Problem when using SOAP requests with HTTP POST function

Similar Questions

• A problem when using Flash files with a browser

  Hello

  I have this weird problem when it comes to the use of flash in dreamweaver, whenever I use a flash file & after I test it on Both Firefox & IE browser), I get this weird border whenever I click on it, and here's a photo shows u what I mean...

  If all goes well. I'll take a few answers:

  Thanks in advance.

  Try adding the following (in red) to the style of the web page and see if it helps...

• I have a problem when using Google Maps, at a certain point my custards computer window and says there is a problem with the display drivers and he recovered, but it is not. Problem does not occur with Int Explorrer, so I don't think it's the computer

  When using google maps via Firefox, after asking a place which is not the General section of North America who comes up regularly, the firefox screen becomes white with a narrow banner at the top. A message appears in the lower right corner that says something on display drivers having had a problem, but now have been recovered. However, the display is not recover and the message of the banner is that Firefox is not responding. When I go to restart Firefox if I'm about to restore, the page is still frozen.
  I don't think there is a problem with my computer because it doesn't happen if I used to go to google maps, then G-cards works normally.
  This phenomenon didn't happen before the last update Google or Firefox. I used Fiefox for some years and also Google Maps on previous computers and on this one and not had it before.
  It is a relatively young computer (Asus EeSlate 121) less than a year. I have used Firefox since I bought it and until recently had no problem with Google Maps.

  I solved it myself, after the 'note' that was FF/Mozilla, just as I finished my message, commenting on what it was that my system was, I wnnt back to check my plug-ins, etc. I downloaded the latest Java, the TWO 32-bit AND 64-bit versions and latest Firefox.
  Now everything works.
  Thank you
  B.

• I use LR 4 and you have a technical problem when using LR with another program.  I was told to reinstall LR.  I have a disc for LR 3.  How should I proceed?

  I use Photo Mechanic with Lightroom 4.  I was asked to re - install Lightroom.  I have a disc for LR3.  How should I proceed?

  Jaygorodetzer Photoshop Lightroom updates contains the full installer.  I would recommend downloading the Photoshop Lightroom 4.4.1 updates.

• Problems in using the APEX with glassfish server listener

  Hello
  I try to install APEX with listener application on my Oracle R12 application server. I installed glassfish 3.1 (zip file) and deployed my interlocutor on glassfish using the administration console
  http:// < Host >: 4848
  
  But I am not able to run the following links to get the status of the listener
  http:// < Host >: 8080/listenerStatus
  
  I get the following error when I try to connect using my user adminlistener who I defined under the Admin group, in accordance with the installation guide.
  HTTP status 403 - Access to the requested resource has been denied
  
  --------------------------------------------------------------------------------
  
  type of status report
  
  messageAccess to the requested resource has been denied
  
  descriptionAccess to the specified resource (access to the requested resource has been denied) was banned.
  
  
  --------------------------------------------------------------------------------
  Oracle GlassFish Server 3.1
  Also, when I try to start the administration console application using the link http:// < host >: 8080/apex
  I get the following error
  
  application = 4500 workspace = 10+.
  Error ERR - 1014 Application not found. +
  
  OK+
  
  
  Anyone know what could be the problem? Earlier, when I did the installtion even on my personal computer that runs on Windows OS I had faced some questions like this and was able to resolve by reinstalling glassfish with port 7878 place default 8080 HTTP and that solved the problem.
  
  But this time, I try to install on the Linux server and since I used the option of the glassfish server .zip file I don't have the option to configure during the installation. If you think that the problem is due to the conflict to port 8080, then can you please tell me how I can change the HTTP port without having to reinstall the glassfish Server?
  
  
  Thanks in advance!

  Hi reda,.

  http:// : 7878/apex/listenerStatus (I changed my HTTP port for 7878)

  But I have error which I run this URL below.

  HTTP status 403 - Access to the requested resource has been denied

  I'm sorry I have not answered your question 403, but I thought it should be a primary target in order to get your APEX installation up and running first.
  As you have moved this issue, it is logical to continue on other issues in your deployment.
  You say that you are trying to connect to listenerStatus as "adminlistener" with the group "Admin". You must use a user with the 'Manager' of the page group.
  However, if you have "Admin", you can access the 'status' tab in 'listenerAdmin' that contains exactly the information you see in 'listenerStatus '.

  Also, when I run the URL Listner Administrator page loads properly, but all fields are disabled. So I can only see the page, but not to make changes to the fields on tab 'connection '.

  You can change the JDBC settings in this tab? You must open the subform to display the fields.
  And you are able to change any settings on the other tabs?
  If so, everything works as expected. It is not possible to change the credentials of database using "listenerAdmin". The shape looks like the one you get in "listenerConfigure", but it is implemented differently, so what you see is the expected behavior.

  However, I can click on the 'Apply' button on this page and when I do that it takes me to the login user APEX screen. This is how it should be?

  Yes. What is this "Apply" button to reset the connection pool to use the current JDBC settings, which you should be able to edit as shown above. Therefore, when you apply the changed settings, the listenerAdmin will take you to the start APEX page to check that everything works (always) and continue to use APEX.

  -Udo

• A form of Google with http POST VI

  Dear LabVIEW forum,

  I'm filling out a very simple form of Google consisting of 4 text fields named AI0 AI1, AI2 AI3.

  I use the http POST provided by LabVIEW VI:

  

  When I run this, a new row is added to the answer sheet, but values do not appear, with the exception of the timestamp.

  What I am doing wrong?

  Thank you!

  Hello

  I had a quick look at the form and text next to the entry boxes is AI0... but the names of the input text boxes aren't AI0 etc.. You may need to get the page first and then scan the page for the name of the entry.

  Mike

• Problem when using bb-ant-tools to create a multi-module application

  I am trying to redesign an application prototype into something more adapted to our needs. The prototype was built with the first version of the Eclipse plugin, but I've converted successfully to the current version.

  I have same configuration Ant with bb-ant-tools for it and have successfully build the application and the executable running on the real device.

  But this prototype had code to put them all in a single module, even the source to a third party library with support for managing messages JSON ('J2ME JSON").

  We need to build several slightly different applications from the same code base (differing mainly in aspects of the customer specific look and wording etc.).

  So I want to divide the code into several distinct modules, each providing it is build own artifacts and have a top-level project for each variant you want to produce.

  So at the beginning I want to have these three modules:

  • J2ME-json - the third party lib
  • Code base - the largest part of the source code and default localization resources
  • my-app - the main class, icon resources (and in the future some property files and resources specific to the customer location)

  I have Ant generate files for each module, which compiles and signs packages resulting - seems ok so far, no problem when executing the task of sigtool. The build for 'j2me-json' file and 'code base' defines the product as a type = "library".

  The build for "my-app" file collects the artifacts to build (* .jar, * .cod, etc.) and copy them to a local directory "dependencies", where they will be extracted for the compilation of the actual application. After compiling and signing all are copied to a deployment directory.

  Deploy the application on the device via the 'Desktop Manager' but when I run it on the device I get the error message:

  Error at startup MyAppId: Module ' code$ 2dbase ' attempts to access a secure API.

  The strange thing is, that the "Tool of Signature" window shows demand of signature of all modules during the phase of signature of the request, not only for the request form itself as the error message suggests. And I even sign the modules separately because of this message - but it does not help...

  So, what's wrong here?

  Here is the definition of the actual target of the relevant elements:

  The *.alx file that looks like this:

           My App Name      1.2.1.35               MyAppId.codj2me-json.codcode-base.cod         
  

  I'd appreciate any help with this problem! Thanks in advance...

  Horst Weber.

  Found!

  My mistake was that I thought that I can mix attribute and property file inclusion statements in the task of jdp bb-ant-tools. My actual task for libraries looked like this:

  Obviously, the author didn't want to handle the ambiguity when someone sets the same property as an attribute, and in the file. So you should use either one or the other: If you use properties files, then declare all your properties here.

  So this message "Module attempts to access an API secured." seems to be very misleading: it disappered after correction of the generation of files and I now have a common application.

• His problem when using AC adapter / CC on satellite

  Hello everyone, I have a sound problem when you use the AC adapter / CC in my laptop, it produced unpleasant noises. But it works very well when working with the battery.
  I had no problem before this month. I thought it was the problem with the bios and updated my BIOS as well. The problem is still not resolved. have you guys any experience about it.

  Looking to hear from you guys.

  Hello

  First, I would try to update the audio driver. Check out the Toshiba page and reinstall the driver. If it doesn't solve this problem, I guess that there must be something wrong on the motherboard. Unfortunately, it is not easy to say exactly what's wrong.
  Diagnostic tests are needed to find the fault.
  In this case, a call to the service in your country partner would be very good idea.

• microphone problem when using Skype

  When you use Skype I am able to listen to the other appellant, but they cannot hear me.  I have two speakers and one is Logitech quick cam when using Skype.

  Please let me know what I need to do to solve the problem, thank you

  Hello

  Please try (very close to laptop):

  https://support.Skype.com/en/FAQ/FA897/my-friend-can-t-hear-me-Windows-desktop

  Kind regards.

• Problem when using marshall plan

  We use two versions of ILog (2.5 for Gantt chart) and 3.0 for graphics editing. The two versions in a conflict between them, so I used the Marshall plan to resolve the conflict.
  
  I'm loading ILog 3.0 graphic chronology as a separate swf using swf loader with loadForCompatibility as true.  Basically, this loads the TimelineChart in a scope of brother who avoids conflicts of namespace and class. In the main application, we use Ilog Gantt 2.5.
  
  Now things work properly and I am able to pass data to the chart of chronology of the main application using SwfBridgeEvent (that is marshaled in the swf using the function of Marshal timeline). Only the flash player classes are shared between the two domains, data cannot be passed until objects typed, instead, I had send the data by coding the collection of objects, typed in an xml string. It all works very well.
  
  There is one problem that sometimes happens what Type constraint as ArrayCollection collection errors @ cannot be cast to collection ArrayCollection.  This problem is inconsistent because it does not produce more than once. I tried to find any model or something but couldn't.

  Possible all help to reason or solution.

  I would think that 10.1 is widely deployed this forcing of the upgrade to 10.0 in

  10.1 will not affect 95% of your users.

  The problem with having the ArrayCollection collection in the bootstrap is simply that it

  shot in many other framework classes and will primarily

  Cannot process without version multi applications.

  The alias collection ArrayCollection is: flex.messaging.io.ArrayCollection

  Maybe good for re-registration work.

  We have recommended to several people that they simply reconfigure DNS for

  have a response from single server to multiple IP addresses.  Not sure how well

  It works for the mirrors, the edge networks and load balancing configurations.

  All the worries of Flash is about if the part of the domain of the URL string

  matches.  So if you can add an entry for timeline.foo.com, you can host

  the app to www.foo.com and look for the chronology of the same server swf file to

  Timeline.foo.com and it will go in his own sandbox.  You can even have

  a way to get the ip address of the server in the main swf file and have the

  timeline.swf to load the main swf via its ip address.

  But you're right that you can not otherwise create a different securitydomain.

• Problem of using IE 8 with Hyperion Planning and workspace

  Has anyone tried using IE 8 with Hyperion Planning and workspace? I found that sometimes it has the error message and cannot allow users to log out.

  Hello
  We tried IE8 with system 11. It simply doesn't get it. IE8 is not officially supported yet. And over the years, I have learned this lesson: never use a new browser, unless it is officially in charge.
  You can find a page very useful here in this link to see what is currently supported for your release.
  http://www.Oracle.com/technology/products/bi/Hyperion-supported-platforms.html

  Alp

• Problems when using fonts Adobe Wood Type Std

  I use Adobe Creative cloud on an IMAC 21.5 "/ GT750M." Yesterday I bought Adobe Wood Type STD regular (Mac/Win, English). I installed this font by dragging on the font book. The police will appear in the menu fonts in Indesign, but most of the characters make their appearance as oval black or open rectangles with slashes. What have I done wrong? How can I get this font to work? I downloaded the wrong version for my computer/software?

  As mentioned above, they must be available in the glyphs palette in InDesign and Illustrator (Photoshop hasn't). For other applications such as Word, your download should include a Keyboard Layouts folder as a Readme file with instructions on how to install and use and an explanation of the functioning of the Pi fonts currently. If you do not have those, contact me at [email protected] to let me know and I will send them directly to you. I tested word myself and the police lists, although a little unreadable due to all the balls and ornaments in mode sample. If you view the text only menu, you should find it easily in the ', but it will not easily work in Word until keyboard layouts installed.

• How can I solve very slow scrolling with the mouse when you press the command key? (MacBook Pro, Lion, no problem when using trackpad, no problem with other web browsers, other mice have the same problem)

  Scrolling speed is fine, but when you press the command key and then it becomes very slow.

  He does it with a mouse, but not with the trackpad.
  It does when the modules are disabled.
  No problem on Safari or Chrome.
  No problem on PC.

  I think it all started when I went form a MacBook with Snow Leopard on a MacBook Pro with Lion.

  Any help would be much appreciated.

  Thanks in advance!

  You use the mouse wheel to scroll?

  There are some prefs mousewheel, which control the behavior when you press the modifier keys.
  
  You can set the key to the action of each to 0 for normal scroll.

  See http://kb.mozillazine.org/About:config_entries #Mousewheel.

• Cannot access site of Lenovo's Support with Aurora 34.0a2 while I don't have any problems when using Firefox Beta 33.0

  Try opening the Lenovo mainstay (http://support.lenovo.com) site.

  Aurora 34.0 has poster error regarding redirects by the server. There is also a hint about the possible reason being blocked or refuse cookies (I'm not 100%, what is my translation that I am using a localized version browser). Firefox Beta 33.0 works without any problem. I already checked the settings of cookies, but can not find a solution.

  Hello tjwasiak, I tried and could get the site to load without a problem. can you go through all the steps listed on the Web sites say cookies are blocked - pledge and see if it improves things?

• Problems of transfer/answering a call when using the headset with 79XX phone - CSCun26289

  Hello

  Runing on CUCM 8.6.2 and preparing an upgrade to v9, we have recently updated our IP phone firmware.

  We use the 79xx series. We have updated the firmware to * SCCP41.9 - 3-1 SR 4 - 1 s *

  We are now facing a very strange problem that is referenced in the bug below.

  When you use the helmet our users cannot transfer an ongoing call or answer a call when ther is already active.

  There seems to be a fix in 1.0000 ES27

  Does anyone know where this fixed version?

  https://Tools.Cisco.com/bugsearch/bug/CSCun26289

  See you soon,.

  Olivier

  9.4 (2) Firmware was released Friday. There is no release notes for this version, but in tests, it seems that the bug has been squashed.

  GTG