Problem to set up my memory home game in my pc

Similar Questions

• I have a laptop Lenovo bought in the spring of 2008 running on Vista Home Premium. After years of basically no problem, I got warnings my memory was almost full.

  I have a laptop Lenovo bought in the spring of 2008 running on Vista Home Premium.  After years of basically no problem, I got warnings my memory was almost full.  I'm no computer guy, I'm a retired OTR trucker who now lives for people with disabilities.  I checked my system and found Lenovo had two partitions on the hard drive.  The main logic were my programs were only 30gig on a disk hard 150 gigabytes.

  After talking to some friends who know more then me and research, I copied all my personal files on a stick to 4gig and erased the hard drive.  Spent New Years day adaptation of files, wipe the HD, install Vista again and then 6 and hours of updates.

  Monday, I installed my old files, installed new software and reinstall some of my previous, as well as several updates of Windows.

  Tuesday a finer adjustment and more windows updates.

  Today, Wednesday, right off the bat I installed another Windows update.  Update has been installed, computer shut down, restarted, then the computer stopped at step 1 of 3 @ 97%.  I went for half an hour to come back to an error screen telling me I had a corrupted file and to reinstall Vista and using my factor disc repair system.  I wasn't allowed this option.

  I subsequently through trying different restarts that File:\Windows\system32\winload.exe has been corrupted or damaged or missing Windows update attempt.  Given that I had my Windows disk that I was never worried before making a boot disk.  I/we (family of 6) do not have the financial means to purchase recovery discs, go to a tech help.  We are ourselves.  Can someone help me out here?  Are all my personal details on my laptop, a lot of money and time tied up in programs, I can't access.

  I don't know how this forum works.  My email is * address email is removed from the privacy *.

  P. S.

  With all this, if I have to reinstall windows I better upgrade to a 32-bit on a 64-bit?  This will cause problems with existing programs? I see a noticeable improvement in speed?  I checked and I can't change to 64-bit.

  Hello

  Since you have a Lenovo, you can try to get to WinRE among advanced startup options (f8) and performa than a system restore or if you must organize a drive to install Windows Vista full version and try to perform a system restore in Windows recovery environment and check if that helps.
  For more information, you can consult the following articles:

  What are the system recovery options in Windows Vista?

• Problem with setting window of acquisition on 1429 PCIe capture card

  Hi all

  Recently, I am using the Basler A504k camera with card PCIe-1429 of goodwill for the acquisition of images at high speed. I found problems with setting the acquisition window in the capture card using Measurement & Automation Explorer.

  1. for example, if the size of the original image is 1280 * 500, if I put the window of acquisition with left 0 and width 1280, everything is OK, but if I set the width to 1279, there will be an error (error 0xBFF6002C FIFO overflow caused the acquisition of stop), if I set the width multiple of 8, there was no error. Could someone tell me why in this case, is it because the packet data transfer for acquisition card rule?

  2. the window of acquisition is set according to the camera image, right? If the camera has also a function of area of interest, the acquisition window setting is always the image coming from the camera.

  Attachment is my setting a MAX software.

  Thank you very much

  Hi xiaochunfly,

  My bet is 1280 pixels image size is aligned on 32 bytes, and the material may actually go from line to line without breaking the transfers. With the width of the non-aligned countries, he needs to start a new transfer on each line, and this has an additional load on the PCIe bus and the system memory bus. Currently infrastructure IMAQ trying to adjust to any size of border/size possible image regardless of efficiency, it take the material and changes in recent processor Intel chipsets have reduced effectiveness with system memory bus performs under these conditions. So, you can get much better performance if you use line widths. You can also get the latest IMAQ driver because there was changes in the latest few transfer more effective under some of these conditions.

  AOI is usually under the framegrabber. If you reduce the AOI who sends the camera, it seems often identical to the framegrabber as if you just had a camera with a smaller sensor. Thus, your AOI in IMAQ must be set to the size of that the camera is sending, unless for some reason you want to capture less of what the camera is able to set up on its own.

  Eric

• Serious problem! Periodic drop in framerate in games because of Windows 7

  
  

  Hi all

  
  

  I'm having a serious problem after installation of Windows 7 Home premium 64-bit. Initially, I thought that it was due to external cooling fans not working not properly and so went out and bought really powerful Antec fans. But the question continues to prevail. I play all the games running at 60 fps with no problems, but after a few minutes, the framerate drops to 20 to 25 images per second, then after a few minutes, it goes back to 60 frames per second. It is very annoying and happens to all my games.

  I searched online for similar issues and saw that many people have this problem with Windows 7, looks like there is a caused overheating GPU. However, no one has a solution to install Vista and get rid of Windows 7.

  I use a laptop with 1 GB of Geforce 9800 m GTS. This problem really wear out my components of the laptop because of the heat and so I stopped playing games! Now there is a solution for this? Forward an answer soon for this serious problem!

  
  

  :( Fan issues appear to be limited to Windows 7 and related BIOS, so if it does not work under Vista, there is probably something else going on... I could be wrong on this issue, I just noticed most of the complaints pointing to an upgrade to Win7 as the cause.

  Check out post #27 here: http://vip.asus.com/forum/view.aspx?SLanguage=en-us&id=20090803062546406&board_id=3&model=G50Vt&page=3&count=27 . You can also try looking through this thread more, or see what Google has to say, but in the blink of an eye that seems to be the only success in the thread at least. Others is 'never had the problem', or had not found a solution.

  This user sent the computer in ASUS for repairs, and he came back very well. Other than to clean all the dust, which seems to be your only option.

  Good luck!

  PS You can also try an other BIOS using the Flash utility and the BIOS of your laptop available on ASUS support site, but I have not seen any report of success of this.

  I gave up trying to fix it and just called asus today and they told me to send since its still under warranty, I guess it's a hardware related issue and not the associated software =)

  There is simply no other way around it other than to send to repair... Thanks for your good help.

• My partner loves Cityville and Frontierville. Recently she can't read. He keeps asking him to download flash player 10. It does not cure the problem. I can still play these games on main pc

  My partner loves Cityville and Frontierville. Recently she can't read them on his laptop. He keeps asking him to download flash player 10. It does not cure the problem. I can still play these games on main pc

  As a general rule, it allows to uninstall completely all the previous versions of Flash Player before installing a new one.  See the following articles:

  Uninstall Flash Player: http://kb2.adobe.com/cps/141/tn_14157.html
  Troubleshoot Flash Player installation: http://kb2.adobe.com/cps/191/tn_19166.html
  Common download problems and installation of Flash Player: http://www.adobe.com/products/flashplayer/support/index.html

• How to set up a network home wireless?

  Original title:

  Wireless home network

  Well, you talk to me like I'm a child of 7 years! How to set up a network home wireless with 2 computers?

  Hello

   
   
  You can try the steps in the following links and the check if it works.
   
  
  5 steps: how to set up your network wireless home.
  http://www.Microsoft.com/athome/organization/wirelesssetup.aspx
  
  What it takes to set up a home network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-you-need-to-set-up-a-home-network
   
  Set up a home network.
  http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network
   
   
  I hope this helps.

• There are a few problems with some of my tiles (Mail, games, music, etc.).

  Original title: Windows Mail (tile)

  Hello everyone.

  I had a few problems with some of my tiles (Mail, games, music, etc.) so I have WSReset.exe and since then I could not find one of these tiles. I searched the Store and tried to re - install, but it says that I must admit. I don't know what to do. Please help me...
  Thank you...

  Hi rap.

  Thanks for the reply with the status of the issue.

  Here in this scenario, you need to refresh your computer after the backup of your data. Refresh your PC reinstall Windows and keep your personal files and settings. It also keeps the applications provided with your PC and applications that you have installed in the Windows store.

  How to refresh, reset or restore your PC:

  http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PC

  Note: refer to the section "refresh your PC without affecting your files.

  Warning: Apps that you have installed Web sites and DVD is deleted. The applications provided with your PC and applications that you have installed in the Windows store will be resettled. Windows puts a list of apps removed on your desktop after you refresh your PC.

  If you do not have installation media, you can see the following article from Microsoft Help to create installation media.

  http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media

  Note: The steps also apply to Windows 8.

  Please reply with the status of the issue, so that we can confirm that the issue is resolved.

• I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  I have problems with setting up my Gmail in my room light 6 mL, where do you think I could get help for this?

  Hi kikikilala,

  Please explain the problem you are oriented connect Gmail with Lightroom

  Try reauthorizing your Gmail account once in Lightroom and see if that helps.

  Refer to Validation of Gmail failure

  Kind regards

  Assani

• Problem with server Supermicro laboratory at home, ESXi sets in not as server restarts always

  Dear community,

  I'm having a problem that makes me nuts and I was wondering if you can help me with this.

  While trying to set up a laboratory at home (I think it's often referred to a "white box" system)? I don't get the operational ESXi installation. For three days, I was not able to install ESXi.

  Problem:

  ESXi 5.5U3 installation fails and immediately restarts the host until it starts doing anything... specific.

  Using IPMI my motherboard I recorded (and also attached) a video and tried to integrate it here:

  In case you don't see it please look at the attachment.

  For those who do not see the host starts and begins to extract the files in memory. When he goes to the grey-yellow screen it shows the following lines and then - BOOM - restarts the host and it again:

  Initialization of the moment...

  Initializing Scheduler...

  Initializing power management...

  the user successfully loaded.

  RESET

  I tried several options, such as the boot via USB, both internally and externally, to change between USB 2.0 or 3.0 port or IPMI ISO loading but nothing, all this goes down with the same problem or even f * cks up to my output video when you attach a file ISO storage KVM. Disabling USB legacy support also solves nothing and even had to reset the BIOS thereafter. Also to make sure that it is not related to the RAM, I changed the memory and tried with 8 or 16 GB or 32 GB full and also tried different banks, no change.

  It is the material that I use:

  • Supermicro X10SLL-F
  • Kit of UDUMM 240-pin ECC Kingston 32 GB (4 x 8 GB)
  • be quiet 400W power
  • SATA 250 GB HARD drive (or without)
  • Lexar 8 GB USB stick (formatted with Rufus) / anonymous 4 GB USB Stick

  As described above, nothing I tried quite fix it and I start to feel the distress of one.) "(ne pas pouvoir continuer et b.)" After spending a lot of money on things that don't work (and I'd rather not things).

  I know that, currently, this motherboard is not himself but factually have seen several blog posts of people who use this motherboard with success. Why am I the only one who can not do?

  Oh any by the way, the ESXi version is this: VMware-VMvisor-Installer - 5.5.0.update03 - 3116895.x86_64.iso

  I hope that someone out there is able to help me.

  Thank you in advance for your help!

  Believe it or not, it was the power supply.

  All those who try and random restarts as beds me days were due to the poor being quiet power, hopefully, at some point this will help everyone.

• Problem: Screen size is smaller in playing games.

  Detail: I loaded my games but his cheek in a small screen (800 X 600) with the rest of the laptop screen blacked out.
  I tried to play with the game options and laptop screen resolutions has also changed and nothing seems to work.

  But when I connect my external screen so all my games is displayed in full screen on laptop (screen Eintre area)!

  Also when I reduce my screen resolution, my display on the screen become smaller (I belive it should be bigger...) Right?).

  I have already updated the driver for my card ATI Mobility Radeon 4570 for later but nothing helped.

  Can someone please suggest a solution.

  System:
  Dell Studio 1557 (display 15.6)
  OS: Windows 7 home pre.
  Display: ATI Mobility Radeon 4570.

  Thank you very much..

  Hello

  This happens to you with a game or all games?

  Do a right click and go to the shortcut properties and find the box where it says 'run' pass the value normal in full screen.

  If this does not help, configure the following setting and check:

  (1) right-click on the game shortcut icon, click on properties.
  (2) on the shortcut tab, go to run.
  (3) in the drop-down list, select expand.
  (4) click on apply to apply the setting.
  5) click Ok to confirm the change.

  Also, I suggest you try changing the hardware acceleration, here are the steps to change the hardware acceleration.

  1. Select start > Control Panel
  2. in the window of the Control Panel, click appearance and personalization
  3. click on personalization > display settings, and then click Advanced settings.
  4. go in the Troubleshooting tab, and then click on change settings.
  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.
  5. move the hardware acceleration slider until it is one notch to the right of None. It is the basis of acceleration.
  6. click OK twice, and then close the window.

  You can also see this thread and find the solution posted by fix ' that1.guy on Saturday, January 2, 2010 02:06 "user of the problem.

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/2ff8212d-8656-4ced-9da1-21deed2c6c2a 

  I hope this helps!

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems pictures copies of Flash memory card and USB drive under Vista 64 files

  Hi, when I insert a flash memory card (SanDisk 8 GB SDHC or SanDisk 2 GB Compact Flash) either by inserting the card into a card reader, AutoPlay comes on but the image transfer stops after a few images have been copied to any program (Windows, Picasa, etc.). I chose to copy the files. Same experience when I connect the camera with the memory card in the camera using the USB cable to the PC. I tried to re - format camera memory cards, but it has no effect.
  Also, I feel the same when I try to copy from a USB flash drive (the drive is basic, not a U3 key).
  I have a HP Pavilion m9400t Elite desktop running Vista Home Premium 64-bit. I own this desktop computer for a year and I've always had this problem. I have no problem using these flash memory cards and a USB drive on my old XP PC or an Apple Mac Book. For what I can tell, my Vista desktop is set for automatic windows and updates from HP. Everything about the plan of updating drivers, etc., which would solve this problem would be appreciated.
  Thank you
  Srini

  Hi Srini,

  one) that you get specific error messages when images are arrested to copy?

  (b) what is the file format of the pictures\files that are not copied? What images are copied with success?

  To narrow the problem, please follow the steps mentioned below:

  O copy the pictures manually on the flash memory card Office.

  O connect the flash memory card\ camera to the back of the computer (for a different USB (port universal serial bus) and try to copy the pictures\files.)

  O check if the photos are in double version:

  Windows detects your newest pictures and doesn't matter the duplicate versions of the old photos that you've already copied to your computer

   

  He may want to know:

  How can I get pictures from my camera to my computer?

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-pictures-from-my-camera-to-my-computer

  Troubleshoot camera connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/Troubleshoot-camera-connection-problems

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problems with iPhone 7 Plus the 'home' button?

  Today, I stopped at a store and looked at the time of 7 more for the first iPhone. I was curious about the new home of the haptic button.

  I didn't feel a thing well. I thought there might be a setting and so I asked a salesperson. He said he "thought" he could feel a bit and had me try things like closing an application and return to the home screen. But no matter how gently or strongly I pressed the home button, nothing happened. Once opened Siri, but then I couldn't close it.

  He couldn't have worked either do.

  So, while I admit that my "sampling" is small, with 100% of all so far the 7s iPhone I tried the home button does no haptic feedback and does not work well.

  As it was a display model, of course, I'm curious - are these kinds of common problems?

  I just posted my concern in this regard. I have the 7 +.

  and the home of the Taptic button does not work. I have to still physically, press on the

  button as I did with the 6 +. So what is the difference?

• Problems connecting Toshiba L64 TV network home

  Hello

  I'm fighting for a TV LCD of Toshiba L64 to connect to a home network. I tried easy, assisted & manual configurations.

  I get the message "Cannot connect to AP" Please check your setting & try again.

  I noticed that the Mac address on the back of the router (a Technicolor TG582n) and one identified by the TV are different by 1 digit at the end of the address - this could be the problem?

  Thanks in advance for any help.

  Thanks for your comments!

• problem with a block of memory in labview 2009

  Hi all

  I have "ERROR: MapLib:979 - LUT4 symbol" during the compilation process (lots of errors like this), and I discovered that the reason of my problem is block of MEMORY.

  To be sure that the problem is in this block, I did a very simple project in LabView 2009 (on FPGA Target PCI5640R) only with the use of this block you can see in the photo, as well as in file test_memory block.lvproj attached link: https://www.dropbox.com/sh/u87f1oihelmm4dq/Jo_6-bICSf

  

  I have a problem with compiling VI with this block, and I have so many errors like:

  ERROR: MapLib:979 - LUT4 symbol
  "window/Thatcher/n_00000036/nSCTL_00000013_00000014/n_000000A3/cOutLoc<0>1.
  (output = window/Thatcher/res000001ed_wi<2>) is the input signal
  "window/Thatcher/res0000020d_wo<1>" that will be deleted. See Section 5 of the
  Map a report file to find out why the input signal will become conveyors.

  or

  ERROR: MapLib:978 - LUT4 symbol
  "window/Thatcher/n_00000036/nSCTL_00000013_00000014/n_000000A3/cOutLoc<23>1.
  (output = window/Thatcher/res000001ed_wi<25>) is an equation that uses
  input pin I2, which no longer has a connected signal. Make sure that all the
  the pins used in the equation for this LUT are signals that are not cut
  (see Section 5 of the report file map for details on which signals were
  adjusted).

  Entire report, you can see in the file report.txt on the attached link.

  I would appreciate if someone could take a look at my problem with simple project and suggest me a solution.

  I'm really stuck with my biggest project which need to have this memory block.

  I'm looking forward to hear from you,

  King looks

  ING. Damir Hamidovic

  Hi all

  I find a sollution to my problem.

  In memory-properties-general-setting up, I changed the block to look up Table memory, and I compile memory.vi and run it successfully.

  I did change as you can see on the picture:

  

  Just, can you tell me is it all "bad properties" and limits the use of this type of memory (Look up Table) of the implementation?

  King looks

• Very grainy Youcam problem after "setting fix advanced dark screen" in dv7

  Hello.

  I have the YouCam came with my computer, which is a HP Pavilion dv7 Notebook PC with Windows 7 Home Premium, Service Pack 1.  Since I got it, I installed all the updates.

  I was JUST able to solve the problem of black screen that many people seem to have by changing my setting with the following fix:

  Go to "improve the current video image"

  Click on "Advanced".

  The value of 'Backlight comp' to '2' (which is max) in the "Video Proc Amp" tab

  Go to the tab "Camera control" and set "Exposure" to "-2" (which is max)

  Click Ok.  Do not hit 'apply '. It will cancel all these settings)<---Most frustrating="" thing="">

  So now, I have a picture.

  The problem that I have now, it is the image I horribly gal AND has a grainy grid pattern on everything.  Other videos of the correction, that didn't happen.

  Sample photo:

  

  Video example (YouTube):

  http://www.YouTube.com/watch?v=aNqMxaiIam0&feature=youtu.be

  BEFORE that, I was able to capture video/images that were fairly normal; No big, but normal HD.

  I want the HD-ness, I should be out a HD product I bought... :/

  HALP!  Thank you in advanced for your magnificence in advance.

  PS: I tried to 'default' everything, too. I had to do the fix to make it work well. I don't know what kind of parameters I maybe changed or not when I was trying to understand the original problem, or if there is a setting I have unintentionally has no 'by default' because I forgot...

  Hello Spennati,

  Try the steps in this link http://goo.gl/Zl7Jx

  Please let me know if it helps.