window of Windows 7 inactive rest 15-20 seconds screen will go to computer connection screen and blocking PLEASE HELP ME

Similar Questions

• Windows 7 Internet on the main office/main screen being blocked please help

  For some reason any Windows 7 does not allow programs download from the internet. Programs (Adobe Digital & OverDrive Media are the two main) used to be able to download, but they no longer work. I've placed on the green list to come through the fire wall and I'm not running on a proxy server. I'm at a loss as to why he worked for years and now he's no longer. I tried the two patches that were given for both programs and nothing has worked. For Overdrive Media I get the answer that it is not connected to the internet and to digital Adobe, I get a different error that I looked and it said that the program could not through the firewall, changed cela setting and still have the same error. I also used to get the tab accu-weather on the top of the scree, but now he tells me that I am not connected to the internet. But clearly, I am as I am typing this question. Even gadgets that provides windows that can be placed on the main screen, like a clock and weather report that they are unable to connect to the server, that's why I think that it is not the firewall that is causing this problem I tried to disable the firewall and Windows program and I still have the same question. We did not have any changes made to our Web server or provider and the internet seems to work fine as well. I have also just finished a computer virus scan to determine if there is a problem here and nothing came. I tried to unplug the router to reset my IP address and that did not help. Any suggestion would be great.
  Thanks in advance for any help
  See you soon
  Janine
  Oh also note, my utorrent program does not seem to have any get what throughoh transmitter and the main provider of internet if I use Firefox.

  Hello

  A lot of programs in a Windows 7 computer that depends on the connection to the internet are controlled by settings of Internet connection in the computer. We can access these settings by going to Internet Options of Internet Explorer.

  You can check if your Internet Explorer is set to work offline?

  You can check that by following these steps:

  1. open Internet Explorer.

  2. Once Internet Explorer is open, press Alt and F together on your keyboard keys.

  3. make sure that the work offline option is not selected in the drop-down menu that appears.

  If your problem is still there, you can check these settings once:

  1. press the Windows and R keys on your keyboard to open the run box.

  2. in the run box, type inetcpl.cpl and press enter on your keyboard. This should open the Internet Properties dialog box.

  3. click on the connections tab.

  4. then click on LAN settings.

  5. make sure, none of these options in the local network settings are selected. If none of these three options have been selected, please deselect the and click OK.

  Now please check whether or not your gadgets and other programs that had the issue work.

  I hope this information helps you. Please respond with the status of the issue so that we can help you further.

• Start normal mode after windows xp bar charge it gives black screen and in safe mode it gives blue screen

  Victorinox original title: Black scree & blue screen...

  So my laptop that is running Windows xp, start in normal mode after windows xp bar charge it gives black screen and it stays like this, and in safe mode it gives blue screen, what can I do? I need your help atleast to save the files to my hard drive...

  Hello

  · What is the error code or error message that you receive when the computer starts in safe mode?

  · Were there any changes made on the computer before the show?

  · What is the number and the model of the computer?

  · Who is the service pack installed?

  Try the methods below:

  Method 1: Disconnect all the devices connected to the computer such as printers, scanners or USB hard drives and restart the computer and check if that helps.

  Method 2:

  Try to start your computer in last known good configuration. You can check the link for the procedure: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 3:

  You can follow the steps listed in the link: after the Windows Logo appears, or after you log on Windows, a Windows XP computer can display the wallpaper, a black screen or a blue screen: http://support.microsoft.com/kb/318027

• How change the size of the window on firefox so do not whole screen and have empty spaces on the sides of the window

  My cat stepped on my laptop and my window size now takes up the entire screen, and there are a bunch of empty room on the sides of the window. How can I fix it to fit the window to the web page of GI on?

  Try to press the "F11" key on your keyboard (Note: some portable computers require that you hold a "Fn" key to press F11).

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• I want to use Windows 7, the computer will not accept my 25 digit product code please help

  I want to use Windows 7, the computer will not accept my 25 digit product code - please help.
   

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive.

  Upgrade of Windows 8 Blurry\Fuzzy Pro install dvd screen and a flash drive. Each screen is blurred during the installation. Managed to get

  It is installed. A great until I had to reboot after the installation of windows updates. It starts with the first good looking for Windows 8 logo then

  the monitor turns off and the computer is still running. Reset and I get the windows repair screen. Sometimes, his clear and sometimes

  its blur. I have a motherboard Asus M2N with a Nvidia geforce GT 240 video card. I'm guessing that the windows install 8 pro and pre of initialization

  use some funky video drivers before windows loads the correct nvidia drivers. Microsoft needs to do a better install disc that allows to display the

  graphics correctly. Windows8-UpgradeAssistan does not really check very good material. I ran the windows 8 developer preview and it

  had no problem. Y at - it a hope?

  Hi SteveSimmons,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  I suggest you install the latest drivers from Nvidia geforce GT 240 for Windows 8 from the link below video card:

  http://www.nvidia.com/download/index.aspx?lang=en-us&ptid=1&PSID=52&PID=0

  I hope that the information above helps you.

• When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  When you try to install the trial version of Dreamweaver on my Windows desktop, I just see a white screen and nothing happens, except for the blue squares moving. I'll just wait? For how long?

  It could be the browser problem because the site is up and running, could you please try another browser.

  If same thing happening there so kindly go to Adobe CC 2014 Direct Download Links: Creative Cloud 2014 Release. ProDesignTools and download the desktop here CC application.

  Note: Please follow the instructions very Important, otherwise the download does not start.

  -Pierre

• 6 of Lightroom. When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  When I opened to develop & load an image from the image after is removed a pale blue screen.  If I shared the screen I can see the front of the image but the image after rest as a blue screen. Clues please?

  Most likely, LR has problems talking to your video card.

  In the Preferences dialog box, tab Performance, disable the use of the GPU.

• I have a second window open on a second screen, and I want to keep constantly active.

  Currently, if I click on something else, IE Skype on my laptop, the second screen goes idle and narrows mode full screen.  How can I stop this from happening?

  Hello

  If you make reference to the window becomes inactive then this is normal because at some point, there may be only one window that could be highlighted and which would be not active.

  However, you can publish your comments for us on the link below.

  http://connect.Microsoft.com

• I start my computer, a white window appears in the middle of the screen and I can't remove it.

  Every day when I start my computer, what a white window pops up in the middle of the screen and I can't remove it.please can anyone help.

  Cannycarol

  Hello, Carolyn,

  Windows operating system?  Windows XP, Windows Vista, Windows 7?

  Are you capable to perform a scan for malware?  Download the tool from this link and run a full scan

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&id=16

  You are able to surf, read email, etc.?

  Is there a message "year Unknown Error Has Occurred."

  You are able to go into the event viewer and look for errors - the impossible event ID

  You may have to reinstall Windows

• Impossible to install any programs, it says that my windows install is not installed correctly, but it will not let you install anything to fix. Help!

  the major difficulty. I can't install anyting because it keeps telling me that windows install is not installed correctly, so it will not allow anything to be mounted

  [Duplicate of http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/45b2ba57-1a5a-4d3f-99a1-431e414cf5b5] ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My laptop with Windows Xp does not connect to the internet, please help me!

  Then my laptop, as indicates it works on Windows Xp, but even if I'm supposed to be connected to my home network, when I run Internet Explorer, it can not connect to internet. Any help and insight will help. Please help me!

  I'm sorry that had to retype all of this, but in essence, that everything indicates that things work correctly with your Internet connection.

  To translate, the first bit tells us that your router assigned your computer 192.168.0.12 IP address.  The own IP address of the router is 192.168.0.1

  The result of ping 127.0.0.1 indicates that your computer can communicate with itself (the adapter is OK)

  The 192.168.0.12 ping result indicates that your computer can communicate with your router (that we already knew because otherwise your computer don't would not have been assigned an IP address).  It also means that you are connected to your local network.

  The result of the ping 192.168.0.1 is similar to the 127.0.0.1 test.

  And finally, the ping Google result shows that you are able to access the Internet.

  Knowing all this, you probably need to reset TCP/IP or Winsock, or both.

  Manually:

  Open a command prompt window and type

  netsh winsock reset {enter}
  netsh int ip reset c:\resetlog.txt

  Or see these two articles from Microsoft, include the two "FixIt" links
  How to reset Internet Protocol KB99357 How to determine and recover from Winsock corruption 811259 KB 2

• I HAVE A WINDOW VISTA HOME PREMIUM... MY RECOVERY DISK CD IS LOST... PLEASE HELP ME I'M LOOKING FOR MY RECOVERY CD

  I SAW THE PROBLEM AT THE START OF THE WINDOW AND IT CRASHES ALL THE TIME...

  MY STARTUP LOADS VERY SLOWLY...
  AND ALSO, I AM UNABLE TO TURN ON WINDOWS DEFENDER. IT SHOWS THIS MESSAGE TYPE. PROBLEM WINDOW DEFENDER
  0x800106ba.kindly help me
  AND ALSO ME SAYING HOW CAN I ORDER MY MICROSOFT RECOVERY DISK... BECAUSE MY RESTORE CD IS LOST...
  PLEASE HELP ME...

  Microsoft make nor sell recovery discs, these are only available from the manufacturer of your computer, so you must check with them to see if the discs are still available.

• I need more space after an upgrade to Windows 7, cannot remove the gadgets and sidebar, please help

  I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.

  such as word/excell/adobe suite.

  There is nothing on my computer but undesirable, gadgets and games, and there is no space left. How can this be?

  I read that Windows 7 makes your computer faster and better, work how in the heck he will do that, I can't even use my computer because I can not re - install my stuff.

  Windows 7 ultimate me blocks to remove gadgets and the sidebar, I removed all these on my vista so I could install and use my suite of adobe for school

  I'm panicking, I chose to do this on the weekend, so it would not interfere with my school and work, but now I can't do anything. I tried to call Microsoft, but they have no help available

  Please someone help me?

  Thank you

  Gina

  I performed an update custom Vista Ulitmate Windows 7 64 32, before to do it, I had all 20 to 23 GB of free space on my C at all times, now, after the update I Go 14.3 left and I don't the have not even re-installed one of my settings, or any software.

  Free space - increase the hard disk space

  The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.

  1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
  2. in the drives list, click the drive you want to clean, and then click OK.
  3. on the Disk Cleanup tab, select the types of files to delete.
  Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
  4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.

  Reduce the amount of space allocated to system restore.

  1. start--> panel--> system and safety--> system
  2. then click on the "System Protection" link located at the top left.
  3. in "System Properties" window, click on the "System Protection" tab
  4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
  5. now, click the "Configure" button to change the settings to restore "disk space".
  6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
  7. click "Apply" and then the "OK" button after setting the disk space.

  If you have a huge amount of RAM the pagefile and hibernation can occupy a large amount of disk space. 6 GB of RAM can cause 12 GB of space to be resumed by using the default settings of Windows.

  1 put the hibernation - note: you will not be able to sleep extended
  A. click on start
  B. Select all programs--> accessories
  C. right click on CMD.exe and select run as administrator
  D. at the prompt, type how: powercfg-h off
  E. press ENTER, then exit CMD. You may need to restart

  2. reduce the size of swap file
  A. open Control Panel and select system and security.
  B. click on system
  C. click on advanced system settings.
  D. click on the Advanced tab.
  E. in the performance section click on settings.
  F. click on advanced and select change in the virtual memory section.
  G. uncheck automatically manage Pagefile size
  H. Select custom and

  
  I. enter a new amount. Enter the same number in both boxes. Minimum: 1 GB (or 1024MB).
  I. click on set, then OK.
  J. restart your computer

  Delete Windows.old on your C: drive

  Usually, but not always, after installation of Windows 7 you have a Windows.old folder on your C: drive that contains your files and data from the previous installation of Windows and allows you to go back to a previous version of Windows. Open Windows Explorer and under 'Computer' click the C: drive - if the Windows.old folder is on your hard drive, it will contain all of your files to the Windows system, and it can be removed if you do not need to free up space on your hard drive.

  If she's not here, make sure you can see the Windows.old folder:
  1. click on start, type: hidden
  2. click on 'display the hidden files and folders '.
  3. Click to select "show the hidden files and folders".
  4. click OK and look for the folder
  (Note: when you go back and uncheck the "Show files and folders")

  How can I remove the Windows.old folder?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-the-Windows-old-folder

  If the Windows.old folder does not remove:
  In Windows Explorer, you should see a folder called Windows.old on your C: drive. That contains all of your files from your previous installation. If you need all the files, you can copy them to another folder and then delete Windows.old. If you do not need anything in the folder, it is safe to delete.

  Questions about installing Windows 7?
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• 7 merger, El Capitan, dual display: Windows now refuses to use the second screen

  Fusion 7.1.2

  End 2012 27 "iMac (2560 x 1440, 2.9GHz i5, 24GO RAM) with a 24 '' Dell Ultrasharp (1920 x 1200) connected by a Thunderbolt-HDMI connector cable.

  Guest operating system Windows 7 (and a couple of VM Ubuntu, not relevant here).

  Before, I would start merging and Windows 7 would start automatically, as it has to do. He will start in his own space and use two screens, with the windows desktop 'main' (with the taskbar on the screen of the Mac) and the Dell used to extend space office (just like OSX).

  I just upgraded to OSX to El Capitan and now it's borked:

  1 Windows 7 starts automatically with Fusion (despite still be configured for this purpose). It is a minor annoyance but nothing more.

  2. that's the real problem:

  Windows displays the "BIOS" screen, and then the graphic screen "starting windows", then goes black. In preview VM library, I can see the login screen, but in the space of Windows, nothing. Just black.

  When it happened first, I disconnected the monitor Dell, rebooted, logged on to Windows on one screen, then plugged the Dell back in and it worked. However, reconnected the external monitor on each startup of the machine is not my idea of fun or "just work".

  I changed the display settings of VM Win7 molten (changed "use full resolution for the retina display" section, "Scaled high resolution" 'Unity only' drop-down to "all display modes" and now I can see the Windows login screen in half the width and height of the main screen.) If I log in I get two desktops to a Windows display value, crammed into the width, and half of the height of the 27 "display, with nothing on the external monitor. No amount of reconnected does not change this.

  I restarted the VM and OSX more than once since upgrading to El Capitan, so a simple reboot won't be the solution.

  Help!

  He drives me crazy, any suggestions?

  I had another couple of VM Ware support calls and there is a solution (which works for me) and a fix promised in the next version of Fusion 8 (I presume it comes to version 8.0.2) which should be days (rather than weeks) away.

  The fix may or may not be folded in to Fusion 7.

  The workaround is: parameters of OSX--> Mission control--> check "screens have a separate space.

  The downside is that when dragging between spaces, you often have to swipe the two screens, top menu bars have more two screens in OSX, but I can cope with it for a few days.