Problem with a field display only based on a dynamic LOV

Similar Questions

• Problem with images not displaying only not the landing pages with IE8

  We had a page that has been tested and seemed well, and when it was used as a landing page for the tactic today, one of the images does not appear in IE8 (the red x).  Other images will display correctly, including the different file types.  In addition, the same image that does not appear in IE8 is displayed in Firefox, Chrome, and IE10 (other browsers have not been tested yet).  Eloqua support had other suggestions for re - download the source image... This does not resolve the issue.

  Everyone knows about this problem?  If so, do you know a solution/fix for it?

  OK, we just found this... turns out that this particular image had been saved as CYMK, RGB in Photoshop not.  When it was changed to RGB, it worked.

• Problems with the screen resolution, Cloud based software and Photoshop after the last round of updates Windows 8.1.

  Original title: screen resolution problems.

  Since the last series of Windows 8.1 update the resolution of my monitors has been changed for the worse. I use an AOC 2367 M (resolution 1920 x 1080) as my first monitor and a 42 inch Sony Bravia (resolution 1920 x 1080) as my 2nd monitor. The changes are more noticeable on the Sony Bravia and any adjustment I make to the resolution only make worse it.

  I also have problems with some software clouds as I load using citrix and when I try and navigate once opened software, I can't because the pointer selects a point about 50 mm on the side of the where he is hovering. In fact it is very difficult to open and close as anything and I resorted to the laptop to get concrete results.

  Photoshop now also comes up with a message when I open it up to inform me that the monitor profile seems to be defective.

  Any suggestions would be helpful as I thought initially an another upgrade must follow to correct the ills of windows 8, but appears not to have happened.

  Hi Joseph,.

  Thanks for the reply.

  Method 1:

  I suggest you to download and install all Windows updates available including optional updates. You can also install the latest device drivers for all devices including display drivers and monitor drivers on the manufacturer's Web site.

  http://eSupport.Sony.com/Perl/select-System.pl

  http://www.aocmonitorap.com/root/ANZ/download_driver.php

  Method 2:
  Adobe Photoshop CC version 14 is compatible with Windows 8.1. See Windows Compatibility Center for more information. To solve the problem with Photoshop CC, I suggest you try the procedure described in the article and see if it helps.

  Cloud applications help creative /CC crash immediately after launch
  http://helpx.Adobe.com/Photoshop/KB/CC-applications-crash-immediately-launch.html

  If the problem persists, I suggest you to contact the Support from Adobe.

  http://helpx.Adobe.com/contact.html

  To solve the problem from software hosted accounts, you may need to contact the Support to count.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Field read only based on the authorization form

  Hello
  
  I have a field in a tabular presentation read only based on a permission scheme, as you can for a field in the region with the help of a condition of PL/SQL. Is it possible to do this?
  
  See you soon,.
  Andrew.

  Hi André,.

  Caught this idea,

  Please create a plus column within the report using as "alaisecolumnname" then

  column with editable text for authorization schema [ISADMIN] box
  draw sheet column with displayonlytext for authorization shcema [NOTISadmin]

  I hope that it will match your expected results, I tested it in my workspace works very well for me

  Thank you
  Select this option.

• I have problems with my internet connection only, it keeps freezing and then ask 'end now' and give me and error report. How can I fix it?

  I no problems with any other part of my computer this. I spoke with the standard of the internet, and they said it was something wrong particular to my computer only.

  Hello

  -Did you change on your computer before the show?

  Follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode with network and check if that helps.

  Step 2:

  If the Internet works in safe mode with networking, I suggest you to start your computer in a clean boot State in order to eliminate conflicts of third party software.

  Note: The steps in the article to restart your computer as usual.

• Pavilion dv4-2170-us has problem with connection light display

  The cover on my laptop seems to have a bad connection, because I have to play with the angle to get the screen to

  show anything.  Sound very, very delicate.

  Is this something that can be fixed by a tech or should I get a new laptop?  I'm asking because there is another nother

  problem with function of my computer.

  HI @compugirl ,

  I understand this thing you display may have a bad connection that you have to play with, then fish on the screen to show the line.

  Want to know if this could be fixed by a tech.  The short answer is Yes.  Here is a link to 2009decembre 17 December 17, 2009 HP Pavilion dv4 Entertainment PC Maintenance and Service of Guide. Please note Chapter 3 page 3 for a list of the replacement screens supported by number of the part.

  It may just be a connections loose as you said, either a bad connection cable...  The cable may have become defective through the opening and closing of notebook, during normal use.  Please note Chapter 4 page 27 for the removal of the screen procedure.  Before considering the replacement of the screen, I would try a new cable first to exclude it.  You should be able to buy the cable to any computer supply store.

  I hope this has helped.

• Problem with Voddler: the video only in green tones.

  Hello

  I have problems with Voddler (Beta), a movie streaming program: movies play in green and white tones only.  I have a Sony VAIO VGN-250E with an Intel 945GM video card Express Chipset Family running Vista Home Premium 32-bit.
  First of all, Voddler people told me that my video card must support OpenGL 1.4 and I want to update my graphics driver. I did it with the VAIO Update, Windows Update, and directly by the Device Manager and I already had the latest version, so this solves nothing.
  Secondly, I tried Sony, but it was useless. They have not even say if they knew what the problem was.
  Third, I decided to follow this suggestion: http://www.schwarzsoftware.com/ctips/openGL/openGL.html. Basically, I tried to install the generic Intel driver but the computer won't let me. Whenever I try to say to install the software driver for the specific folder where I put the driver generic Intel it tells me I have already install the driver known.
  Does anyone have any idea of what is happening here? I don't know much about OpenGL and everything out of the stuff, and I just want to watch movies!

  see you soon

  Apparently, the program that I am using (Voddler) only supports the ATI and Nvidia graphics.

  I give up...

• Problem with Spotlight fields with the higher priority than browserfield

  It comes to JRE6.

  Some Web sites make a redirect of content or another ajax request when the document is loaded.  When the screen contains a browserfield and a focusable field with a higher priority, an illegal state Exception is thrown by the browser because it is not to the point when the content refreshes the field.  (As in defining BrowserField.setFocus () before calling BrowserField.refresh ()).

  Example: http://supportforums.blackberry.com/t5/Java-Development/BrowserField-Sample-Code-Create-your-first-B...

  Using the code of the BrowserField2 example, simply by adding a ButtonField in the survey except title when navigating to twitter.com.  Other sites work fine, but when the content/javascript is in a certain way on Twitter, she seems to have some problems.

  package mypackage;
  
  import net.rim.device.api.ui.component.ButtonField;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.browser.field2.*;
  import net.rim.device.api.ui.*;
  
  class MyBrowserField2Sample extends UiApplication
  {
      private MainScreen _screen;
      private BrowserField _bf2;
      private ButtonField btnField;
  
      MyBrowserField2Sample()
      {   
  
          btnField = new ButtonField();
          btnField.setLabel("A BUTTON");
  
          _bf2 = new BrowserField();
  
          _screen = new MainScreen();
          _screen.setTitle(btnField);
          _screen.add(_bf2);
          pushScreen(_screen);
  
          _bf2.requestContent("http://www.twitter.com");
      }
  
      public static void main(String[] args)
      {
          MyBrowserField2Sample app = new MyBrowserField2Sample();
          app.enterEventDispatcher();
      }
  }
  

  The code above throws an illegal state exception at startup.  If you delete the setTitle (or any field focusable) that has a higher priority than the browserfield, so it works well.

  How can I force the focus on the browserfield when she needs?

  I Googled, found issues similar and all say "force focus on the browserfield", but even if you force the focus, the same illegal state occurs due to the updating of the content.

  Thanks in advance,

  Nate

  After reviewing the matter further, the problem may be to the field focusable, but it doesn't have to be on top.  Basically, any field focusable on the same screen as the browserfield throws the exception.

  While going to twitter.com in blackberry browser works very well (sends you to the mobile site), this behavior causes problems with the browserfield.

  The workaround, is just to force the link to open the mobile site directly.

• Problems with CDM - Tracert displaying a line and connection with FTP problems

  I am currently in a class of networking and server, so am pretty new to this.  I'm running a virtual PC with Windows 7 Professional 32-bit and a few problems with my command prompt.  When I use the tracert command, any URL that I use, it returns only a single line.  It also does not matter whether I run it as administrator.  Here is an example of what it returns:

  I also have problems to connect to a server by using FTP.  The mission was to connect to the FTP server of NASA and practice to transfer images on.  I am able to connect, but as soon as I use the 'ls' command that I am, it will expire or say "connection closed by remote host". I encountered this same problem on my PC at home on a regular basis as well.  I used a computer friend, followed the exact same steps and it worked very well on his own. Here's what I saw:

  Any help would be appreciated.  Thank you!

  Hello

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums.

  I would recommend posting your query in the link below.

  Windows 7 networking:

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Problem with the connection works only not with the caterers

  I have a weird problem with logging, and perhaps someone here can point me in the right direction to watch. I have install a FileHandler customized for different newspapers. He worked for a few years. Now it no longer works. Nothing is found in the log file even if it is created.
  
  I have narrowed it down to there's a change in the JVM. If I run application under JDK 1.6.0_05 (what I had in production), it works. If I run the current JDK 1.6.0_22 application, it does not. This is on Solaris 10 and the only change I make is to change the symbolic link 'later' in ' / usr/jdk "to a JDK version or the other. It is reproducible 100% of the time. Use the old JDK and it works, use the JDK again and it's not.
  
  I'm at a loss as to what could be wrong.
  
  Here is the code which implements the Manager and associate it with the newspaper:
  
  Recorder L = Logger.getLogger (loggerName);
  If (null! = level) {}
  l.setLevel (level);
  }
  System.out.println ("logger level is" + l.getLevel ());
  If (null! = useParentHandlers) {}
  l.setUseParentHandlers (useParentHandlers);
  }
  String loggerPattern = logDir + reason;
  Manager: new = FileHandler (loggerPattern, limit, count, append);
  h.setLevel (Level.ALL);
  Formatter F = new UniformLogFormatter();
  h.setFormatter (f);
  l.addHandler (h);
  Logger.info ("FileHandler added [" + loggerPattern + ",]" + limit + "," + count + "," + add + "] for logger:" + loggerName);
  l.info ("open log file");
  
  I see the 'open log file' but never to see any other message of the breast journal. The "server.log" sees the messages, however.
  
  Any help will be greatly appreciated.
  
  Brett

  At one point, the internals of the LogManager/writer classes have been modified so that they maintain WeakReferences for child loggers. My guess is that your code is not keep a hard reference to the logger which you set up and it becomes garbage collector more later in time (and so do not have all future messages).

• Problems with form fields

  Hello!

  I use Adobe Acrobat Pro (version 9.2.0).  I'm an avid user, and recently I started to have problems with the form fields (text, list box drop-down list, check mark, ect.).  When I go to applications-> add or edit fields and try to move ONE of the fields, they move sporadically.  I thought that maybe it was my mouse, so I tried to move it with the arrow keys, and then it does the same thing.  Sometimes I have to just move the field by a hair, and it clearly moves across the page!

  I asked my people to TI, and of course this isn't their specialty, so we're trying to think of what it is NOT!  I really need this to get back to normal, because I've created forms throughout the day.

  Please, any help would be greatly appreciated!

  "Did you accidentally set the ' snap to grid ' option?

  You can also try to "fix".

• How to fill a field read-only based on selections from 2 DDlists?

  Follow-up question:

  http://forums.Adobe.com/message/2417876#2417876

  I have 2 drop-down lists.  'Department' and 'unit '.

  The selection in DDlist 'Department' creates a single list in DDlist 'unit '.

  I select the appropriate of these two DDlists elements.

  When I do this, I want the text read-only 'NameOnIDBadge' field is filled with a predefined entry.

  Example:

  In DDlist "Department", select the item «Finance & Administration»

  In DDlist 'Unit', select the 'Food Service' item in the list that appears

  THEN:

  In the text field read-only 'NameOnIDBadge' of the following built-in read-only text appears: "contract food serv.»

  (Thanks to Paul, I already know how to do selection in DDlist 'Department' affect the selection list in DDlist 'Unit')

  "but I don't know how to make the choice of these two DDlists to create a new entry in a text field).

  I have attached a mock-up of the file that I work with...

  If ((firstDDList.rawValue="Whatever") & (secondDDList.rawValue = 'Whatever'))

  yourTextBox.rawValue = "the text on the right"

  This code would go under the second output of DDList event, replace the code I put in there to add the control to the first DDList

• Problems with the retina display resolution

  Hello

  I have a macbook pro (2015) with a retina display 15 "that I can't seem to adjust to the correct resolution. The native resolution, as I understand it, is supposed to be 2880 x 1800. I can't see my resolution when I put its "default value to display" in system preferences, but if I change it to "scaling", it is said that the default resolution "looks like 1440 x 900". Even when I go to the maximum the space option, it doesn't give me that 'looks at 1920 x 1200.

  When I up resolutions for the screens of the retina, it looks like the scale at 1440 x 900 option is supposed not to be available for the 13 "display.

  

  

  The native resolution is not supposed to be available in the options when the scale is selected. What you need is respectful of the eye from the App Store, which will increase the resolution above the option 'More space' completely in the native resolution.

• Problem with the site display in IE

  I'm trying to put together a site (www.4keys.ca).  Everything works well in Firefox, Safari, and Chrome, but when I try to see things from IE to jumble.  I've set up my Mac computer's site. Anyone know what could cause this problem with IE and how it can possibly be solved?  Thanks for your time.

  See no difference, it comes out the same in Explorer, probably a version pb... but you should really try and use div instead of table and have your css in a separate file, it will be much simpler and to highlight the issues less browser

• Data palette displays only not Beans managed Dynamic Web Project, JSF 2.1

  Hello.
  
  I have a problem in EPCO (EPCO-juno-distro - Win32.zip), where the data tab, in the Palette shows no Beans managed,.
  even though I've created in the servlet in faces-config. XML using the faces configuration editor.
  
  I created a dynamic Web with these facets project:
  Dynamic module Web 3.0
  1.7 Java (JDK 1.7_21)
  Support for processing Java Annotation 5.0
  JavaScript 1.0
  JavaServer Faces 2.1
  JSTL 1.2
  Oracle WebLogic Web App Extensions 12.1.1
  
  I use the distribution of zip 12 c 12.1.1 Oracle WebLogic Server to host the application.
  
  For example, I have a UserBean Managed Bean in Session scope, which has 3 fields of type string
  and the respective getters and setters.
  I create a file 'test.jspx' and palette-> tab-> JSF HTML I drag a form in
  the new file so I can connect to UserBean and generate a form to enter the details.
  I select the "generate a form tag and data content' and in the dialog box choose beans
  There is none of my beans.
  
  What could be the problem?
  
  Thanks in advance.
  
  Published by: 997841 on April 30, 2013 18:09
  I forgot to mention the WebLogic Web App Extensions version 12.1.1 Oracle and who also
  for JSF 2.1 Configuration Faces "subfolder" below the project in the Project Explorer is not
  non-existent, as in projects created with earlier versions of the JSF.

  Ok. We took another look at it and I think we found the problem. There is a problem with our support for JSF 2.1 in EPCO 12.1.1. This will be fixed with the version of EPCO delivered in tandem with the next version of WLS (12.1.2) that we support.

  In the meantime, if you use the JSF 2.0 instead of JSF 2.1 facet it should solve your problem. The problem with Java 1.7 looks like it may have been a Kipper.

  Unfortunately, there is no way to downgrade the version of 2.0, so you have to re-create the project. Sorry for the inconvenience. You should still be able to use libraries of 2.1 (if you want) even when the 2.0 facet is active because there is not much difference between the versions of the point of view of the tool.

  Thank you for taking the time to keep up with us and we help to find this problem.

  Thank you

  Cameron