Similar Questions

• Error when you try to play audio files: Windows Media Player has encountered a problem reading the file. for further assistance, click web help

  8007007E tips

  There is also another number which is C00D11B1, but both have to do with the lock of the music in windows media player, the message said:-"Windows media player has encountered a problem reading the file; for help click web help. ""- and that of all, but when ' web help ' click on the show numbers that are 8007007E and C00D11B1 and average music, not Windows media player, y at - it someone with the same problem that has been able to solve? Thank you, let me know, if you don't mind, thank you again.

  I suggest re-download you WMP 11 from the following link and install it on top of the current installation:

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=1d224714-e238-4E45-8668-5166114010ca

  Who help me?

  If this isn't the case, please report the file type (extension) of the file you are trying to play. For instructions on how to make Windows Explorer shows the file types, see this link:

  http://www.windowsreference.com/Windows-XP/how-to-view-all-file-extensions-in-Windows-XP

• Pavilion 15-e070sl: problem with the key "cancelled."

  Hi guys,.

  I have some problems with the key "cancelled." It does not work for a few months. But the more serious problem is that sometimes when I double click on a file or a folder with my mouse compares the window cancellation asking me to confirm moving the file to the trash. This window disappears until I have restart the system. He thus annoyng. It seems that the key 'cancelled' suddenly to work again when I double click on something.

  I hope you find a solution

  With the availability!

  Hi @MichaelMazz ,

  Thank you for visiting the Forums HP's Support and welcome. I looked in your question about your HP Pavilion Notebook 15-e070sl and the keys does not properly.  Select an on-screen keyboard layout using this document , as this could be the problem.

  If this is not enough, try this document on troubleshooting the keyboard. You can watch the laptop marked key stuck section.

  Here is a link to uninstall the keyboard. Restart the computer after the uninstall, it must be reinstalled automatically.

  Have you tried to clean the key or use air to blow the key there could be debris in the key itself?

  I hope this helps.

  Thank you.

• I have a problem with the key, I aktivate Photoshop CS 6 after buying fo little years. But the drive hard ist crasht a moment the aktivate display the error. Please you can reset the key?

  I have a problem with
  the key, I have aktivate Photoshop CS 6 after buying fo little years. But the
  Drive hard ist crasht a moment the aktivate display the error. Please you can reset the
  key?

  Hi berndp3095653,

  Greetings.

  You must contact the customer as some changes to do on the backend

  Contact the customer service

  Concerning

  Rohit

• In the browser of Muse CC edition there was a problem reading the manifest file Adobe Muse CC for the site - how to fix this?

  I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.

  You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.

  If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.

• Problem reading the worksheet after you use a DLL to write on the worksheet

  Hello

  I have a few problems reading a sheet DLL created in LabVIEW. The DLL is written in C++.

  I'll dexcribe what do the VI in the screenshots:

  For DLL_INIT = the first false steps the VI (LabVIEW) values and exports in a DLL initialization.
  DLL takes these values and not some und calculation, then wrote the measured values and the new calculated values in a csv file called 'filtered_values' and a file 'filtered_values_complete '.
  so, I have two files like this after initialization:

  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;

  So now on DLL_INIT = true.
  For the calculation, the next step i read the "filtered_values" - file (LabVIEW), calculate the new values and write in filtered_values (DLL)
  And in the "filtered_values_complete" - file I will allways read the DLL entry first, so that I can check later, if the DLL has obtained the values to the right of the front step and then add the calculated values.

  For i > 0 initialization has been made:
  -the VI bed sheet "filtered_values" calculation and rotted the table 1 d in its unique values
  -The last seven values in the worksheet have been exported in the dll as well as five new measured values.
  -This DLL is still a few calculation
  - then it replaces the "filtered_values" - file and adds a new line to the 'filtered_values_complete '.

  This migth be a bit of confusion, so a small example, afer five steps it loooks like this:

  filtered_values:
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  filtered_values_complete:
  1.0000000000; 1.0000000000; 18.8991610737; -3.2940000000; 0.0060000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
   
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.9000000000; 6.5806287097; -3.2940000000; 1.0000000000; 0.0000000000; 1.0000000000; 0.0000000000;
  2.0625000000; 1.0000000000; 18.8330081064; -3.2940000000; 9.7270000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
   
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8999399568; 6.4077416273; -3.1451829134; 1.0000000100; 0.0000000000; 0.9480589053; 0.0000000000;
  3.0625000000; 1.0000000000; 18.7932988441; -3.2870000000; 9.7280000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
   
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998799074; 6.2394046705; -2.9768465052; 1.0000000200; 0.0000000000; 0.8988158138; 0.0000000000;
  4.0625000000; 1.0000000000; 19.0445703499; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;

  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8998198333; 6.0754981785; -2.8129479844; 1.0000000300; 0.0000000000; 0.8521305805; 0.0000000000;
  5.0625000000; 1.0000000000; 18.9300200447; -3.2870000000; 9.7320000000; 0.8997597592; 5.9159054233; -2.6533532901; 1.0000000400; 0.0000000000; 0.8078703403; 0.0000000000;

  So it's good enough that the VI and it works fine until some point when the just VI reads more calculation and x = sheet! There? becomes true.

  Most of the time it happens when the csv file is about 1200 lines

  Someone knows why this happens?

  Best regards

  Stefan

  Hello

  understood, that the error occurs somewhere completely else. the thread may be closed

  BR

  Stefan

• Cannot read the KEY for the installation of the recovery disc.

  My Toshiba Satellite has crashed and I have used the recovery disk provided to re - install.  It asks for the product key, but I can't read it on the underside of the computer.  How can I get the key while I am legal with this OS?

  Thank you

  Joe

  If you use the appropriate manufacturer recovery system, there is a key (key OEM_SLP) built in work and you should not need the key to the sticker.

• Windows 8 install - read the key to license OEM's BIOS - Dell XPS 8500

  Hey there,

  I tried to reinstall Windows 8 on my PC using the original key as my hard drive has stopped working. When you try to use the Dell installation media, Windows Setup asks for a product key do anything. I loaded default BIOS and tried to boot the disk of the Legacy BIOS mode as well. Any ideas?

  Thank you

  Hitik

  No MSDM tab is no product key. If the system is supposed to have one there is a problem with the motherboard (I've seen a few times, but it is very rare).

  You will need to call Technical Support Dell if the system is in warranty to have it replaced as the key is now considered to be material.

  The system will work well otherwise. If you have no guarantee that you will have to buy a new Windows license or you can install Windows 10 Technical Preview and hold out to see if you are upgraded to Windwos 10 for free or for a discount.

• How to know the version of windows of witch I have a HDD broke if I only can read the key

  I know it's a version of vista but I can't read Witch one

  I installed a new hard drive because the other was broken and now I need all the drivers for the laptop, but first of all, I must also of knowe witych version I have

  Please send an email to * address email is removed from the privacy *

  Thanks for the help people

  Hello

  Contact the manufacturer of the computer for this problem because they know the edition of Vista has been installed at the factory.

  They will ask you for the model number and the SN (serial number), etc, which normally you will find on the computer case.

  They should, if you wish, provide you with recovery disks to reinstall the appropriate operating system. They do this for a small fee.

  Or you can borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista must be installed. The product key determines which Edition is installed.

  Builders recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  See you soon.

  p.s. You get the drivers for your computer on the site from computer manufacturers. They normally have a driver and software download section to locate you, and then download these drivers.

• Problem reading the PXI-2503 channels above 23 in mode 1 wire 48 x 1 Mux on Linux

  I can't get the above relay stations 23 in mode 1 wire 48 x 1

  % nilsdev | grep 2503
  OR PXI-2503: "Dev1".

  The topology is set on "2503/1-Wire 48 x 1 Mux ' via the following API, using the 'Dev1 '.

  DAQmxSwitchSetTopologyAndReset (device, topology)

  In theory this means there are 48 relay individual that can be read, however, fails the following:

  SwitchName = "/ Dev1/ch47.

  DAQmxSwitchGetSingleRelayPos (switchName, & pos)

  The error returned is:

  DAQmx error: relay name is not valid.
  Relay name: ch47

  State code:-200202

  who is

  #define DAQmxErrorInvalidRelayName (-200202)

  I can't get the relay station for foregoing relay 23 (/ Dev1/ch23)

  Which is the expected behavior, or is there a hardware or driver problem?

  When you use this switch in "1-wire" mode, we break essentially each (+) / (-) pair in their own channels.  Since this topology uses switches bipolar, only throw which individual terminals cannot be activated independently, another switch is introduced in order to decide which side of the switch is consulted at this very moment, (+) or (-).

  Instead of having 48 simple jet unipolar or bipolar, we have 24 bipolar single jet and two-way to decide what polarity we are referencing a single pole.  You can still use this topology in mode 1 wire 48 x 1.

  To switch manually using relay DAQmx controls, you need to specify the channel switch and polarity as Maggie mentioned.  When you call ' DAQmxSwitchConnect/Dev1/ch47/Dev1/com0', the driver knows that he has to close the relay 24 ch in more 'HLSELECT' AND "1WIRE" route only positive (effectively ch.47).

  The document NOR switches help contains a more detailed explanation of the topology if you access devices > NI PXI-2501/2503 >

  1 wire 48 × 1 Multiplexer topology.

• Problem reading the buffer full

  I made a simple VI and it works pretty well. The only problem is that when I give it some commands that I can't read all of the buffer. The best example is based on the command 'instr name' the answer is supposed to be "instr name / SO2 Analyzer / monitor SO2" (with the / a new line). However, when I press the button the command execute, I get only the first part of the answer, and then when I press once again I get the second part, and so on. Is it possible to ensure that the whole of the buffer is read?

  Any help is greatly appreciated

  Look for VISA help configure a Serial Port. See the entries called "Termination character allow" and "chariot of termination? When set to true, the option enable playback VISA expires as soon as the tank of the term (default is 0xA or LF character). You will need set the option activate to forgery and just the VISA to the Serial Port bytes.

• Error: "" Windows Media Player has encountered a problem reading the file' when try to play a music video.

  Original title: "Windows has encountered a problem during playback of the message to the file.

  No one knows why, I received this message trying to read a music clip of Mediabase on my computer which already includes Windows Media Player 11 as part of the Windows Live package?

  My HP desktop computer is only 8 months old and is running IE8 and Vista.

  Thank you!

  Hey Marv,

  What is the file format of the video music?

  You can follow the steps in this link & check if the problem persists:

  Error when you try to play multimedia files: Windows Media Player has encountered a problem while playing the file. For any additional help, click Help on the Web

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Hope the helps of information.

• Problem with the key S/4 blackBerry Smartphones.

  Well, Hello community; This is my first post here.

  I have a problem with my Blackberry Curve 8520 device:

  3 days ago I typed the password incorrectly 10 times, then he appeard things like (wiping or something) and some numbers. Later, I turned on my camera; And seen all Contacts and all reset, I restarted from the beginning (adding new contacts Downloding, programs, etc.) This has worked for me for 2 days, but now... My camera is trolling as hell, (S/4) key does not work, I can not activate it with the mute button; I need to activate it with the 'Red' button, too, if I turn off the power, I can't activate it with the 'Red' button, I just pull the battery...

  (Hope you understand my problem and sorry for my English, I know; She sucks...

  Greetings, Diego)

  Hello and welcome to the community!

  You can consider a charge of BONE, that something can be a problem with your OS BB given what you describe. But first, please try safe MODE:

  • KB17877 How to start a smartphone BlackBerry in Mode safe

  It will take several attempts to get the combination of keys ESC (press/release/hold) OK, so be patient. When properly in Safe Mode, run for awhile determine if behaviour will or will not return. If it is then in safe mode, then you should proceed with reloading the OS. But if the behavior does not work in safe MODE, then well... think about what happened just before this behavior started? A new application? An update? A theme? Something else? Think carefully that the slightest change can be causal... and try to undo all that was.

  To perform a reload of the OS, here are some process, you can use:

  At the top of each forum device, there should be some 'sticky' threads dealing with the level of the OS available for many models. If they understand your model, please use those as a reference as you go along. Otherwise, you will have to dig through the download portal official for packages of OS for your model:

  • http://us.BlackBerry.com/support/downloads/download_sites.jsp

  From a PC, you can install any compatible OS package (for example, for your BB model exact number) of a BB via this procedure:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/how-to-reload-your-operating-syste...

  Note Although written to "recharge" and the storm, it can be used to upgrade, downgrade or recharge any BB device model - depends on the operating system package you download and install on your PC. If this OS package comes from one carrier other carrier for which your BB was built, then remove, on your PC, all copies of the SELLER. XML... There will be at least one and maybe 2, and they will be located in the same way or to (it changes based on your version of Windows) these files:

  • C:\Program Files (x 86) \Common Files\Research In Motion\AppLoader
  • C:\Users\(your Windows username) \AppData\Roaming\Research In Motion\BlackBerry\Loader XML

  Don't forget that you remove, since your PC, any other BB OS devices as packages with more than one installed on the PC can cause conflicts with this procedure.

  You can also study the use of BBSAK (bbsak.org) to perform the wipe what he is capable.

  You can also try this procedure might limit the specific causal element:

  1. Load your OS "bare bones"... If everything is optional, do not install it.
  2. If the behavior is immediately, then try another OS with step 1
  3. If the behavior does not immediately, then run for as long as necessary to make you to be sure that the behavior will not occur.
  4. Add one more thing - no matter how tempting, one.
  5. If the behavior does not immediately present, and then runs for long enough to be sure he won't have the same problem
  6. Repeat steps 4 and 5 until all things are responsible or the behavior presents

  When the behavior shows up, you know the culprit... the last thing you have loaded.

  If the behavior doesn't re-present, then you know that step 1 or 2 cured it.

  If the behavior has anything, then you have probably a problem of material level for which no amount of OS or software can heal.

  If you are on a MAC, you are limited to only your sanctioned carriers OS packages... but can still use any level they currently have to sanction. See this procedure:

  • KB19915 How to perform a clean reload of the smartphone BlackBerry using BlackBerry Desktop Software application software

  Good luck and let us know!

• Problems whit the key edge: some keys does not work (signs in general and the keys w, s)

  just a few keys stoped to work (clear botton, caps, shift, and ctrl botton, s and w, the numbers 2, 9, 1, 5, 7, some signs...) I'm worried about viruses. Can anyone of you give an explanation?

  Hello

  can you try to connect a few another keyboard to your computer? (maybe , maybe a defective keyboard )

  LC

• Problem with the key... Button does not

  My workflow is like this... I took three HoriZontalManager an organization theBackgroundImage the button and two HoriZontalManager to the CustomButton and I am adding the main hfm who hold the button and the background image at the top and then I added the list in a VerticalfieldManager but I don't get the button work the focus always remains in the field list. Now when I click on the update button always resides on the first line of the field list , so it always shows me the selector which is actually I set up on the first line of listfield. How can I solve this...

  Thanks in advance...

  Help, please.

  Solved the problem, I had to check that if the button has the focus, then do the work remains the Listfield has focus. So just check

  In the {navigationClick (int hour, int status)

  {if (Button.isFocus ())}

  Get the job done

  } else {}

  Field list is selected

  }

  }

  Thank you all for your concerns...