Problem sending the document to the printer. I have to swith on the printer or is it automatic?

Similar Questions

• Problem: Acrobat DC: Windows Explorer: right-click right/convert to...: "..." problem sending the command... »

  Is anyone having problems using Windows Explorer to 2015 of TCS in the process of a PDF file?

  I use TC 2015 on a box of Win 7 64 bit with 32 GB of RAM.

  My workflow includes the use of shortcuts in Windows Explorer to create the FM files from PDF files / or "Convert to Adobe PDF" or "convert to Adobe PDF and send".

  Use either of these commands in Windows Explorer results in the error "There was a problem sends the command to the program", "program" being apparently two FrameMaker 2015 and/or DC Acrobat (or Adobe PDF/Adobe Acrobat Distiller DC).

  FrameMaker begins as it should, and the file is loaded as it should, but apparently when FM called Acrobat, it cannot start as it should.

  I am a week off for a critical period of an internal workflow document discussing this exact feature.

  If anyone knows the answer, it would be of GREAT interest to me...

  Thank you!

  (Related screenshot below...)

  

  I have confirmed (by test test facilities) that this feature is broken. I will record a bug this morning.

• Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.

  If a shortcut is used while Firefox is already open the error will not occur.

  For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.

  Hope this helps.

  Olivier

• Using Autodesk Architecture 3.3 and opening a working file, I get the error message error "there was a problem sending the command to the program".

  When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a drawing file is suspended the program autodesk. These two worked before.

  Hello

  The question you posted would be better suited to the Forums from Autodesk. I suggest you post here for better support.

  Here is a link:

  http://forums.Autodesk.com/

• Error message Windows Live Mail to write links - "there was a problem sending the command to the program".

  I get an error message when I click on a link in Windows Live Mail.  A pop up, said "there was a problem sending the command to the program".

  Post Windows Live questions in the appropriate forum found here:
  http://windowslivehelp.com/

• There was a problem sending the command to the program - excel windows 7 that no shortcut will open - open, if I click Open in the file menu

  There was a problem sending the command to the program - excel windows 7 no shortcut will open - will be opened only if I click Open in the file menu

  See if the answer of "CardSolve" helps.

  There was a problem sending the command to the program by double clicking on a file. :
  http://social.answers.Microsoft.com/forums/en-us/w7programs/thread/8c870808-A108-47cf-8464-9f84427b624a

  Ramesh Srinivasan . The Winhelponline Blog
  Microsoft MVP, Windows desktop experience

• Error Msg: "there was a problem sending the command to the program" when you use a shortcut for FireFox

  This only happens when I use a shortcut to call Firefox. I am running Windows 7 Professional. The Firefox window opens after the error message occurs, so I would class this as a gene.
  Many help comments mention 'ddeexec' removal of Firefox registry entries. It worked for a while (it seems to be related to updates of Firefox), but now no longer works: ddeexec is removed, but the error message persists.

  I found a fix for Win 7 (x 64) based on two observations:

  1. the waiting period does not exist if Firefox is already running.

  2. There are (at least) two types of shortcuts: Application and URL. When Firefox is the default browser, shortened URL get a timeout message. A the application shortcut to Firefox works without any problem.

  Follow these three steps to create a new shortcut that runs Firefox with the URL as a command:

  1. create a shortcut to the Application either by copying an existing shortcut, or right-click on the desktop, select new | Contextual and choose the location of Firefox.exe.

  2. then right click to open the new shortcut, properties. On the shortcut tab, you will find:

  Target: "C:\Program Files (x 86) \Mozilla Firefox\Firefox.exe.

  Start in: "C:\Program Files (x 86) \Mozilla Firefox".

  3. copy the URL address, type a space after the quotation marks of the target and paste that URL, it should look like this:

  Target: "C:\Program Files (x 86) \Mozilla ' http://postini.com

  I used a short URL to this example to fit on a single line, but the useful commands can be much longer; for example:

  https://login.Postini.com/exec/[email protected]

  The second example opens a connection to Postini spam filter window and between your email for you. Below is a screenshot of a tab popup properties shows in the middle of the target where Firefox ends the line, and the URL starts.

  -Jim

• problems sending the form PDF

  Hello

  I had a problem:

  Trying ad an email button in a form using live cycle 4 on windows.

  It works al fine presentation XML, but won't work for PDF.

  I used all variants (common button, email button, add java script behind the button) it works with XML, but not with the PDF...

  Annyone can help?

  Use Acrobat:

  Attach copy of your form filled in an e-mail to first add the form usage rights.

  You can add these rights with Acrobat XI under file > save as other > Reader Extended PDF > activate tools more.

  or

  You can add these rights with Acrobat X (mac) under file > save as other > Reader Extended PDF > additional features allow

• Updated Firefox to update last night and now when I click on an external link, I get a message saying: "there was a problem sending the command to the program".

  I tried to open a link to an email account POP3 out of an e-mail program so that other site links sent to me through an e-mail program. I get the same message every time.

  Also the links sent me in Thunderbird does not open in a browser window.

  Clear the Cache and Cookies

  • https://support.Mozilla.com/en-us/KB/template:clearCookiesCache

  Clear the Cache of the network

  • https://support.Mozilla.com/en-us/KB/how%20To%20clear%20The%20Cache#w_clear-the-cache

  Check and tell if its working.

• There was a problem sending the command to the program?

  This message appears when I try to open a Web site. It takes several attempts to open a website, whether it's FB, Hotmail or other. It started when I upgraded to Firefox 9.0.1 and continues after 10 of Firefox.

  Try:

  • http://KB.mozillazine.org/Windows_error_opening_Internet_shortcut_or_local_HTML_file_-_Firefox

• How to send the report of Oracle ACEs automatically by email

  Dear gurus,

  I would like to automatically generate an Oracle report and send an email. for this so I try using below command

  Server = C:\home\BIN\rwclient rep_servername_FRHome report=C:\reportpath\report.rdf userid=username/password@aliasname desformat = pdf destype = mail [email protected] Parameter1 parameter2 = parameter3 = parameter4 xxxx xxxxxx xxxxx = = xxxx

  But I am getting below error.

  REP-0177: error when running in the remote server

  Executed successfully, but there were a few errors when distributing the output.

  But if I tried to generate the output as a file on the local machine work very well and below comand generates report on the local desktop

  Server C:\home\BIN\rwclient = rep_servername_FRHome report=C:\reportpath\report.rdf userid=username/password@aliasname desformat = pdf DESTYPE = file DESNAME=C:\report\reportname.pdf Parameter1 parameter2 = parameter3 = parameter4 xxxx xxxxxx xxxxx = = xxxx

  My only problem is to use rwclient I cannot send emails

  Please help me on this.

  Kind regards

  Satish Kumar Sadhu

  Dear friends,

  I solved the problem by putting my server smtp on servicename.conf

• Since my 10.0.2 upgrade on my iPhone 5 my Wifi doesn't connect anywhere except home! This has never been a problem in the past I have connected everywhere wherever I was going to automatically! Is - this rare?

  Since my upgrade to 10.0.2 on my iPhone 5 my phone only connects to Wifi when I'm at home (cancelling the purpose of a MOBILE phone). This was never a problem in the past a my phone automatically and I received and could send emails, messages and use messenger etc automatically. Is - this rare?

  Hi John,.

  Please visit Apple support communities.

  I see that your iPhone 5 is not connect to other Wi - Fi networks after update to iOS 10. We offer troubleshooting tips.

  Since your wireless network is working, but you cannot connect to other networks, start with the next step in If your iPhone, iPad or iPod touch connects to a Wi-Fi network:
  
  

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  Sincerely.

• Someone had problems with the shutter speed on the Canon 70 d?

  I've used a Canon 60 d which was brilliant! My husband bought me a 70 d at Christmas as a surprise. However, I have problems with the shutter speed. In automatic mode, everything is fine but on manual, Av, Tv etc I seem to be unable to change the shutter speed of a very slow release. I want to know if the unit is defective somehow, or if there is something I should be doing that I'm not. Please can someone advise/inform me what I can do wrong or if it's something I should take with Canon?

  First of all, you need to reset your 70 d to the factory settings. Check your manual for more information on how to do it.

  You can't troubleshoot anything until you are zero squared.

• the computer is configured to automatically run programs at startup detected

  I have windows 7... computer running very slow when I start the pc, or even to open internet programs... don't have a full scan virus no nothing...

  When I check the performance he said: convenience store has made some changes to your system.try to try the task you were trying to

  do before.

  and she said then in a pox: problems

  the computer is configured to automatically start detectet and a yellow triangle with an exclamation point

  could you please tell me how solve the problem... thank you so much manual

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  Optimize Windows 7 for better performance
  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Open the troubleshooter of Peformance
  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Annoying Pop - Up When you send the document to the printer

  Whenever I have send a document to the printer, I get a pop up telling me that the document has been sent to the printer.  This feature can be disabled?

  Give it a try and see if it helps.

  http://www.windowsitpro.com/article/configuration/how-can-i-disable-the-printer-popup-message-

  I hope this helps.

  Check out this link: 404 error: Page not found

  I think that something in your post (because the text is correct for the link, the hyperlink itself, it is what is broken) dropped the "-" at the end.

  This link (<-- click="" there)="" i="" believe="" is="" what="" you="" were="" going="">

  Well, a little dated, who knows?  Might work.