Problem when I E of COMMAND of CC in Lightroom to Photoshop CC

Similar Questions

• I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Hello

  I am a member of the creative cloud.  I had hard drive problems.  How can I go on redownloading cc lightroom and photoshop

  Refer

  Using creative cloud | Download, install, update or uninstall applications

• Problem when I try to update my version of lightroom 6.0 to 6.1 on my mac?

  When I check the version it tells me that I am aware, but adobe has released yesterday a 6.0.1 and version 6.1 and I can't update?

  I would appreciate a little help ;-)

  See you soon

  Phil

  Webman06,

  Have you tried the menu in Lightroom: help > updates?

  You can also try to uninstall Lightroom 6 then put it back.

  Did you get the error codes when you try to update? If so, please also see this link:

  Do not install updates | Failure to update or U44M errors

  Guinot

• When to go from Lightroom to Photoshop

  Hello

  I searched the forum and not quite found the exact answer, but I confess, I'm new here so sorry if this is old news.

  So, I'm working on my photos in lightroom (do the majority of the edition) and occasionally in Photoshop (fluidity and more nuanced and powerful healing and fading of shit).

  My question is: when if the best time to go from Lightroom to Photoshop?  First option: before making changes to lightroom, go into photoshop and make the changes, then apply changes to lightroom to the new tiff file?  Option two: when any changes in Lightroom are fully completed, then send to Photoshop and edit (realizing that once I go to Photoshop, I'm no longer by changing the RAW file, but now to edit the Photoshop tiff file) Option three: anytime?

  Are there other options I think not?

  Thank you

  Jerm

  I think you do as much editing in Lightroom as possible, and only then you go to Photoshop for editing you need which is not possible in Lightroom.

  Of course, you could go to Photoshop when you want to, but there is little benefit unless you have done as much as you can in Lightroom and still have editing capability that has only Photoshop.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Faced with problems when running CPC and CPA Imort commands

  Hello
  I am facing problems when executing the commnads CPP and CPA from command line to import a file of CPA. I followed a Blog through "b2bGurus", but the third step is not clear. As for what should be OK step 3.
  It will be a great help if someone can explain as well as the exact command to texts needs.
  I'll also send the link I followed orders "http://www.b2bgurus.com/2008/11/cppcpa-feature-in-ebms.html".
  In this bolg followed the steps as "how to the PRC and the import of the CPA."
  
  Kindly help as this is urgent.
  
  
  
  Thank you and best regards,
  Kunal Banerjee

  Hi Kunal,

  Its a typing mistake, please try

  Of $ORACLE_HOME/ip/tutorial and run below command
  Java oracle.tip.adapter.b2b.utility.EBMSUtility cppcpa.properties

  Concerning
  Nandagopal.S

• I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).

  network adapter AutoDetect fails

  Hello:

  I installed in my laptop XP - SP3 PersonalFirewall of Privacyware and I have this problem: when restarting, always internet access isn't available (WiFi/LAN).
  Using the command ipconfig, I found that these cards are not detected. (Although without wireless/LAN icons do not display the modem connection). Also, if I go into Device Manager, I see network cards. BUT if I select "research material changes", then the other adapters will appear (those of Privacyware) and internet connection is reset and it will work then.  I wonder why windows does not detect this kind of cards automatically when I start it.

  This problem occurs only in my laptop - I installed the project Feederwatch on a laptop another XP and it worked, so Privacyware cannot provide a solution, since seems a very specific problem.

  Thanks for any idea!

  Seems that the solution was:

  1 - Open Device manager and view the hidden devices.
  2. then go into not connectable & play devices and manually delete all the remainers network software & security uninstalled (process antivirus, firewall, monitor).
  3. several reboots were required in order to know if the garbage problem has been removed.

• When I use the command tools Auto in PS6 Layer turns white?

  When I use the command tools Auto - auto tone, contrast, or color - in PS6 BG layer to become white?

  Try resetting all the Photoshop tools. If that does not resolve the problem, try resetting your Photoshop Preferences in Photoshop preferences

• problem creating oscustomisationspec from the command line

  Hello

  I have a problem when you create or modify a command line oscustomisationspec

  If I change the administrator password or domain password I have a problem when you use the customisationspec

  error is cannot decrypt the password

  the public key in the specification does not match the public key of vcenter...

  When I create this oscustomisationspec of my xp machine I have no problem

  When I create my Management Server I have the problem

  and when I create it from the vcenter itself I have the question too

  I don't understand why I'm using the right button of my computer and not a server

  If I create the customspec of the client vsphere vcenter or on the management server, it works well

  Another thing

  If I export customization of my computer the plain text for the password value is false

  If I export the customization of the server the value of plaintexst is true

  my machine is xp

  the waiters are win2003 and win2008

  can anyone help?

  Hello, DanielSoares-

  This could be linked to the bug referenced in the thread to the http://communities.vmware.com/thread/297748.  Here, broedi and vitalibaruh done by are the property of plain text for passwords in the spec is set to $false instead of $true when.  They discuss this issue when using New-OSCustomizationSpec to clone an OSCustomizationSpec, but I got the same behavior you describe when you create a new persistent by using New-OSCustomizationSpecOSCustomizationSpec.

  In the thread (the post to http://communities.vmware.com/thread/297748?start=18), vitalibaruh (from the team of PowerCLI) mentions that he's filed a bug for this behavior.

  So for now, the solution seems to be to create the OSCustomzationSpec via the vSphere client and, if you want to work with a copy of the spec (to add/modify credentials, for example), use the API to clone the spec (via the DuplicateCustomizationSpec() method) and then use Set-OSCustomizationSpec to make changes to the clone.  I've posted an excerpt on the use of this method twice in this same thread.

  Is not ideal, but that market.  I hope this helps.

• Problem when running server SOA

  Hi, I'm looking for from the SOA server. I started successfully to Server Admin, but I'm having problems when starting Server SOA. When I'm doing that I get many errors, follow three last lines in the console:
  
  12 characters do not match "Expressions of folklore <>" expected "" "
  TForm is running and is accepting applications
  12 characters do not match "Expressions of folklore <>" expected "" "
  
  When I am trying to start SOA server administration console (settings soa_server1-> control-> check soa_server1-> Start/Stop, then click Start) I get: string received certificate of localhost127.0.0.1 - has no control of verification of hostname. Pawe certificate?-Komputer but check should localhost
  
  Could you help me? If I'm going to write more information.
  
  Thanks in advance
  
  Edited by: 948093 2012-07-23 06:07

  Hello

  It seems that when you call after a command.

  startManagedWebLogic soa_server1 'http://127.0.0.1:7001 '.

  try this way.

  soa_server1 startManagedWebLogic.sh T3: / / :

  Make sure you gave Admin Server port or not.

  Check your config file to check the port and IP address or correct.

  Kind regards
  Kal

• Have a problem when installing packages Asmlib

  Hi all
  
  I have a problem when installing packages ASMlib.
  
  My OS = Redhat linux 5.3
  kenel version using this command uname - r = 2.6.18 - 128.el5
  
  I downloaded the package and installed successfully after 4
  
  oracleasm-support - 2.1.7 - 1.el5.i386.rpm
  oracleasmlib - 2.0.4 - 1.el5.i386.rpm
  oracleasm - 2.6.18 - 128.el5 - 2.0.5 - 1.el5.i686.rpm
  oracleasm-2.6.18-128.EL5-DebugInfo-2.0.5-1.EL5.i686.rpm
  
  But while the installation following received the error
  
  RPM - ivh oracleasm - 2.6.18 - 128.el5debug - 2.0.5 - 1.el5.i686.rpm
  
  kernel debugging = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5debug - 2.0.5 - 1.el5.i686
  
  RPM - ivh oracleasm - 2.6.18 - 128.el5PAE - 2.0.5 - 1.el5.i686.rpm
  
  kernel-PAE = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5PAE - 2.0.5 - 1.el5.i686
  
  RPM - ivh oracleasm - 2.6.18 - 128.el5xen - 2.0.5 - 1.el5.i686.rpm
  
  kernel-xen = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5xen - 2.0.5 - 1.el5.i686
  
  Thanks in advance

  xuv500 wrote:
  kernel debugging = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5debug - 2.0.5 - 1.el5.i686
  kernel-PAE = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5PAE - 2.0.5 - 1.el5.i686
  kernel-xen = 2.6.18 - 128.el5 is necessary for oracleasm - 2.6.18 - 128.el5xen - 2.0.5 - 1.el5.i686

  Then install the packages. You can find them on installtion DVD

• Start up problem when having multiple databases on the machine

  Start up problem when having multiple databases on the machine:
  
  I installed two databases.
  
  When I stop the database and try to start using
  
  Startup pfile ='... location... " ;
  
  I get ora-12514: TNS: listener is not currently know of service rquirest in connect descriptor
  
  When I try again after 3 seconds, I get a new error, ora-01041: internal error. Hostdef extension doesn't exist
  
  Stop and start gave no problems when I had a database. Why I get problems when I have two databases?
  
  I use: show the pfile parameter. SPFile; to make sure that I have the right parameter locations, the error should not be the location.
  
  I never installed two databases on a single machine, then perhaps that I make mistake of a first - timer.
  
  Anyone know how to get this working, i.e. start and stop DB without problems?
  
  The oracle 11 GR 2 on Windows 7 64 bit, everything works normally.
  
  Thank you
  Ayman
  
  Published by: aymanzone on June 15, 2011 09:27

  aymanzone wrote:
  My oracle_sid is set to the name of one of my databases

  echo % oracle_sid %

  shows me the name of my first database.

  Still does not.

  When I start the services of two databases by using Services, I can connect and run queries both the database.

  Published by: aymanzone on June 15, 2011 11:47

  First of all... the Oracle Service for the instance must be started for the DB that you try to connect or start.
  Next... from the command prompt:

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Now, if you want to start or connect to another DB, which is on the same server (again assuming that the Service is STARTED)...
  From the same command prompt or other session...

  Set oracle_sid =

  sqlplus sys as sysdba

  Startup pfile = 'location of the pfile respective db.

  Published by: Srikanth on June 16, 2011 12:27 AM

• PROBLEM when scanning multi-page pdf

  Hello

  Since the update of the sierra, I have a problem when scanning multiple page document. If I check the checkbox "merge pdf" in the scanner window, first page works fine but when I scan page #2 or one of the more page don't merge in the file pdf which flashes briefly in the sidebar, but still with only one page...

  I tried with another scanner (diff brand and model) and the same problem, so not a driver issue...

  any idea?

  Thanks in advance

  Stephane likes

  Best I can tell with Sierra make a pdf of many a scanner using the preview page is completely broken. Time to report through www.apple.com/feedback/.

• Why firefox is always problem when I put cache 0 MB Web site?

  Hello

  I develop Web sites and about 1 month, I think that to the top of the Version 30 or 31 have problems with the cache.

  I activated the manual cache size and set it to 0MB (Web sites), but I still have problems that a site is cached.

  In development, it's a big problem, when the browser still shows you an old page. I have change something in my code, but it does not apear when I reload the page. When I opened another browser chrome for example I see my changes.

  BTW, I don't like chrome and I was really happy when I stay in firefox. But the described problem could couse me to change browser.

  Best regards and continue to have fun in dev
  Michael Topor-Grabowski

  Hello Michael,
  There are actually quite a few ways to accomplish what you're trying to do. To refresh the page without querying the cache, the simplest method is to type ctrl and f5 instead of simply typing f5 or hit the button reload. The second would be to set up your development web server to transmit the "Cache-Control: non-cache ' directive cache so that any browser you test with, (as long as it is in accordance with w3c) does not cache the hosted Web pages. The last method should be considered as a last resort, but you could also disable the cache of Firefox by activating / disabling the network.http.use option - Hide all: config to false. Remember, once you decide on one of these methods to clear your browser cache before testing again.

• My USB to ethernet adapter works only if plugged into my MacBook Pro. I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports! Any suggestions?

  My USB to ethernet adapter works only if plugged into my MacBook Pro.

  I tried to use to start an expander USB (power strip), but this has not--a problem when you have only TWO USB ports ports!

  Any suggestions?

  Juice what 'expander' did you use?

  What model of MacBook Pro?

  This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.