Problem when migration is complete on the user profile

Similar Questions

• In Windows 7, cannot access the user profile get the error "the service user profile Service has no logon.

  When you try to access the user profile, get the error message "the service user profile Service has no logon.  User profile cannot be loaded. "The new profile tried to go through the steps of profile user fix damaged by ms, but trying to create a new user profile to copy the files from the damaged user profile does not display on my C: drive the users folder (as it should).  Anyway to fix the corrupted if user profile profile are available?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• What should I do when the display shows "at the service of the user could not connect. Unable to load the user profile... ?

  I connect to my profile and I am not able to log in. The display shows "at the service of the user could not connect. User profile cannot be loaded... » » ?

  Hello

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  -------------------------------------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  -------------------------------------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the prompt here if
  necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  -------------------------------------------------------------------------------------------------------------------------------------

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Error when you try to connect to the account of user: the user profile service failed the lied/user cannot load profile

  Im trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving a message saying that Windows Explorer as stoped working so I can't open any doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to m trying to connect to my own acc on my computer, but it says 'the user profile service failed the lied/user cannot load profile' im using an accout comments I had set up for my sister and that I keep reciving one message saying that stoped working so I can't open Windows Explorer all doc.music. pictures or whatever it is im in internet using foxfire that I installed it on another acc please help I don't know how to connect to my admin accmy admin acc

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• User account problems - create a new user profile with the error message: the user profile service service doesn't have the opening of session/user cannot load profile

  I'm very used to make new user accounts and he have done many times, but this is the first time I had trouble with it. I'm just trying to create another user on my computer, but every time I try to create an and log on to it, I get the message: the user profile service service has no opening session/user profile cannot be loaded. I tried to create this profile as a standard user, administrator, and a customer. Does anyone know what is the problem?

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Error when the connection that reads the user profile service service has no logon. User profile cannot be loaded

  I've worked on my computer fine all day and then went to log on to the evening and received this message. When I look on user profiles it shows my user as a 'backup '. I have a lot of documents and emails that I need. Is there a way to fix this, other than to create a new account and delete the old one?

  Hello

  The data is still there and accessible by any admin look under C:\Users account where C: is
  the drive where the profiles of users (folders).

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. Also the ADMINISTRATOR account of
  Safe mode has no password by default unless someone has changed.

  These problems and similar bugs can help:

  A temporary profile is loaded after you connect to a Windows Vista-based system
  http://support.Microsoft.com/kb/947242

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  How to fix error "the user profile Service has no logon. Profile of user cannot
  be responsible. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  -----------------------------------------------

  Other methods:

  Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
  and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
  accounts that may be difficult. If necessary you can also reset your password in the accounts.
  Do not forget to leave your Admin account and the other to the desired level.

  Make another Admin account with your password and use it to fix the others if necessary. (just for
  repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.

  DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
  not that an Admin account that is not used except for testing and difficulty).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• I created a new Admin account and when I went to her, I got the message: "The service user profile Service has no logon. The user profile Service failed to load.

  I created a new Admin account and when I went to her, I got the message:

  "The service user profile Service has no logon.  The user profile Service failed to load.

  What's up with that?

  Hello

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• "The user profile service failed the log - on" problem of Windows XP administrator account

  OK, so my mom is unable to log on to his profile on Windows XP Home Edition. She has both the administrator account. When she tries to connect, you will see the above error message. My brother can log into his account without problem.

  My mother told me that she had initially gone on ITunes and downloaded 3 things that the program said she needed. When she went to reboot his computer according to the instructions, she received this error message and cannot connect.

  She then guest account and was able to remove the 3 programs, but nothing helped. If anyone has any ideas, it would be appreciated. This is the Windows program that is already installed on the computer.

  I tried to search in the forums, but it's a little confusing. She got also never all warnings "temporary profile".

  Thank you!

  Looks like the user profile is damaged.  To allow for the recovery, you will need to log in with an administrator account.  If your MOM was the only administrator account, try starting mode safe mode (F8 at startup) and log in as user 'administrator '.  The default value is the empty password.  After that, follow the steps in the following article:

  "How to recover damaged Windows XP user profile"
    <>http://support.Microsoft.com/kb/555473 >

  HTH,
  JW

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• intermittent connection problem: 'the user profile Service service has no logon. The remote procedure call failed and did not execute. »

  Hello, I'm having intermittent problems with logging in my Windows 7 computer.

  Often after reboot due to applications of Windows Update or any simply restart after the holidays, I have the following message on trying to connect:

  "The service user profile Service has no logon. The remote procedure call failed and did not execute. "

  When I click 'OK', the machine disconnects and try to restart.  This can occur 2 to 5 times before _works_ .  But sometimes it happens at all.  And sometimes he _partially_ connects, but my "reminder" and the "Sidebar Gadgets' not loading not correctly and I get a different RPC error - for example, I lived once a message RPC over Skype cannot work because the remote procedure call failed.

  I'm fairly certain that it is different from the frequently reported issue 'profile of corruption', which was experienced by others.  This problem manifests itself as 'the user profile Service does not log. The user profile could not be loaded "and is reported as a blocking problem consistently reproducible which is set by the 'fixing' of the profile.

  However, the issue I feel is clearly related to an RPC problem is intermittent and not consistent - maybe one of my devices is not reset properly?  Where I can look in the logs of Windows, to provide relevant information on this subject?

  Because my computer was still under warranty, I have raised the issue of Dell and they removed the damaged system file (user account) last week.

  I hope that this will finally fix the problem (previously the error message disappear and reappear after a few weeks later.)  I'll give it a few more weeks to be sure.

• My Toshiba Windows Vista says that failed to load the user profile when I try to log in.

  He said also the user profile service service has no logon. I have not changed my password.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• The user profile Service service has no logon. User profile cannot be loaded. Then I deleted my user profile in safe mode, and when I connected, all the files in C:\users\(old users name) are all gone

  I use Vista Home Premium

  1. Windows automatically updated and turn off the power.
  2. I couldn't connect, it says that the service user profile service does not logon. User profile cannot be loaded.
  3. Then I deleted my user profile in SafeMode by doing: 'make right click on computer - properties - settings - advanced - user - deleted my old account profile settings '. There is no option for me to "keep my files."
  4. Then I managed to connect, I guess having creates a default user account? Because there is a new folder in C:\Users\, called (former name). (old name) - PC. In C:\Users\(old name), it is empty.

  Now, all my original files are gone because I deleted my old user profile. The size of my c: drive-has not changed much, so I guess all my files are still in only my computer, it's just that I can't find their "PATH". How could I get re-navigate to all my files? I need them so badly.

  Thank you very much for the one who can help me.

  Hello

  Log on as ADMIN and look in C:\Users where C: is the drive where the user folders.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google
  Earth) has been known to cause this problem.

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• problem opening session: the user profile service failed to connect

  original title: problem opening session

  I have 2 accounts.recently, user when I try login I get this message that says - user profile service is not logon.the another account is still ok.what happened past and how to fix

  This isn't the FULL error message. Next time please make sure you post the message in its entirety and verbatim.

  Is that what your error message: unable to load the user profile and the user profile service has not the opening of session

  If so, please read on...
  You have another admin account , you can connect?
  If so, please do and do a system restore, if no help, run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly press F8 key until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, do a system restore first, if not help, run it
  Microsoft support tutorial below.

  2. If you cannot connect to your own account, you see another
  next to your admin account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Connect to it and new to do a system restore first, if no help, run
  the Microsoft tutorial support listed below.

  If you are able to log on in safe mode, do a system restore. Choose a
  Date of when you were able to log in NORMAL MODE as your restore point.
  How to restore the system:
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Tutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods, go through one by one.
  Method 3 has a "fix it for me" application

• When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. »

  original title:

  When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?

  You have another admin account , you can connect?
  If so, please do it and then run the Microsoft Support tutorial below.

  If you don't have another admin account, go into safe mode.
  Here's how to get safe mode:
  Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.

  In the window of logon in safe mode...
  1 can connect to your account administrator in safe mode?
  If so, run the Microsoft tutorial support listed below.

  2. If you can't log into your own account, you see another admin next to your account in the logon screen?
  If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.

  3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
  How to do system restore: System Restore tutorialtutorial from Microsoft support :
  http://support.Microsoft.com/kb/947215
  There are several methods,go through one by one.
  Method 3 has a "fix it for me" application
  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Error message "the service user profile Service has no logon. Unable to load the user profile"How can we get in the laptpop to solve the problem? /

  We get the error message "the service user profile Service does not logon, user profile cannot be loaded."  Prevents us from entering the computer laptop-so how to solve this problem?  Help?

  Hi LisaPie,

  Step 1: You can run the fixit available in the article below

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  If you cannot start the computer in normal mode, try the steps in safe mode with networking

  Step 2: Start the computer in safe mode with network. To do this, follow the steps below:

  Access the menu advanced startup options by turning on your computer and pressing the button F8 before Windows starts. Advanced startup options menu select SafeMode with networking

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.