Similar Questions

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• Problem reading the PXI-2503 channels above 23 in mode 1 wire 48 x 1 Mux on Linux

  I can't get the above relay stations 23 in mode 1 wire 48 x 1

  % nilsdev | grep 2503
  OR PXI-2503: "Dev1".

  The topology is set on "2503/1-Wire 48 x 1 Mux ' via the following API, using the 'Dev1 '.

  DAQmxSwitchSetTopologyAndReset (device, topology)

  In theory this means there are 48 relay individual that can be read, however, fails the following:

  SwitchName = "/ Dev1/ch47.

  DAQmxSwitchGetSingleRelayPos (switchName, & pos)

  The error returned is:

  DAQmx error: relay name is not valid.
  Relay name: ch47

  State code:-200202

  who is

  #define DAQmxErrorInvalidRelayName (-200202)

  I can't get the relay station for foregoing relay 23 (/ Dev1/ch23)

  Which is the expected behavior, or is there a hardware or driver problem?

  When you use this switch in "1-wire" mode, we break essentially each (+) / (-) pair in their own channels.  Since this topology uses switches bipolar, only throw which individual terminals cannot be activated independently, another switch is introduced in order to decide which side of the switch is consulted at this very moment, (+) or (-).

  Instead of having 48 simple jet unipolar or bipolar, we have 24 bipolar single jet and two-way to decide what polarity we are referencing a single pole.  You can still use this topology in mode 1 wire 48 x 1.

  To switch manually using relay DAQmx controls, you need to specify the channel switch and polarity as Maggie mentioned.  When you call ' DAQmxSwitchConnect/Dev1/ch47/Dev1/com0', the driver knows that he has to close the relay 24 ch in more 'HLSELECT' AND "1WIRE" route only positive (effectively ch.47).

  The document NOR switches help contains a more detailed explanation of the topology if you access devices > NI PXI-2501/2503 >

  1 wire 48 × 1 Multiplexer topology.

• Problem reading the buffer full

  I made a simple VI and it works pretty well. The only problem is that when I give it some commands that I can't read all of the buffer. The best example is based on the command 'instr name' the answer is supposed to be "instr name / SO2 Analyzer / monitor SO2" (with the / a new line). However, when I press the button the command execute, I get only the first part of the answer, and then when I press once again I get the second part, and so on. Is it possible to ensure that the whole of the buffer is read?

  Any help is greatly appreciated

  Look for VISA help configure a Serial Port. See the entries called "Termination character allow" and "chariot of termination? When set to true, the option enable playback VISA expires as soon as the tank of the term (default is 0xA or LF character). You will need set the option activate to forgery and just the VISA to the Serial Port bytes.

• Error: "" Windows Media Player has encountered a problem reading the file' when try to play a music video.

  Original title: "Windows has encountered a problem during playback of the message to the file.

  No one knows why, I received this message trying to read a music clip of Mediabase on my computer which already includes Windows Media Player 11 as part of the Windows Live package?

  My HP desktop computer is only 8 months old and is running IE8 and Vista.

  Thank you!

  Hey Marv,

  What is the file format of the video music?

  You can follow the steps in this link & check if the problem persists:

  Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• I have a problem with the slider to jump on the computer.

  Original title: I'm going crazy typing anything!

  When I start typing my continuous typing to jump around and inserting what I'm typing in the wrong places instead of simply continue typing as it should.  I don't know why or how to fix it, but I'm going crazy typing anything!  If you know how I can fix this help please!

  Thank you!

  Deborah

  Hello Deborah,.

  Thanks to join Microsoft Community where you will find all the required information on the Windows operating systems!

  When you type, the cursor jumps.

  The problem may occur due to the speed of the pointer mouse inappropriate or if the sensitivity of the touchpad is too high.

  To help you better, we need more information.

  What is brand and model computer?

  To work with the issue, I suggest you follow these steps:

  Method 1: Hardware store

   

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update mouse drivers

   

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  Method 3:

   

  Change the settings of the mouse pointer.

   

   

  Refer to section to change the mouse pointer works on the site:

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-in/Windows7/change-mouse-settings

  Method 4:

  If you use a laptop, change the sensitivity of the touchpad.

  See solving problems with your touchpad in more options in the site:

   

  Mouse, touchpad and keyboard with Windows problems

  http://Windows.Microsoft.com/en-in/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  I hope this helps. If the problem persists, or if you have problems of Windows in the future, let us know and we would be happy to help you.

• problem with the slide show running javascript on a page that uses an inclusion

  Hi all

  I'm new to PHP, and if this is the wrong forum to post, if you would redirect me please, I would be grateful.

  I have a file that I call menu.php.  Inside this file, I have a menu accordion based on jQuery.  It works very well. I use an inclusion in another page, called "chair.php." As a first step, the menu jQuery works very well in the chair.php page, and I use <? PHP include ("menu.php");? >.  However, I'm running problems when I try to add a jQuery slideshow called 'pikachoose' in the chair.php page.  It seems that the slideshow cannot work properly if the menu is there...

  The code in the head for the "menu.php" tags is as follows:

  < head >

  " < script type =" text/javascript"src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "> < / script > .

  < link rel = "stylesheet" href = "css/960_12_col.css" type = "text/css" media = "screen" / > < / script > "

  < script type = "text/javascript" src = "js/menu.js" > < / script >

  < / head >

  The code used in the head (and some of the body) of tags in the chair.php is as follows:

  < head >

  < link type = "text/css" href = "reg/bottom.css" rel = "stylesheet" / > "

  < link type = "text/css" href = "css/960_12_col.css" rel = "stylesheet" / > "

  " < script src =" http://AJAX.googleapis.com/AJAX/libs/jQuery/1.6.4/jQuery.min.js "type =" text/javascript"> "

  < /script >

  "< script type =" text/javascript"src="reg/jquery.pikachoose.js "> < / script >

  < script language = "javascript" >

  ($(document) .ready)

  function () {}

  $("#pikame"). PikaChoose({carousel:true});)

  });

  < /script >

  < / head >

  < body >

  <? PHP include ("menu.php");? >

  etc etc.

  < / body

  < / html >

  With the inclusion, the slideshow shows just like a series of images in a list.  When I remove understand it and keep all the same code, the slideshow works as it should.

  Is there a reason why the pikachoose slideshow cannot run the menu.php SEO include is in place?

  Thank you

  Rachel

  Sorry... I got it.  I had to remove the library jQuery from the menu.php file.

• Problem reading the key to AS3

  Try this for yourself.  Place the following code in the main frame of a blank Document of AS3.

  stage.addEventListener (KeyboardEvent.KEY_DOWN, keydown);
  function keydown(e:KeyboardEvent):void {}
  If {(e.keyCode is 38)
  trace ("upward is pressed.");
  }
  }

  This code will trace "towards the top is press." in the Panel out when you press the ARROW pointing UPWARDS.

  Try pressing upward once the couples to make sure it works.

  Now, hold the SPACEBAR and the LEFT ARROW KEY at the same time.

  Try pressing square while you hold down these TWO keys, and it does not detect the ARROW BUTTON being pressed upwards.

  Also, it does not detect the ARROW BUTTON being pressed if you hold down the combination of KEY CTRL + LEFT upward.

  Someone at - it a fix for this problem?

  -Kyle

  CTRL + ENTER to run the swf file. Select it control-> disable keyboard shortcuts in the menu of the main window.

• Have reported a problem with the slide application

  When you drag the application (full-screen) high bar (File, Edit and others) disappears. This makes inconvinient hang out somewhere else.

  BEFORE:

  AFTER:

  CTRL-q is the shortcut for the file > exit

• Message from the AR - "the document could not be saved.  There was a problem reading this document. »

  I have a PC and downloaded a file from a site that I use frequently.  When I tried to save the file, I got the message, "the document could not be saved.  There was a problem reading the document. "" When I clicked on ok, a new message appeared, "" out of memory ".  My computer has plenty of available storage.

  I would be so grateful for any assistance.

  The most likely problem is that your temporary file area is full. You can make in your temp directory and empty the file manually. The other possibility is that the file is corrupted.

• read the spreadshit have thong

  Hello!!!

  I want to read my excel file (String) data. Please tell me what to use VI. Is there other data type where I cn a string in the form table? And easily recover it. Thank you.

  I have no problem reading the file with 'read of the spreadsheet.vi.

  

  So can you please explain your problem again.

  Thanks for that!

• Cannot read the videos I record on xperia ST27i

  Hello

  I recorded some videos with my Xperia phone and want to play them on my PC (Windows7 Home Premium).

  The videos play perfectly on my Xperia phone but will not play on my PC.

  I transferred via Sony PC Companion .mp4 files on my PC but cannot play them with Windows Media Player, iTunes, or Quicktime.

  POPs Windows Media Player, a message 'Windows Media Player has encountered a problem reading the file'

  iTunes search as it plays but shows just a green screen. duration of the video.

  QuickTime looks like it plays but shows just a black screen for the duration of the video.

  I also have a Camcorder HDR-AS15 snoy that works oddly so it seems that mp4 files saved by my Xperia phone are the problem.

  Any help would be much appreciated.

  Thank you

  Peter

  I think I found the problem.

  If I copied the files using Windows Explorer, they will play in Windows Media Player without any problem.

  If I copy using the Sony software (Sony PC Companion), they won't play in Windows Media Player, iTunes, Quicktime or VLC.

  Kind of defeated the purpose of the use of Sony PC Companion in my opinion.

  Peter

• Problem reading first

  When I was with the previous version of first (2014) I had a problem reading the sequence in my calendar. For some reason, ensuring that the resolutions of playback and pause were the same throughout is starting to work again.

  I recently installed first 2015. Sometimes I can reread my calendar with ease... but most of the time when I hit 'play' nothing happens.

  
  

  I read a lot of forums and tried everything what they suggest. I've updated the video card driver, I turned thumbnails on and outside, I rebooted several times, etc. - nothing works.

  If anyone has any suggestions, it would be great! I work on short deadlines and need to understand that soon!

  If it helps, here are the specs of my computer:

  • MacBook Pro (15-inch, mid-2014, retina).
  • OS X Version 10.10 Yosemite
  • Intel Core i7 2.8 GHz
  • 6 GB 1600 MHz DDR3
  • NVIDIA GeForce GT 750M 2048 MB

  Ok. Try to create a new project of CC 2015 and to import your CC 2014 project inside. Until you do this, trash the cache for your media files. If they are not beside your multimedia files, check the media Cache folder preference in Premiere Pro before. Delete the cache files with Premiere Pro closed using the operating system's File Explorer. When you create a new project and import the old inside, your cache files will be created.

  The fact that you are sometimes able to play and sometimes not suggests that it is not the hardware preferences, which have been a common problem with CC 2015 and other that we are working on the resolution. Since it is intermittent with your configuration, we will try the cache files and see what happens. Thanks for sticking with me!