Problem update the Atheros wifi in my windows vista
I have a Toshiba Sat with Vista. Whenever windows update my atheros gel to start the computer. I had to do a full restore twice in the past week. Can anyone help?
http://www.bleepingcomputer.com/tutorials/tutorial140.html
Understand the Extras in Windows Vista and Windows Update info is at the link above.
Remove the Vista updates; two ways to do this:
1. a System Restore to before the updates:
Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next
If you use Norton, disable it before using the system restore.
If it is impossible to enter the Normal Mode, do a Safe Mode system restore:
Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.
System restore steps according to the info above.
Also:
2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window
> then click the one that you don't want > uninstall will appear at the top > uninstall it.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it
> Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".
When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.
> and if you don't need that an individual > right-click on > UAC prompt > hide it
See you soon.
Mick Murphy - Microsoft partner
Tags: Windows
Similar Questions
-
Problem with the touchpad after upgrade to Windows Vista
After that I've upgraded to windows vista I had problem with the touchpad, that I'm not?
Can U help me!
Maybe when you tell us what model of laptop you have. ;)
-
Can I update the bios with software for windows vista?
I have a HP Pavilion a1747c desktop computer and I need to update BIOS for virtualization technology. However the update the BIOS only supports Windows Vista, and I have Windows 7. Can I still updated it somehow?
Yes, you may be able to extract the actual BIOS file of the installation package compressed and use a flash routine appropriate for flashing BIOS under another operating system, but you do so at your own risk. Any damage to your computer by using this process is at your own risk and you take responsibility for it.
Please send Bravo
-
I have a problem with the transfer of files from Windows Vista to Windows 7.
Original title: transfer files from Vista to Windows 7. Type of processor
I just bought a new computer which has Windows 7. I am trying to transfer the processing of speech and spreadsheets from your old computer to new th but all I can manage is a file of jarbled letters on a program called Word Pad. Can someone tell me if there is a secret code for this?
Windows is NOT equipped with Office installed. You must install your copy of Microsoft Office on the new computer.
And how on EARTH this has nothing to do with Windows 7 security, privacy, and user accounts altogether, I can't see... -
WIFI disabled on windows vista and cannot wireless connect to the net
WIFI disabled on windows vista and cannot wireless connect to the net, but bluetooth wireless Wi - Fi and fine switch is activated. Have a problem with ISATAP #5 who is incapable of solving that can be bound.
All of a sudden I lost my internet connection wireless and I am unable to return. May be because recent windows update. Error messages on the wireless assistant say WLAN offshore or disabled. I have tried every fix.
In device Manager (under network adapters) shows also that MS ISATAP disabled with "Windows cannot load driver (Code 31). When I try to update the driver, "Best driver already installed" appears.
Is there a way to FIX?
http://support.Microsoft.com/kb/932520
Read the above re ignore this error message.
Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.
See you soon.
Mick Murphy - Microsoft partner
-
When I try to open Incredimail I get the message "Incredimail application has stopped working, a problem caused the program will stop working - Windows will close and inform you with a solution ', I have used as my e-mail for several years and never had a problem before Incredimail client. I have gmail for my email. You are able to help with this problem? Thank you, June Fleischmann - my email address is * address email is removed from the privacy *
I suggest to see if there are updates or new versions available for IncrediMail.
If still no luck, I suggest to ask the support of IncrediMail
I hope this helps.
See you soon,.
J
-
Dear Sir I have toshiba l300 notebook now, I had some problems at the start that a time window is error and posted massage window stopped work go on line chek problem and restart when I restart then run ok that's my question ok
Hello
display the appropriate error message.
the error codes?
Try the clean boot procedure to find the application or program causing the problem.
http://support.Microsoft.com/kb/929135
all the best!
Addison
-
Error message indicating the problem with the monitor of devices in Windows XP.
Original title: Device Monitor
Error message indicating the problem with the monitor of devices in windows xp. How to fix?
Hello
1. when exactly you receive this error message?
2. What is the brand and model of your computer?
3. What is the exact error message that you receive?
Please provide us with more information about the issue so that we can provide you with the necessary assistance.
-
Problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200
Am having problem with the areo and transparency in Windows 7 after installation of Nvidia Geforce go 6200
* original title - I'm having a problem *.
You have the latest drivers?
http://www.nvidia.com/page/support.htmlAero - Windows 7 - How to troubleshoot problems with Aero
(1) first of all, click on the Start button and type in Aero. Now, click on find and fix problems with transparency and other Visual effects of link.
(2) a new Wizard dialog box opens. Make sure that you click Advanced to solve all problems automatically.
(3) either the problem will be solved or not. If this isn't the case, you will get a list of items that are potential problems.
(4) If you want to see more details about the problem, you can click View detailed information. This will give you a list of potential problems that have been verified and those that pose problems.
If it does not---> click Start---> right click computer---> click Properties
Click the link for 'Windows performance index' and then click 'rerun the assessment"to refresh your WEI score and try again.
Note: If you have Windows 7 Starter, or if your system does not meet the requirements for Aero you will not be able to use Aero.
-
Problem accessing the program appears downloads view - Windows internet Explorer
I'm using Windows 7 Home Edition on my Lap top, every time I try to get a window in a program through an icon on my desktop, is heading (discover downloads - Windows internet Explorer) how to stop coming all the time when I want to enter a program
Hello
1 are. what program you referring?
2. this happens on all the desktop icons?
3 have there been recent changes to the computer before the show?
I suggest to follow the steps provided and check if it helps.
Method 1: Try to run fix it from the link below:
Difficulty of broken desktop shortcuts and common system maintenance tasks: http://support.microsoft.com/mats/system_maintenance_for_windows/en-us
Method 2: Change default programs using Set Program Access and computer defaults:
http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaultsChanging the programs Windows uses by default: http://windows.microsoft.com/en-US/windows7/Change-which-programs-Windows-uses-by-default
Method 3:
If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.
By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.
How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.
Hope this information is useful.
-
I use LR cc and when I try to use the feature up, I get a message back indicating that "no connection found Upgright". I have not had this problem in the past. IM using Windows 10 and I used a Canon 7 d Mark II with an II Canon 24-70 lens.
It simply means that it cannot find enough information in the image to apply a correction. Have you tried to apply a profile and then using the vertical transformation.
-
Ideas:
- I had problems with google before but everything was OK after uninstalling all programs of google
- Error messages like end of google, but that was before
- I change web browser safari because some time cannot open internet explore it, but so far, I get the message this new update available that it's the same update with the same problems that cannot install
- I use windows vista business 32-bit
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
All,
I suggest that you run repair the automated for: reset Windows Update components and then after restarting your computer, run Windows update and see if it is available again. Also, you should look through this article as well: Troubleshooting Windows Update: updated proposed repeatedly.Let us know the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
R6034 error after installing update KB890830, KB2419640, and KB2478935 for Windows Vista
This message is pop:
Microsoft Visual C++ Runtime library
Runtime error!
Program c:\windows\helppane.exe
R6034
A request made an attempt to load the wrong C runtime library
Please contact the support team of the application for more details
This message appears as soon as the machine restarts
Happens if I try to run Skype
There is no problems until the updates have been installed
This problem is urgent that this computer is used for a company
Thank you
David SchlachterHello
In addition to the suggestion of J W Stuart MVP I ask you to re - install the Microsoft Visual C++ 2008.
Microsoft Visual C++ 2008 SP1 Redistributable Package (x 86) for 32-bit editions of Windows
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=a5c84275-3b97-4ab7-A40D-3802b2af5fc2&displaylang=enMicrosoft Visual C++ 2008 Redistributable Package (x 64) for Windows 63 bit editions
http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=bd2a6171-e2d6-4230-B809-9a8d7548c1b6&displaylang=enThen uninstall and reinstall the software Skype and check.
I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. -
Hi I have a problem with my mouse/pointer when I click on the mouse to open it I have error message unable to connect to the synaptics pointing device. Have you checked the updates that are up-to-date, and the driver is ok, not sure what to try next need to make any changes to the mouse pointer
with Brice thanks.
Hi paiyay,
Thanks for posting in the Microsoft Community.
I understand that you are unable to open the synaptics pointing device in windows vista
· You did changes to the computer before the show?
· What happens when you click the Yes button in the error message?
· You are able to use the mouse on the system?
I suggest you uninstall the software from programs and features and then try to open the properties of the mouse and check if you are able to open the mouse properties then I would you recommend to uninstall the drivers that are installed on the system in the Device Manager and then download the drivers from the link below and check if the problem is resolved.
http://www.Synaptics.com/support/drivers
http://www.Synaptics.com/resources/drivers
Updated a hardware driver that is not working properly
Connect the hard disk, and then try running the fix tool of the article below and check out them.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/I suggest you to contact the mouse manufacturer for assistance. Click on the link below.
See also:
FAQ and troubleshooting
-
Problems with the start time/Display Tune (r) / Vista Business
Dear community of Mic,
I have two problems that slow down my computer.(1) start time:
After my computer starts, it loads quickly in the logon section. However, after I give my login information
the HP computer HP monitor goes black for about two minutes, then the desktop.(2) display tune (r): after the desktop appears, I get an error box saying that "Display Tune (r) failed to load.
I removed Display Tune (r) in the list of programs using the uninmstall tool in Control Panel.
I even deleted display Tuner (r) additional files I found during a search.However, the error of Display Tune (r) appears after every start. Even tried to reload the program, but to no avail.
Any help would be appreciated gratefully.
Thanks in advance.
B.B.
[Moved from comments]
Hello
Thanks for posting the request in the Microsoft community forum!
It seems that the laptop computer goes to black screen after login section and the 'Display Tune (r) failed to load. To get these fixed issue, try the suggestions.You did changes to the computer before the show?
Follow the suggestions listed among the links:
Method 1:
If you have any external device connected to the computer, you can try to unplug the external devices except the keyboard and mouse and check if the problem occurs.Method 2:
Step 1: Try to start in safe mode and check is that the computer goes to black screen.Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
Step 2: If the problem does not occur in safe mode then you can perform a clean boot and check.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Note: After the adventures of shooting set the computer to start as usual by performing step 3 above to the Knowledge Base article.Method 3:
If the problem persists, you can update all divers latest including the BIOS on the manufacturer's Web site and check if it helps.
Note:
BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Please post if the problem persists, we will be happy to help.
Maybe you are looking for
-
What should I do if the pirate iPhone occurred?
Community salvation. I was looking at on Safari yesterday afternoon and I received an alert in red text to talk about a virus threat. I was just expedition through the pages of an apartment, registration, a site that I have often used on my compute
-
Trackpad works not while I use my keyboard
Hi guys I bought my hp laptop yesterday that I use for the games but when I downloaded and started my game, I realized that my trackpad is not working while I use my keyboard. How can I fix? Thank you
-
Windows Update, error 0 x 80190193
Original title: I know that this has been reported several times but every time that I try to update my OS through Microsoft Update I get error: error number: 0 x 80190193. All messages point to the busy servers. Just enough, but everyday all day?
-
looking for a download that will allow me to run a file with a. Extension of the ICA... There's sites but they all want to download their "registry fix" or "speed up your computer" etc.. .i want just the .ica ability... distant help you?
-
No hard drive found during the installation of the OS
OK so I bought this used computer and I will install win 7 64 when it comes to the screen that shows the location of windows installation, nothing indicating no hd inside says no drives found. Click on load a driver to provide a driver for installing