Problem recording CS3 on new computer

Similar Questions

• How to install CS3 on new computer when old computer crashed? Always have the serial number.

  Hello, all,.

  I work for a small non-profit and we have several licenses Adobe. Most of our computers run CS6, but we have several very old computers running CS3. I used one of those old computers, until recently, when the computer gave the soul. It was nearly 10 years, no surprise. It would be extremely useful for me if I could reinstall Photoshop and InDesign on my new computer. I understand that I would need to run Java Legacy software to use CS3 and it's not a problem.

  I still have the license key for the software. To be clear, we had Adobe Creative Suite 3 Design Standard installed on the computer, kaput. It's a Mac and my new computer is a Mac. I am interested to reinstall Photoshop and InDesign. I do not have access to the original installation media - I guess it was a CD. For what it's worth, I took this job about 3 years ago, and these licenses have been purchased probably 6 years ago. My predecessor fact not held very tidy or thorough records and I have no way of knowing is it part products.

  Because the computer is fried, this mean that I am unable to disable the license key and therefore never reuse this license? Is it possible to get the installation media for Creative Suite 3 Design Standard?

  Just FYI, we buy a subscription to CC and is a great solution, but I would really like to savage this license if it is possible. I am grateful for all the advice!

  Thank you!

  kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

• Reactivation of Dreamweaver cs3 on new computer - too many activations

  I am trying to install dreamweaver cs3 on a new computer. It was not an option on the old computer to turn off because it was a volume license. I contacted support and they told me to uninstall the program from my old computer, and then I would be able to activate it on my new computer. Well, that didn't work. Then support told me that they can't help me and I need to use the forums. Any help would be appreciated. Thank you.

  The support person pushed you on this forum-car

  (1) CS3 is no longer supported.

  (2) you have Windows OS 10

  (3) CS3 is not certified to work on 10 to win.

  So even if they have to solve the problems of activation for you, there is no guarantee that CS3 will work on your operating system.

  I'm sorry, but I can't help you either.  I think you're at a fork in the road where you will need to update your software to match your operating system.

  In the meantime, you can download media - an infinitely better than CS3 code editor. And it works on Win10.

  Media - a code editor open modern source, which includes the design of web sites.

  Nancy O.

• Problems move iTunes to new computer Windows 10

  My apologies in for raising this issue again, but I searched here and all over the web and can't seem to find an answer to my question.

  My old laptop Win 7 died a few weeks ago.  My new laptop is Win 10.  Fortunately, although the old machine is kaput, I managed to remove the HARD disk and all data was still in tact and accessible.  I moved the folder the folder iTunes music on my old HDD to my music folder on my new computer.  I moved also all of my actual files of original music for the new computer; Once again, all in the same exact location.  I have also authorized the new computer in iTunes.

  However, when I run iTunes, even if all my albums appear, when I try to play a song that I get the dreaded dialog box that says: "the song _ could not be used because the original file cannot be found. You want to locate? "and even more formidable exclamation point appears next to the songs.

  I followed every piece of advice that I can find; I have uninstalled and reinstalled iTunes several times; I installed iTunes and moved the old iTunes folder in different orders. I copied tried copying the contents of the iTunes folder from my old computer into the iTunes folder on the new computer, when I recently install iTunes.  Nothing works.

  I also noticed that on my old machine, the iTunes database (file * .itl) was actually in the iTunes of parent folder, whereas, when I install iTunes from scratch, the default location for the iTunes database (file * .itl) was in the iTunes media subfolder.  I tried to set up my iTunes 'old' folder in the two formats when I copy on the new machine, but doesn't seem to make a difference.

  I know that I could go and use the option 'Search' for each album, but it is an extremely difficult task because of the large amount of music I have in iTunes.

  No matter what I do, iTunes can't find the original music files, even when I go in the Advanced preferences and redirect manually to the * file itl.  I can't help thinking that at the wrong place simply indicates the file *.til, and I don't know how to change it.

  The only things I can think of that might be the cause of the problem are:

  1. is this something from Win 7 to Win 10 (seems unlikely, because others have not reported this problem); or

  2 would it be that the drive letter and path where my music folder is on my new machine are both different from my old machine?

  On my old machine, I had a c: / partition that contains the programs and the operating system and a d: / partition for data, where my music folder.

  On the new machine the OS and data are stored on the c: / drive. It is "hid" d: / partition with data recovery.

  Also, on the old machine, my data stored in a folder of the user who was named with my first name (e.g. D:/users/FirstName/music).  But, when I created my account on the new machine to win 10 automatically named my user folder by appropriating the first 5 letters of the email address that I used, I understand is standard to win 10 (for example, C:/users/Email/music).

  These are guesses, but I'm all out of ideas.  Is it possible that someone here might be able to help me to rectify this situation?  Sorry to be so long-winded, but hope the more information, more likely it is, I'll be able to find a solution.  Thanks in advance for any guidance.

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media file under Edit > Preferences > advanced
  2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
  3. The real path to the file which you gave 2 details.

  See also make a library of portable split for some information on the standard layout for the iTunes library.

  TT2

• BlackBerry software problems sync Z10 and new computer.

  My BB Z10 has many contacts, none of them in the «Local Contacts» account This is to avoid duplicates, I only have my contacts on the BB link account that I use to synchronize with my desktop Outlook. Now, I have replaced the computer and only have contacts on my device.

  When I tried to sync with my new computer, it is what is happening. BB link creates a new account link (named after my computer) BB for synchronization. And because there is nothing in this new account and nothing on the computer, no contacts Sync. Apparently the BB link synchronize another account, only local Contacts or the account that he created the first time that you sign in with your new computer.

  I tried to put a contact on the Group of local Contacts, and then Resync. This contact was Sync and placed on the computer (Outlook) and on a new account link my device BB.

  So I thought that I could just walk-around her by placing all my contacts in my group of local Contacts. I could not find a way to 'select all' and don't feel like using the function "selection much" click on my 900 contacts.

  Is there an easy way to solve this problem? Course, the ideal solution would be to synchronize the account I choose. I'm not sure that this is a reasonable request, however. So, I would be happy with the market "copy of local Contacts.

  Thank you very much!!

  Roney

  Unfortunately, there is no way that you can select all contacts with just a tap. You should choose the option "Select more" and to highlight the contacts one by one.

  Also he by design this Blackberry link will only synchronize the device data associated with the link BB for this computer account.

  That means, 1 BB PC link data on the device will not sync with 2 PCs.

• How to enable recording to a new computer after the old has crashed

  I have Adobe Creative Suite CS5.  It's on my Mac laptop for about 3 years.  This computer had the flaw of logic board and was replaced by Apple with a newer computer.  I need to change this computer to this new recording. How can I do this?

  Please follow the steps below.

  1. Disable the software from the old computer. For more information consult Learn how to enable or disable Adobe apps.
  2. Install the software in the new computer.
  • If it is creative cloud consult, download and install Adobe Creative Cloud applications
  • If it's any other product please see other downloads

  Hope this will help you.

  Kind regards

  Hervé Khare

• problem activation FM on new computer

  Recently, I had to buy a new computer. Previously, I had FM installed on two PC - one using Windows Vista operating system and the other using the Windows 7 operating system. The computer Vista problems and had to be reformatted the hard drive. FM has been erased from the computer at this time. I installed FM on my new computer, but get a message that I have reached the maximum number of activations and that if I don't turn it off on one of my other computers, it will stop working within 30 days. Help files say that Adobe detects when a problem like this happens and an application no longer works on a particular computer, but he has not seen it - perhaps because I couldn't get online after the crash. Who could speak, or what I can do to disable the copy located on the dead computer? Thank you.

  You must contact Adobe Support by chat or phone when you have the serial number and activation problems.

  Here is a link to a page with options to help make contact:

  http://www.Adobe.com/support/download-install/supportinfo/

• install cs3 on new computer

  I disabled cs3 from old computer. Cannot be enabled on the new computer. How can I do

  Hello

  This included resolving your concern

  http://helpx.Adobe.com/Creative-Suite/KB/error-Installer-database-corrupt-install-1.html

  Hope It helps

  Thank you

• InDesign cs3 on new computer

  I purchased InDesign CS3 in April 2007 and downloaded on my computer. I've been using prog. Since that time - no problems.

  Finally, the machine is dead (as they do), and I need the prog. on a new machine.

  How can I do this?

  The original e-mail address gave me does not work anymore and there seems not to be phone numbers to call - help!

  You can install and activate the perpetual software (purchased) two computers of the same type (mac or pc), as long as you use it on one at a time. (lightroom is the exception because it is a product of multi platform, so it can be installed on the pc and mac platforms)

  It is advisable to disable the software on a computer on which it will be is most used, especially before giving away or selling the computer or reformat the hard disk. Please see this link: How to disable the software.  This frees an activation if you have the option to install the software on another computer at any time.

  If you do not have access to your old computer because you have replaced a hard drive, upgrade your operating system to format your computer before turning off your software, j or dies, you can ask Adobe Support for help you disable from a machine, that you can not access the computer. Have your serial number or Adobe ID ready, then contact us.

  To load the software on another computer, download and install it as you did on the first computer. Then enter your serial number to activate it. Products CS3 download

  Guinot

• How to transfer music from a computer to a new computer using windows media player?

  Windows Media Player

  Hello TMorrison,

  Thank you for your message.  There are two ways that this is possible, however, there is no way to transfer music using Media Player.  You can listen to the songs on another computer through another computer but no transfer.  In order to transfer music you perform one of the three methods suggested below:
  1. use an external drive to copy music to a computer that can be postponed and copied to the other computer.
  2. transfer music on the network, is if you have a workgroup configuration.  If this is not the case, let know us and we will help you with that as well.
  3 record your music CD or DVD and transport records to your new computer and copy.
  Please let us know if it did or did not help to solve your problem.  We can't wait to hear back on your part.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• New computer Windows 7 and the Wii

  Well, I really have no where else to turn, so I thought I might as well try these forums.

  Basically, my problem is that my new computer Windows 7 Home (I just bought 1 week ago), may not share the router with Wii my brother. This is the router card, as well as my problem:

  Linksys BEFSR41 V4, 4 port wired router-last update

  ISP is Comcast

  Configured for the port before the Wii, using the - Ports 1-65535, both TCP and UDP and assigned a static IP address 192.168.1.111 (which was at the recommendation of Nintendo on the phone)

  Wii has been assigned a static IP (as mentioned above) as it was my computer.

  Wii has the correct entries in the router DNS server

  Wii is configured to use the wired connection

  My computer is a Dell Studio XPS 8000

  Here's my IPconfig/all

  Microsoft Windows [Version 6.1.7600]
  Copyright (c) 2009 Microsoft Corporation.  All rights reserved.

  C:\Users\Mokey>ipconfig/all

  Windows IP configuration

  Name of the host...: Mokey-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. :
  ... Description: Broadcom NetLink (TM) gigabit Ethernet
  Physical address.... : 00-25-64-E8-CE-10
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::45d:fd19:80fe:3 b 74% 14 (Preferred)
  IPv4 address: 192.168.1.150 (Preferred)
  ... Subnet mask: 255.255.255.0.
  ... Default gateway. : 192.168.1.1.
  DHCPv6 IOOKING...: 251667812
  DHCPv6 DUID customer...: 00-01-00-01-12-B1-5C-31-00-25-64-E8-CE-10

  DNS servers...: 192.168.1.1.
  NetBIOS over TCP/IP...: enabled

  Card tunnel Local Area Connection * 12:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. {677AB390-DC0F-4548-8F15-A546757783EC}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  My static IP PC specs:

  Internet Version 4 Protocol

  IP address: 192.168.1.150

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  Alternate DNS server: white

  We have 2 computers and a Wii connected to the router, everything has a static Ip address. If Wii Port Forwarding is disabled, both, we can go online, no problem what - if - ever, everything is wonderful and quick. If the Wii is enabled on the router, my brother PC and Wii can apply online, but my PC can't. It has never happened before with my old XP sp3 computer (HP Pavilion, record quite high for the time, 9 years old, worked as a beauty ), but for some reason my other cannot share the line with the Wii. Just mine, no less . I don't know what could be the cause of the problem. I did research all this information when we first have his Wii, so everything was peachy until this new computer.

  Please, any help is very appreciated, I traveled more than 4 hours time to mobile phone, only to get the evasive of Comcast and Dell.

  Your TM602G is a cable modem which should work fine when your BEFSR41 resetting to the factory default values.  Note that your modem has a battery in it.  The battery must be removed, for a minute, each time that install you the modem with a new router, or connect a computer directly to it.  I suspect that is the reason why you couldn't get an Internet connection with the last configuration that we tried.  Also, do not connect anything to the TM602G USB port.

  For the time being, until all computers are running, please unplug the Wii.

  For now, please set both your computers in order to "Obtain an IP address automatically" and "obtain a DNS server address automatically".  Restart the computer and make sure it is always set up this way.

  I think it will be better to start with a "clean slate" to set up your network, the next step will be to reset your factory default BEFSR41.

  To reset your router by default, follow these steps:

  (1) turn off all computers, the router and the modem and disconnect from the wall.
  (2) disconnect all the wires of the router.
  (3) turn on the router and let it start up completely (1-2 minutes).
  (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
  (5) turn the router.
  (6) to connect to a computer (if possible, use a computer Win XP or Vista) cable to port 1 of the router (NOT to the internet port).
  (7) turn on the router and let it start up completely (1-2 minutes).
  (8) the power of the computer (if the computer has a wireless card, make sure it's off).
  (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
  (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Let the empty user name (Note: some Linksys routers have a username "admin") and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

  If you get this far without problems, put your entire network.  Then, using an ethernet cable, connect the ethernet on the TM602G port to port Internet (WAN) of the BEFSR41.  Leave your computer connected to the LAN of the BEFSR41 port.   Remove the battery from your TM602G and wait a minute.  Replace the battery in the TM602G.  Turn on your TM602G and let it start up completely (1-3 minutes).  Turn on your BEFSR41 and let it start up completely (1-2 minutes).  Turn on your computer.  Now, try to connect to the Internet.  If you have trouble, temporarily disable your firewall software computer and try again.  If you get a computer to get an Internet connection is working properly, then (using an ethernet cable) connect your second computer to the BEFSR41 and try to get an Internet connection active.    STOP HERE and the report with your results, including the results of step 9 and 10, and whether or not, both of your computers working Internet connections become.

  If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

  If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

• Former computer stolen / / now new computer won't sync music on itunes

  Hello

  I had my old laptop stolen and replaced by a brand new Macbook Pro.  My problem is that the new computer will not allow a new music put on my iphone because it is synchronized and authorized with the old machine, now gone.

  I have a time machine backup a few weeks ago, but who was unable to migrate on my new computer because the new machine has a smaller SSD drive.  So I just pulled the files manually.

  Is there an itunes file somewhere in my old library that has the piece of code that it is my iphone to my new machine and copy music on there?

  Community thanks a lot!

  PW

  If possible, copy the entire iTunes folder to the same location on your new hard drive.  If there is not enough space then omit some media from the Media folder.  It's actually the iTunes Library.itl file that needs your phone but it's more than just the file key for your phone, is the key for everything in iTunes file and he collaborates with a bunch of other files and folders in the iTunes folder. If you omit some of the multimedia files they will appear as broken links, but you need to set your library anyway if you want to use a smaller hard drive.

• Can I install XP from a computer die on "newer" computer

  I recently got a new laptop at work.  My home computer died a year before, so I need a new.  The computer dead was built by the wife of a former colleague, and I have no more contact with one of them.

  My employer will let me buy my old lap top, at a pretty good price. Since I'm totally cheep, I plan to use it and re-install my drivers of keyboard and speaker, etc., on the top of the tower.  However, my employer has to whipe all of the machine, including the operating system.  I have the installation disc and the key to the XP that were installed on the dead computer.  One of our specialists thought that I would be able to install XP from this drive on the old lap top.  I anticipate that this will be a problem because they key has been used before on the dead computer.  Is there a way to get the key reset since I no longer use this license on the dead computer?  I have to stall with XP because some of the working software I need to use the House is not compatible with Windows 7 (and thus the problem with buying a new computer... I have XP for my OS for the working software must be installed).

  If the XP CD that was used on the old computer was a retail copy, you can use it on the new laptop. You must use the product key that is on the orange sticker on the CD retail case in this matter. You will not have a problem with activation.

  If the XP CD that was used on the old computer was an OEM (HP, Dell, etc.), you can't use it on the laptop. You will need to purchase a full copy of XP to use on the laptop. The product key on the laptop will belong to your employer volume license and cannot be used.

  As you must have XP, you must use a copy retail to install. Be sure to install all the drivers and the specific portable software later. You can find them in the computer Web site portable mftr... MS - MVP - Elephant Boy computers - don't panic!

• Why can't I watch my WTV files to new computer?

  I have a XPS 8300 computer from desktop with Windows 7 I tape TV shows. I just bought a laptop Inspriron M731R with Windows 8.1 and WTV files will not work on this computer. I have audio but no video with Windows Media Center.

  Why can't I watch my recorded on this new computer?

  Hello

  According to this article from Microsoft , you will have to pay for an add-on in point 8.1 of Windows to see the TV files on your systems.

  f that your PC is running Windows Pro 8.1 and you wish to watch and record TV with Windows Media Center, you can get Windows Media Center Pack 8.1 for $9.99 USDERP. To buy the 8.1 Windows Media Center Pack, follow the instructions on this page.

  You can look in some of the applications of free like VLC video playback if you don't buy the Add-ons.   If you don't want to buy the updated the above link will explain how to get it.

  Todd

• Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get o

  Hi, I need to activate my Adobe CS3 on a new computer because my old is dead and I'm having trouble. Tried the average normal recording then connected with my Adobe ID and can see the software code and activation already registered. How to get it on my computer saved?

  If your two activation is used, you need to call Adobe. Install CS3 point of activation and call Adobe at this time here.  They help in cases like your My drive crashed and I replaced it. Could not disable the activation of the accident.  I've done that twice in the years I use PS for about 20 years

  To see your key, you must click on the product in your products and services Adobe page.