Problem recognizing face Chicony USB 2.0 Camera

Hello

I've just set up my facial recognition on my Toshiba laptop, but the room where I was in in time was dark, so I changed the web cam settings to activate the night mode.

But now when I log on to the laptop and start face recognition, that web cam settings have reset if the web cam can not see my face due to the lack of light, when I'm in some rooms in my house. I was wondering is there anyway to change the settings so that when I start my laptop night mode will be automatically on so I don't have to turn on the lights of the room, I'm in. Oh and also when I tried setting up of recognition of face without night mode several times, until registration has failed, so that's why I was forced to use the night mode.

Any help is appreciated! Thanks in advance!

Hello

What to say that it resembles the night mode can be defined as a default setting.
And in this case, you will need to ensure that the light in your room is chain enough to get the job of face recognition!

Concerning

Tags: Toshiba

Similar Questions

  • Satellite P300 - need help for a Chicony USB 2.0 camera

    Hey there I am looking for the drivers for chicony USB 2.0 camera.

    I downloaded the software called Camera Assistant Software and I also downloaded the drivers from
    HERE

    But it doesn't help out me...
    did someone helpme to contact me or send me an email [email protected]?
    I'm really very grateful to her for helping me.

    Thank you.

    Hello

    You must indicate what your problem with the camera.
    You get an error message?
    You can see a picture?

    Then please add this information.

    Welcome them

  • After installing the card 3G Chicony USB 2.0 camera disappeared

    Hello

    After I instaled my connection 'Huawei technologies' Vodafone Internet box I lost the opportunity to begin my "Chicony USB 2.0 Camera". Pilots have "disappeared."
    Even if I try to reinstall 'WEBCAM Driver' of toshiba I could not start the camera.

    Do you need help?

    Thank you

    Hello

    First of all I would like to know what cell phone you have.

    On the other hand; you talk about the internal web cam which has been provided together with for example a laptop Satellite A200?

    I found some discussion of internal issues of webcam forum.

    This thread describes a solution how to start the Chicony webcam after upgrade to Vista.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169

    and this thread describes how to start webcam software!
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24161

  • How to disable the blue light on Chicony USB 2.0 Camera?

    Hello

    My first post. I have Toshiba laptop with end of Chicony USB 2.0 Camera camera built-in, there a blue light. I put t want this blue light when I open the messenger or ICQ and talking with one my girlfriend. The blue light is turn on and I don t like it.

    How to disable, because it dazzle me
    End thank you cordially

    As far as I know the blue light can t be disabled and it will show if the webcam is used.
    If you use a Messenger you use the webcam too?

    Normally if you write only with one person in the blue Messenger is not light. On my Satellite L300, I also use ICQ, but I don't see the blue light that if I use the webcam.

  • Satellite C660-1PH - problem with Chicony USB 2.0 camera

    Hello.

    I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

    Any ideas? I looked fot the webcam settings and these are all the default ones.
    What do I have to uninstall and reinstall the drivers from scratch?
    Lia

    Hello

    * @ economid *.
    How did solve you this?

    In my case, the protective film has been mounted on the front of the cam.
    I removed it and the photo quality was much better.

  • Chicony USB 2.0 Camera disconnected?

    I have Toshiba A305 and my camera has suddenly stopped working. At first, I thought that it was the driver but I updated the driver and now it says that the device is disconnected! How to plug in a built in camera? I've seen a lot of articles that say go to Manager of devices but chicony dosnt even appear in the list. I have vista. I have really no i dea what to do. Please help me if you can. Chicony camera assistant works very well. It just says: the camera fails every time.

    Hi Joe1913,

     
    The webcam is connected to the network USB and if it has been disconnected, you must contact your manufacturer for additional assistance.

    Reference:

    http://www.Chicony.com.tw/service/FAQ/FAQ.asp

     
    You can try to create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.
     
    Now search for the question.

    Follow the link provided below to fix the damaged user profile.
    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile
     

    Thank you, and in what concerns:
    I. Suuresh Kumar - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Satellite Pro S300 - support poor driver Chicony USB 2.0 Camera

    Hello

    Driver Chicony camera isn't very good and has a bug. When you use something like Messenger Live you can not activate the 'night Mode' using the advanced settings of video that the parameter is not present in the pages of the adjustment. You can set "night" Mode on the camera Assistant software, but this has no effect when the device works on Messenger Live.

    "Night mode" is almost essential for indoor use typical Chicony camera and without it, the picture is very dark and not otherwise usable.

    If I use a Logitech camera, it is driver exposes much better settings in Messenger Live, which is equivalent to "night mode".

    It this something Toshiba can feed at Chicony and get some better drivers?

    Concerning

    Phil

    Hello

    I managed to get the night mode working in Messenger.

    (1) start Messenger and sign in to your contact and start sharing webcam as usual.
    (2) launch the support in the menu and camera software, select the first option to preview video. The preview is not displayed and a message appears on the camera stuck in use.
    3) click on the top of the key to the right icon, then select Properties.
    (4) if the night mode is checked, uncheck it and click on apply, then apply it, the webcam is now in mode night in Messenger.

    * Note *, go through image preview as the buggy driver software won't change the night Mode setting, if you go directly to the properties using the key icon in the menu from sliding.

    What would be nice if Toshiba got a better driver support and night mode was selectable in properties exposed in Messenger.

    The camera support and driver Chicony is one of the worst I've seen included in a laptop.

    Concerning

    Phil

  • Satellite A215 S4767 Chicony USB 2.0 camera does not work with Skype

    I have a Toshiba Satellite A215-S4767 with Vista Ultimate 32.
    I checked the drivers and they work, I have 10 Diretcx and it works.

    When I open the camera program, it works well.
    I put the camera program is not at initial start-up of laptop.
    I start the laptop, Skype open and figure that the camera does not work and say to check what I've done.

    Yesterday, I had installed the Skype 5.5.0.114 version and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    Hello

    > Yesterday I had installed version Skype 5.5.0.114 and the camera has functioned well, I upgraded Skype version 5.5.0.117 and the camera started not to work.

    This means that it is not software for laptop problem or a webcam, but maybe it s Skype related issue.
    You should check if the webcam has been chosen correctly in Skype video settings.

    If this does not work, uninstall the 5.5.0.117 version of the system, reboot the laptop, clean the registry using CCleaner (freeware tool) and then after reboot again to install the 5.5.0.117 again if not check the 5.5.0.114 a version that worked correctly in the past.

  • Driver for Chicony USB 2.0 cam does not work on the Satellite A200

    The integrated camera driver does not properly.

    Maybe in your case! On my Satellite A200, everything works perfectly. Now I wonder what you do and how you use your laptop?

  • Chicony usb 2.0 camera does not work when it is turned on

    During opening camera or Windows Live help software (Toshiba), the camera that is built into my laptop does not work. In Windows Live Messenger, when I try to make a video call, Windows Live Messenger stops. When I open the camera the camera assist software does not and I have no control with camera software settings.

    Hello

    I suggest you to contact the hardware vendor for assistance.

  • Chicony USB 2.0 camera does not work on Satellite P205-s6267

    Please help me!
    I bought a toshiba satellite p205-s6267
    everything works but the built-in webcam does not work, I tried many links and read many forums and have not found a solution.
    I tried to install all the drivers and it does not work
    If someone can give me a good driver or software for this, please help
    Thank you

    Hello

    give me your hand, I'll help you ;)

    Here, my friend, the link of all links that will guide you to the resolution (I hope so :))):

    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24169&MessageID=88745

    If it does then I really Don t know what...

    Welcome them

  • Chicony USB on Satellite M200 camera driver problem

    Hello.

    I have a problem and I looked the day on Google, other forums etc. My problem my webcam Chicony USB 2.0 does not work.

    It is not like the other problems where it is locked in other applications. With me I can't reinstall it. I've tried countless restarts, uninstalling the camera and restart then wait for the computer to automatically reinstall the equipment (which he tries).

    It happens constantly with this error:

    Is missing a necessary entry, the installation of the driver for this device. Maybe it's because the file INF was written for windows 95 or later.

    I have a portable Satellite M200. I try to update the drivers but it tells me that they are updated. What should I do?

    Hello

    I think you are on the external USB webcam and not the internal webcam that is included in some series of laptops.

    Thus, in the first case, you should check the webcam installation instructions.
    All manufacturers part 3 provides a device clean drivers and installation instructions.

    In my case I had to first install the driver of your webcam, and then after new reboot, I was able to connect the webcam to the USB ports.
    Then a new device has been recognized and the installation is complete.

  • Satellite U300 - 13K usb 2.0 camera Chicony driver will not install on vista 32

    My Toshiba satellite u300 - 13 k has windows vista Home premium 32-bit. I can't install * driver chicony usb 2.0 camera is not install *. I get the error "Windows has encountered a problem installing the software driver for your device." Required section was not found in the INF.* Please help...

    Hello

    Hmm never saw this error message during the installation of the webcam driver.
    Have you downloaded the package again and you uncompress it before installing?

    Please also check out webcam software other models of laptops as Satellite U400

  • Camera Chicony USB 2.0 for Win7 Home Premium 64-bit

    I have a Chicony USB 2.0 Camera and my OS is Windows 7 Home Premium 64-bit. My laptop is Toshiba Satellite T130 - 10G. I would like to tell me the site where I can download the driver for this webcam.

    Product: Chicony USB 2.0 Camera

    Category: Image

    Driver version: 6.1.7600.16543

    Driver date: 21/06/2006

    Category of equipment: USB

    Manufacturer: Microsoft

    Thank you very much.

    Hi laurocardinale,

    You can download and install the drivers for the device in the link below:http://www.chicony.com.tw/index.htm

    Also, you can follow the links below:

    Install a USB device:http://windows.microsoft.com/en-us/windows7/Install-a-USB-device

    Tips for solving common problems of driver:http://windows.microsoft.com/en-US/windows7/Tips-for-fixing-common-driver-problems

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Built in camera Chicony USB no longer works on laptop Satellite A200

    All of a sudden, the built-in in my laptop Satellite A200 Chicony USB webcam has stopped working - it was going very well about 6 weeks ago, but now it's as if he has actually disappeared from the laptop. The camera does not even on devices such as equipment manager - there is no single category of imaging devices (unless I am also connected to our printer/scanner). It is also not displayed in 'scanners and cameras' folder in the control panel. But the software (Toshiba Camera Assistant software) is still there. Weird.

    When I start the computer first, or at other times try to start the camera, an error message appears that says:
    * "webcam driver open fail. Restart the computer or the camera. "

    Before you tell me to download and reinstall the drivers, let me tell you what I "ve tried so far:"
    1 restart the computer (obviously)
    2 downloaded the driver for my model on this site and variously has tried to repair, replace and finally uninstalled and reinstalled the. IT IS NOT THE DRIVER!
    3 unplugged my wireless USB mouse and restart the computer (I read on another thread that it sometimes interferes with the camera)
    4 tried to get the computer looking for new hardware - he couldn't find it.
    5 tried a system restore, where it was linked to a recent update - I tried this using three different restore points system, and none of them could not be completed.

    Help! necessary technical assistance
    Thank you

    All that you have done is just.

    In all this history it's strange this webcam is not listed in Device Manager.
    In my opinion, you should do a final test to check the operation of the equipment, if you want to install the OS by using recovery DVDs.

    With own factory and OS preinstalled settings, you can check the operation of the equipment and see if the cam will work or not.
    If the problem will be the same I'm almost sure it's related to the faulty webcam.

Maybe you are looking for