Problem whit Downgrade Probook 4540 s fron windows 7 pro, win xp pro

Similar Questions

• using Laserjet-Canon LBP 1120 printer on new HP ProBook 4350 s under Windows 7 Pro (64 bit).

  Hello everyone, I have a printer Canon Laserjet LBP 1120, I try to use via the new HP ProBook 4350 s under Windows 7 Pro (64 bit).  I tried the recommended troubleshooting options, nothing helps... Any suggestions?  Thanks a bunch

  All drivers/software from the Canon site, if they have win7 64 bit software and install according to Canon intstructions

• Problem connecting to the Buffalo TeraStation with Windows 7 Pro

  Our network has a server running Win2K AD files.  We have added a Buffalo TeraStation TS - X 2. BTA/R5 for more than a year to complete our storage.  Since that time, we had computers, Windows 2000, Windows XP Pro and Windows Vista Pro, and trendy Home and works very well with the Buffalo TeraStation.  Recently, we have replaced Windows 2000-based computers with Windows 7 Pro computers.  Everything works fine - except that they do not connect to the TeraStation.  I can ping the TeraStation.  I can see the TeraStation.  But when I click on the TeraStation to access folders and files, I get an error as follows: "the folder. \\TS-XLFAA is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The user name is not found. "All the other workstations access the TeraStation very well, because they always have.  I can't find a solution to this problem.  I tried setting the 'HKEY_LOCAL_MACHINESYSTEM\CurrentControlSet\Control\Lsa\LmCompatibilityLevel' value to 1 and changed "network security: LAN Manager authentication level" to"send LM and NTLM - use NTLMv2 session security if negotiated". as suggested by others, but it didn't work.  Any ideas?  I have several Windows 7 Pro computers that cannot access the TeraStation storage.  Help!  Thank you...

  Browsing through the posts, I found something that worked.  It was suggested to disable the use of IPv6 in network properties and use the ip address of the NAS instead of the server name.  I opened windows Explorer and typed in the address like this: \\192.168.1.11\ and the server was available immediately... Thanks CODY!

  Jim

• Problem with HP DC7800 Convertible Midtower and Windows 8 Pro...

  I installed WIndows 8 Pro on my HP DC7800 Convertible Midtower and I get the following message:

  "Intel Management Engine Interface is not compatible with Windows 8."

  Question: How can I fix and can I use WIndows 8 Pro on this PC?

  Jeff

  Thanks for your help.

  Jeff...

• 4540 proBook s: Audio Driver for HP Probook 4540 s Using Windows 10 (64-bit)

  HP has a lot of Windows 10 for a Probook s 4540 using 64 bit drivers, but not a sound driver.   Windows Media Player does not work with the driver for Windows 8.   Not only that I can not create a recovery drive, software registration system.   One of the fixes recommended on the site of Microsoft Answer is to ensure that all drivers have been updated to Windows 10.

  When HP will provide a sound driver usable in Windows 10 for the Probook s 4540?

  GorCla

  Please uninstall all IDT drivers

  Reset

  Device Manager to update the driver with windows update oben

  latest driver

  FTP://Compaq.com/pub/SoftPaq/sp63501-64000/sp63916.exe

  HP Probook s 4540 it only is currently not supported Windows 10

• HP ProBook s 4540: HP ProBook 4540 s compatibility Windows 10 (model C9K70UT)

  Hello

  I went the sitem HP (http://www8.hp.com/us/en/ads/windows10/support.html) to see if my computer is compatible with the Windows 10 improvement (I got an authentication failure the last time I tried). But the site is no longer has a field to type the model number of the computer to ensure compatibility. Please hurry! I'm short on time.

  Thank you

  Tom

  You are the very welcome, Tom.

  This happened to me on one of the PCs I've upgraded to W10.

  It will not activate.

  I restored on W7, re-upgrading to W10 and it activated successfully the 2nd time.

  I don't see why this has happened.

  I assumed that if W7 has been enabled, then everything would be fine.

  If you find that you cannot upgrade to W10, or activation fails again, please read the info on the link below to find out how to return to W8.1.

  https://support.Microsoft.com/en-us/instantanswers/1235b5b0-BF94-4B77-9CBD-1c1a8337070c/going-back-to-Windows-7-or-Windows-8.1

• Problem on HP Pavilion dv7-6c90el with Windows 8 Pro x 64 on video card

  Good evening

  I just finished installing Windows 8 x 64 Win7 Pro, I could find all the drivers for my laptop, but I have problems with the video card settings.

  My laptop is a HP Pavilion dv7-6c90el with two graphics cards, one managed by the processor, because it seems to do, and the other is normally installed on the PC.

  The cards are read by Windows as:

  Unit 1: Intel HD Graphics 3000
  Unit 2: AMD Radeon HD 6700 m Series (Microsoft Corporation - WDDM v1.20)

  the problem lies in the fact that the device must be a supported per second, or disabled, as it will not be. AMD video card must be set to 1 and the intel 2. If I go to the "Device Manager" to disable the card intel Windows, it works as if he was absent any video card, also installed driver is not correct because the card is an AMD Radeon HD7690M XT, the problem is that even if I uninstall this driver then always comes back. I also tried to download AMD Catalyst in the latest version, but can't find the card. It's as if the windows are imposed only use the unit 1, which, however, I can not disable the BIOS, because there is no voice. I note that Windows 7 had no problem.

  I ask you to help me because I need the video card for my work performance.

  Fixed the link - please try again

• Problem syncing via wifi palm tx with windows xp pro

  I had my palm tx for a couple of years and had no trouble to sync to my xp pro machine until today. I just got a new wifi-router/modem dsl from embarq (it's a ZyXEL P - 660 H - D1). I had no problem with my old wifi-router/modem dsl (D-Link DSL-G604T). They are two: 802. 11b / g I activated b and g on the new router.

  The Palm TX connects to the new router with wpa and I can surf to display web pages.  However, he doesn't "see" my office on the network. I made no changes to the my office network configurations. (The desktop is visible on the network when I use my lapto). I checked all the settings in my palm tx and my desktop hotsync Manager. I tried to connect with the IP address of the desktop computer in the Palm, but nothing works.  Can anyone think any configuration in the router that I could change to fix this?

  FYI I can synchronize using the cable, but I really prefer to use wifi for synchronization.

  Thanks for any help you can give. (I'm new to this community, sorry if this has been answered elsewhere, but I searched and could not find an answer.)

  Message relates to: Palm TX

  Hello darthemma, welcome to the Palm support community!

  It seems that you have the correct settings.  I can only suggest you do 'Static IP' for computer and TX in your router.  Who will assign the same IP address to each device at all times.

  Here is my standard "Wifi Hotsync" help file.  I hope that helps!

  WiFi HotSync with a TX

  1. on your PC, locate the Manager HotSync (small HotSync icon in the lower tray of the right tool on a Winbox). Click top and check 'Network', then click again and select Setup.

  2. choose the network at the top tab in the window that opens and locate your HotSync name in the list. Make sure it is checked.

  3. press the button of TCP/IP and look for the IP listed for "main PC address. Write it down.

  4. turn on the Wifi on your Palm and you connect to your router.

  5. on your Palm, select the HotSync program and press the word "Network" over the HotSync icon in the middle of the screen. Below, enter the IP address that you noted in step 3. (Include periods!).

  6. tap the HotSync icon big above the IP address and hang in there!

  7. If you stand and nothing happens try a HotSync cable, then retry the HotSync Wifi. Sometimes, information is to be transferred from your PC once you check the network option. Also, don't forget to watch for any activity of firewall ask you questions about "HotSync.exe tries to access your hard drive" etc. You may need to define a rule to allow him to.

  WyreNut

• ProtectTools no longer work on my ProBook s 4530 with Windows 8 Pro

  I bought this laptop overpriced for safety functions, not for a long time, but now with a simple OS upgrade Win7 Ultimate Win8 Pro security features is no longer do work, no face or fingerprint features. Any short sugestiond anther brand laptop purchase?

  Yes I tried x 64 new and old drivers...  HP s 4530 with i7

  Yes, I have a suggestion...

  The W8 software protect Tools Security Manager, face recognition software and the 4540 fingerprint sensor driver s.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-110964-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-111274-1

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5229455&prodNameId=5229457&swEnvOID=4132&swLang=13&mode=2&taskId=135&swItem=ob-112146-1

  .. .and all other stuff of security you need from there.

• Problem with stop print spooling in my Windows 7 Pro, when you use a printer HP Officejet Pro 8600 Premium.

  I dealt with this problem for weeks.  I rule the troubleshooting, and it tells me there is a problem and it is fixed.  However, I does not.  It will start printing again, but then the print spooler stops again.   Other malfunctions indicates it only a problem, but the information about the problem, will not send Microsoft.

  What happened when you tried?

• How can I solve the problems with the installation of directx on windows xp pro error

  dooooooooooooooo

  Hello

  -You receive an error message when you install DirectX?

  Your question does contain all the required information necessary for us to help you. Please include more information to continue troubleshooting as a result.

  For instructions, see Help for Suggestions for a question on forums

  In the meantime, see How to download and install DirectX

• DownGrade Windows 8 Pro 64 bit on 4540 s HP Probook Windows 7 Pro 64-bit

  Hello

  can someone tell me the correct procedure to downgrade pre-installed 64-bit Windows 8 Pro that came on my laptop 4540 s newly purchased to Windows 7 Professional 64-bit? Machine itsself comes not with any media. I also read the key is now also integrated into the BIOS. As I intend to replace the 500 GB HDD with a SSD 250 GB, I would like to re - install windows 7 at the same time. I know that you can download the vanilla windows versions 7 of m6mobile.fr and others and then install but I wanted to know if there was a formal process for HP machines. It would be also good to know that the process of extraction of the COA, so I can activate Windows 7 installation completed.

  I am based in the United Kingdom (and an employee of HP)

  (it seems I'm not the only one having this problem - I guess this method works http://www.pcworld.com/article/2015107/downgrading-from-windows-8-to-7-what-you-need-to-know.html?pa... )

  but before could someone confirm that part "call microsoft" will be ok for me if I have no physical cost... also what can I do if I have not a pro windows 7 product key to enter during the installation of windows 7 - because obviously I intend to use the rights to downgrade to windows 8 pro key!).

  advice appreciated.

  Ad.

  Ok...

  so having figured out that I can downgrade sounding MS I took the lead and mounted my new SSD drive and installed Windows 7 Pro 64 bit. Everything is good. What I need now is some of the correct drivers to get me going.

  If someone could point me to the right for the following, I'd be grateful so I don't waste time to download everything. My version is HP Probook 4540 s C4Y79EA (i5-3210/4 GB RAM/15.6 inches) model British.

  Some of the choices pilot have several versions of pointers to good enjoyed.

  It is mainly in the field of the network drivers for the Wifi and fixed ports.

  Thank you.

  I determined what hardware is in this model.

  WIFI/Bluetooth - download drivers Ralink

  Ethernet card integrated - download the Realtek drivers.

  The rest should be pretty straigtforward...

  Cheers.

• fingerprints fingerprints & brightness does not not with windows 8 build in hp probook 4540 9200 s

  HP probook 4540 s

  Windows 8 build 9200

  I detected a problem after the installation of the new operating system windows 8. fingerprint sensor does not work. After installing hp protect tool pilot there show an error message. his revealing "microsoft framework 3.5 required", but I have framework 4.5... Correct this essue as soon as possible. and another problem is brightness does not perfectly.all shortcuts keyboard not work except the brightness. and I can't reduce it manually too.my windos is enabled. and run fast on my laptop. Please fix my problems as soon as possible.

  Thank you.

  Hello thatguy2,

  Your ProBook is a business model.  Your question would better answer on the HP Enterprise Business Community Forum

• Downgrade from Windows - 8 updates from Windows-7 Pro-Windows-8 causing of programs; Troubleshooting and problems

  Dear Microsoft community team,
   
  I installed the Windows (27) - 8 and Office 2010 updates yesterday that was recommended in the notifications of security & systems.
   
  After installing these updates (27) in my HP Envy h8 - 1520t PC, my programs said crash and stop and start automatically. This has been a recurring problem with the updates of Windows-8 that I installed in my new PC.
   
  As a result, I am unable to play my favorite games, use applications and have constant program blocks.
   
  I am very disappointed with these problems. I bought a copy of OEM OS-Windows 7 PRO 64 bit and would like to downgrade from Windows-8 to-Windows 7 PRO 64-bit OS. Can you please provide me with instructions to install Windows - 7 PRO on my PC?
   
  I spent countless hours online and search for bugs on the web sites of Microsoft for Windows-8 updates of the anomalies and corrections, with no resolution. HP has no alternative but to contact Microsoft support. I can't find a link email Microsoft support anywhere.
   
  Please help me as soon as possible. Many individuals have downgraded to Windown-8 to-Windows 7 PRO with positive results on their HP Envy h8 - 1520 t PC. I never had a problem with the Windows 7 operating system.
   
  Sincerely,
   
  Paul Ferrughelli

  http://www.Microsoft.com/OEM/en-GB/licensing/sblicensing/pages/downgrade_rights.aspx#fBid=WF8U8JFesYQ

  or

  http://support.Microsoft.com/kb/2832566/en-AU

• ProBook 450 upgrade of windows 7 to windows 8

  I just bought a Probook G1 450 with Windows 7 Pro installed.

  What is the best way to upgrade to Windows 8 Pro the supplied DVD?  I work from home if higher security options is not necessary.  The HP support site gives two options - inplace upgrade and clean installation as below.

  http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/PSI/upgradeMigrateDisplay/?sp4ts.Oid...

  Also where can I find the Windows product key?

  Thank you.

  This is NOT official HP customer service and I, like most other people on this forum do not work for HP. It is a forum for users of peer-to-peer supported for class for the HP consumer products. HP maintains no official presence on this forum and it is unlikely that HP will respond in an official capacity. Response of an employee of HP represents his own opinion and not that of HP.

  Sales page of HP for HP p/n F2P35UT - HP ProBook 450 G1 States;

  "Windows 7 Professional 64 (available through Windows 8 Pro downgrade rights)
  Note: This system is preinstalled with Windows 7 Professional software and also comes with a license and support for Windows 8 Pro software. You can only use a version of the Windows software at a time. Switching between versions you need to uninstall a version and install the other version. You must back up all the data (files, photos, etc.) before you uninstall and install operating systems to avoid the loss of your data. »

  This disk is not a standard Windows installation disc and "clean" and "inplace upgrade" options do not apply. Regarding the Windows product key, it must be integrated in the HP Wndows Pro 8 installation media and Windows must be previously activated.

  If you want to reinstall Windows 7 Pro at any time in the future, you create your personal set of HP Recovery / restore before installation discs for Windows 8 Pro included disks.

  HP ProBook 450 G1 of laptop is a class computer business and as such, may be the best answer to your question in the HP Enterprise Business Community. It is also possible to contact the HP Business Support Center for assistance with your question.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation