problem using micromax net setter

Similar Questions

• I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and restart

  Mr President, whenever I connect to internet on my laptop using idea NET setter dongle it says the bad pool caller and will restart and reboot... Here is the link to dupmp files https://onedrive.live.com/redir?resid=97d7886e9c3f12c6 mini! 104 & authkey =! AEE9bFVyH3uOKNg & ithint = % 2czip

  Hello

  Bugcheck 1000007E, {ffffffffc0000005, fffff8028a66f060, fffff8801b01b5c8, fffff8801b01ae00}

  WARNING: Unable to verify timestamp for ewusbwwan.sys
  ERROR: Module load completed but symbols can be loaded for ewusbwwan.sys
  Probably caused by: ewusbwwan.sys (ewusbwwan + 2bb5)

  ewusbwwan.sys dated 31/05/2011 driver Huawei Technologies Co.. Your USB dongle driver
  or a device attached to it.

  BugCheck C2, {b, fffff8029f4f8380, 0, fffff8029f4f8b90}

  WARNING: Unable to verify timestamp for c:\windows\system32\drivers\ewusbnet.sys
  ERROR: Module load completed but symbols can be loaded for c:\windows\system32\drivers\ewusbnet.sys
  Probably caused by: c:\windows\system32\drivers\ewusbnet.sys (ewusbnet + 2353)

  c:\windows\system32\drivers\ewusbnet.sys Ditto pilot.

  This driver update.

  Resolution of the blue screen in Windows 8/8.1 errors
  http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors

  ========================================================

  Check with HP Support, their drivers and documentation online and ask in their forums
  on known problems. Updated BIOS, drivers of low level chipset and on-board major
  and drivers of separate devices (see methods of updating driver below).

  BiosVersion = F.03
  BiosReleaseDate = 07/09/2012
  SystemManufacturer = Hewlett-Packard
  SystemProductName = PC HP Pavilion Sleekbook 14
  Family = 103C_5335KV G = N L = CON B = HP S = PAV X = Null
  SystemVersion = 087F1000003B5900000310100
  SystemSKU = C0P30PA #ACJ
  BaseBoardManufacturer = Hewlett-Packard
  BaseBoardProduct = 18F9
  BaseBoardVersion = 82,12

  HP support/troubleshooting & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  -----------------------------------------------------------------------------------------------------

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded: run DriverView - set the VIEW to hide
  Microsoft drivers - update those without drain in their names. (Also update BIOS and)
  low level chipset drivers.)

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now click on
  Driver update (this can do nothing as MS is far behind the certification of drivers) - then right
  Click on - uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Windows 8/8.1 - hardware and drivers
  http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8

  Windows 8/8.1 - Why Windows is not find my device?
  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  Windows 8/8.1 - what happens if a device is not installed correctly
  http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly

  ----------------------------------------------------------------------------------------

  Tests of memory intercept all errors such as memory do not match (possible even for sticks
  seemingly identical) and when the faster memory is placed in system behind the slower memory.
  So it is best to Exchange also sticks in and out to check for those, even if all the tests of memory do not
  show a problem.

  To test the RAM here control - run 4 + hours or so.<-- best="">
  www.memtest.org

  For the Windows Memory Diagnostic tool.

  WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
  list - and follow the prompts.

  How to run the tool in Windows 7 Memory Diagnostics (and 8/8.1) - in Windows 8 8.1
  the name is "Windows Memory Diagnostic".
  http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html

  ======================================================

  After doing ALL the updates you can and if the problem persists, run DriverVerifier.
  (Remember to use the methods Windows 8 posted at the top of the first answer above).

  Driver Verifier can help find some BSOD problems:

  Using Driver Verifier to identify issues with Windows drivers for users advanced
  http://support.Microsoft.com/kb/244617

  How to solve the problems of driver in Windows Vista or 7.
  http://www.WinVistaClub.com/T79.html

  Using Driver Verifier
  http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspx

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  Driver Verifier
  http://www.techsupportforum.com/2110308-POST3.html

  Using Driver Verifier
  http://www.faultwire.com/solutions/using_driver_verifier.php

  How to use Windows drivers check Manager to solve problems and identify the Driver questions
  http://www.YouTube.com/watch?v=_VwIDD9xngM

  You can disable the driver verifier
  http://support.Microsoft.com/kb/244617

  WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable

  BlueScreenView lets you know if there is a driver specified in the error message. Also check with
  MyEventViewer at the blue screen.

  If DriverVerifier creates a minidump upload it and post the link here so we can analyze.

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Problem using item to set flash chart custom colors

  Hello
  
  I just find that in apex.oracle.com I can't change graphic more if I add the article to custom color table attributes as & Px_MY_ITEM.
  Page works ok, can I change this definition of region of graph and other page elements. Example here
  http://Apex.Oracle.com/pls/OTN/f?p=44795:18
  
  What I did:
  I create hidden item & P18_COLOR and calculation to set the value for him
  #000000, FFFF00 #, #CC9966, #FF0000, #FFCCCC, #CCCCCC
  
  Can I edit table attributes and select the 'Custom' color and place & P18_COLOR game. for custom colors.
  I press on apply changes and execution page everything is ok.
  
  But if I try to change attributes of table again I still have error
  ORA-20001: go get the error ORA-01403: no data found
  Failed to retrieve the data.
  
  This same phenomenon produces all instances where I try to this Summit 3.2.1.00.12 running. I'm not even occur older versions or Apex 4.0.
  
  Could someone Apex Team check this?
  
  Thanks
  
  BR, Jari

  Hi Jari,

  I did a new install of APEX 3.2.1 just to check the behavior in our previous versions, and as I suspected, making reference to a page element in the text box custom page attributes of table colors should not and so will result by the ORA-01403: no data found error. As you say, and as I myself have confirmed, you will get the same behavior with APEX 4.0. We can certainly look to address them in a future release, but for now, referencing a page element in the color text box custom is not fully supported and that colors apply the generated table, then will prevent you from additional modifications to the table. I'll add this as an improvement in our next release.

  Kind regards
  Hilary

• IDEA NET SETTER PROBLEM

  I have a setter net idea which works perfectly on my desktop, but does not work on my dell lappy. Two of them have win 7 on which is installed. my lappy recognized net setter n it is also installed, but when I click on connect, it gives the error 4.

  What should I do? Please help.

  AG

  I suggest that you contact the manufacturer, as they are experts with their software/hardware.

• Q re: test a Config name except. using Oracle Net Configuration Assistant

  Hello
  
  I use Oracle Net Configuration Assistant to test connectivity to a service name.
  
  If I specify the username SCOTT and password valid, the test completes successfully, however, if I do the same test with user defined as 'sys as sysdba' name and his password, I get the message "ORA01017: name of user and password invalid; connection refused '.
  
  If I use the same credentials using SQL * Plus, I can connect without any problems.
  
  Question: Why am I not able to test connectivity to ONCA using "sys as sysdba" as well as his password?
  
  Thank you for your help,
  
  John.

  John,

  I believe that when you give, 'sys as sysdba', this set is treated as a "username" which is not really. This is why the error is generated for you. If you would like to try just give Sys, you'd see he comes back with an error connection sys must use clause "as sysdba. Then fate of a kind of the story chicken egg. The netca text box has the possibility to enter the credentials of the user as user Sys OMI.

  HTH
  Aman...

• Can I use two vpn set in my iPhone?

  Can I use two vpn set in my iPhone?

  Yes, you can use but not at the same time. You can add more than one vpn on your iPhone but can only use one at a time. Another way to use the two VPN at the same time, is that you can have an extra router to connect the two VPN at the same time. For more information on this, you can take a look at these answers https://www.quora.com/Why-cant-I-use-two-VPN-at-the-same-time hope this will solve your problem to his subject.

• unknown problem using WMP 12 no sound when played the song in the folder but has sound when he played in the player

  Hi all

  I have a weird problem using WMP (Windows Media Player v12).  When I double-click a song of in my library, the trail seems to play, but didn't have all the sounds.

  However, if I hover over the same path and then click Preview, the pop-up, the track plays with sound.

  When the track (s) do not play, all indications show the way to correctly play through of progress ' Now Playing ' screen, but no sound.

  In the past, when I clicked on any MP3 file, he would play using WMP.  Now, when I click on an MP3 file, it brings just "Now Playing" and looks LIKE he plays, but no sound.

  I have looked & looked for clues as to why it may be of WMP, but I can't understand the problem.  I also searched the Web for 'day' drivers in the Win System Manager, but Win says that pilots are "up to date".

  I have rebuilt the DB Library (twice) by removing the DB files in from WMP to a procedure in a WMP support forum. I also went to check the audio device in Device Mgr Win (mine is one on one). Everything seemed ok.  I also changed the devices to "Win by default" to what I think my onboard audio device is called.  I thought that that can do, but it's not.

  I was struggling with this since the day of the year.  Please help me solve this problem!

  Here is a link to my system features:

  http://Speccy.Piriform.com/results/0JAQshtlODwFxgwHeGb4rfq

  Hi, Pie,

  Welcome to the Microsoft community.

  Appreciate your efforts to try to resolve the problem that you have set so far. I guess that is not a problem with the driver that ultimately, the songs are playable using the media player. It could be a corrupted in Windows Media Player framework that is causing the problem. Let's run the Windows Media Player troubleshooting utility that resets all parameters to the player. Check out the link to do so:

  http://Windows.Microsoft.com/en-za/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Please let us know the results.

• Using the same set processing on several site to site VPN tunnels

  Hi all. I have a rather strange situation about site-to-site VPN tunnel.

  On the one hand, I have a PIX 501 and on the other end an ASA5505 and a tunnel set up between them.

  The problem is that on the side of the PIX, I can't establish a tunnel, but when the traffic starts on the side of the ASA the tunnel established as usual.

  I checked the configurations on both ends and keys, passwords, mirror that LCD seems OK. The only thing that comes to my attention, it's that I have the same set of transformation used for 2 different tunnel on the side of PIX.

  Can I use the same set of transformation on several tunnels or should I set a different transformation for each tunnel? Could be the source of the problem?

  Use it on PIX

  card crypto set pfs group2

  Or on ASA, use:

  card crypto set pfs Group1

• Compaq Evo D5pM - problems using this model number, never find what he listed...

  Compaq Evo D5pM - (Pent4 - 1.7 GHz) problems using this model looking for parts or information number.  Serial number has not been useful.

  Someone said "aka Compaq D510." Trying to buy memory model (found on the case) my number wasn't so I tried to use D510 (it was listed). Apparently not the same computer / mine use 168 pins sticks and D - 510 came 188 pins. I did my 'upgrade' purchase by check the number of pins and using the already installed type.

  My computer is a vertical minitower - looks like D - 510-, but like I said the components are different.

  I was wondering if anyone knows a model Compaq Evo w / same components (P4 1.7 GHz; 168 pin memory) I could use for research purposes. The smallest horizontal model Evo often uses different (smaller) maps, etc..

  Tried the Ctrl-Alt-S keyboard shortcut to bring up the model number (etc.), but my keyboard shortcuts do not work on this computer. Run a search for edge came up with nothing to tune.

  I tried HP support and drivers.  With the help of several model numbers and found that absolutely nothing for HP Compaq or "Compaq" is in the list.

  It is a great 3rd computer that I've updated w / spare parts, use it remotely, especially for music. Only problem was the dark model number. If anyone has something useful to add would be most appreciated. Thanks in advance...

  PS I'm currently trying to identify MB for what it's worth, but a number of alternative model that works would be great.

  Hello:

  Your model is a d500 CMT HP.

  1 GB 128 x 64-133 MHz PC133, 168P DIMM, 3.3V, sync

  Type of memory: , (non - ECC)
  Maximum memory: 3 GB
  Slots: 3

  This is the page for support and drivers for your PC.

  http://h20566.www2.HP.com/portal/site/hpsc/public/PSI/home/?cc=us & lang = in & sp4ts. OID = 96294 & Task = & AC.admitted = 1389381517647.876444892.199480143

  QuickSpecs:

  http://h18000.www1.HP.com/products/QuickSpecs/productbulletin.html#spectype=North_America & type = HTML & docid = 10946

  Because nobody does more than the memory, it will be hard to find and very expensive.

  You can plan on paying more $ $70 / 1 GB chip if you do not find the specification above used on a place like eBay.

  You can buy a newer, faster CMT from HP on eBay for less than $70 delivered.  Memory is much cheaper to buy as well.

  http://www.eBay.com/ITM/HP-DC7600-Pentium-4-3-0GHz-40Gb-512MB-DVDRW-XPPRO-30-day-warranty-/281231108334?PT=Desktop_PCs & Hash = item417aae28ee

• I have problems using the parental control. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  I have problems using parental controls. I want to block facebook from a user account. I have facebook in the ban list, but apparently not block. I have Vista. What should I do to block facebook?

  Have you followed all the steps like that?

  http://www.howtogeek.com/HOWTO/Windows-Vista/use-parental-controls-to-filter-websites-in-Windows-Vista/

  It is an alternative.

  http://explore.live.com/Windows-Live-Family-Safety?OS=other

  http://Windows.Microsoft.com/en-us/Windows-Vista/protecting-your-kids-with-family-safety

  If this post answers your question, click mark as answer .

• problems using the snap have amd, playback of Jpeg files

  Original title: I'm having problems using the component feature snap-in.

  Sometimes a single document disappears. When this happens while the document program is managed by then will not work. The document seems to be flying around the office. The last time this happened I had a doc JPEG upward and now I can't see what is JPEG. I don't know why the document wants to fly around, and I don't know how to get my use of the JPEG back.

  Hey Graham,.

  To view all jpeg images in the Viewer Windows photo or any other photo software visualization, you must configure this software as a default value in the default programs.

  Check out the link that allows you to configure the program as default.

  http://Windows.Microsoft.com/en-in/Windows7/change-which-programs-Windows-uses-by-default

  You can try to run the Aero Troubleshooter and see if that makes a difference.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  If the problem persists, provide us newspapers observer of events, as well as the error message if you receive a message.

  http://Windows.Microsoft.com/en-in/Windows7/open-Event-Viewer

• Using dot net 3.5 in windows 8 pro

  How can I use dot net 3.5 in windows 8 pro please suggest

  See:

  How to install .NET Framework 3.5 in Windows 8 or 8.1?

• I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I had created a slideshow of practice and the background image was not displayed as an image in itself. How to

  I'm having a problem using the slideshow module in LR 6.3. The slideshow contains the background image as one of the images to display. Earlier, I have created a slideshow of practice and the background image was not displayed as an image in itself. How to make it behave?

  Another approach, perhaps a little more elegant (?). Create a collection that includes images for the slideshow. Include the background image in the collection. Drag the background image in the Panel to designate. Then, remove this image from the collection and create the slide show. I just tried and it works, too.

• Problem using the REST API by wavemaker

  Hello

  I have a problem using other api with wavemaker. When I do a query GET with the RESTClientin FireFox, everything is fine for example:

  get https://XXX.XXX.XXX.XXX:8281 / vco/api/result:
  

  
  Status Code: 200 OK
  Cache-Control: private
  Content-Type: application/xhtml+xml;charset=UTF-8
  Date: Sun, 06 Apr 2014 16:50:04 GMT
  Expires: Thu, 01 Jan 1970 00:00:00 UTC
  Server: Apache-Coyote/1.1
  Transfer-Encoding: chunked
  

  But when I try to connect to the same url using wavemaker I recive: the answer is not in a valid XML Format.

  I use Orchestrator 5.5 and far as I could see the token is no longer required in the header. Anyone know why I get this error message?

  Thank you!

  

  Well half a day looking, then finally I thought to it:

  The header should be: accept: application/xml

• Are there problems using Adobe CC with 10 Windows?

  Are there problems using Adobe CC with 10 Windows?

  Hi Michael,

  This might be useful: https://helpx.adobe.com/creative-cloud/kb/Windows_10_compatibility_FAQ.html

  Kind regards

  Sheena