Problem to fill my computer to my xbox 360 please help.

Similar Questions

• Problems with media sharing of computer for Playstation 3, xbox 360, PLEASE HELP!

  I can't streaming media from my computer to my PS3 and Xbox 360 (media sharing) through her router (Network). I always listen to movies, music, photos etc from my computer on my Playstation 3 but recently the windows icon ceased to appear on PS3 when I turn it on. Also my xbox is telling me that it is unable to connect with my computer. The strange thing is, internet works perfectly fine for everything and I checked my network share settings and my computer has detected two game systems and are both allowed to share media over the network. I just can't understand why (& PS3 Xbox 360) game systems ceased to recognize my computer suddenly but the xbox live and PSN (online games) work very well. All the world had a similar problem and help me?

  Hi Sir Alex,

  Thank you for visiting the Microsoft answers community site. The question you posted corresponds to the XBOX would be better suited to the XBOX Discussion groups. Please visit the link below to find a community that will provide the support you want.

  Forums Xbox - http://forums.xbox.com/

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with WRT160N and Xbox 360 - please help

  Hello

  I recently bought a WRT160N router and when I play games online (Halo 3 or Modern Warfare 2) it takes about 10 minutes to find a game then that in the Hall. I didn't put in the door or disconnected from my profile, there's just a lot of time. It says that my NAT type is open. I've isolated the problem is the router because if I plug in an ethernet cable from the 360 to the DSL modem I find games instantly. I examined the port forwarding and open ports on the 360 and specifically for modern warfare 2 and it was actually my NAT type go as strict, ironic. I have spent 5 hours trying to mess with this and can't seem to make it work right. If someone could please help me on the settings or have any other ideas that would be greatly appreciated.

  As your ISP is a provider DSL, most providers DSL has setup their modem in DHCP Mode, so your Modem acts like a router. So, right now, your Setup is NAT behind NAT. So if you try to open the Ports on your Linksys router it does not work as your Modem Hangs only ports.

  So the best way to work is to convert your Modem in Bridge Mode and it will solve all your problems.

• Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Hello, I have version Adobe Acrobat 11. I have complete documents and send them to customers. However, when customers open the documents on their side, they are empty. The filled information are missing. Can you please help me with this problem?

  Why are publish you again? You must first answer the question I ask in your original thread.

• Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' table

  Hello! I do a menu print of tarp for a round table, I did this from ms word since I have no idea where can we make a semicircle menu upside. My problem is that it has a very low resolution, please help me how to print possibly with 3' round table. Thank you

  Oh dear.  It turned into a terrible mess of a thread with opinions and advice.    You do your layout with Word.  In my experience, Word is a nightmare when it comes to positioning many areas of text and images.

  You shouldn't have changed the Word document in a JPG file, because the text all which perfectly progressive, which would be printed to "all" size without loss of image quality, then became an image file.  But if you "had" to make it a JPG, just about the worst possible way to do this is with the Snipping Tool, because the resulting image would have only the resolution of your computer screen.  Dows following?

  How big are the pictures you used in Word?  They probably didn't need to be very large, because each image is only an impression at a relatively small size.

  First thing to try is to open the Word Document and save in PDF format using the Standard option (after you select Save as PDF

  It will keep the text in the form of scalable vector objects which allows printing at any size.  However, I don't have the knowledge of how Word uses images.  I just did a little test, and while I could zoom in to see in the text, I'm not sure that the same is true of the images.  Depends on word refers to the image of the player, or he brings as an object of frame size, and I suspect it's the latter.  You need to do some research on it, because it might make you save a lot of time.

  You have Publisher?  Editor certainly reference the drive images, and friezer downsize to fit the page.  I suspect that you can import a Word into Publisher document, which would put you best part of the way with it.  I would like to test it, but I use it as a loyal user of Adobe InDesign.   If you are forced to restart, then editor or InDesign would be lot better, but it's doable with Photohop.  Just make sure that you start with enough pixels, which means 36 inches at 300 dpi or 10 000 square pixels.  When did save as PDF using the preset high quality printing, and ask your color printer (probably just use sRGB)

  Good luck

  

• I have problem with value NULL when the use CASE statement please help this question

  I have problem with value NULL when the use CASE statement please help this question

  
  

  Table: digital_val

  SNO cl C2

  1 San1 11

  2 22 San2

  Actual result: expected to A         B

  A            B                                                                           11        22

  11 NULL

  22 NULL

  
  

  
  

  query:

  Select case when c1 = "san1" then c2,.

  case If c1 = "san2" then c2 B

  of digital_val

  I'm more curious why, when you select 2 rows, you expect a result of row?

  WITH digital_val

  AS (SELECT 1 AS 'Sno', 'San1"C1, c2 FROM DUAL 11)

  UNION ALL

  2 SELECT AS 'Sno', 'San2"C1, c2 FROM DUAL 22)

  SELECT CASE WHEN c1 is "San1" THEN END AS A c2.

  CASE WHEN c1 = "San2" THEN END AS B c2

  OF digital_val;

  With no other input, if you select 2 rows, you get 2 rows.  One of the other solutions use a max function, but is this really what you want, does not specify?

• Problem with my VM and I can not run, Please HELP

  Hi all

  It's URGENT because I have problems with my virtual maching and I can't start it and all my work is out there and I don't have any other copy.

  the problem appears as follows:

  The machine virtual version 6.0.0 is installed on my laptop on drive e. I used for a long time and space on drive E is low. I wanted to copy visual studio 2010 from my laptop to the virtual machine when I got an error which has restarted the VM, but it didn't restart and always give me this error "could not open virtual machine: Machine WS2003\Windows Server 2003 Standard Edition.vmx E:\Virtual.» ' is not a configuration file valid virtual machine. I continued to try to find a solution. «I found the empty vmx file, so I tried to solve the problem of vmx but still I don't get this error»

  File not found: Windows Server 2003 Standard Edition - 000002.vmdk
  This file is required to power on this virtual machine.  If this file has been moved, please provide its new location. «or that the error "could not open the file" E:\Virtual WS2003\Windows Server 2003 Standard Edition.vmdk Machine": one of the disks in this virtual machine is already in use by a virtual machine or a snapshot." when I continue to pass the file vmdk.» Please help me, I need the data on the virtual computer.
  Please find the last vmwarelog (vmware.log) and the newspaper 3 days ago, when he was working fine (vmware - 2.log) and the vmx and vmdk file.
  Thanks in advance

  It seems that the file descriptor for the second snapshot vmdk was destroyed (0 bytes). Please find the file recreated in the attachment. I also corrected the .vmx file to point to the 000002.vmdk descriptor. To replace the files, make sure that VMware Workstation is closed or at least tab of the virtual machine is closed.

  Since there were errors in the vmware.log, this cannot solve all problems, but it must produce at least one new vmware.log which can then be used to troubleshoot further.

  André

• window of Windows 7 inactive rest 15-20 seconds screen will go to computer connection screen and blocking PLEASE HELP ME

  I am running windows 7 Home premium when I'm on the computer on a program on the hard disk or online, it does not matter if I leave the computer set the idle for 15-20 seconds will go black on the screen and then bring up the login screen saying computer lock-down. I have to click on the photo of account back to the activation screen. PLEASE CAN SOMEONE HELP ME

  Hello

  Thank you for using Microsoft Community.

  I'm sorry for the late reply.

  I suggest you try the following steps and check if it helps.

  a. click the Start button and then click Control Panel.
  b. click "appearance and personalization".
  c. click "change screen saver.
  d. uncheck "On Resume, the logon screen".

  You can also check the power options and disable the sleep if you want that the computer should not go to sleep mode if it remains unused. Follow these steps:

  a. Click Start button and type power options in the search box start and press ENTER.
  b. click on "change when the computer sleeps.
  c. Select "Never" for the option "put the computer to sleep.

  Please answer with results so that we can help you further.

  Thank you

• I have problems on windows 7 64 bit of fallout 3 Please help me

  Fallout 3 for windows 7, I bought some time ago and before that I could play, but now it crashes when I try to start a new game someone please help me

  What are your system specs? FO3 will run on Win7 with compatibility for spe SP or sp1 for Vista.
  There are also one couple of other fixes not related to Win7.

  (1) the game has a problem with the quad-core processors
  Open the fallout.ini file in My Documents\My Games\Fallout3 (make a copy first to backup)
  Find the line:
  bUseThreadedAI = 0 (open the ini with Notepad file - click on Edit - can find - copy this line and paste it into the find what box)
  her take: bUseThreadedAI = 1
  -Add another line (press ENTER on keyboard) after him and insert: (copy and paste the following line)
  iNumHWThreads = 2
  -This limit the set for 2 hearts and prevent the engine bug to cause the game to freeze.
  (2) download and install Windows 7 Codec Pack - this will fix a problem with ffdshow codec.
  http://www.windows7codecs.com/
  (3) install the latest drivers for you graphics card and audio of the mfg web site.
  (4) updated Direct X with the installer of X Web live - should be done even if there is no problem with Direct X with FO3.
  Download details: DirectX end-user performance

  (5) install all the Windows Update 'important', but don't forget to setup as Windows updates in order to not
  install "optional" without you updates by selecting, in particular drivers graphics.

  If you still have problems please visit FO3 Nexus - the best site for all games - Bethesda
  Nexus Forums

  EDIT: I recently bought a 120 Hz monitor and just discovered the game freezes up if the
  monitor is set to 100 or 120 Hz. 60 Hz has no problem.
  .

• DELL XPS ONE 27 - no HDMI is not detected with a xbox 360. Help!

  Hi,
  

  I have a problem:
  

  I have my Xbox360 connected to a desktop computer all in one Dell XPS One 27 "with an HDMI cable and when i change the input from Computer to HDMI the monitor does not recognize the Xbox360 and get a screen black and a sign saying "No video on HDMI input detected".
  

  The issue is that my monitor has a resolution of 2560x1440 and I think the maximum resolution that gives Xbox360 is Full HD (1980x1020). But I read that the Xbox360 still have to re-scale the image until it is appropriate (ergo, leave black edges to complete the remaining pixels or, failing enlarge reducing the quality of it), right?.
  

  Anyway, I have also tried to change the resolution of my computer and neither detects Full HD HDMI (and I'm not sure that the Computer resolution remains once I make the switch to HDMI, but in principle, yes).
  

  That's it. I have asked in shops and specialists and everyone tells me that it is possible, but I do not see where it may be bad or failure.....
  

  Thanks in advance. :)
  

  PS: The cable I use is standard HDMI cable and the Xbox is FAT Xbox360.
  

  Hello.

  To resolve this problem, you will need to check that the HDMI cable is ENTIRELY in the HDMI PLUG! Believe it or not! The HDMI on the back of the OIA 2710 is a tight fit, and I thought I was going to break the taking, but he won entirely, and the xbox was on the screen.

  THE SOCKET IS A TIGHT FIT!

  MAKE SURE THAT YOUR HDMI SOCKET IS * ENTIRELY * IN.

  SHOULD THERE HAVE NO HDMI METAL SHOWING!

• Stuck in the loop now accepting the new terms of use on Xbox Live Please HELP!

  I am stuck in a loop of redirection while trying to accept the new terms of use for XBox Live. I have a child account parental consent is required. I KNOW im putting the good info because when I put wrong information, it tells me that the password is incorrect. When I put the correct information and click identify you, let's return to the page where I have to click on I accept. Is this a problem with Xbox.com? Is this a problem with my account? Can someone please answer this question? Ive been very angry, because it has been updated. Please, I just want to play online and talk to my friends. Any help would be highly appreciated. Thank you!

  Try Xbox support:
  http://support.Xbox.com/en-us/

• (Vista) computer does not start properly (Please HELP)

  My guarded vista stop without known reason. He started up the main login screen and I could connect. After that so long it would just turn off. I did a system restore, system repair at startup and F8 pressed and is entered in safe mode. Now, I have a new problem. He worked for a few hours. Enough to do a bit of homework. Then suddenly it disconnects and begins to do the updates for windows. Then it goes to a black screen and tells me what he planned for a clean disk. So he goes through this process and restarts. Now it is impossible to get pass Part 3 of 3 updates and it just stays at 0%. He will remain on this page for about a minute and just keeps restarting itself. I tried F8 again and cannot get into safe mode. WHAT IS WRONG WITH MY COMPUTER HELP ME! (PS: now I use my laptop which is a XP!) Help, please!

  Hello

  Follow the troubleshooting methods in this article to resolve the problem:

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• Computer does not start! Please help me?

  Hello

  don't know much about computers, therfore go easy on me. My computer won't start I have no recovery disk, it came not with the PC. How can I recover my PC? Thank you!!!

  Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to get Vista recovery Media or the Vista recovery Partition on your computer back to factory settings.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Redirection problem of record Smartphones blackBerry on my Bold 9900, please help

  Hello world

  I wonder if you guys can help me. I have BB bold 9900 and reconciliation works only to unread and read messages, but if I move any email or delete my Outlook, he won't have the effect on my BB device.

  Help, please.

  Thank you

  Bezi

  Thank you for your help,

  My problem solved,

  Solution:

  in the BlackBerry, need to go to messages and select options then display and action one finally check the "hide messages from field' and save it.

  Oh, Lool had after a few hours to play with the options.

  Thanks again,

  Bezi

• try to disable the items from an old computer that no longer works please help!

  tried to go through the text following steps how to disable the Adobe ID but I don't have a button 'manage plans '. My old PC that had my photoshop elements above no longer works after moving cross-country.

  When you have a non-functional computer and cannot turn it off, click on the link below

  Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations