movie maker error: a video capture devices are not detected

Similar Questions

• Satellite - 14G - L855 devices are not detected in the Device Manager

  I reinstalled my Satellite L855/L855D (installed windows 7 instead of win 8). And there's a problem: many features is not found, like ethernet / wireless. Also found Radeon HD 7670 M video card. I can't install the drivers, the apears to errors that my hardware is not appropriate with the software (e.g., chipset). On the toshiba Web site, I typed the serial number of my satellite, but my computer is not found. What wrong with this laptop?

  Same problem here: [http://www.tomshardware.co.uk/forum/386506-33-devices-detected-device-manager-format-win7]

  What should I do? I tried many drivers but no one works. Please, give me advice. Thank you.

  Toshiba Satellite L855 - 14G (Toshiba EUROPE GMBH)
  Part. N ° PSKFWE-00H00FG3
  Intel(r) 3210 M i5
  AMD Radeon HD M 7670
  4 GB RAM DDR3
  Windows 7 Ultimate 64 bit

  Hello

  I ve checked the download from Toshiba on http://www.toshiba.eu/innovation/download_drivers_bios.jsp page and all the Win7 64-bit drivers are available.
  Have you tried to install all the drivers, tools and utilities from there?

• my cd/dvd does not work I get a code 10, the devices are not detected what do I do to fix these problems

  I went to the automated correction, it but still no change

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Please make all below even if you have done some before as it is often the set of operations which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• importing video WMM-"video capture device not detected...". »

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  try to import my movies from my canon camcorder. When I try to import into WMM I get this error "a video capture device it not detected. check a device is turned on and connected to the computer correctly. I use my usb cable that I use with my canon photo camera. It allows to work with two cameras, now he's going to transfer the images from the camera but I get nothing of the video camera. do I need a driver? or a new usb cable for the video camera?

  When I try to import to corel DVD maker I get "no capture driver is available in the system.

  ========================================
  What is the model of your Canon camcorder? If records to
  media other than mini DV tapes, it will not import into Movie Maker.

  Also... USB is not the best method to download... Movie Maker
  has been designed to work with FireWire.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Bluetooth randomly, and now the device is not detected

  Hello

  I bought a laptop 15-J108la want a month ago (8.1 Windows 64). I also bought a Microsoft bluetooth mouse to use with it.

  I first noticed mouse stoped working randomly, maybe 2 times a day. Sometimes it was enough to turn off and on again to get it back, but sometimes I had to reboot.

  I updated the driver bluetooth (Bluetooth 4.0 Driver Intel, 2014-01-18, Version 3.1), the problem persisted, but seemed less frequent.

  After you install an update for the wireless network card device manager today announced that Intel Bluetooth 4.0 device has been failing. Try to dissable and reactivate, but the device has simply disappeared. Now the Device Manager indicates an "unknown USB device" with error 43, and Bluetooth devices are not detected, no matter how many times I reboot.

  Any help will be much appreciated.

  Ricardo

  Using the generic drivers provided with windows 8.1 instead of Intel drivers, finally solved the problem.

  No more intermittent, peripheral stranger either.

  I was foolish enough to install the latest driver updated to Intel to see if it has addressed the problem, but it was as bad as before. I had to go back to the generic drivers, once again and voila: everything works like a charm again.

  I hope this helps others.

  And Intel: come on, you should do better!

  Ricardo

• This is a video capture device?

  Anyone know what it is? It came with a workstation about 5 years ago. I was under the impression that it is a video capture device, but I don't understand why there is a vga (?) connector on the end. Or I guess it's a connector series 15-pin. How can you "entry" for a video card? What do you give him? I suppose it could simply convert entered composite/s-video for a serial output, which then connects to a real video capture card. Isn't it? Video capture devices do not have their own composite entries?

  If it is in fact a video capture device, is there a manual for this? How to use it? Is it good?

  

  Thank you

  -Ron King

  
  

• Movie Maker error: don't have a burner...

  Original title: burner problems... Going nuts...

  I pull out my camera my chip and downloaded an hour of a band, I just went and listened to and I wanted to make them a cd of the event.  So I downlaoad Windows Music Maker... I drag a playlist as it says to do, made the selection on the right in this square box and I support on burn and he says that I don't have a burner... I don't understand it because I had a burner cuz I took before and downloaded videos on a disc and gave them as a gift.

  Here's the deal... I don't know where the burner is or what Im supposed to do to make it work again... Can someone please give me easy step by step instructions (as if you were helping a 7 years) because I am not at all computer smart... Thank you, CIndy, I don't know if this will go to my email, but my email is * address email is removed from the privacy *... (it's driving me crazy)

  Hello

  Follow these methods and check if that helps:

  Method 1:

  If you are unable to record a CD, check that the feature is configured correctly:

  Configure the settings of the CD

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-CD-settings

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Movie Maker publish error: "a recordable CD drive was not detected.

  http://support.Microsoft.com/kb/824917

  See also:

  Solve problems with publishing a movie to a recordable CD (valid also for Windows XP)

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-a-recordable-CD

• Codec in windows movie maker error when you try to import files to DVD

  codec in windows movie maker error

  I copied a VHS on DVD and you want to put in wmm. There are 5 files VTS. The first file gets the codec error, but the rest of the files will be important. So, Miss me the first 24 minutes of my video. I tried to download codec packs, but that did not help. What should I do to get the first file.

  I copied a VHS on DVD and you want to put in wmm. There are 5 files VTS. The first file gets the codec error, but the rest of the files will be important. So, Miss me the first 24 minutes of my video. I tried to download codec packs, but that did not help. What should I do to get the first file.

  ========================================
  The files you need are the. VOB files... try to rename their
  .mpg or .avi and see if you can import them into Movie Maker.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows Movie Maker error importation 'may not be imported. "An interface has too many methods to fire from.

  I'm doing a movie using Windows Movie Maker and hobby clips that I converted to VHS using Roxio Easy VHS tapes to DVD converter.  When I try to import the file into the Movie Maker, I get a message saying 'could not be imported. "An interface has too many methods to fire from.  What should I do?

  This happens usually when your source files are
  not compatible with Movie Maker. Best bet would be
  be to convert video files to WMV format
  before you import into Movie Maker.

  There are many converters available on the net... some
  free... some detail.

  The following freeware converter is just one example:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster download)
  (the file you want to download is: > FFSetup290.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the final screens)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag > FFSetup290.exe< out="" of="" the="">
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Good luck...

• Windows Movie Maker is important video imcompletely (only five seconds to hour long video)

  I tried to import this hour long video in windows movie maker, and the result is that only five seconds of the video is imported. I tried over and over again, but still five seconds of the video is imported. I have searched the Internet for answers, but impossible to find a single solution to all but one of this forum that leads to a page for the Director in windows vista, which certainly does not help. Any help on this situation would be greatly appreciated. If it helps, I am running Service Pack 2 for Windows XP Home 32-bit Edition.

  The extension is (.mpg). I've just updated to Service Pack 3, but the problem is still persistent... Right, the Windows Movie Maker version is 5.1, if it helps.

  =====================================
  The problem is the file format. If you convert the MPG file
  in WMV format, you can have better results.

  Several formats are apparently compatible with
  Movie Maker, but the most reliable choices are:

  Photos - bmp
  Video - wmv or dv - avi
  Music - wma, wav, wmv

  The following freeware can convert:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Problem with the Easy Cap Driver video capture device

  I have an EasyCap USB 2.0 video adapter and that you have installed the software, but the video driver does not load.  When I look at the Device Manager devices I see the audio drivers are installed but the video driver has the following message "the drivers for this device are not installed. (Code 28) ».  I tried to find updated drivers on the web without success.  Someone at - it suggestions?

  Hello

  What Ulead Video Studio version do you use?

  Microsoft Compatibility Center has no information on the compatibility of Ulead Video Studio.
  http://www.microsoft.com/en-us/windows/compatibility/CompatCenter/ProductViewerWithDefaultFilters?TempOsid=Windows%208.1&Locale=en-us&Architecture=X64&TextSearch=Ulead%2BVideo%2BStudio&Type=Both&CurrentPage=0&TotalPages=1&ShowCriteria=0&SortCriteria=Relevance&Compatibility=Unknown&LastRequested=14

  I suggest you to install Ulead Video Studio in compatibility and see if that helps.

  Make the programs more compatible with this version of Windows
  http://Windows.Microsoft.com/en-in/Windows-8/older-programs-compatible-version-Windows

  Post us the results after trying the steps above.

• With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  With premiere pro cc2015 why can I get this error message when reading 'timers video and audio are not synchronized?

  Hello

  Here are the steps.

  Install a cable Audio virtual on your machine:

  http://virtual-audio-cable.en.softonic.com/

  Under HW Audio Configuration configured Virtual audio cable as default input device

  And value clock maser virtual audio cable and try reading.

  This issue with the message 'Audio material e/s overloaded at 00' can be fixed, follow these steps.

  Vinay

• Windows Movie Maker can convert video to DVD with menu DVD?

  I have a few HD movies on my pc (running Windows XP), F4V type. I need to convert them to DVD with menu DVD. It is not an easy task so can you tell me how to do step by step which would explain my options, configurations. Thank you very much, Willom.

  I have a few HD movies on my pc (running Windows XP), F4V type. I need to convert them to DVD with menu DVD. It is not an easy task so can you tell me how to do step by step which would explain my options, configurations. Thank you very much, Willom.

  ===================================
  Windows XP Movie Maker cannot create video DVDs.
  You need DVD Authoring software.

  The following freeware might be worth a try...
  I am running Windows XP and it works for me.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)
  (* Read * all * the installation screens... it)
  may be a few items you want to unmark *)

  Freemake free Video Converter - how to burn video DVDs
  http://www.Freemake.com/how_to/how_to_burn_dvd_video

  Good luck...

• Error code 28: the drivers for this device are not installed for Ethernet controller

  Original title: I received an error message for, controller ethernet, the drivers for this device are not installed. (Code 28)

  I don't know how to install the drivers for ethernet controller, and I don't think that I have a CD for it. And I don't know where to go.

  Hi jhawkerchic,

  1. What is the number of brand and model of your computer?

  To resolve this problem, you must install the latest version of the drivers for the device.

  You can check the manufacturer's website and download and install the latest version of the drivers available for the device.

  You can see the following article for more information about the error Code 28:

  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Error message Officejet Pro 8600 Premium that the drivers for this device are not installed. Code 28

  Printer : Officejet Pro 8600 Premium. model CN577A

  OS : Microsoft Windows 7 Home
  Base-64

  How your product is connected to your PC? : Network

  Description of the problem : in the Device Manager I have an error message with the

  OfficeJet pro 8600 icon - "the drivers for this device are not installed.

  (Code 28)

  There is no driver selected for the item or a set of device information. "I have

  have uninstalled and reinstalled the driver without result. The printer

  seems to work fine.

  Hello

  Yes, I would also suggest a new re-installation of the software.