problem when importing jpg and dng files?
Hello..
I take all my photos in the first two and... and so far Lr jpg format would be ideally located both the peak of flood and the jpg one after the other, but lately Lr first puts all jpg files and halfway through all the DNG... does someone knows why this might be happening?
Thank you!
At the bottom of the import dialog box, you should see the word sorting:
Click the menu drop down and choose the time of capture.
Tags: Photoshop Lightroom
Similar Questions
-
separating the jpg and raw files after import into lightroom 5
I would like to separate my jpg and raw files as soon as they are in lightroom (right after importation), so that all my jpg files are 1 after another on the Filmstrip below and my raw files are one after the other. is this possible?
In the grid view of the library, on the tool bar (T), replace "sort:" to "File Extension."
-
Is it possible to choose Import in the DNG file only?
I couldn't get any support or contact information, so I try to get an answer to my question, as follows, from here.
Is it possible to choose Import in the DNG file only?
I like to keep the disk space and the ability to remove unwanted jpg copies is unnecessary work for me a lot of your time.
Then nobody knows where to send the program errors or suggestions for improvement?
Thanks in advance
You can also make sure that you don't have the following "Processing JPEG files" option to raw as separate photos selected. See the screen capture.
-
Link adjacent JPG and CR2 files
Most of my JPG and CR2 adjacent treats files in a single file when you view in Lightroom. However, I have a folder that, for some reason, the treats like two photos - they are not connected. How can I fix photos in this folder for adjacent JPG and Raw files can be considered as a simple photo?
Thanks for any help.
You can promote the crude to the top of the stack. Probably if you expand all stacks, then filter to just the RAWs and then SHIFT - S to move them all at the top of their respective batteries. I never shoot RAW + jpeg, so I have nothing to test on.
Jao
-
How to make my Jpg and RAW files into version sets (PSE10)
I take the two jpg and RAW files on my camera so most of the time, I am happy with jpg and do a little editing, but from time to time I need to really work on a picture which is the place where the RAW file is very convenient. In my photo well, I have 2 of each image displayed is to say the jpg and RAW. How can I get it appears only the jpg and RAW either hidden, or as a set of version collapsed? Have 2 of each photo makes the photo well look poorly maintained and full of duplicates.
Help appreciated.
You have to stack pictures. Sets of version does not apply here.
-
Import into LR CC problem when recording RAW and JPEG image camera
I have my unit set up to record the RAW and JPEG formats for each image, but when I import it imports only RAW files. However, if I take just the RAW or JPEG only it is important as I shoot very well. I can go to the card and recover JPG files and manually copy them to the directory and then go and import them into LR, but even then, when I'm in the folder they are in they do not appear, but when I go into the parent folder they show. When the camera creates the FIRST and JPEG files, it gives them exactly the same name except for the extension which indicates if it's RAW format or the. JPG. I have double and triple checked and the. JPG file is located in the same directory as the RAW file. When I import the photos I have change the name for a custom name, so when I copy and past the. JPG files in the folder plus the suffix of the file, the file name is also different. How can I solve this problem?
Hi BullRhino,
Its setting, you need to activate in Lightroom.
Open Lightroom > go to Lightroom preferences > general tab > check the option "Separate processing Jpeg in a file" > restart Lightroom.
See the screenshot below
Let us know if that helps.
Kind regards
Mohit
-
ImportSecurity.cmd: problem when importing file s
Hi all
We have trying to load security for the new application created,
We build groups in HSS
and the s file is as follows
GF_ALL, "cc_0120", write, Member
the file named: SecFile.txt
now, when importing, it shows success in the newspaper in the application
However, it throws an error saying:
Successfully connected
Mon Jul 13 15:35:47 UTC 2015: the following access not imported:-GF_ALL, cc_01 «»
20 ", write, Member due toInvalid indicator of access to the file.
Mon Jul 13 15:35:47 UTC 2015: access control setting...
Mon Jul 13 15:35:47 UTC 2015: Total provided rows = 1 added successfully to = 0
Mon Jul 13 15:35:47 UTC 2015: logout of the application...
Mon Jul 13 15:35:47 UTC 2015: disconnected from the application.
Mon Jul 13 15:35:47 UTC 2015: import security successfully completed.
any advice will be much appreciated
Thank you
Messi
Access permissions = READ, READWRITE, or NONE
See you soon
John
-
AE stopped opening cr2 and dng files, PS still works
Hello
I have a mac book pro 16 GB OS 10.9.2 and worked over 6 months with AE and Photoshop CS6 open and work with cr2 (Canon RAW 5dmk3) and dng (magic lantern converted) files.
all right. No apparent reason (maybe any kind of update?) my AE does not recognize these files more. They appear grey and not selectable in the open/import dialog box.
I can still open them using photoshop with the well known for raw files dialog box. so somehow, the importer of crude seems to work? Tried the adobes 8.4 dng converter, but do not always open files.
Do you have anyone encountered the same problem and found a solution? Thanks a lot for your help!
Roger
See this:
http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html
-
Can I merge a JPG and RAW file into a catalog and keep your changes?
I used to shoot RAW and JPG and always used to all copy in the same folder. That worked well, but was a bit pointless as the JPG served as only a temporary preview until the RAW was loaded in behind her. For the speed of editing events, I started to divide files in two separate folders and import, but tag and basic edits, crops etc. on jpg files, so for the use of the 'News' site, then work on any higher quality customer since the FIRST requirement. Would be nice if I could later merge the two together to make these fundamental changes - and sides etc - then were applied to the RAW files. They have the same names - bar extensions, of course - be renamed by LR import. I tried on a test session, but it just seems to add separate JPG and RAW images to the catalog. Is it possible to him have associated the RAW not published with the edited JPG?
Guy
Guy,
I don't want to get into or the not-so-rights of your workflow.
You can try Syncomatic Plugin from John Beardythat will synchronize the metadata and possibly develop settings between different file formats with the same (or similar) base name. Subsequently you can stack the Raws with JPEG files, possibly using Auto carpet when capturing".
But remember that application development parameters of a file to a Raw JPEG may not create the desired corrections, as the base is something completely different.
Gossweiler beat
Switzerland
Post edited by: b_gossweiler
-
So, I just discover the RAW function in Bridge in order to make the output of my camera JPG and converted .dng while doing a little control interesting features of the image. But, big but, when I transfer the file in Elements 8 I can't apply layers. Why is this? Is there a way around it other than to resume the .dng to JPEG file?
First of all, I'm glad you like editing .jpgs in the Adobe Camera Raw interface. I love her. He did a good job, easy.
There is no point to save the .jpgs in the form of .dng files. It is simply a waste of time and a waste of disk space. Does not improve the quality of your image.
When you open a file in the editor of PSE, you can only apply layers on 8 bit images. You cannot apply layers on 16-bit images. Then... either in ACR, either in the PES Editor, change the number of bits from 16 to 8.
-
Faced with problems when running CPC and CPA Imort commands
Hello
I am facing problems when executing the commnads CPP and CPA from command line to import a file of CPA. I followed a Blog through "b2bGurus", but the third step is not clear. As for what should be OK step 3.
It will be a great help if someone can explain as well as the exact command to texts needs.
I'll also send the link I followed orders "http://www.b2bgurus.com/2008/11/cppcpa-feature-in-ebms.html".
In this bolg followed the steps as "how to the PRC and the import of the CPA."
Kindly help as this is urgent.
Thank you and best regards,
Kunal BanerjeeHi Kunal,
Its a typing mistake, please try
Of $ORACLE_HOME/ip/tutorial and run below command
Java oracle.tip.adapter.b2b.utility.EBMSUtility cppcpa.propertiesConcerning
Nandagopal.S -
Download problems. Images JPG and my Nikon Coolpix P7800 to my MacBookPro NRW
. JPG and NRW images will upload more from my Nikon Coolpix P7800 to the camera section post it in the Finder on my MacBook Pro.
So far they have downloaded automatically when I plugged my camera into my Macbook but not anymore. This means that they also aren't in Nikon View NX2 program so I can't work with them.
I have not changed anything as far as I am aware, but I MacKeeper and I recently had do them an audit of the single system. Maybe people it changed something, but I'm pretty sure that the problem existed before that date.
Does anyone else have this problem? If so, help! I run OS El Capitan 10.11.1
The images appear, when you use a card reader instead of plugging the camera?
Or when you use another card?
-
Viewing JPG and GIF files crashes the server (Windows Server 2008)
I work in an office with windows server 2008 and we are having a problem where the right click images and choosing preview or open with IE will crash our server, then everyone must wait 3 minutes to go. I tried like 2 hours and cannot find any info on this problem online. Everyone knows about this problem with Server 2008? It seems to be very consistent and arrived on different images (JPG, GIF) until we had to install a third Viewer left - but the problem is still there and now and then someone accidentally blocking us.
I have tested what it about three times what about everyone when it crashes - but so far I'm 3 for 3, so I don't think it's randomly occurring even though I don't know if led EACH image.
Help, please!
It's a consumer Forum, your question would be better fit in a Technet forum, please repost it und include more details (for example the detailed error message). Thank you. http://social.technet.Microsoft.com/forums/en-us/categories/
-
Can't see my backup jpg and txt files.
I made a dvd backup of photos in JPG and jpeg a couple of years and when I try to open it tells me that windows does not recognize the format. I backed up with nero (don't remember what version) on a computer running Microsoft Vista. I have also 4 documents txt I try opening with Notepad and they open empty but the file sizes are correct, which leads me to believe that the files are still ok, but windows 7 can't read them for some reason any. What should I do?
Perhaps the following links will help you get started:
Contents of the help of IsoBuster
http://www.IsoBuster.com/help.phpStarting with IsoBuster
http://www.IsoBuster.com/help.PHP?help=110Find files and folders missing
http://www.IsoBuster.com/help.PHP?help=145Good luck...
-
Newbie questions:
1. how to import a Word file (~ 35 pages)?
2. how to import an entire pdf file so that it is editable in InDesign (that is, not as an image file)?
It's the way that you him automatically. Just click on the first page and all other pages are generated automatically. Hold down the SHIFT key when you click on will do so.
Maybe you are looking for
-
How can I set up a contact in the address book that contains more than one address?
I am new to TB. I want to be able to create a group of addresses as a contact in the address book that will allow me to send my message with a single contact instead of having to add several contacts to email. Thanks for your help. LK
-
HP 8600: impossible to Scan of both flat and ADF in a single document [new]
This particular issue was published earlier, with no response. Since the November 2015 update, you cannot scan ADF and flat in a single pdf document. This will be corrected, or is the lost capacity for ever?
-
Can I restore the folder "Images" at an earlier date?
I save my photos on a disc when my computer crashed. As I had apparently cut instead of copy some files were lost. Is it possible that I can restore from an earlier date (such as the restoration of the system) and get my photos that I've lost the ret
-
I need a HP person to call me. My 6500 has more (new) will not photocopy, print very light when new ink in there and doesn't work well at all. Please help me. Donna Blizman
-
Windows 8 on AMD Radeon graphics card is not completely fill the screen
Just installed Windows 8 Pro on a Dell Inspiron Zino HD with an AMD Radeon HD 4300 Series. Display is a LG on HDMI monitor. Installation went well apart from my screen Windows does not fill my entire screen. I don't think it's something to do with t