Problem when used BSE update file for AS400

Similar Questions

• A STANDARD XML TAG DOES NOT WORK PROPERLY WHEN USED IN RTF FILE FOR XML RE

  Hello
  
  I am using the following tag:
  <? If: TASK_STATUS = "Open"? > < xdofo:ctx xsl: attribute = 'block' name 'color' = > red < / xsl: attribute >
  <? end if? >
  to change the color of foreground text which, according to some conditiosi, need to print in
  PDF format using xml and rtf files reports.
  But I was able to get only 3 colors (red, blue, green) to use, other colors such as orange, cyan etc are not
  work.
  Please let me know what all the colors are supported by oracle in printing to PDF using xml reports.
  Indicate if we do a few things related to parameters or so.
  
  I'm usning 5.6.3 XML version.
  
  Kind regards
  Amar

  Colors can be expressed by a known name and a hexadecimal value. The hexadecimal format is widely used in HTML programming and has a format of #abcdef, and "abcdef" may be as aaddcc values and so on. For some primary colors, you can get away with #abc, but this is not very common.

  You should always design with colors Web safe in mind. That limited to 16, but should be much thinner (more all 16 have known names like red, cyan, yellow, etc.).

  http://www.w3schools.com/HTML/html_colors.ASP has a good explanation of the standards.

• Problems when using two search bars for filter 1 table

  Hello

  I can't see why this code does not work. It seems that the variables are broken or something but not too sure.

  I had initially 1 single search bar on the page of the inventory where the results would appear and everything worked fine, but when I added a search bar 'master' on the home page, which redirects to the inventory list carrying the variable (which was sought), he comes into conflict with the search code original. Both work independently one another and fine when only the codes research is on work page, but once I combine the two search bars, it will not show the results.

  the Variables are reported (from the home page) without any problems, I did echo out on the inventory page.

  I decided to combine the variables to see if research can run on a single article of the code, instead of duplicates (I thought it can interfere) but no luck. (The code below is that with combined variables)

  Any help would be much appreciated!

  $search = ($_POST ['txt_search']) OR (_GET ['searchprops']) $;

  If (isset ($search))

  {//Only show what is sought

  $searchword = $search;

  $query_propsinv = "SELECT * FROM accessories WHERE name LIKE ' %". "." $searchword. "%' OR description AS '% '. $searchword. ' %' Color GOLD AS '% '. $searchword. "%' OR like ' %". " $searchword. "%' OR size AS '% '. $searchword. "%' OR weight AS '% '. $searchword. "%' OR LIKE ' %". " $searchword. "%' OR as '% '. $searchword. "%' OR location AS '% '. $searchword. "%' OR secondary AS '% '. $searchword. "%' OR the amount AS '% '. $searchword. "%' OR id LIKE '% '. $searchword. "%' OR BC AS '% '. $searchword. » %'";

  }

  {if (! isset ($Search))}

  $query_propsinv = "SELECT * FROM props."

  }

  $query_limit_propsinv = sprintf ("%s LIMIT %d, %d", $query_propsinv, $startRow_propsinv, $maxRows_propsinv);

  $propsinv = mysql_query ($query_limit_propsinv, $drama_database) or die (mysql_error ());

  $row_propsinv = mysql_fetch_assoc ($propsinv);

  This combination will never work:

  $search = ($_POST ['txt_search']) OR (_GET ['searchprops']) $;

  Try this combination:

  {if($_POST['txt_search'])}

  $search = $_POST ['txt_search'];

  }

  {ElseIf($_GET['searchprops'])}

  $search = $_GET ['searchprops'];

  }

• Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and ann

  Is this really the case with the free player, the clients can access is no longer a PDF to add comments and mark out? We have always used a PDF file for the reviews of books/documents, but now we hear customers that there is no way to add comments and annotation. Please let me know if this is the case, or if there is a solution

  '' If '' they use the free software Adobe Reader and "If" there is no security prevent this, he should be able to add comments.

  It'll be hard to say what's wrong without more details such as what exact version of the reader they use, they open the pdf file in a browser or in the player itself and what exactly happens when they try to add comments.

• Adding file names when using "combine the files supported in acrobat.

  Adding names of files when using "combine the files supported in acrobat.

  Is this possible?

  Either as a note at the bottom of each page or a note on the print?

  Without having to write or copy and paste the names of files in the PDF by hand?

  As in "automatically"?

  What it is for:

  I do guides step by step for some software for computer magazine.

  I am taking screenshots of the software and they are sent to the art director as a bunch of .tif files to be used for layouts.

  I need to be able to show him where to put the numbers (1,2,3 etc) for steps-by-step and where he can cut the screenshots.

  I am therefore files .tif Guide to the artistic director. Using Acrobat 9 Pro I can easily combine all the .tif files into a PDF with the extension of the shell "Combine" supported files in acrobat.

  And using the comment & markup tools, I can easily ad numbering, arrows, important areas and so on.

  However, these guides often include a lot of screenshots, so it is important for the Artistic Director to be able to quickly identify each screenshot. And for that he needs the name of the original .tif file to follow the screenshot in the pdf. So that when printed out the pdf and made his page layouts, there no browse and compare a pile of screenshots without a name.

  When you combine files in Acrobat format (in flat PDF rather than a portfolio), you will get bookmarks for each document referencing the original file name. If they are not displayed, click the button in the dialog box Options combine to turn them back on.

  Since you're combining a series of pictures, you'll find yourself with a bookmark for each page - so the value seen initial of your PDF "bookmarks and page Panel" to file on the file > box properties dialog and you have close to what you want. Write the names of files in the footers is possible but requires script to extract the bookmark names and page numbers, then write a watermark on each page.

• Is there anyway that I can use the MP3 files for the computer system sounds in windows 7

  Is there anyway that I can use the MP3 files for the computer system sounds in windows 7. Any help would be appreciated, thanks - Joe

  I don't think so. If you convert the .wav files, you could. Google for an MP3 to WAV converter.
   
   

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• Problem when the API update for 10.2.0.1155

  Hi all

  I get error 'Change in API level' when I'm updating the API level.

  For more information please see the attached screenshot.

  Please suggest any solution for this its urgent.

  Thanks in advance.

  Similar thread with answers here...

  http://supportforums.BlackBerry.com/T5/native-development/new-10-2-Gold-install-API-error/TD-p/25468...

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Error when using windows update on bootcamp

  I used bootcamp to install windows 10 home complete edition on my iMac 21.5 with Retina display. I had installed windows 8.1 because I thought that it would be cheaper to get an and upgrade to windows 10 but the update never worked. Whenever I have run windows update it lists a bunch of updates but the problem lies in the update of drivers intel. Whenever it will install those, it restarts like 3 times and then goes into automatic and removes this update. So I never could go from 8.1 to 10. I purchased 10 windows and installed, but the same thing happens. I run windows update, and it lists the normal updates when you get a new start. When it comes to drivers intel for iris graphics pro, it restarts and goes into automatic. In windows 8.1, she paused, but in windows 10 it ceases to be in this vicious circle. It restarts, then ASR, then starts up without the updates, and then running windows update and restarts againg and again so all this. I tried to delete the drivers intel bootcamp installed and that seems to work, but it still restarts. Is there a way I can hope to make it work as it should, or I'll just have to consider removing the drivers or going back to 8.1? Someone please help! :/

  Please see 10 crashing Windows, but don't know why.

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

• His problem when using AC adapter / CC on satellite

  Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
  I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.

  Looking to hear from you guys.

  Hello

  First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
  Diagnostic tests are needed to find the fault.
  In this case, a call to the service in your country partner would be very good idea.

• microphone problem when using Skype

  When you use Skype I am able to listen to the other appellant, but they cannot hear me.  I have two speakers and one is Logitech quick cam when using Skype.

  Please let me know what I need to do to solve the problem, thank you

  Hello

  Please try (very close to laptop):

  https://support.Skype.com/en/FAQ/FA897/my-friend-can-t-hear-me-Windows-desktop

  Kind regards.

• Error: 80070005 when using Windows updates.

  Former title: Windows Update

  I have a Windows Update icon in my status bar that says an important update is available. When I tried to install the update, I get a message code 80070005. This update couldn't be installed. The update is for my monitor, a 20-inch LCD monitor HP. If it can not be installed, so please stop this update to show that they me. Thank you, Walter Bivins

  80070005 = access denied

  If you do not want the update, then hide the update.

  Thank you.

  Hhhhh

  TaurArian [MVP] 2005-2011 - Update Services

• Printing problems, when I go to search for a printer in windows, it says domain services active directory is not available

  My printer does not print. I rebooted the printer, but I still can't get it to work. When I go to search for a printer in windows, it tells the domain services active directory is not available.

  Hello

  1. is the computer connected to the domain?

  2 did you change on your computer?

  3. What is the brand and model of the printer number?

  4. is this a network or connected via USB printer

  Method 1:

  I suggest you follow the link and check.

  Printer in Windows problems

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Method 2:

  I also suggest you to follow the link and check.

  Solve printer problems

  http://Windows.Microsoft.com/en-AU/Windows-Vista/troubleshoot-printer-problems