Chicony USB on Satellite M200 camera driver problem

Similar Questions

• prolific usb-to-serial com port driver problem. I can't load the driver from propper for her. What should I do?

  prolific usb-to-serial com port driver problem. I can't load the driver appropriate for that. What should I do?

  Hello edmcski,

  This thread has been created in the Feedback forum. the Microsoft moderation team has moved this thread on the forums of hardware and drivers.

• Satellite L450-136 - installation of web cam driver problem

  Hi all

  I am trying to download web cam driver for Satellite L450-136.
  All is well until final bit, I get off cam end of message.
  Do not know how.

  Thank you

  Hello

  I'm not quite sure that what is happening with the webcam, but more often the webcam can be started using the software of the webcam installed m.

  In msconfig-> Startup tab, you can disable the webcam software to prevent automatic loading, while the laptop starts the software.

  Then you could start again the software and the webcam.
  You will see the little icon in the taskbar (lower right corner).
  Click on-> see the toolbar
  Then a webcam toolbar should appear where you could choose webcam only option.

  PS: If something went wrong with the installation of the webcam software, then uninstall the software and try again

• Peripheral Audio USB-Mulit-channel has a driver problem and PnP device problem.

  I try to use the blue ice pre - amp for recording. Under channel-Mulit-USB Audio Device, device status, it displays "this device cannot start. (Code 10) "once I start the troubleshooting process it shows that even after reinstalling the driver it still does not work and that there is a problem with the device PnP I already tried to uninstall the driver and restart my laptop to let windows try again but nothing works.  Please help D:! Thank you all very much! :]
  -Kyle

  Hello

  1. is this problem limited with a specific USB device?

  2. it worked before?

  3. using this unit for the first time on this computer?

  4. the other USB devices work properly?

  Method 1: Run the troubleshooter and see if it helps.

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  The Code 10 error applies mainly to the problems of hardware driver and devices or compatibility problems between the drivers of equipment and additional software that is installed in Windows. Therefore, we recommend that solve you these problems with emphasis on device drivers, configuration of device problems and hardware compatibility issues. You may need to update the chipset drivers and the USB controller

  Follow the given article below for more information.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  In addition, update the driver from the manufacturer's Web site and see if it helps.

  Method 3: Uninstall and reinstall the USB drivers and check if the problem persists

  1 disconnect all USB devices except the USB keyboard and mouse.

  2. click on start and type device manager in the start search box and press ENTER.
  3. Select the Device Manager and a pop-up window will Device Manager.
  4. click the + on controllers USB Bus to develop it.
  5. right click on all controllers USB and USB Root Hub that is listed, and select uninstall.
  6. restart the computer.
  7. plug in the appliance and check if it works.
   
   
   
   
  I hope this helps.

• Satellite A200-12V driver problem

  I bought a Satellite A200-12V during the Christmas sales and decided to downgrade the OS from Vista to XP SP2.
  I went during the major part of the allocation of this forum and installed XP on the machine. (after wake the mobile ICH8 driver and the bus driver from realtek on xp drive).
  I also install the driver for the graphics chip, the driver LAN and wireless trouble-free device driver at all. (Also Windows update as well).

  The only problem I am facing is whenever I try to install the chipset driver or other drivers as mass storage device drivers (I think that's going to be the TI card reader driver), touchpad, key software are supported on Fn and the Chicony Camera Assistant Software from the Toshiba driver, I always had a blue screen of death just after the restart. Even if I had a created restore point before the installation of the driver, the machine jumps to the blue screen just after the restoration of the system.

  I have flashed the BIOS to the version for XP... and I have no idea on what to do next if it executes correctly.

  I hope that someone in this forum can make me light in solving this mystery. It's a real pain after you have reinstalled XP on the same HDD during more than 20 times of testing and errors. ; p

  Hello

  For me there is no sense to install any driver if you have had no success with chipset installation. Driver chipset is the basis for other stuff for me. I installed Windows XP SP2 Pro family edition several times on different A200 and P200 successfully. The BIOS is the version of Windows XP Home edition and it is very good. Please use the Windows XP SP2 home edition installation. After the fresh install of WXP follow the instructions facilities document (if available) and please follow this order of the facilities. It is very important.

  Moreover, the number of PAxxxx who has your laptop?

• Toshiba Satellite L850 - display driver problem

  Hello
  I have a Toshiba Satellite L850-1j9, (PSKG8E-02D00KCE), in collaboration with i7-3630QM and an AMD Radeon HD M 7670.

  The problem is, I'm not able to install the AMD display driver. When I try to install the software and drivers this problem appears: https://youtu.be/AOiPq8WVz_M

  The first time that I was using Win 10. I did the update to win 10 about a month ago and everything was ok until 4 days ago. I was working with my laptop with an external screen connected by HDMI and all of a sudden the screen started to Flash some green lines with a black background (something like you can see in the video).

  I saw on the internet that some people have problems making the update to wion10, I have installed new Windows 8 to see if has something related to win10 but the problem persists.

  I tried to install the intel CPU, a graphics 4000HD Intel GPU, but may not use it as a main GPU. I had this problem: "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  I need help please to understand what I can do to solve this problem. I took a peek on the internet and so far, I found a solution that could solve my problem.

  Thanks for your help.

  Hey

  any solution?

  Does anyone know if toshiba will make an update of the bios where I can change the graphics card? AMD to Intel...

• Win 7 install disk on Satellite L40-18E driver problem

  Hi "to the point im trying to install windows 7 on a Satellite L40-18 and when I boot from the cd, he said: I have no safely remove the storage device."

  When I run Vista as usual and try to install from my computer it says that I don't have hard drives. am so confused please help :-)

  I m also confused with problem described.

  You are using the original installation disk Microsoft Win 7.
  Do you own OS installation or upgrade only?

  Please send us more information.

• Satellite 2430 DVD drive problem

  Hello
  My Satellite 2430 has had a strange DVD problem and may not know what is all about. All started when I tried to make a full recovery. The unit was not able to boot from the DVD. I checked the DVD player with different bootable disk, but still nothing. Unit won't boot from DVD drive even if you press F12 and peripheral DVD selected. Not to mention that the recovery DVDs is loaded normally in my desktop pc. Notepad starts Windows OK the HARD disk and, which is incredible, is that, inside Windows, everything is OK. The DVD player works like a dream. However, it is not enough to perform a full restore, as the recovery process cannot be initialized by Windows. A leap that the BIOS is at the origin of the problem, I've upgraded to version 1.6, but there is no change in the behavior of the DVD.
  Any thoughts, before using a big-big hammer?

  Hello

  Have you tried to change the boot priority in the BIOS?
  If this isn't the case, then first change the startup procedure to the CD player. The local network must be on the end.

• On Satellite A205-S4777 driver problems

  My Satellite A205-S4777 indicates a problem with the network adapter and mass storage controller.
  Can someone provide a link to a download driver for it?

  I tried it automatically search for software, but can't find it.

  Hi mate,

  because your machine is of the U.S.., please see the American pilots download site: http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp

  Please look for the drivers you need because you won´t find the drivers on the European sites.

  Welcome and good weekend

• On Satellite A30 audio driver problems

  I recently had to rebuild a satellite A30 with on of the restore cd I loaded all drivers from the toshiba website, all drivers works fine except the noise. Audio drivers seem to load ok and Device Manager indicates that her works very well, Volume controls are available, but grey and not usable.

  I tried to install all the variations on these drivers, but without success.

  If someone out there can help I would be really gratefull

  Hello

  If you can hear the sound if the driver has been installed correctly and it works.
  All volume controls are grayed out?
  As far as I know on some units that some audio controllers are not available.

• Driver problem with GalaxyTab 10.1 - peripheral USB MTP has a driver problem: Microsoft Virtual WiFi Miniport has a driver problem

  I just a GalaxyTab 10.1.  Connected to the computer and got the following driver problems: "USB MTP device has a driver problem" and "Microsoft Virtual WiFi Miniport has a driver problem.  What are the corrections?  My automatic updates are up to date.  is it a problem to Microsoft or GalaxyTab?

  Hi David,

  1. have you received any disk software for GalaxyTab 10.1?

  Method 1:

  You can try to start the Fixit material and check.

  Hardware devices do not work or are not detected in Windows

  Method 1:

  You can try to uninstall and reinstall the device.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the USB device and right click on it.

  c. now, select uninstall.

  d. restart the computer.

  Alternatively, you can download the drivers for your Samsung device from following link:

  http://www.Samsung.com/UK/support/detail/supportPrdDetail.do?menu=FW&prd_mdl_cd=gt-P1000CWAXEU

  2. What is the error or message code you get for Virtual WiFi Miniport in Device Manager?

  Method 1:

  Alternatively, you can try to reinstall the Virtual WiFi Miniport driver and see if it helps.

  a. click the Start button, in the start search box, type devmgmt.msc and press to enter.

  b. Select the device to Wifi Miniport Adapter, the network adapter and right click on it

  c. now, select uninstall.

  d. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Method 2:

  If you're still having problems, then try updating the chipset and network card drivers.

  For more information, you can consult the following articles:

  What to do when a device is not installed correctly

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• Attempt to connect Smart Rugby at DoubleTwist, USB device driver problem

  Original title - mobile phone android

  Try to connect my Smart Rugby to DoubleTwist. USB MTP device has a driver problem. What can I do?

  Hello

  Check with the manufacturer of phone or your support telephone company if they were provided with the phone.

  Rob - SpiritX

• Driver for Chicony USB 2.0 cam does not work on the Satellite A200

  The integrated camera driver does not properly.

  Maybe in your case! On my Satellite A200, everything works perfectly. Now I wonder what you do and how you use your laptop?

• Built in camera Chicony USB no longer works on laptop Satellite A200

  All of a sudden, the built-in in my laptop Satellite A200 Chicony USB webcam has stopped working - it was going very well about 6 weeks ago, but now it's as if he has actually disappeared from the laptop. The camera does not even on devices such as equipment manager - there is no single category of imaging devices (unless I am also connected to our printer/scanner). It is also not displayed in 'scanners and cameras' folder in the control panel. But the software (Toshiba Camera Assistant software) is still there. Weird.

  When I start the computer first, or at other times try to start the camera, an error message appears that says:
  * "webcam driver open fail. Restart the computer or the camera. "

  Before you tell me to download and reinstall the drivers, let me tell you what I "ve tried so far:"
  1 restart the computer (obviously)
  2 downloaded the driver for my model on this site and variously has tried to repair, replace and finally uninstalled and reinstalled the. IT IS NOT THE DRIVER!
  3 unplugged my wireless USB mouse and restart the computer (I read on another thread that it sometimes interferes with the camera)
  4 tried to get the computer looking for new hardware - he couldn't find it.
  5 tried a system restore, where it was linked to a recent update - I tried this using three different restore points system, and none of them could not be completed.

  Help! necessary technical assistance
  Thank you

  All that you have done is just.

  In all this history it's strange this webcam is not listed in Device Manager.
  In my opinion, you should do a final test to check the operation of the equipment, if you want to install the OS by using recovery DVDs.

  With own factory and OS preinstalled settings, you can check the operation of the equipment and see if the cam will work or not.
  If the problem will be the same I'm almost sure it's related to the faulty webcam.

• Webcam Chicony USB 2.0 on Satellite A215-S7444 - problem solved

  This is my system summary:
  Name of the operating system Microsoft Windows Vista Home Premium
  Version 6.0.6000 Build 6000
  Satellite A215 system model
  System Type X 86-based PC
  Processor AMD Turion (TM) 64 X 2 2 logical processors, 2 Lossnay, 1900 Mhz, technology Mobile TL-58
  BIOS Version/Date Phoenix Technologies LTD. 1.70, 22/02/08
  SMBIOS Version 2.4

  The solution is:

  1 - Download the latest Camera Utility for Windows Vista (v6.2.208.424, 31/08/2007; 24.48 M) for toshiba

  2 uninstall the old and install a new

  3. for sure restart after uninstall and restart after installation

  4 - Download the Chicony USB 2.0 from this link http://dlsvr01.asus.com/pub/ASUS/nb/A8E/CAMERA_Chicony_CNF6039_VISTA_070626.zip

  5 - once the download is complete, extract the files

  6 - right click computer, properties = Device Manager = ricght under imaging devices click Chicony = update driver software

  7. after the software update of the driver is loaded, click Browse my computer for driver software then let me pick from a list of... u will see the list of compatible hardware
  Click video device usb then I drive u will locate the extracted directory and you will see two model click on USB 2.0 1 3 m UVC Webcam u you will get a message install this driver is not recommended... Press Yes and wait until your driver is intalled. Restart your system

  8. the Camera Assistant Software will load but it will tell you that you need to plug the cam or reinstall landing don't be afraid press ok

  9 - the device will now work with msn, but it won't work with the Camera Wizard Software

  10 - right click computer, properties = Device Manager = ricght under imaging devices click Chicony = update driver software

  11. after the software update of the driver is loaded, click search automatically for updated driver software will load you the driver online and it will install it for you

  12 - reboot your system that will operate the Camera Assistant Software and Msn messenger works

  Great instruction thank you much!