Problem with 2nd level menu on server compared to local

My menu bar works very well in local mode (f12) but the 2nd menu level is not the case to consider when the site is published to the server. It's a spry menu. I am new and would like some suggestions - if I start from scratch. When I create a new page and insert a spry menu, it works very well so I damaged something on my pages...

This path to the SpryMenu.js is not fair. It should point to your site; not a file hosted locally on your computer.

Tags: Dreamweaver

Similar Questions

Problem with the context menu after the last update

After update of Firefox, the menu is with orders much more that before (Play, Pause, Mute etc), most of them out of context ("Open link in a new tab" when there is no link) and none of them works.

Problems with a massive menu have been reported as posed by Firebug, so make sure you update to the latest version of Firebug.
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

Problem with the levels in PSE7 adjustment layer

Hello
I have a problem with the levels adjustment layer in PSE 7.0. I made this photo that shows exactly as I want it in PSD format, but when I save it in JPG format all adjustment layers are lost. I tried to get the same result by using simple Enhance > > adjustments > > levels, but I cannot get the same result with the same settings as with the adjustment layer.
How can I solve this?
I saw in a tutorial that might help add a new layer above the layer of setting and then merge visible layers, but it does not work either.
I hope someone can help me if I can complete the picture.

It seems that the problem is that your image size is big enough in comparison to the size of your available screen and you make your settings at roughly 18% view.

Photoshop elements uses interpolation to show the images on the screen, so you can't really see exactly the result unless you view an image at 100% display (actual pixels)

If you try to do the steps from the beginning with your image at 100% view, does make a difference?

(Double-click on the Zoom tool in the Toolbox for 100% view (actual pixels))

APEX 5.0 problem with jQuery autocomplete & menu widgets

And salvation,
Previously (in TOP 4.2) I used the jQuery autocomplete widget. Now that I switched to APEX 5.0 I'm having a problem with it. I think that there is a conflict between the widget menu apex and jQuery menu widget.
I just made a new request with the new universal theme and tried to add the autocomplete jQuery as described here: https://docs.oracle.com/cd/E59726_01/doc.50/e39147/extend_app001.htm#HTMDB29026
I also added jquery.ui.menu.js because they are separated from jQuery 1.10.4.
But as soon as I add these two files on a page, interactive reports are broken a you get an error "Eception error: no such method"toggle"for instance menu widget" when you click on the button 'Action '.
Anyone has an idea on how to integrate jQuery autocomplete widget?
Thanks in advance for your help.
Concerning
Clément

Oops, I'm sorry, I missed the dependence. This makes it difficult. Unfortunately, the apex is to "blame" here for the creation of a unique widget name - only not with the game fairly limited widgets jwho that should have been possible.

Honestly, I don't see anyway "clean". I advise you to simply copy the menu and seized semiautomatic jqueryui and then change the name of the widget (in the source, mainly) to something like 'menu2 '. And then to find calls to .menu in AutoComplete to the folder and set those to menu2. I wouldn't rename the AutoComplete widget. Then put these files on your Web server, in the static files, or anywhere where you please. It's quite dirty, I know, but I think that really there is No alternative. I would not exactly change the apex after all js files...

If you be sure however to not use menu2 in altered AutoComplete file and have not renamed the AutoComplete widget, then you can in the future, if a fix was filed, simply use jquery again user interface files and just remove your references to your files customized without further delay.

You could probably connect it as a problem in the case where the devs do not notice this thread.

I'm having a problem with sharing folders on Windows Server.

Until this sharing folders to another user, I use the windows login password to access the folder

How to use a different password, if I want the user to access, but I don't want to create another user account?

I had trouble creating permissions of the user if I need to create user accounts.

With the help of Windows Server R2

Original title: sharing folder for the particular user using a different password for password sharing

Hi jytan,

Thanks for posting in the Microsoft Community.

You have a problem with sharing folders on the computer. You might have tried a number of troubleshooting steps. The efforts you have put in are commendable. I appreciate it.

I would have you post your query in the TechNet Forums because it caters to an audience of it professionals. Your question will be better addressed there.

Check out the link-

http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

We know if you need help. We will be happy to help you. We, at tender Microsoft to excellence.

Thank you.

Problems with SIP scheduling TMS > TP server

I have a problem of planning where the TMS seems to say my TP server to dial a number to the preconfigured endpoints rooms/external to H323, despite endpoints being configured only with a SIP URI and no ID of H323.

My external termination points are added as 'rooms' to TMS. They 'allow reservations' and ' allow incoming SIP URI configured dialing, but all the other slots to be unchecked. " They have no ID H323, E164, or configured firewall (gatekeeper is set to "off".

When I have distributed them in a conference, connection settings developed as 'SIP-H323"instead of just"SIP", so he tries H323 numbering first. It is a problem because many of these external endpoints are CTS-3000 units and if composed as H323, TIP does not work they only connect with a single screen.

If I manually dial the SIP from the server TP, or if I add an external endpoint to the Conference through TMS and specify SIP, it works very well. It is only a matter because TMS seems to want the MCU try H323 first, despite the configuration 'House' with no option availible H323.

It just came out recently is because we use TP Server 2.2 in conjunction with the CUBE and manually add endpoints to TP server as "legacy" systems of CTS. We're heading TP Server 3.0 + VCS - E where TRICK works automatically, but it doesn't seem to work if the call is interoperability of H323, SIP.

Any ideas how to get MSDS to compose rooms as SIP only (or at least first try SIP)?

Versions:

3.0 (2.48) Server TP

TMS 14.2.2

VCS 7.2

Hi Nick,

I had the same problem with TMS 14.2.2. I have fixed only after you have configured the 'Active SIP server address' field in the configuration page / equipment of the room. You can put any IP address in this field, any.

It seems that TMS sets TP server to call using SIP only when this field is set to the configuration / the equipment in the room, if I leave this field blank, the result will be the same problem that you are experiencing, a configuration of the connection with H323--> SIP.

Just to repeat, these are the areas that I have configured in hardware Configuration room to have work with SIP only:

SIP mode: on

Active SIP server address: 10.10.10.10

SIP URI: [email protected] / * /

Gatekeeper discovery: Off

Allow the reservation: check

Allow incoming SIP URI numbering: check

IP maximum bandwidth: 6000

You also need to set "Maximum bandwidth IP" field. If this field is '0', you will get an error message "no possible route between participants: TPserver and participating: tests.

I hope this helps.

Concerning

Paulo Souza

Please note the answers and mark it as "answered" as appropriate.

Problems with my toolbar menu and start pin

While typical work on the internet, my browser closed its own and restarted my computer. Once again, it does the same thing: closing the browser and restart. Next time, that it restarted, I got a continuous pop to the top of a windows application requesting permission to access my computer (I have never launched and continually decreased). Then I had a series of pop ups and warnings, etc.

Now, when I opened my Start menu, everything disappeared except 'all programs', 'search' and 'close '. Also, the icons located next to the time and date in the lower corner expanded how to a third party in the toolbar with no option to shrink. Finally, everything that had already been pinned to the toolbar disappeared and when I open a folder or a browser, it appears broadly and do not stack so organized, similar to how previous windows systems displays this information.

How can I find these questions to their normal state?

Hello

What antivirus application is installed on the computer?

I suggest you follow these methods and check.

Method 1:

Step 1: Restart your computer in safe mode and check if the icons are moved.

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

If it works fine in safe mode, try to perform a clean boot in order to find the root cause.

Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

http://support.Microsoft.com/kb/929135

NOTE: once you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

Accidents with internet explore, check out this link:

Tips for solving problems when Internet Explorer hangs or stops working

http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

Also perform a full service scan using the Microsoft Safety Scanner.

http://www.Microsoft.com/security/scanner/en-us/default.aspx

Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

If the method above does not work, proceed to the next method.

Method 2: Run the system restore.

Restore the computer to the date where it worked great:

http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

NOTE: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

I hope this helps!

Problem with iface on windows 2008 server

Hello. I have 2 identical servers with controller intel 80003es2lan gigabit ethernet based on supermicro x7dbu motherboad.
When iam power on my servers, all virtual machines (windows 2003, xp, linux, freebsd) start normally, but in the virtual machine based on windows 2008 network interface server is not started.
I can ping from vm to net, but cannot ping NET to vm. IAM change vm interface e1000, vmxnet2, vmxnet3 but the problem has not been resolved.
Same problem on any edition of windows server 2008 (no sp, sp1, r2, 32-bit and 64-bit) on all my servers.
Problem solved when iam remove network iface and rescan devices. I had to power on my servers. It's very bad because iam must reconfigure all the ifaces network.
How to solve this problem without inserting another network card?

Welcome to the VMware forums communities. I moved your post to the forum of the Virtual Machine and the guest operating system. > I can ping from vm to net, but cannot ping NET to vm. IAM change vm interface e1000, vmxnet2, vmxnet3 but the problem does not resolve itself by default Windows 2008 does not respond to ICMP packets. You must change the Firewall setting to enable this.

THE problem with Horizontal Spry Menu

I use a horizontal Spry menu on my new Web site of the office. In IE9, but on the subpage of the site, the submenu display strangely, fill a horizontal space rather than descend vertically. It works on the index page, and it seems to me that the divs and other circumstances are the same in each file. Any advice or assistance would be appreciated.
An example of the arrangement of the subpage: http://test.faculty.umd.edu/teach/syllabus_ie.html Hovering above the menu should show the problem.
The index page (showing how the menu works correctly): http://test.faculty.umd.edu/index_ie.html
Thank you
Rebecca

The Spry menu that is built into Dreamweaver using older code that is not compatible with IE 9. If you want to use a Spry menu, you need to use Spry Menu 2.0, you can install using the browser Widget from Adobe. See http://www.adobe.com/devnet/dreamweaver/articles/spry_menu_bar.html.

On the other hand, you might be better off looking for a different menu. There has been a lot of problems with Spry, and the framework has not been updated for several years.

problem with the spry menu bar
Hello. I'm having a problem with the submenu appears at the top of the page instead of the sub menu. I have added settings and changed % to the "ems", but still does not work. I think it has something to do with being right under the menu spry flash movie. Can anyone help? Thanks in advance.
Here is the link to the site:
link to the site
Hello

The problem is due to the
Tags that you added all through
the spry menu.
In IE, which not only align text Center but it also aligns the
- who owns.
  This changes things.
  
  First of all, change this:
  - Homepage
  - On
    We
  - href = "link_pages/services.html" > services
    
    Reservations
  - <>
    href = "link_pages/staff.html" > staff
  - Class = "MenuBarItemSubmenu" > news
    
    Events
  - Fido
    Friends
  - <>
    href = "link_pages/Resources.html" > Resources
  - Contact
    We
    
    Career opps
  To do this:
  - Homepage
  - About us
  - href = "link_pages/services.html" > services
    - Reservations
  - Staff
  - Class = "MenuBarItemSubmenu" > news
    - Events
  - Friends of Fido
  - Resources
  - Contact us
    - Career opps
  So, if you want your text aligned to Center:
  
  Change this in the sections file:
  
  UL. MenuBarHorizontal a {}
  display: block;
  cursor: pointer;
  background-color: #000000;
  Padding: 0.5em 0.75em;
  color: #FFFFFF;
  text-decoration: none;
  }
  
  To do this:
  
  UL. MenuBarHorizontal a {}
  display: block;
  cursor: pointer;
  background-color: #000000;
  Padding: 0.5em 0.75em;
  color: #FFFFFF;
  text-decoration: none;
  text-align: center;
  }
  
  I hope this helps.
  
  Take care
  Tim
  
  "rio333" wrote in message
  News:ft6src$RHS$1@forums. Macromedia.com...
  > Hi. I'm having a problem with the submenu appears at the top of the page
  > instead of the under the menu. I've added parameters and modified % to
  > "ems".
  > but still does not work. I think it has something to do with flash
  > film
  > under the spry menu. Can anyone help? Thanks in advance.
  > Here is the link to the site:
  > http:www.fidoandcompany.com
  >

Several problems with embedded DHTML menu text boxes, drop-down

We have recently improved HR 10 HR 2015. We know a menu dhtml drop-down text question existed prior to the upgrade and the upgrade did not fix it. We now have a more serious problem. We are not certain that all started with the upgrade, but we detected it after you convert our projects to HR 2015 and republish them. I list both here in case they are connected.
The problem known: styles of multilevel list to the level of the main topic and within the text box drop-down dhtml to first level. However, if we add a drop-down list box text in a drop-down text box and apply a list style at several levels to the text in the drop-down text embedded dhtml, the topic seems in good shape on the Design tab, but loses the line numbers or bullets in the preview and in the published version. No idea what would cause the list not to display properly or how to get the multilevel list styles to work in this situation? (Yes, we know we can use styles list rather than multilevel list styles, but it is problematic, too)
The novelty is that, when content is published and read in IE or Chrome (the two major browsers use customers), the drop-down text link embedded dhtml is always present, but the text in the drop-down list embedded dhtml has disappeared (for example, nothing happens when you click on the link to open the text box). It works in preview, but not when accessed through a browser (or access to the content of webhelp after publication to a server directly from my local computer). Any ideas on how to get it to display? The net result for our users, is that a substantial PART of the content of the assistance amount is now more accessible.
Thanks in advance for any help you can provide to these questions!

Here are a few things that I would consider trying.

First, click on Tools > update DHTML and let it do its thing.

A test to see if something has changed. If so, great!

If the problem persists, open one of the samples project. Click here to see a video on how to do

Then open Windows Explorer. Click here to see a video on how to do

Find and copy a file called ehlpdhtm.js and return to your project and paste this file into so that it replaces the one that is there.

Then see if things are better.

See you soon... Rick

Problem with connecting to the external server

I am currently using my iMac with Mac OS X Lion 10.7.5 2011 (11G 63). I have an external server connected to the PC of the window. I tried many times and many ways and yet the error "There was a problem connecting to the server" continues to appear.

I checked:

-IP address
-No firewall
-Access rights
-Address external & directory servers

I used my other new imac and macbook and they have no problem connecting.

Is this an error in version?

Please do help.

Read this article on the basis of knowledge of Apple, there may be something you've missed.

OS X El Capitan: connect to shared computers and servers for files on a network

Also this...

OS X El Capitan: to connect to a Windows from a Mac computer

Webview from landscape orientation to portrait mode causes the font size to become smaller and a problem with the context Menu

Hi, I have a webview with inline html. It works fine except that when I pass in landscape mode, the screen fills fine and the police grows, but when I go back to portrait fonts are tiny, even smaller then when initially in the portrait. I am installing this on a Z10 with cascades 10.1 SDK. Is this a Bug somewhere in the SDK or BB10?

Another problem I have is in Web mode, the shortcut menu appears when I touch a Word. I is no need to use the context menu. How can I get rid of him. In the case where I would like to someday use this menu, I would need to add code to it. I can't find the code. Where can I find it?

Thanks for your help

Concerning

Roland

I' to propose taying far WebView as much as possible and using TextArea (with type HTML). There are still a few bugs present in WebView that make it unpleasant to use.

You cannot get rid of the context menu, so it will disappear once you remove WebView. You can still share with other methods.

This may seem more work and it's probably, but it's going to do to improve the user experience and fewer headaches for you.

Problem with default system menu item "Switch Application"

I used the system menu item in my app screen. If I select 'Application Switch', I noticed that my app icon becomes empty. The problem doesn't stop here. If I go back to the home screen and in all cases, my icon of gets too empty.

The system has lost somehow, the application icon.

Anyone see this problem and suggestions on how to fix?

Version of Blackberry 6, 9800 Simulator.

Thank you

Sherry

So you see your application autostart - unless it is enforcement, not UiApplication. Also focus on the method of Application.acceptsForeground - you might want to tinker with it.

Check all the icons in the 'Application Switch' strip - it will be your main application with an icon as well.

Problem with the shortcut menu custom BB10

Hi all

I am currently trying to implement a context menu that is customized with my webworks app. So far I'm not creating a normal webworks / bbUI app, but I'm trying to add some features of bbUI. So to speak, I have a few different elements in my application, each of them triggers the context menu, as expected. So far so good. But now I have some problems to detect which element / div has triggered the call from context menu. How can I get this information?

I add the context menu like this:
```
var contexts = [blackberry.ui.contextmenu.CONTEXT_ALL];
var itemRead = {
    actionId: 'actionRead',
    label: 'Read Article',
    icon:'../assets/images/new/add.png'
};

blackberry.ui.contextmenu.addItem(contexts, itemShare, function(arg1) {
    console.log("itemShare: " + arg1);
});
```
But as I have already described arg1 is null, and I have no idea on how to detect the appellant.

Can someone help me, please?

I thank very you much in advance!

See you soon,.

Sven

You need the feature called custom context. This will give you that you the information on that DIV has been pressed. When you set your DIV, add a tag called:data-webworks-context

Thus your div would look something like this:
```
    1
    2
    3
```
```
blackberry.ui.contextmenu.addItem(contexts, itemShare, function(id) {
    console.log("itemShare: " + id);
});
```
You are passing a JSON for the CCM object and asking him to come back to you, the ID of the item that called the context menu, so you can do a job. Let me know if that helps

Problem with 2nd level menu on server compared to local

Similar Questions

Maybe you are looking for