Problem: Some devices are detected, some are NOT detected.
Dear Sirs,
We are NEITHER-FBUS Configurator Ver 3.2.1 with PCMCIA-FBUS.
There are three field devices on the segment, i.e. Rosemount 644, Rosemount 3051 and Fisher DVC6200f.
Power goes to the segment of services through the hub and power conditioner.
The LCD screens for issuers of Rosemount show information correctly as below.
However, NEITHER-FBUS Configurator show only Fisher DVC6200f and their blocks.
These two transmitters of rosemount are missing!
I appreciated if someone is able to advise the solutions!
Hi aarontseng,
Please refer to the Manual of Configurator - Appendix B Troubleshooting and frequently asked Questions.
Page 109 has lots of suggestions on issues as "a device does not appear in the tree of configuration.", "the device does not appear in the NOR-FBUS Configurator", etc.
Please first see if those who might work for you.
FYI, the latest version of NOR-FBUS is 14.0. You can switch to it free if you have a valid license for the older versions.
http://www.NI.com/download/NI-FBUS-Configurator-14.0/4943/en/
Tags: NI Products
Similar Questions
-
some of my bluetooth devices are not installed to the lack of drivers?
some of my bluetooth devices are not installed to the shortage of pilots.
Operating system: Windows Vista SP2 with the latest windows updates installed.
Please guide...
Best regards, Manu Mali
Hello Manu,
Thank you for your message.
Looks like you'll want to go to the Nokia site to see on some updated drivers.
I recommend that you check the "manually update drivers" section of this article:
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
movie maker error: a video capture devices are not detected
Filmmaker gives the following statement. A video capture devices are not detected. My camera is plugged in and turned on. This has not happened before.
What is it?
How is it connected?
Filmmaker works with mini camcorders dv connected FireWire, the firewire driver is installed by microsoft, you should not need to reinstall it, apart from a few special cases.
This device and cable worked before?
If so, what was the alst time and have you made any changes to the computer since then?
-
This disc is should downloads to fix the drivers for this device are not installed. (Code 28) There is no driver selected for the device information set or element.my pc works on windows 8.1 pro 64 bit model whose id is 15-e017AU.
Hello:
I have attached the driver you need below in attachments.
Go to Device Manager and click on the device that need pilots. Click the driver tab. Click on set to update driver.
Select her browse my computer for driver software option and navigate to the driver folder that you unzipped.
Make sure that the include subfolders is selected and the driver should install. Then restart.
-
I ran a windows update and a hardware update for ALL-IN-WONDER RADEON 7500 was available. I wasn't sure what it was, but I did research some information about drvier... or windows hardware and device driver has informed me that it detects what device(certain hardware) I have on my computer to install the update. (I don't know if it's true) anyway, since then, when I start my computer, the 'new hardware found' window. After investigating on I found it cause the ALL-IN-WONDER RADEON 7500 (I don't think I know what it is). There was my this info in my device (6 times) Manager: its an unknown device located in the ALL - IN - WONDER RADEON 7500 and it states that "the drivers for this device are not installed. (Code 28) "what is it and how to fix it." I don't know if I'm to disable or uninstall. As I said, these updates I got Windows update manager and I'm guessing that it was not successful.
That is, what it does and how can I solve this problem?
Thanks in advance
Try to go to this link which is AMD and download the drivers for it.
The question to be a tunner TV that you have installed in your computer that is missing the drivers at startup. You receive the error because when your computer starts, it loads this device to make it ready for use, when you want.
Good luck! Please rate me upward if you find my post helpful. Thank you!
-
I HAV these two errors in my drivers and windows cannot update, can any body healp me?
Hello
What devices are - if you can not tell what is the name, then you can specify the category of
Device Manager - or both?--------------------------------------------------------------------------------------------------------------------
This device is not present, is not working properly or is not all its drivers installed. (Code 24)
The device doesn't seem to be present. The problem may be a faulty hardware or a new driver might be needed.
Devices to stay in this State if they have been prepared for removal. After you remove the device, this error disappears.
On theGeneral properties of the device tab, clicktroubleshoot to start the Troubleshooting Wizard.
---------------------------------------------------------------------------------------------------------------------
The drivers for this device are not installed. (Code 28)To install the drivers for this device, clickset to update driver, which starts the Hardware Update Wizard.
==================================================================
Those who might be ghosts then right click on them and UNINSTALL - devices and then RESTART.
References to Vista also apply to Windows 7.
If they show upward then try to manually install the drivers.This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers to 7 (update drivers manually using the methods above is preferred
to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I connect and transfer content from my computer to my Kindle all the time, but today when I plugged the Kindle my pc tells me that the device needed troubleshooting. After you run the troubleshooter, I gives me this message:
"The drivers for this device are not installed. (Code 28)
There is no driver selected for the item or a set of device information.
To find a driver for this device, click Update driver. »
This has never happened before, and, no, I have not recently downloaded new applications, programs, updates or had a system crash. It was, as usual, a few things. Where it says "to find a driver for this device, click Update driver" which is non-interactive. I can see it, but you can't click on it. That's happened? What should I do?
Scott.
Hello Scott,
Thanks for posting your question on the Microsoft community.
We need more information about the issue so that we can help you better.
What is the brand and model of your computer?
Thank you for details on the question and your efforts to resolve.
This problem can occur because the parameters or corrupt device drivers.
I suggest you run this Microsoft fixit and check if it helps.
Reference:
Hardware devices do not work or are not detected in Windows
https://support.Microsoft.com/en-us/mats/hardware_device_problemsAutomatically, he diagnoses and fixes problems with the hardware. (USB) Keyboard and mouse are not detected by the Manager of devices or when they do not work.
Please also try to update the device drivers by using the steps described in this article and check.
Reference:
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows/Update-driver-hardware-ISNI hope this information helps.
Please let us know if you need more help.
Thank you
-
Original title: driver for Windows game controller problem
My Logitch wireless gamepad F710 does not work laptop with my HP Pavilion dv6-6017tx PC Xinput mode (Windows 7 Home Premium 64-bit). But it works very well in mode Dinput. When I have this device in windows in Xinput mode displays an error in the window of the driver in detail which 'the drivers for this device are not installed (Code 28)'. I uninstalled and reinstalled the driver of Logitech software, but the problem is still there.
I tested this device to a desktop PC (Windows 7 Professional 32-bit), but this PC detects F710 controller using Xinput, working absolutely as planned without any installed driver software, provided by Logitech. In the details of driver in the PC window, it shows that his taking the pilot as "XBOX 360 Controller for Windows" and the driver file is xnacc.sys in system32 folder and when I searched my system32 laptop dv6 folder I found this file is missing and I n, t know why.I also tried to control windows search for drivers online, but windows has failed to find it.So what should I do now?Help, please!Thank you very much for the reply.
I thought about it finally.I installed the driver for the controller XBOX 360 for Windows on microsoft's site and installed. Then plugged the device and select the driver manually installation option and wanted Xbox 360 controller for windows driver in the list. Now my controller F710 currently also works well in mode Xinput and Dinput.Thank you very much. -
Hello
I get this error:
The drivers for this device are not installed. (Code 28)
model: HP 250 G2 Notebook PC
Model number: F0Z43EA #ABT
PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C & REV_01
PCI\VEN_10EC & DEV_5229 & SUBSYS_218F103C
PCI\VEN_10EC & DEV_5229 & CC_FF0000
PCI\VEN_10EC & DEV_5229 & CC_FF00How I solve the problem?
thnx
Hello:
You need this driver for the card reader:
Download and install the driver first on the list from the link below.
-
Error code 28: the drivers for this device are not installed for Ethernet controller
Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)
I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.
Hi jhawkerchic,
1. What is the number of brand and model of your computer?
To resolve this problem, you must install the latest version of the drivers for the device.
You can check the manufacturer's website and download and install the latest version of the drivers available for the device.
You can see the following article for more information about the error Code 28:
Explanation of error codes generated by Device Manager in Windows XP Professional
http://support.Microsoft.com/kb/310123
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Printer : Officejet Pro 8600 Premium. model CN577A
OS : Microsoft Windows 7 Home
Base-64How your product is connected to your PC? : Network
Description of the problem : in the Device Manager I have an error message with the
OfficeJet pro 8600 icon - "the drivers for this device are not installed.
(Code 28)
There is no driver selected for the item or a set of device information. "I have
have uninstalled and reinstalled the driver without result. The printer
seems to work fine.
Hello
Yes, I would also suggest a new re-installation of the software.
-
Windows Update driver Fresco Logic USB Hub rot caused the pilot to read device status: the drivers for this device are not installed. (Code 28). The Roll Back button is not active. Where can I get the previous driver that came with my system. ASUS N53S Windows 7. Thank you very much.
Hello
Thanks for posting in the Microsoft Community.
I understand your annoyance that you cannot update the driver hub USB rot. Please follow the steps below to help you to solve the problem.
I would like to inform you that a Code 28 error is caused by a driver missing for that piece of hardware.
There are all sorts of reasons that a driver could not be installed for a device, but your troubleshooting the problem will be the same regardless of the root cause.
- Remove or reconfigure newly installed unit.
- Restore the version before your driver update.
- Use system restore to undo recent changes in Device Manager.
Step 1: Roll back the driver to the version before your update.
If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. If you are having problems with your computer or device after upgrading sound driver, you can restore to an earlier device driver. Check out the link below to make back the driver:
http://Windows.Microsoft.com/en-in/Windows/restore-driver-previous-version#1TC=Windows-7
When Windows 7 starts up again, it will load with the device driver of this material that you had previously installed.
I suggest you to uninstall the driver from hub to rot Fresco Logic USB Device Manager and install the most recent on the manufacturer's Web site.
Tips for solving common driver problems:
http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-driver-problems
Hope this information is useful. Feel free to get back to us for further questions or problems related to the Windows operating system.
Thank you.
-
Original title: Windows7 does not recognise seagate expansion drive.
Expansion drive model: ST905004EXA101 - RK Seagate 500 GB
Microsoft Windows 7 website says that it is supported.
The drive works in another laptop with Windows XP.
Try installing in another laptop with Windows 7 Enterprise SP1.
In Device Manager, I get a message "the drivers for this device are not installed. (Code 28) »
Hi PinakiDeb,
You can follow this link & check if the problem persists.
http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201235&NewLang=en.------
Hope the helps of information.
Please post back and we do know. -
Original title: Safe Mode
Can run my computer only in Safe Mode, whenever I try to boot into normal mode I get a screen with lines on the subject. Cannot download even the peak "white screen" now.
Any help will be greatly appreciated. Thank you.
New: I get his message when trying to activate the controller PCI of communication Simple:
"Windows has enabled this device, however, this device still does not work correctly."
Then:
The drivers for this device are not installed. (Code 28)
To reinstall the drivers for this device, click on reinstall.
Then:
"Windows cannot find the driver for your device".
Get you the drivers accessing a site Web on your computer or the manufacturer of the graphics card > Search a drivers and download article > search your computer or your graphics card model number > your operating system > drivers for it: either video / graphic / Chipset (according to the label)
See you soon.
-
Hello
I recently bought a windows mouse (Microsoft wireless mobile mouse 1000). When the connection of the transceiver nano in my computer it is unable to install the driver.
I tried many fixes but none work, I downloaded the driver from the website driver Microsoft but the mouse still does not work.
When you install the driver he always says "the drivers for this device are not installed. (Code 28) Access is denied. To find a driver for this device, click Update driver. »
Why would access denied?
Any help would be great.
I am running Windows 7 Home Premium
See you soon
Robert
Hi Robert,.
You receive this error during the installation of other USB devices?
Usually this kind of error messages happen when we are not connected as an administrator.
You can read the following article and check if that helps.
Code 28: The drivers for this device are not installed
Please return to the State of the question.
-
My USB devices are not recognized, but they have a power
My USB devices are not recognized, the only ones to be recognized are my mouse and keyboard. Each device is powered (motherboard works fine), but Windows 7 isn't their read (although sometimes I'll get a code 43). I have the latest chipset.
I tried right click and uninstall each device and rebooted the computer. Nothing has fixed this.
My external hard drive, ipod and other devices that involve the transfer of data seem to ONLY get power and nothing else.
It is not material because all my devices work on my laptop. Also my motherboard works fine (it's the 2nd RMA) and it has been tested at the factory to make sure of him.
I would really appreciate help with this
Hello
Please follow the methods.
Method 1:
Run the troubleshooter from the link.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
Try to uninstall and reinstall the USB controllers
a. click the Start button.
b in the start search box, type devmgmt.msc and press enter
c. expand Bus USB controllers
d. right-click on the first USB controllerr under Bus USB controllers and then click Uninstall to remove it. Repeat these steps for the entire USB under Controllers USB Bus controller.
e. restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.
I would also ask you to contact the manufacturer of the computer to help.
Maybe you are looking for
-
Hello For my project, I like to keep track of how long my program has been run. I need to compare data that I take with the labview with another independent sensor program, so I would be able to record in real time or relative time since the beginnin
-
Win XP does not recognize my WD external hard
Greetings I bought a WD my Passport 1 TB external hard several months ago 6 or 7 times it just stop working no logical reason 5 days ago it stop working again I tried all the solutions I find such as:1. go to disk management, but can't find my extern
-
NILOX NIGHTVISION WEBCAM XP DRIVER
Hi all, I need the driver for WINDOWS XP for the NIGHTVISION WEBCAM of NILOX (code ICHONA-WC-CO2703003). Please, can you help me? Thank you Marco
-
How to find a file in Windows 7?
I've seen this asked several times before, and the same answers are always given. None of them does not work for me. I'm looking for a file on my computer. It was named something like one of them: font.txt Fonts.doc Fonts.html make. List I don't kno
-
Dear, I created a list of access-pre approval for cisco ise 1.4, depending on the Switch Configuration required to Support Cisco ISE 2.0 functions, properly profiled Cisco IP phone and download a good list of permit ip access IE, but when I make a PS