Problem with iface on windows 2008 server

Similar Questions

• Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2 now not authentic

  Separated from this thread.

  Joachim

  When first pose the problem? Was it before or after the December updates?

  KB3004394 and KB3024777 appear in view update history? Or do they appear in installed updates?

  Gerry, thanks for your post. I have the same problem as Joachim started this thread. I am running Windows 7 sp1. I have a Dell computer and it's certainly a legitimate copy of Windows (confirmed computer 'properties' and it is enabled).

  By your post, I saw just to update and the KB3004394 (installed on 12/10/2014) and KB3024777 (installed on 12/12/2014) show as comfortable. I usually leave the Windows download updates automatically and I install them to stop. I watched the second update and according to Microsoft.com:

  Install KB3024777 to fix a problem with KB3004394 on Windows 7 and Windows Server 2008 R2

  The KB 3004394 update which was dated December 10, 2014 can cause additional problems on computers that run Windows 7 Service Pack 1 (SP1) and Windows Server 2008 R2 SP1. This includes the inability to install future updates. This new update is available to remove KB 3004394 from your computer.

  My problem is, as of today 14/12/2014, I still get the pop up "this computer is running not windows genuine', even with KB3024777 installed.

  Any thoughts?

  Thank you

  Bob C

  Right-click on CMD

  Click on run as administrator

  At the command prompt, type the following commands:

  slmgr.vbs - ipk xxxx-xxxx-xxxx-xxxx (to replace the specified in the current product key)

  xxxx-xxxx-xxxx-xxxx - represents your product key

  Press enter on your keyboard

  Then type: slmgr.vbs - ato (this will force the activation)

  Leave the command prompt

  Restart your computer

• I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I run a network of Windows 2008 Server r2 with a storage unit attached to the network that we put on our shared files.

  I can access the shared files of most of my computers on the domain, but there are a few that have WINXP Pro can't do. Some of the XP computers can access it, but the only people who can't are XP. I think it might be something with the local security settings, but I'm not sure. The error I get is: \\server name \sharing folder is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have permissions.  The request is not supported.   All users have permissions and can view the files from other computers just these few who have been able to do actions. Any help would be useful.
  The procedure below: the problem: give perminiant solution pls
  1. delete the field and add the domain
  2 delete the user profile, and create user profile.
  Error:
  An error occurred during connection network Y:to\\server\common Microsoft windows folder: the local device name is already in use. This connection has not been rerun.

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  It will be useful.

• Deploy Windows 2008 Server X 64 reviews of model with customization on Virtual Center 4.0 using the ESX 3.5 hosts

  Deployment of Windows 2008 Server X 64 system of operating invited by using hosts Virtual Center 4.0 and ESX 3.5 implements a message telling me:

  Cannot deploy the model: customization of the

  guest operating system "winVistaGuest" is not

  supported in this configuration. Microsoft Vista

  (TM) and Linux with Logical Volume guests

  Manager are supported only for the recent ESX host

  and versions of VMware Tools. Refer to vCenter

  documentation for taken configurations supported.

  error

  This isn't just normal? Just today I upgraded to VC4.0 to be able to deploy my new servers based on findings on this forum. And no matter if I change the Machintype Vista x 64 or elsewhere Vista32 (what is wrong of course). Any other gopt experience with this?

  There should be no need to upgrade to vCenter4 just to be able to customize a W2K8 Guest.  We vCenter 2.5 and have no problem.

  Take a look at this KB

  http://KB.VMware.com/kb/1010449

• Pavilion p7 - 1227c needs the network drivers that work with Windows 2008 server R2

  I bought this new Pavilion P7 - 1227C at Costco so that I can install Windows Server 2008 r2 with Hyper-V role

  I managed to install Windows 2008 server but unable to t the wireless or ethernet to work.  I tried to use the driver 64 bit Windows 7 without success.

  I think return Costco if I can't get the network driver that will work with Windows 2008 Server R2

  Thanks, in advance.

  Tour37

  Hi Paul,.

  Thanks for the link, I was able to download AR816X_V.0.14.15_WHQL.

  The driver works for Windows 2008 Server R2.  I just need to find the drivers for the wireless card.

  Best regards

  Round 37

• Fact informatica 8.6.1 (exit 6) supported with windows 2008 server r2

  Hi all

  Please let us know if we can install informatica 8.6.1 (version 6) in windows 2008 server r2.

  It is supported with oracle (we expect purchase license).

  Concerning

  Yes its support. but I know the reason to go with Inf 8.6.1? What would be your OLIVIER version 7962 or 7963?

• Windows 2008 server problem

  Windows 2008 Server starts providing DHCP itself after you enable the DNS suffix. How to stop the same?

  These MS Answers forums are intended for the home rather than the it professional user. Please transfer your question in the relevant Microsoft Technet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  Thank you.      :)

  (I'm sorry, but I can't move this thread for you because the two forums are working on separate platforms)

• Remote desktop disconnets after login Windows 2008 Server R2

  When I try to log on my windows 2008 server r2, it immediately disconnects with the following message remotely.

  Your Remote Session ended. The connection to the remote computer was lost due to network connectivity issues possible. Try to reconnect to the remote computer. If the problem persists, contact your network administrator. But the thing is I have other servers on the same network and I am able to connect remotely to them with all the problems. Please help me.

  FredAm

  Hello

  The question you posted would be better suited in thethe TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• UM 1.2 and Windows 2008 - Server

  Hello

  It is possible to run UM with Windows 2008 Server? It is: he runns always CWLMS 3.2 and the customer wantes to add UM. The material is not the problem.

  Yes, UM 1.2 comes with 3.2 LMS that can be installed on a Windows 2008 Server.  You don't need to install all of the LMS 3.2 to get the BUZZ.  You can simply install common Services 3.3, Deputy of CiscoWorks, CiscoWorks portal, then UM.

• Slow access to the virtual machine network (Windows 2008 Server 64-bit) Windows 7.

  Hello.

  I have a problem when you access files shared on a Windows 2008 Server 64 bits on a client computer to Windows 7. It takes a long time (up to a few minutes) to for example open a Word file from the network share. It is not always, but quite often.

  This also happens on two different servers client with almost the same equipment. Which is a basic IBM x 3400 with hard drives in RAID. I disabled the feature of unloading TCP/IP on the network inside the VM card.

  Someone has an answer for this? Have I missed something, a configuration perhaps? I'm totally lost here...

  Kind regards

  -Jean-

  Try this fix:

  http://support.Microsoft.com/default.aspx?scid=KB; EN-US; 982860

  Enrico Giacomin

• Windows 2008 Server NFS - permission denied when accessing the NFS data store

  Hello

  I'm trying to configure a Windows 2008 Server to store virtual machines on an NFS share.

  When I add the data store to my host, I have no Brown Read-only and the data store is added successfully.

  When I browse the data store, as soon as I try to delete a file or create a folder, I have an error message: "cannot delete" or "cannot complete the file was created.

  It seems to be a problem of rights NFS, but impossible to find what the problem is.

  In the/var/log/vmkernel, I see:

  Mar 23 17:43:07 vmw-esx1 vmkernel: 1:02:37:20.635 cpu4:4109) NFSLock: 2677: can't get the lock on the file new document texte.txt 0x4100070384d0 on circe (10.254.0.19): Permission denied

  Don't you have a howto use NFS with Windows 2008 to help me?  I found one for Windows 2003, but think are too different.

  Or another idea?

  See document attached with the NFS share parameters.

  Philippe

  You must configure the user name mapping in Services for UNIX/NFS and map the root user.  Detailed instructions here: http://www.sohoadvisers.com/tutorials/vmware-esxi/connect-esxi-to-windows-nfs.  I was able to implement some hosts to use my Windows NFS export, but it was a bit unreliable.  This is a configuration not supported with VMware...

  Josh

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

  Visit http://vmtoday.com for news, views and virtualization how - to of

  Follow me on Twitter - @joshuatownsend

• Windows 2008 server v2

  Hi all

  Can you help me with this? a windows logon has been deployed on my windows 2008 Server v2. and when I tried to log on to the server as admin, I get a message 'security policies on this computer are set to display information about the last interactive logon. Windows could not retrieve this information. Please contact your network administrator for assistance. Now, I can't log on to the server and everything I tried but to no avail. I can only log on locally as administrator on a client system if the virtual machine is stopped.

  Anyone can help the possible solution?

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• error on Windows 2008 server std edition "Windows could not update the Configuration to start the computer. Installation cannot continue. "

  I try to install windows 2008 server std edition on HP DL 380 G5 server, I am getting error while installing "Windows could not update the Configuration to start the computer. Installation cannot continue. ", please suggest?

  I tried also with HP smartstart CD, but failed.

  Thanks guys, I found the answer to my question, I used the last HP smart Start CD (V8.70B for windows 2008 server X 64) for DL380g5 for windows 2008 server STD, and it worked fine.

  For the Smart Start CD list visit: http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=344318&lang=en&cc=nl&taskId=135&prodTypeId=18964&prodSeriesId=345557
  Thank you...

• Windows 2008 Server R2 Std - issue of Best Practice Analyzer

  Windows 2008 Server R2 Std - question BPA
  I built a new Windows 2008 R2 Standard Server and configured as a domain controller. When you run the BPA I get the following error, which I can not solve:

  Question:
  The default domain controllers policy is not in force on the OR OR = Domain Controllers, DC = WRIGHT.
  Impact:
  If the Group Policy settings that are defined in the default domain controllers policy are not applied to domain controllers, Active Directory operations may fail.
  Resolution:
  Link the default domain controllers policy to the ORGANIZATION OR unit = Domain Controllers, DC = WRIGHT

  The default domain controllers policy is linked to the domain controllers OU. I dun dcdiag and the only failure is NCSecDesc but I don't plan to add an RODC to the forest. When I run the resulting strategy game I can see domain controller policy has been applied.
  Is there something I can do to clear this error message?

  Hello Lynn Furlong,

  Microsoft Communities is for consumer issues on Windows 8, Windows 7, Windows Vista and Windows XP. Your question deals with Windows 2008 Server R2, it would be better to post your question in the forums TechNet for ITPros.
  Click on the link here to transfer your question in the Forum Windows Server 2008 Group Policy. They will be better able to meet your group policy do not apply to domain controllers.

  Sincerely,

  Marilyn

• How to set group policies in windows 2008 server for office plexi

  (1) define us group policy for wallpaper of Windows 2008 Server and pushed to all desktop computers.

  (2) but the desktop icons, we receive with blue background.

  (3) how to remove the blue background and make plexi icon.

  (4) I want to know what the Setup program needs to be done to get the icon of plexi in group policy in windows server 2008 standard.

  Hi valerie,

  The Microsoft Answers community focuses on the context of use. Please reach out to the business community of COMPUTING in the TechNet forum below:

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb310558.aspx