Problem VLAN HP Mini 110-4101er
Hello. We have a level 2 + switch with VLAN. This netbook is unable to obtain an IP address from the DHCP server. Parameters default network has been applied. The same thing with another HP laptop with the same NIC Realtek. But another Acer netbook works fine on the same switch port. We do not know why.
Any help would be appreciated.
The problem is resolved. Had to download the new drivers and the utility of diagnosis on the Realtek site. With the help of the utility put in place of VLAN ID 0. Everything works fine.
Tags: Notebooks
Similar Questions
-
WLAN Driver XP problem on HP Mini 110 3504TU
Hi all
I have a problem with WLAN driver Windows XP for this Netbook HP Mini 110 3504TU
"Network controller"?
Hardware ID:
PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C & REV_01
PCI\VEN_14E4 & DEV_4727 & SUBSYS_1483103C
PCI\VEN_14E4 & DEV_4727 & CC_028000
PCI\VEN_14E4 & DEV_4727 & CC_0280Product number: XV876PA #UUF
SN: {information}
My Google search results: WiFi chipset is Broadcom. I tried ALL my links (link to the official driver HP) google search result, but just not getting anything,
I tried anyway install all drivers (search for my googling) downloaded files
the way normal installation sequence and manual, via the "Update driver" Menu on Device Manager
but no anymatches found.
Thanks in advance before...
Kind regards
Dave. N
Hi, Dave:
This driver should work.
-
problem of HP mini 110 1013tu bios password.
Hello
Please help me... i have a hp mini 110-1013tu running on windows xp exact model CNU9220NDZ S/N with P/N VB703PA #UUF... It comes to update correctly the version of the bios using the hp mini 110 1013 computer you model. It works for a week but when I opened again, to start HP logo turns sign Q... .i tried to remove the CMOS/RTC to reset, but when I turned it on again there is already a password and I can not go into the bios setting to change the clock... I can't chose startup option too because of the password. Please help me on my Hp Mini 110 1013tu
SN: [edited by moderator on 18-08-14]
Thank you
Try cyber.
e9lo1q362d
Third letter lowercase l.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
Problem of HP Mini 110-355 after installing win xp
Hi every1!
hope someone could help me soon...
I have 110-3500 mini hp win 7 (bones included) I have a mini internet shop
I was able to install win xp (on USB) on my loptop since some of my necessary habit of the software work on win 7.
but the problems are.
(1) optical mouse usb does not work! He says: "cannot install, peripheral is dsabled" he keeps saying it, even after activation of the device said on Device Manager and the Device Manager, under HID class, there is an unknown device:
and: (2) my wifi and and bluetooth does not work (the two are also in the same switch)
I downloaded and installed any necessary drivers form net but only that both do not work.
hope to hear any response soon... thank you so mch...
Hello:
Please see if the chipset driver helps with this unknown device.
I don't know why your network cards do not work if you have the drivers installed for them.
Try the latest driver for network card for XP...
Try this driver package and the bluetooth software...
Paul
-
Re: enter the current password HP Mini 110
The same problem. HP mini 110
Help me
cnu9376kqf
Hello:
Restart and try:
e9lofxgs58
-
HP compaq mini 110 mod110-1120ss cnu9373tk0 of bios password
Hola tengo a problema con compaq mini 110 y he probado 30 password DD mas me can help
Try to Anton.
e9lofxfas1
Third letter lowercase l.
REO
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damages that may occur to your system using these services. Please be aware that you do so at your own risk.
-
HP mini 110 ethernet controller problem
Hello I have a HP mini 110, the problem is that my ethernet driver is not install! I'm on windows XP service pack 3, 32-bit. I TRIED INSTALLING THE DRIVERS LISTED ON YOUR SITE BUT IT SAYS AFTER INSTALLATION "CONTROLLER REALTEK M\THE IS NOT FOUND."
my device remote ID is "PCI/VEN_1969 & DEV_1062 & SUBSYS_308F103C & RV_C0\4 & 23C6FC68 & 0 & 00E1"
Here is the driver for your network card.
The device is an Atheros AR8132 PCI - E Fast Ethernet Controller
-
I HAVE COMPAQ MINI 110 HAVE A PROBLEM WITH THE PASSWORD OF PIOS.
SYSTEM HAULT CODE IS; CNU9243TDY
ways to help
Hello
Try to enter: e9lo7vfati (3rd character is a lowercase L)
Kind regards
DP - K
-
HP Mini 110: Enter current password problem.
Hi guys, it seems I have the same problem as many others, hp Mini 110 wonder password enter CURRENT: but I have no idea what it is, it seems people have had a response, somone could help me too please?
The error code is: CNU94116TX
Thanks a lot to advence
Steve
E9lov33ga4 enter: (note that in both cases, the 3rd is a lowercase L)
or
e9lov33garKind regards
DP - K
-
Compaq mini 110: problem of password bios compaq mini 110
I have compaq mini 110 .my problem bios password is not
the messsage CNU9249P6X screen?
WHAT İS THE BİOS PASSWORD? HELP ME THANKS
Hello
Enter: e9lo7vo2g4 (to be noted that in both cases, the 3rd character is a lowercase L)
or
e9lo7vo2grKind regards
DP - K
-
HP Mini 110-3610se recovery Partition problem
Dear HP technical team
Hello. I have a mini laptop ' hp mini 110-3610se "and when I try to create a new partition in the c drive, I get an error and I can not do so get help from software"paragon partition manager"and I change my recovery to the logic partition and then do some activity by this soft ware and after restart my computer windows cannot start and I can not too F11 recovery and now I don't have windows and I don't have any recovery tools and system cannot work by recovery option.
I know that my windows partition not damaged because I change it and I work on the recovery partition but my widows will not start.
now, I can not access the hp suppurt group, please help and tell me what I can do?
Make a Paragon partition manager boot disk, boot from it and undo the changes to the partition.
or try this
Use F8 to the beginning of the power up when you see the HP splash screen, that you get the advanced screen, select 'repair your computer' and press ENTER, once that loads of Windows recovery environment, select 'repair your computer' once again, if you get a dialog box on it to find problems and you want to repair say no.
Once you get to the screen tools select Startup Repair, see if he can repair windows startup, restart when it is done, see if it will load windows now.
-
HP Mini 110-3600 sd screen problem
Hi all
I have a problem with the screen of my HP Mini 110-3600 sd (product code LD078EA #ABH). Yesterday morning all of a sudden it became too small for the content, which means that the bottom was not visible (for example windows, I use windows 7 starter edition). To be clear, that the full screen doesn't work, if I maximize the view, it's actually too short. The night before, it was working fine and I did not install anything until I turned it off.
I tried to install the new drivers and using the different resolution but nothing seems to work. What I find strange is that when I look at op the specs of this laptop it says it works at 1024 x 600, but the pc is recommended to run in 1024 x 768 60 Hz. (The screen has never been replaced) The laptop seems to be confused about her size and position, if I chose a resolution '1024 x 600' and 'centre screen' it looks like the screen space, but he put a black in the top column, so that in the end, she always falls short. And, although I'm not sure about this, I thought the laptop used to support a higher resolution, before this problem (1360 x 768 perhaps?).
Below, I've included a story on the monitor (or pilot), if more info is needed I would bring him a pleasure (but I'm not experienced enough to know what you guys should be now).
Intel(r) Graphics Media Accelerator Driver for Mobile report
Report date: 31/08/2013
Report time [hr:mm:ss]: 16:18:43
Driver version: 8.14.10.2230
Operating system: Windows 7 Starter *, Service Pack 1 (6.1.7601)
Default language: Dutch
DirectX version *: 11.0
Physical memory: 1011 MB
Minimum graphics memory: 8 MB
Maximum graphics memory: 249 MB
Used graphics memory: 93 MB
Processor: x 86 family 6 Model 28 Stepping 10
Processor speed: 1662 MHZ
Vendor ID: 8086
Device ID: A011
Review of the unit: 00* Accelerator information *.
Accelerator in use: Intel (r) Graphics Media Accelerator 3150
Video BIOS: 2036.0
Graph current mode: 1024 x 768 True Color (60 Hz)* The devices connected to the graphics accelerator *.
Active screens: 1
* Laptop *.
Name of the monitor: digital LCD-scherm (1024 x 768 60 Hz)
Display type: digital
Gamma value: 3.54
DDC2 Protocol: support
Maximum Image size: Horizontal: not available
Vertical: Not available
Watch taken Modes supported:
1024 x 768 (60 Hz)
Display Power Management Support:
Standby mode: not supported
Standby mode: not supported
Active off the coast of the Mode: supported
Raw EDID:
00 ff ff ff ff ff ff 00 36 03 00 03 00 00 00 7f
2f of ff 0c 01 03 80 00 00 00 00 a0 00 57 49 9 b 26
10 4f 48 00 00 00 01 01 01 01 01 01 01 01 01 01
01 01 01 01 01 01 64 19 00 40 41 00 26 30 18 88
36 00 00 00 00 00 00 18 00 00 00 00 00 3 c 00 fd
EB 07 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 68* Other names and brands are the property of their respective owners.
I really hope you can help me, because I am abroad and need the laptop to support my study.
Thank you
I see. Thanks for letting me know that. I see some other posts on this thread that mention check video cable as it passes through the hinges. It is a common problem for all laptop computers with cables video/camera/wireless antenna through the hinges.
Here's your Guide to Service and Maintenance. Display Assembly removal starts on page 61.
-
Problem updating Mini 110-3500 2 GB RAM
A few days ago, I bought a HP Mini 110-3500 netbook (more precisely a 110-3538TU / LD928PA) and separately, I bought an upgrade to 2 gigabytes of RAM to another bank. So far I had been focused on the problems of screen resolution but tonight, I finally installed the RAM, but the machine could not be started. I tried three times and he has always worked with the original 1gig but never with the upgrade to 2 giga.
In the store, I noticed that the display Mini 110 used RAM Kingston, so I took care to buy the same brand. I turn the machine on, I brought was not Kingston but RAM Samsung. I have included a picture of two RAM sticks.
Is - this Mini 110 module is known to work only with certain brands of RAM? I have somehow the wrong type of RAM? I have to change something in the computer so that it can recognize the extra RAM? Is there a brand recommended RAM should I buy instead?
Unfortunately, I didn't get to try the Kingston RAM on another machine. I tried all my local chain computer stores and MOM & dad computer Chinese import stores and the only other brand available was "Amicroe" resembling a brand generic cheapo, perhaps re-marked. Normal price was AUD $119,96 but Harvey Norman gave me for $60, $5 more that I had paid for the Kingston RAM. I was skeptical, but it was working good in weeks.
-
HP mini 110: Hp Mini 110-1115CA password problem
I have a Hp Mini 110-1115CA and I can't remember my password. I have three attempts to enter the password and after the third incorrect attempt, I get this message:
Password check failed
Fatal error... System stopped
CNU94314TL
Do you know how to fix this? I have my files in my laptop so I need to open it... It is important...
hope you can help me...
Hello
Use the code to reset below
e9lovf3vak (3rd letter is L)
Or generate code for reset from the link below
- Use the posted above unlock code to access the BIOS
- Disable all passwords that are enabled
- If current password request - type the unlock code
- New password, simply press the ENTER key
- Repeat the same thing to check the password column.
- Then exit the BIOS saving & exit option to save the changes.
-
Compaq mini 110 c-1010et: password Bios Compaq Mini 110 c problem
Hello. Ask the BIOS password and I do not know the password. Please help me. Model is compaq mini 110 c-1010et and series is [personal information deleted]. Thank you for everything.
Jimmy
Try: e9lof1f9u9
all are lowercase letters
third letter is small case L
fourth letter is small case O
is the sixth number oneConcerning
Visruth
Maybe you are looking for
-
I am running Mozilla Firefox under Windows 7 Ultimate 20.0.1.I'm trying to import favorites from Internet Explorer 9.0.15.If the bookmark has a subdirectory, I don't get any of the links in the subdirectory. It didn't happen on my other computers:Int
-
Hello Remove all the computers - this is no longer available under iTunes of El Capitan? If not, how can I do? Thank you.
-
I am a novice in Expression Web and WYSIWYG does not work
I work in a hotel last month and do not know if this is the problem. What I write will come out with missing and wide. The page is WWW.NEWBID.NET. It is full and tight, but the browser displays the lines missing and large gaps. All thoughts, Lou
-
Hello I just bought (3 days) a computer hp laptop with 64 bit pavelion window of nehruplace Delhi-India. I'm not able to install some of my software are supported only 32-bit. My softweres worked well perfactly on windows xp. what I now want to get a
-
How can I check the internet connection?
How can I check the internet connection after the launching application? Method or property with the value true or false. Thank you!