I tried to install and connect I get a message indicating that it cannot install printer as a policy has been activated this block driver NT 4.0. I have run all updates of software and drivers, but still get this message. I've been at this for almost a week now. I've been doing the HP race with regard to aid. I am VERY fusturated at this point and desperately need help. What should I do to make this work?

  Hi jessheffernan2003,

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Note: Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information, see the link below:

  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.

  http://support.Microsoft.com/kb/931719/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Standalone Driver for printer HP Laserjet 4000 for Windows 7 x 64

  Hello

  Please help me find the driver for the printer HP Laserjet 4000 for Windows 7 x 64 (package) autonomous.

  I am trying hours now to find. I'm so frustrated.

  Link by link, do not get any closer. All text and links, and no driver at the end.

  The cat does not work because it is not happy with S/N, or model number.

  Email support opens the Chat window.

  Thanks to all those who want to help.

  Carolinne

  You are the very welcome.

  I guess that's what you have to do unless you can connect your PC to the internet.

  You can also download the stand-alone update from the Microsoft update catalog to another PC and copy to that you have the printer using a usb flash drive or you burn on a CD.

  http://catalog.update.Microsoft.com/v7/site/search.aspx?q=HP%20laserjet%204000

  I guess you want the PCL6 driver.

• OfficeJet Pro 8600 Plus: Officejet Pro more than 8600 - cannot install printer on Windows 10

  I have upgraded from Windows 7 to Windows 10 and CANNOT install the printer.

  After the upgrade, the HP software prompted me to reconnect to the printer.  I chose for a wireless connection.

  The process hangs / locks the screen shown on the picture below.  I have tried just about EVERY related solutions posted in the community and have come-up-small.

  Did anyone else out there having the same problem?

  

  hjs_19... Thanks much for the reply.

  I was finally able to solve the problem using 'Reset this PC' in Windows 10 - see pictures below.

  My system has been corrupted somehow.  I don't know what was the cause, but the system works better than ever now (Lenovo T430 8 MB of RAM).  The process of 'Reset this PC' purged MANY foreigners "tricks" of the machine.

  

  

• Cannot install printer using Add Printer

  Cannot use add printer to install the printer.  I have the windows disc and reach a point which requires a disc HP.  How to find who have no idea.  And the installation process stops.

  famman,

  Unfortunately, if the printer is out of warranty there is no way to get free phone support, you can choose the charged incident. If you have a few options, take a look below:

  1. try to install the printer on another computer running XP.

  2. try to set up a secondary connection (Ethernet) option see here: installation of the software product in Windows XP to a network connection wired (Ethernet)

  If you try them without success, then I suggest contacting phone support.

  Thank you

• Cannot install printer solutions Center

  for a week I tried everything to install my all in one printer (F2400).

  That's what I do:

  I have uninstall all files via congurationscreen (remove programs)

  Clean computer with avg pc tuneup and regcure

  I run install (as admin) witch downloaded folder has been chosen for me by hppiw program

  During the configuration phase it is following error:

  Appdata/temp/TzS1867/hpzsetup.exe

  "irreparable error during installation"

  and the program says it automatically uninstall files, but they are always in the hp folder.

  printer and scanner work fine, but there is no solution Center.  There is no file .exe for solutioncenter in

  ProgramFiles/hp/digital imaging/bin

  I tried all possible solutions on the web, but nothing will.

  This link is no longer valid

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  I can do more / I've done wrong?

  This link is no longer active

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-77737-1&LC=en&DLC=en&cc=us&...

  Hey @brommmmm,

  One thing we know for sure is that your computer and the printer doesn't seem to like. I think that there are problems with your registry that are causing all these different errors, especially since the error log for the program installation continues to point to the registry key: HKLM\SOFTWARE\Hewlett-Packard\Install\ {BCDD692B-17 2D-440-9A1B-501C71D72CC8} for permissions problems. I have a little more suggestions to solve these problems in System.

  Step 1: Uninstall your printer software and drivers

  Step 2: Run the CCleaner on your computer to fix registry issues:

  CCleaner

  Step 3: Unlock hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / Active: Yes and press ENTER.
  5. Then, restart your computer
  6. When your computer turns back on, you should be able to log in to the new administrator account that appears. This account will not have a password on it.
  7. If your computer will automatically connect to your normal spending users user account and log on to the administrator account.

  Step 4: Install printer:

  1. Once you are logged into the new account administrator download and run the installation of your printer: HP Deskjet F2400 all-in-One series Full Feature Software and Driver
  2. Start the installation of your printer.
  3. Once the printer installs successfully log on the administrator account and log in to your normal user account. The printer should now be installed on your normal user account.

  Step 5: Disable the hidden Admin account:

  1. Open the display Start again by clicking the Windows start at the bottom of your computer screen icon or by selecting the Windows button in the bottom left of your keyboard to the right of the Ctrl key.
  2. Once the splash screen opens, type command prompt
  3. Once the result of the search for the command prompt appears, do a right click on it and "run as administrator"
  4. Once the command prompt opens type: net user administrator / active: No. and press ENTER.
  5. Then, restart your computer

  Please respond and let me know if everything works now. Fingers crossed!

• Cannot install printer

  Hi there I downloaded hp print driver and couldnot install printer as file window that don't know what it is I might have uninstall a program that took the missing prn file or / file prn but initially every time computer I see yellow signal in tools sysdtem Device Manager tried to restore the computer but restore has been checked , I don't know how, but here it is.

  can you help me please

  Hi there I downloaded hp print driver and couldnot install printer as file window that don't know what it is I might have uninstall a program that took the missing prn file or / file prn but initially every time computer I see yellow signal in tools sysdtem Device Manager tried to restore the computer but restore has been checked , I don't know how, but here it is.

  can you help me please

  http://michaelstevenstech.com/XPrepairinstall.htm

• Cannot install printer only for my HP photosmart psc 2510xi

  need help to install my printer facsimile copyer no

  Hello

  1. what happens when you try to install a printer?

  2. do you get an error message?

  I suggest to consult these links and follow the instructions in the link below and check, if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/find-and-install-printer-drivers

  It will be useful.

• Cannot install printer HP PSC1400 on Windows 7 64 bit

  I had the printer above installed on my old PC which ran from Windows XP. I just bought a new PC that has windows 7, and when I try to install my printer on the CD I get a message saying that I must have admin privelidges, I do. When I look at the installation CD, it says compatible with up to XP - I wonder if this is the problem? Any helpful suggestions would be highly appreciated, apart from "buy a new printer!

  There is no package compatible drivers for your printer under Windows 7. The printer drivers are InOS drivers, which means that they install with the OS. All you have to do is to connect the printer to the computer with a USB cable. You will be able to print and can scan using Windows Fax and Scan or Windows Paint.

  How to perform a scan: Windows 7

• Cannot install printer Canon MX 726

  Installation. Support 5101. asking for the removal of material on door-under the front flap RH, there a small black sqare, if it was like really stuck rempved on? Also impossible to download the disc.

  Hello

  If this isn't a driver problem there is a problem of setting or material and you
  need to contact Canon.

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, online documentation, and
  drivers.

  Good luck, you need to update or reinstall the latest driver.

  Canon - PIXMA MX726 - software and drivers<- select="" your="" version="" of="">
  http://search-au.canon.com.au/canon__au_en__au_en/search.x?q=&ie=utf8&cat=0&d=DOWNLOADS%09Windows+10+%28x64%29&ct=Support&imgsize=1&pdf=ok&zoom=1&hf=category%09zubaken&cf=model_sm%3APIXMA+MX726&modelName=PIXMA+MX726&ref=search-au.canon.com.au&pid=w6YmqOMtBhRIscFoO5ivxA..&qid=Af7zzD9H48oQ1mI8d_B4lRC7j2s5IqGL&pagemax=30&page=1

  This is the USA and Australia similar aura.

  Canon - Support and drivers USA
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  ====================================================

  The main issue is probably the drivers, but these can help:

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Open the printer Troubleshooter
  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Find the manufacturer's Web site
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-website

  Find and install printer drivers in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• HP LaserJet P2015dn: Cannot install my HP LaserJet P2015dn

  Hello, I couldn't install my printer on Windows 64-bit 10. My printer appears as a "unwnown" device and the device manager says that "a request for the USB device descriptor has failed." My printer is connected to the PC via the USB port. I tried to install official drivers from HP web page, but my pritner was not on the list when the installation wizard asked me to choose my printing device. I also tried unplugging all my usb devices and restart my pc, without success. Thank you for your replies,

  Jan Mayer.

  Hi, dungleviet,

  I tried what you told me, without success. I did, however, find the problem. It has nothing to do with drivers. My printer cable is not long enough to be connected to my PC, so I have to use an extension. When I tried the printer on my laptop directly (without extension cable), windows downloaded drivers on itself end set the printer up and running. This means that the problem was in my cable. This should be a lesson for everyone with the same problem: "chceck your * beep * cables.

  Thank you for your answer, I consider that this problem is solved.

  Jan Mayer

• Cannot install the scanner (Epson Workforce 500) Windows 7 driver

  I have an Epson Workforce 500 multifunction printer, copier, scanner, fax, which worked well in the past, but the scanner no longer works.

  I tried several times, following the line (and by telephone with a technician of Epson) instructions on downloading and installing the printer updated and drivers scanner Epson.  However, always, the installation stops and the message that drivers cannot be installed (and then restart and try again message appears).

  I was able to get the printer to work by plugging the USB cable to the printer and allowing Windows Installer the driver of the ESC/P-R, but the scanner does not work, and I did all the other characteristics of the available printer.  When I try to get the latest driver via the printer preferences, I get the message that I have already installed the most recent driver.

  More recently, I used the Troubleshooting Guide for the Epson, up to the point where it is said: ' Click or Start and select programs or all programs. "

  Select Epson or Epson printers, select your printer folder, and then select Epson Printer Software Uninstall. »

  When I do this, the program from the start menu does not have the listed Epson printer, or it displays the option to uninstall the printer.

  In addition, when I go into Control Panel, uninstall a program, the Epson printer is not as an installed printer.

  I tried once more to install the driver downloaded from the Epson site package and again, has received the message that the driver could not be installed.

  Then, I used the window update to install all the updates Windows 7, deleted the Epson printer, reconnect the USB cable and restart the computer.  Once Windows has installed the ESC/P-R driver, which she says is the last available.  I'll let it go and just not use the scanner if I can't get this resolved.

  Before you install go to start, make right click on computer, click on properties and the system window will open, left eye for click Advanced settings open then click on the Hardware tab, click installing driver and assigned to the let me select never install Windows update, and save at the bottom. You can set it back by default later if you wish. Now install the downloaded driver, have turned on printer, but do not connect the USB cable until you are prompted.

• Cannot install hp 1300 series on the Windows 7 operating system

  I just got a new laptop with Windows 7.  The installation disc contains the operating system is not compatible and that's why it cannot install it.

  I tried to change the compatibility by changing the request of Vista installation file. Still will not work.

  I tried to install directly from the laptop but my printer is not - he is online and says he cannot access at this time. Try again. (I tried again and again)

  I searched for HP PSC 1300 series all-in-one on the HP website and it is not found.

  Help, please.  I don't want to buy another printer when this one works very well (well, he did on my old computer)

  Thank you

  Use the link below to download the software for Windows 7:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=Al-75052-1&LC=en&DLC=en&cc=us&OS=4062&product=374568&sw_lang=

  Download and save the driver on desktop screen. Make sure that the USB cable is not connected to the port on the computer before you start the installation of s/w. If the same error on the subject not compatible operating system, press on and hold down the CTRL + SHIFT keys on the keyboard and click CANCEL on the error message.

  It ignores the error and we will install the s/w.

• Printer HP LaserJet 4000 w / Windows 7.

  My old computer crashed. My boss bought a new w / Windows 7. He had not my printer on it, I transferred it to use, but now it will not print gridlines of the Excel program.  Is there something I can do?  She'll often tell me that the printer driver is not installed, so I'll go through the process again.  Still no gridlines.  Anyone know what I can do?  If anything like that?

  Hello, Michelle.

  (1) install the printer driver.

  Uninstall, reboot, and reinstall Excel

  Try printing again

  (2) If Windows does not automatically detect and install the driver, or if you have already installed the base driver and try to activate the functions of basic printing on a network, you may need to add using devices and printers (formerly add a Printer Wizard) in Windows. For more information, go to install the printer through the Windows 7 operating system driver (c02536257) (in English).

  Try printing again
   
  To resolve this problem, run the driver setup in compatibility mode. Alternatively, use an account that has administrative credentials to run the driver installation program. You can also locate the driver .inf file and then manually install the driver.
  http://support.Microsoft.com/kb/927524
   
   
  
  (3) install the 5th PCL and PCl 6 beams found here
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=14952&prodTypeId=18972&prodSeriesId=25474&swLang=8&TaskID=135&swEnvOID=228
  The PostScript driver package can be found here
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=14952&prodTypeId=18972&prodSeriesId=25474&swLang=8&TaskID=135&swEnvOID=24
  Choose between the three pilots and determine which prints the document using Excel
  HP Laserjet Plug-and-Play package
  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=3422474&prodNameId=3422475&swEnvOID=2093&swLang=8&mode=2&taskId=135&swItem=ly-59012-2
   
  If you do not have the installation CD, try to order it from here
  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=14952&prodTypeId=18972&prodSeriesId=25474&swLang=8&TaskID=135&swEnvOID=18#170
   
  Finally, what version of Windows 7 use you?  You will want to perhaps download and install XP Mode with Virtual PC
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx