Problem when using with native document as cdf

Similar Questions

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• His problem when using AC adapter / CC on satellite

  Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
  I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.

  Looking to hear from you guys.

  Hello

  First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
  Diagnostic tests are needed to find the fault.
  In this case, a call to the service in your country partner would be very good idea.

• USB-6225 DAQmx measurement problems when using a voltagesplitter

  Hi guys

  I had a serious problem regarding the use of DAQmx USB-6225. Please look at my diagram below:

  

  When I measure the waveform sine on AI0, everything is OK. Even with a very sampling rate high as 80kS.

  When I measure the waveform sine on AI1, everything is OK. Even with a very sampling rate high as 80kS.

  When I measure the battery voltage on AI2 CC, everything is OK. Even with a very sampling rate high as 80kS.

  Now comes the problem:

  If I measure all three analog inputs or the two and two together, I get a very different result when I measured one and a single channel. If I add more channels (i.e AI3 and AI4) on my USB-6225 DAQmx, without connect anything to them, I can see the sinuses even as I do with AI0 AI1, but with less amplitude.

  When I measure the voltage as well as AI0 and/or AI1, the domain controller becomes sinus armor as well. If I connect the + 2 V DC directly to data acquisition without resistance, I see a line perfectly DC on my chart, but with the sinus AI3 and AI4 top.

  If I use an oscilloscope and measured directly on the same wire that goes to my data acquisition and the resistorcoupling, I can see small pulses of the samplingfrequency and the signal seems quite noisy.

  That's my big problem:

  Everything works perfectly if I use R<100Kohm. any="" value="" below="" 100k="" is="" ok.="" this="" coupling="" on="" the="" schematic="" is="" just="" a="" test.="" the="" trouble="" comes="" when="" i="" need="" to="" measure="" a="" circuitboard="" that="" draws="" energy="" from="" a="" capacitors="" in="" the="" circuit.="" if="" i="" use="" any="" resistors="" below="" 1megaohm,="" it="" draws="" energy="" from="" the="" circuitboard="" and="" the="" test="" is="" not="">

  Anyone with some experience around this problem? The impedance of the analog input on my USB-6225 DAQmx is 10Gigaohm so it should not really been an issue.

  Here is what I tried:

  With the help of a D - sub cable with shield. I tried to use with no shield shield closed, I have both ends and closed, the shield only on my DAQ.

  I checked my code and also just used the DAQ assistant.

  I checked all parts off my setup for groundcircuits and I twisted each cable from any power supply, the signalgenerators, the DAQ cables.

  I have connected my DAQ to mainsground (in the wallcontact 230V and Yes, we use 230V in Norway). Also any other equipment.

  I connected without mainsground. Also any other equipment.

  I tried cables as short as possible.

  I tried to use the differential, CSR (Respect to GND), NRSE (Respect to the sense of IT). Nothing has worked.

  I tried to use as sample rate and samples possible. (It helped a little when the DC measurement and AN analog input. If I tried all three, he has yet again).

  All this comes to mind that the USB-6225 DAQmx cannot manage measuring more than resistors with values around 1Megaohm and above.

  The answers will be rewarded with congratulations and a sincierly 'Thank You '.

  Hi guys again!

  Bother replying this thread

  I'm a guy. I don't read manuals! But now that I did... And. There are 4 pages describing my problem and what to do about it. So problem solved

  I have experience ghostvoltage of the other channels due to the high - impedance of the source. I created a follower of tension with an op-amp and the problem disappeared! Thank you ni.com/info/f/. Do you have answers for everthing is there to inquire. Except why I ran out of beer. mmm beer!

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

• microphone problem when using Skype

  When you use Skype I am able to listen to the other appellant, but they cannot hear me.  I have two speakers and one is Logitech quick cam when using Skype.

  Please let me know what I need to do to solve the problem, thank you

  Hello

  Please try (very close to laptop):

  https://support.Skype.com/en/FAQ/FA897/my-friend-can-t-hear-me-Windows-desktop

  Kind regards.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Transform problems of effect when used with the depth of the 3D layer

  Here is my set upwards.

  I have PreComp with graphics any illustrator with active continuously rasterized layer.

  This graph has a reflection in it. I was thinking by applying the effect processing, offset setting to-100 and by setting the anchor point.

  Regarding the graphics move from left to right (X, Y) there is no problem and anchor point is in its place.

  As soon as I do the 3D layer and start changing the values of depth thinking begins to jump around.

  My guess is - it happens that point because of anchorage is a constant value and because the thinking is based on its value it does not follow the base of the graphics. Purhasps it is a snippet of code to be used to bind the value of the anchor Point to the Zoom value? Adjustment of the values of anchor with keyframes turned out to be too difficult.

  In other words, I like to keep thinking at a constant distance from the base of the graphic part and once the relocation of graphics on or in the reflection does not follow.

  I précomposé this graphics and it imported into the new Compostion and applied movement XY and Z using the camera and Null layers. It was the same effect and reflection did not stick to the base of the graphic.

  I need to keep the collapse processing enabled on all consecutive Comps/PreComps to ensure that the vector art makes to high quality.

  What would be a good way to make a reflection of a 3D/preComp layer in the model where the movement controlled with layers of continuously active camera and Null, with the Transformations of rasterized/reduce?

  I'm with Mylenium on it. Your concept is inappropriate and you do it is much too difficult. Just put the anchor at the bottom of your reflection, then resize it to 100 in y [100, -100] can do the two 3D layers and implemented a matte degraded on the reflection layer.

• How to solve the problem of the Alt key, when used with the clone stamp, generating an image overlay?

  I'm using CS5.   When I try to use the clone stamp or healing paint tools, by pressing the Alt key generates a foreign picture that superimposed the

  the image that is being prepared prevents these tools operate by sliding autour when ALT is pressed. An elso had this weird problem? How can it be solved?

  Thank you

  JackIsaac

  Open the clone source Panel tool and unchecking - see the overlay, solve your problem?

• Cannot access site of Lenovo's Support with Aurora 34.0a2 while I don't have any problems when using Firefox Beta 33.0

  Try opening the Lenovo mainstay (http://support.lenovo.com) site.

  Aurora 34.0 has poster error regarding redirects by the server. There is also a hint about the possible reason being blocked or refuse cookies (I'm not 100%, what is my translation that I am using a localized version browser). Firefox Beta 33.0 works without any problem. I already checked the settings of cookies, but can not find a solution.

  Hello tjwasiak, I tried and could get the site to load without a problem. can you go through all the steps listed on the Web sites say cookies are blocked - pledge and see if it improves things?

• Problem when using SOAP requests with HTTP POST function

  Hello!

  Using the vi of HTTP POST to send SOAP requests to a device, I encountered a problem.

  Take care of the HTTP header for you HTTP POST vi and defines the type of 'content' as "Content-Type: application/x-www-formulaires-urlencoded. Who is considered to be 'non-soap' requests by some Web servers.

  Standards W3C says in this case, you should be content-type: "application/soap + xml".

  Link to the page to W3C standard: http://www.w3.org/TR/soap12-part0/#L26866

  That is possible to update this feature in a future release so that programmers can choose (or type) the necessary content type?

  Have you tried "Add header" to change?

  http://zone.NI.com/reference/en-XX/help/371361L-01/lvcomm/http_client_addheader/

• I use LR 4 and you have a technical problem when using LR with another program.  I was told to reinstall LR.  I have a disc for LR 3.  How should I proceed?

  I use Photo Mechanic with Lightroom 4.  I was asked to re - install Lightroom.  I have a disc for LR3.  How should I proceed?

  Jaygorodetzer Photoshop Lightroom updates contains the full installer.  I would recommend downloading the Photoshop Lightroom 4.4.1 updates.