Unable to connect to Mozilla. Apparently borrowed settings are wrong

I tried to remove an outdated e-mail address. I accidentally deleted the password and now I can't have everything.

If you remove the password, Thunderbird will ask you the next time that it is necessary.

Tags: Thunderbird

Similar Questions

  • Help! My settings are wrong > need to send print

    Hello

    I make the brochure for my business. I'm from South Africa.

    I use Illustrator for the brochure, layout and text.

    Last month the printer had problems to print the brochure. I discovered that my settings are wrong.

    It was the parameters:

    Color adjustment

    Settings:     Custom

    WorkingSpace

    RGB: sRGB IEC61966-2. 1

    CMYK:            U.S. Web Coated (SWOP) v2

    Color management policies:

    RGB:               Off

    CMYK:             Preserve numbers (ignore linked profiles)

    Profile incompatibilities: Ask when opening (checked)

    Ask when pasting (unchecked)

    Lack of profiles:       Ask when opening (checked)

    Then I did some research on Adobe Community Help and changed to the bottom but its bad too

    Color adjustment


    Settings:     Prepress Europe 3

    WorkingSpace

    RGB:               Adobe RGB (1998)

    CMYK:            Coated FOGRA39 (ISO 12647-2: 2004)

    Color management policies:

    RGB :              Preserve embedded profiles

    CMYK:             Preserve numbers (ignore linked profiles)

    Profile incompatibilities: Ask when opening (checked)

    Ask when pasting (ticked)

    Lack of profiles:       Ask when opening (checked)


    Can someone help me to put it right according to the printers of RSA, something like a default parameter settings.

    Last month the printer says the following:

    -fonts are not included.

    -Black is not on overprinting and is 4 color black

    I never had this problem before, so I don't know what was wrong all of a sudden.

    Now when I open my work meaningless on Illustrator or Photoshop, a small window pops up saying work does not match this settings, etc.

    Help, please. IM desperate.

    I need tomorrow to start my new portfolio

    Thanks in advance

    KAJAL PENCIL

    You should get a checklist before the flight with your print provider.  Here's what I put in Illustrator...

    You must also send the seller PDF print ready.  Not all the problems of file are limted to the color settings.  For example...

    "Last month the printer says the following:

    -fonts are not included. "

    When you save as > EPS, select "Include fonts" in the selection process; When Save as > press quality PDF, select "Embedded fonts" in the settings dialog boxes.

    "- black is not on overprinting and is 4 color black.

    In Preferences > appearance of black, select "Clear Black" screen and printing; in your file, the appropriate value elements black overprint in the color "Attributes" dialog box

    Whenever you are not sure what the printer talking about, ask them to explain what they mean and helps you solve the problems.  If they refuse, ask them where you can get help.  Most good shops will be willing to help you.

  • HP laptop: Hp 7520 all-in-one, unable to connect to web services when you are trying to scan to e-mail

    All of a sudden, I'm not able to scan to e-mail. I get the message unable to connect to Web services. One day he was working the next day this error message.
    THX!

    Hi @MMDH

    Welcome to the Forums of HP's Support. I understand that you are getting a server connection error when trying to scan to e-mail. I would like to help.

    There are two ways to go about this. It's either scanning to email app that is having the problem, or the printer it's impossible to connect to Web Services. It is easy to discover this. Tap the ePrint icon located in the upper left corner of the screen printers. If you get a server connection error, try the steps in this post troubleshooting by E - roq. Pro tips: Troubleshooting printing and scanning to Email Issues in e-all-in-one printers

    If you do not get a server connection error, then the problem is with the scanning to email app. To solve this, go to the Web Services menu (icon ePrint) and select settings, then remove Web services. You will return to the main menu/home. Press again the ePrint and enable Web Services. Once activated go to scanning to email App. Setting up scan to email. Send a test.

    I would like to know if these measures worked for you. If they did, it's great! Give us some reinforcements by pressing buttons of solution and laurels, that we will help and others see that we have the answers!

  • Why can't I receive emails in Thunderbird on my new Macbook Pro, but can send OK? All the account in Mozilla Thunderbird's settings are correct.

    I created an account in Mail, which now works, and Mozilla Thunderbird. The settings are correct, but Tbird doesn't e-mail, even if it sends OK. I run iMac, MacBook and just bought MacBook Pro OS X 10.9.2. All other computers work fine. I want to rule out all other computers and to use my new, but at this rate I can't move as I had hoped. I like Thunderbird and want to continue using it.

    I spent hours with Apple chats a whole bunch of questions and especially to fix them, but this one. I searched online conversations, support Mozilla, but have found no answer. I hope someone can help without using the technical language.

    Thanks in advance.

    Please mark this thread as "Resolved" when your issue has been resolved.

    Thank you.

  • HP Photosmart 7525 unable to connect to web services when you are trying to scan to e-mail

    Hello

    Having the same problems as everyone else.  The disconnected router and printer.  DNS manually changed to 8.8.8.8.

    Attempt at analysis of the printer.

    Thank you

    Allow to set the printer to Factory Defaults and reinstall again.  Try now.

  • U.S. regional settings are wrong when English is not the language of the phone

    Reminder: for a couple of years ago I had my phone language Italian, but because I have an app that I rely that crashes when the numbers are 1.234,67 I used locale in the United States. It worked well.  Ive spent the last 4 months in Italy and does not need this particular application, so I changed my locale to Italian as well. 2 weeks ago, I went back to the United States and rekindled my regional settings to us. However, they do not turn on.

    AS you can see here, although the settings to say "United States", the number format is European, and so the above-mentioned application crashes.

    Ive tried English, German and Italian, the language of the phone. Only when the phone is in English the US settings will work. On the other hand, have the phone in English allows me to go to Switzerland or Italian regional settings easily and makes the appropriate changes. I believe that an update that happened during the 3 months caused the problem, because as I say, it worked fine the last time I got the phone set to the Italian language with a locale in the United States in may

    is - what duplicate by someone else?

    Thank you!

    D

    You must press 'Advanced' in your screenshot.  As you can see, you probably have 'Automatic' turned 'On', which means that the language for numbers is the same as the main language.

    Put "Automatic", "Off".

  • Re: Satellite L10-90 - time settings are wrong if I start the next computer

    Hi, I have Satellite L10-90 with XP Home. The time setting is always bad for about a month. I synced the time and it seems to be fixed. But if I start the computer the next day, the time is wrong again. I found some information in Google. Some people say that the battery on board already is discharged and must be re-read by a new one.

    I don't know what could be the reason. If I need a new battery, where it is on this computer, and how to change?

    Help will be appreciated.

    Hello

    Normally if you leave the AC adapter plugged the CMOS battery will be charged. If the AC/DC adapter is connected during the night?

    If you have enabled the internet time synchronization time must always bet right.
    Check it!

    As Akuma said if the laptop is connected to a server, it is possible that the time on the server will not

  • When people send me a meeting request, all I get is an empty e-mail with no date or time etc I think that my settings are wrong?

    I have 3 or 4 different groups who send an email to a place and time of meeting, and all I get is the enamel, which his and the subject. I know that its going to be a meeting, but never the time, date or place of the meeting. Others told me they get the tabs to say yes or no to their participation in the etc, but I get nothing? What I am doing wrong? Thank you

    38.0.5's not out yet...

    If your trying to install Thunderbird Add-on menu as I said then you will not get the error from Firefox because your not not using a browser at all.

    So lets start using Thunderbird and Firefox is completely closed. If you use the browser open to see anything or download anything you do it wrong.

  • Unable to connect to a network or to the Internet on my Dell XPS1530.

    Unable to connect to a network or to the Internet on my Dell XPS1530. When I try to diagnose problem, I get a message that reads "Network Diagnostics cannot run because the Diagnostics Policy Service is not running." Having exhausted the patience all the phone with my IP and Dell, which tells me that it is a problem of Microsoft software. I have two other computers and a PS3, and I am able to connect to the Internet through one any of them. The XPS works under Vista with SP2. Can someone help, please? Thank you.

    Go to start / Control Panel / Administrative Tools / Services and go to diagnostic policy Service and set it to automatic and start it.  If it does not start, check the dependencies and make sure they're too automatic and rnning.  Then see if you can run Network Diagnostics.

    You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you should get those developed to date for the network card and regardless of the device you use to connect (such as a router wireless or such) and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows:http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

    When I'm in a lke your situation, I usually start from scratch.  Create a new network connection by ensuring that all settings are correct.  Check all the cables (if there is).  You have already reinstalled the drivers - make sure that no firmware or software is also necessary.  Configure the network sharing settings and make sure that you are ready to discover the network and such.  Check other computers to see their settings to make sure you get yours right and essentially the same thing (the same exatly so is another Vista machine connected in the same way).  Go to start / Control Panel / Internet settings and make sure that it's too fixed properly.  To connect, then try again. If this is not the case, remove some time to cool down and then start again with another new connection.  It's almost certainly a parameter that is not correcct (something no doubt very simple).

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Unable to connect via nfs, ftp only

    My network has two devices NAs - a NetGear ReadyNAS 102 (2x1To) and an OXFORD (NAs French device, 1x500GB). I'm trying to set up a weekly backup of critical files to the ReadyNAS to the GLOBAL system.

    On the OXFORD ring road, I activated CIFS, NFS and FTP. Using FTP, I am able to connect to the NAS without problems. However, I couldn't finish a single backup via FTP. The last attempt continued for 3 days and then failed. When I try to connect to the same part of the OXFORD box by using nfs, I get the error "unable to connect to the host.

    Are there steps I can perform to solve this problem?

    Thank you

    bsmerbeck wrote:

    I think that we could be closer to our cause of errors. I tried this command and received this error message:

    "showmount: failed to get address for.

    Maybe try this variant:

    showmount e 127.0.0.1

  • Manager of Multi - Hypervisor, VMWare - unable to connect to the host


    I installed a Multi-hypervisor-VMWare in a test running vCentre 5.5 environment. However, when I try to add Microsoft Hyper-V, it says "Unable to connect to Host."

    WinRM are enabled on the Hyper-V host computer. Also, I tried to manually add its IP address on the TrustedHosts in Winrm. Still no go. Can someone please provide some guidance.

    Hello

    Hyper-V R2 2012 is not supported by the hypervisor Manager Multi, so your problem with the addition of the host.

    You can refer to the Release Notes for more information.

    HTH,

  • Windows XP SP3 with view Client 5.1: unable to connect: discovers the connection connection to the server has failed

    Hi guys,.

    I need help.  I have a problem with my opinion of Client on a Windows XP SP3 computer.  When I click on connect, I get the following message immediately:

    "Failed to connect to the view connection server. Verify that the server connection mode address and network settings are correct. »

    A few details:

    My client's IP address is on the same subnet as the view connection server

    There is no firewall and DNS solves the login server see very well.  Here is the output of my customer's orders

    C:\ > nslookup X.X.X.172

    < resolves very well >

    C:\ > nslookup dd - view.viewdomain.com

    < resolves very well >

    C:\ > nslookup dd-notice

    < resolves very well >

    C:\ > tracert X.X.X.172

    < works great >

    If I open a browser on the XP workstation which is a failure, I can go to https://dd-view.viewdomain.com.  It displays the page that I need to connect with View Client. What do I think, so this should check the connectivity between the two.

    I've seen customer 5.1.0 build-704644 installed on my Windows XP SP3 client computer

    My connection to the server is running 5.1.1 build-799444 and is configured with a pool of offices 25 clone related with SSL active

    LAST IMPORTANT NOTE: I have the same version of the Client view (5.1.0 build-704644) installed on another Windows 7 workstation on the same subnet and it connects to my view connection server office pool very well.

    I tried to install the three versions of the customer view of this system of XP SP3 including the latest version, when the connection after installation, they all fail the same way. My body needs to function. The client machines can not move to something more recent to Windows XP SP3 because I am not the administrator for them.

    Any ideas?  Is this a bug or is Windows XP SP3 just not supported with view 5.1?

    VR,

    Brian Whyte

    Political of McAffee HBSS blocked 443 attempts out of the customer to view.

    The difference is that the Windows 7 machine that worked was becoming another policy HBSS applied to what was not blocking attempts.

  • Try to activate Vista's problem reports, but get the message "Windows incident reports are disabled." and some settings are managed by your system administrator

    Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."

    "Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer.  When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator."  It's personal PC at home.  I don't know how to activate it.  I already went to political group & register to adjust some settings.  But still unable to activate this.

    All settings are disabled as this.

    This problem only recently.

    Method 1

    System Restore does not work.

    Method 2

    Disable the antivirus software does not work.

    But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto").  It worked after that.  After uninstalling, I rebooted the PC system.  After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings.  I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).

  • HP 15-ac152sa laptop: wifi tab disappears from the network settings menu. Unable to connect to wifi

    I bought a new laptop. I connected to the WiFi network with no problems the first time. I have downloaded Microsoft office 2016 (home and student). The next time I turned on the laptop, the icon WiFi in the corner of the screen says "no connection available.

    On the tab "network and internet". There is no tab for WiFi. Initially, I managed to fix it by clicking on the 'network card', 'properties' and on the 'power management' tab, I unchecked the box indicating "allow the computer to turn off this device to save power. This fixed the problem... until the next time I turned on the laptop. It's the same thing and I am unable to connect to internet via WiFi.

    The single adapter in the list here is "Realtek PCI-e FE family controller #2". Still unable to connect to WiFi... Still no WiFi tab under settings "network and internet". Help, please!

    So, the problem was finally solved (fingers crossed!).

    Yes, the Internet access worked perfectly every time when it is connected through the Ethernet cable. Ultimately I phoned the helpline. They checked for the new driver updates (these have been already updated), restored the BIOS remotely and then restored the device to the factory settings. Start of the fault still took place intermittently. This indicates a hardware problem, and the unit was sent for repair.

    The idea was that when the WiFi did not work, the WiFi card wasn't physically visiable in the list of available adapters, nor has the Bluetooth adapter. Apparently in this device, the Bluetooth and WiFi functions are on the same network adapter and apparently those elements should not disappear from the list of available adapters. So the fact that they disappeared together intermittently indicated a hardware problem with the card.

    Now that I got my laptop back and I think that the WiFicard has been replaced. Hoping all is well now and I hope this post helps someone else.

    Thanks hp for fast and wonderful customer service.

    Sarah

  • After the download of 33.0, pages non-mozilla give unable to connect error, firewall exception has not helped

    Now, I get this error:
    Unable to connect

    Firefox can't establish a connection to the server www.fanfiction.net.
    Firefox can't establish a connection to the server www.gmail.com.
    Firefox can't establish a connection with the server at www.facebook.com.
    Firefox can't establish a connection to the server at www.youtube.com.

       The site could be temporarily unavailable or too busy. Try again in a few moments.
   If you are unable to load any pages, check your computer's network connection.

       If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web.

    can connect at all on pages, firefox wasn't already on my list of firewall, added to the list without change

    The announcement of chrome, which I prefer not to use if avoidable, any help or advice would be welcome.

    Make a check of malware with several malware scanning of programs on the Windows computer.
    Please scan with all programs, because each program detects a different malicious program.
    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

Maybe you are looking for