Problem with an xpath expression

Similar Questions

• Could someone explain to me what is the problem with this refined expression?

  Hi, could someone explain to me what is the problem with this refined expression

  faultCode:Server.Processing faultString:' unable to invoke CFC - regular expression malformed ' ^ [0-2][0-9][/][0-1][0-2][/][1-2][0-9]{3}+$ '.»»

  Thank you

  I think that the + should not be there. Do you have a match?

• Problems with mail/outlook express

  I use XP Pro 2002 SP3 and Outlook Express 6 on a PC of Prion.  It worked perfectly fine for years. However when I try now to open OE arrive a few different things: -.
  1. opens OK
  2 stands on "allow". Connection window will appear - when I click OK it disappears for a second, then re - will appear, and you receive error 0x800CCC92 No. message and error in r.h.corner.
  3. It also happens after that I was connected successfully.
  4. If I "Create Message" and send it (as "Error" is displayed) the message is sent and received new messages are either he starts working again!  Until he came again.

  I talked with my server several times and checked that my settings are correct. I use Avast Anti-virus (no problem for several years).  My server suggested that turn off and try again - it made no difference.

  I recently bought a new laptop with Windows 7. This disconnect makes no difference.  I don't have Outlook Express installed on the laptop.

  gwebros

  Hi gwebros,

  You can check if this article helps.

  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express

  See also:

  Outlook Express and Outlook repeatedly ask for your password when you check messages on an Exchange Server computer

• problem with express mini pci wireless lan card. I can't connect to internet via wifi but I can connect to the internet via cable.

  Hello! I have a problem with my card express 11 b/g/n wireless lan mini pci because I can't connect to internet via wifi but I can connect to the internet via cable. whenever I try to connect it repeat to myself that there is a problem with your wireless network card. I tried troubleshooting, uninstall and reinstall the program, but always the same result. I'm updating too but still the same thing. I use a windows 7 Professional on my Lenovo 412. can someone help me? Thank you!

  Hello

  Method 1: I suggest you to follow the instructions of the link to solve the problem of network card:

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems

  Method 2: Troubleshoot wired and wireless in Windows network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Reference: http://forums.lenovo.com/t5/R-and-L-Series-ThinkPad-Laptops/L412-Wireless-Automatically-Disables/td-p/264447

  You can also post your question in the forum of Lenovo to get help:

  http://forums.Lenovo.com/

• Problems with Outlook Express (address book, mail open, etc.)

  Hi, I have a strange problem with my outlook express. The program opens ok, it synchronize the e-mail with the servers and so on. If you click on an email in the upper part of the window you can see the content below.
  Now, this is my problem, I can not doubleclick on an email to open it, I can't send an email or forward it. I can't open the address book.
  I get different messages, "it was not possible to open the address book, it cannot be installed correctly", "the message could not be opened, an error has occurred", "it was not possible to load the due address book that Outlook Express is not properly configured. Reinstall Outlook Express"and so on.
  I used this software for many years and the problem came from one day to the other. I tried to uninstall/reinstall the program from the Control Panel, I did a repair on XP installation, but it is always the same, is there anyone who has an idea (I know that Outlook Express is and old program, but it works very well for my needs).

  What about Nils

  First, try a new identity and see if that helps.

  You may have a damaged identity especially if it's the default main identity. File | Identity | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

  How to create and use identities in Outlook Express
  http://support.Microsoft.com/?kbid=209169

  An Outlook Express basic repair kit:
  http://www.Microsoft.com/Windows/IE/community/columns/oerepair.mspx#ehh

  **************

  If the problem persists, start looking here.

  All of these errors have the same cause.  Something is screwed up with your address book.

  It could be several specific problems, which include:
  -corrupted WAB file
  -damaged or incompatible DLL files for the addressbook
  -have OE set to use the Outlook98 / 2000 + contacts instead of the WAB
  folder and there is something wrong at the end of Outlook

  For more details, take a look at:

  Error message: the Message could not be sent. Some invalid recipients
  (Outlook Express: there was an error opening this message)
  (The address book failed to load. OE is configured incorrectly)
  (Corrupted or incompatible WAB32. DLL file)
  http://support.Microsoft.com/?kbid=239135
  OLEXP: Error Message: failed to load address book
  (There was an error opening this message)
  http://support.Microsoft.com/?kbid=269777
  http://support.Microsoft.com/?kbid=310873
  OLEXP: MSIMN has caused an IPF in Module Wab32.dll
  http://support.Microsoft.com/?kbid=247706
  Error message: failed to load address book, Outlook Express is...
  http://support.Microsoft.com/?kbid=191946
  Error message: could not open address book, a component is missing
  http://support.Microsoft.com/?kbid=192321

  The address book Windows (WAB)
  http://www.insideoe.com/files/WAB.htm

  To share Contacts between Outlook and Outlook Express
  http://www.slipstick.com/contacts/oeshare.htm

  Bruce Hagen MS - MVP [Mail]

• Problem with PCI Express Root Complex

  I bought a hp 15 t - j100 with Windows, but on windows 8.1 8.1 but I needed to change windows 8 and now I have a problem with the PCI Express Root complex code 28. The disks I have download for hp of the site http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4158&lc=en&cc=us&dlc=en&sw_lang=&product=6521...

  I need help to solve this problem

  Thank you

  and I'm waiting for help

  Hello:

  You need this driver...

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-124661-1&cc=us&DLC=en&LC=en&OS=4063&product=6521374&sw_lang=

• Problem with regular Expression

  Hello!!
  I have a problem with the regular expression. I want to validate only one word, and second are the same. To do this, I wrote a regex
  
  Model p=Pattern.compile("([a-z][a-zA-Z]*)\\s\1");
  Matcher m = p.matcher ("nikhil nikhil");
  Boolean t = m.matches ();
  If (t)
  System.out.println ("it's a game");
  on the other
  System.out.println ("is no match);
  
  The result I get is always 'there no match. "
  
  Your timely help will be very appreciated.
  
  Concerning

  Hello.

  You are missing a slash in the regex

  Pattern p = Pattern.compile("([a-z][a-zA-Z]*)\\s\\1");
  Matcher m = p.matcher("nikhil nikhil");
  boolean t = m.matches();
  if (t) {
      System.out.println("There is a match");
  } else {
      System.out.println("There is no match");
  }
  

• APEX 5 - problem with computations in applications.

  Hi experts,

  I am facing some problems with calculations and expressions too.

  I have two EPS. Dev and Prod (4.2). I upgraded to 5.0 apex in the dev environment.

  After a few don't test with applications no DEV I have problem with computation - nothing is changed in both of the approx.

  For example: I use point computation to only display the sysdate value - 10 after a label. (some info default filtering).

  On prod ENV everything works OK - value appears when I reference by + ITEM.

  This same article on DEV invariably shows nothing. There is no error in the LOG.

  PROD:

  

  

  TEST

  

  

  Is there a difference any to save the session state for items? Before that the regions are displayed?

  I have same problem when I want to use certain conditions to show some ITEMS/REGIONS/DA... where some ITEM_VALUE is used.

  I tried the same thing on apex.oracle.com.

  For EXAMPLE:

  Some button should only appear if a page element value is not zero (: P_ITEM is not null). (I tried DA or simple condition - screenshot below)

  He worked in APEX 4.2 but not in 5.0 for me.

  If I use PL/SQL Expression and type "1 = 1", everything works. But I need the old feature where I can use the comparison of point values page.

  This does not work for me in the Page load DA. It has never triggered.

  

  I work with APEX about 6 years, but I have never seen this.

  Concerning

  J

  Hello

  I don't know if I understand your DA it checks the P1_TEST "is not zero", but this element of the page is set anywhere on your page, then this condition DA won't be ever true. For your calculation, the calculated value is correctly displayed next to your agenda of the P1_DATE_FROM page. I'll have a look at what is happening with 'SQL Expression. But please be aware that this is just a warning in the Page Designer, you will still be able to use "SQL Expression".

  Concerning

  Patrick

• Strange problem with Toshiba Express Media Player on Satellite M115-S3094

  I am facing a strange problem in my Toshiba M115-S3094, which has been pre-installed with Windows XP Media Center edition and which also had the Toshiba Express Media Player.

  I had already done a clean install of Vista on it, and then I decided to go back to XP with my recovery DVDs. I did the same procedures of first installation Express Media Player to backup (that I did when I bought the laptop) and then installing Windows XP DVD de Toshiba Recovery XP.

  The steps included:
  1 deleted recovery Express media player disk partitions
  2. installed express media player
  3 extracted Xp Recovery DVD, by selecting 'Recover without changing the Partitions' (there is no expert mode)

  Everything was fine (i.e. installation)... But now, after the turning off my laptop I press the Express Media Center button, the logo "Express Media Player" appears on the screen after loading of closures of laptop for 5 seconds.

  I tried to open it again and again, but the logo is displayed for 5 seconds and then my laptop stop...

  Laptop works fine when I connect to windows by pressing the power button / stop.

  Can someone help me on this strange question... ?

  Hello

  The whole story is a bit confusing
  First of all, I would like to know if your laptop is already preinstalled with the Media Express Player and if you were able to use it on your laptop in the past.

  Now something about the Express Media Player installation;
  In order to use the media functions Express the Mediaplayer Express Recovery CD must be performed before performing the recovery from the recovery DVD-ROM products.

  In addition, on the HARD drive should at least 150-200 MB of free space available.
  This free space must be on the end of the HARD drive and there must be unallocated. To get these free space on party products 3rd HARD drive should be used as Partitions Magic 8.

  I m not 100% sure that on error ID system badly but maybe it corresponds to the DMI evil information stored on the motherboard. If we're not DMI, you will not be able to reinstall Express Media player using the recovery media express CD.
  In the DMI must be set properly the manufacturing: Toshiba, product name: for example by Satellite M115-S30

  Finally and most importantly, I found this thread useful forum on the Media Express recovery procedure:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=51801쩙

  Could be useful for you!

• WiFi problem with iPad 4 on first generation Airport Express

  Bad problem with iPad 4 / iOS9. It seems that it is connected to the wifi (my old airport express of first-generation lists my iPad as a connected device and in settings of the iPad, the connection has the usual blue tick). BUT Internet works only for a few seconds after a reboot (hard) and there is no icon of wifi signal on the status bar (to keep for the first few seconds after the eboot). All other devices (iPhone 6 on ios8.2, iPad 2, two Macs and a PC) work fine on the airport express (first generation). Stranger still, when I go into a public café with wifi on the road, the iPad 4 connects no problem at the station, on the status bar and the internet works, I see the usual wifi antenna icon. Final oddity, it suddenly stopped working and no software / firmware updates between the two. As mentioned, soft and hard that it recharges don't help in saving a few seconds DNS cannot be a problem because all other devices work correctly.  I also tried to reset the network settings. It is esoteric.

  As a test, temporarily change the wireless network name and password on the AirPort Express.

  Make the name of... well very simple wireless network, no special characters (like an apostrophe) and no space empty. Ditto for the password.

  Can the iPad4 connect that way?

• Problems with the help of control Edit Expression with tab control

  Hi all

  I am facing a strange problem when using Expression Edit Control with a tab control.

  When I put the Expression of the RichEdit controls on several tabs in a tab control, and when I run the application, the Expression Edit controls in a single tab are visible, others get invisible! I do NOTHING with them, but they do not simply show upward!

  I first faced this problem using Expr editing controls in Visual Studio c#. NET - with tab controls. For verification, I created a simple VI is LabVIEW to see if the problem is with my request / problem with Expression Edit controls in c#, etc. But voila!  A similar behavior in LabVIEW too! 

  I'm doing something wrong? OR do not do something right? Ask someone for help please ASAP!

  Thanks a ton in advance!

  DASI

  PS: Attached the VI here (LabVIEW 8.5) just download and run it, and you will see probably what I'm talking about!

  
  

• Select the problem with expressions

  Hello

  I use Teststand 4.0 and a frustrating problem with the Select Case statements.

  I have attached a sequence that shows the problem.

  A loop from 0 to 10.

  The select case statement should decide which box 3 instructions corresponds to the expression and a message box is displayed.

  However the Basic program reacts as expected.

  First, he made his entry with a value of 0, it goes to the > 7 stated case.

  The second time, he enters the loop with a value of 1, it will correctly to the<3 case="">

  The other values of 2 to 10 enter no case statement.

  Is this a bug in TS 4?, or I do something wrong?

  Thank you

  Mike

  The problem is that you compare the Locals.New_Val of the Locals.New_Val property.< 3". ="" if="" those="" two="" properties="" match,="" then="" it="" will="" execute. ="" if="" you="" wanted="" that="" particular="" case="" to="" execute="" when="" locals.new_val="" is="" 0,="" you="" would="" just="" type="">

  Unfortunately there is no way to have multiple cases of a single block of code.

  In C, you could do it like this:

  Switch (newVal)

  {

  case 0:

  case 1:

  case 2:

  do something

  break;

  case 3:

  case 4:

  case 5:

  case 6:

  case 7:

  do something else

  break;

  etc...

  }

  Even in C, it's awkward, and you would probably do the following instead:

  If (newval<>

  do something

  Else if (newval<>

  do something else

  on the other

  do something else

  The reason why it works in TestStand, is that expressions will try to automatically convert types if she can do it.  false is logically equivalent to 0 and true, it is logically equivalent to 1, so what you are really comparing to in your case statement is your property (Locals.New_Val) to a Boolean expression that evaluates to 0 or 1.  It is certainly not obvious when we look at, but at least, this explains why it happens.  Another way, you could do this is to change "Point to compare" step of the 'True' selection, which will each case in order to compare the expression of the value 'true '.  I still recommend a structure if/else if/else for this kind of problem because it's easier to read, but it is possible to do what you want in this case with a select / box.

  P. Allen

  NEITHER

• I am having problems with getting my Outlook Express 6 to hang with my hotmail account.

  I get an error Ox8OOcccOD code, hotmail server is not found.  I had windows mail and had problems with my computer and my son uninstalled and reinstalled everything on my computer, and Outlook Express 6 has been installed.  Can someone give me a help as how to connect to hotmail account right.  I tried almost everything.

  Thank you

  Hello

  You can check these links:
  How to configure Outlook Express to use a Hotmail account
  http://support.Microsoft.com/kb/220852
   
  You receive an error message when you use Outlook Express or Outlook to access your Hotmail account
  http://support.Microsoft.com/kb/878462
  
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514

• Problems with Outlook Express 6 in Windows XP

  Dear Sir or Madam:

  My friend has problems with his program of Microsoft Outlook Express 6 on Windows XP computer.

  He has saved all his program of Microsoft Outlook Express 6 e-mail messages.

  There are 2 e-mails corrupt in its Outlook Express 6 Inbox folder; He tried opening and remove these 2 emails corrupted in the Inbox folder, which causes the Outlook Express 6 program stops responding and freeze-up Windows XP. He had to click the end task to close immediately the program Outlook Express 6 is not responding in Windows Task Manager.

  It won't reinstall Windows XP on his computer from scratch.

  Please reply back soon.

  Thank you.

  Same question as above, except the deleted items that is now corrupted. Follow the instructions above, but this time remove Remove Items.dbx with OE closed.

  With all the corruption, you might want to consider a new identity that will give you all the new dbx files and a new registry hive.

  File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.

  Note: Do not use the main word in the name of the new identity.

• I am having major problems with my emails. I can send emails OK but I can't receive them. I use Outlook Express.

  I am having major problems with my emails.  I can send emails OK but I can't receive them.  I use Outlook Express.  When I first turn on outlook express, emails start coming, but then outlook express crashes.  I disable outlook express and start again. My emails are stuck in the Orange webmail box until the last email is downloaded.  This means that I sometimes get the same time to send four or five. I called technical support Orange several times, but they say it's a problem of microsoft. I use Windows XP.

  original title: I can't receive emails from outlook express.

  Hi Mike,.

  Make sure that you have not activated your antivirus software analysis of electronic mail.  See www.oehelp.com/OETips.aspx#3 which is often a problem with receiving and sending a message.

  Then, try to go to file | Identities and setup a new identity.  This will give you a new message store and a new registry hive (where all the settings and account info is).  Add your email account and see if it works very well.  If it sticks sometimes, make sure that you are not setting to check messages too often (like every 3 minutes or somesuch).  You can also try to increase the timeout for the server where this is a problem (Tools |) Accounts | Mail | Properties | Advanced).  See if who deals with issues "" OE gel.  If Yes, then you can use the file | Import | Messages to bring them from the old identity.

  I do not know that moving to Outlook might solve the problem, because they both use the same mechanism to retrieve messages.  If you still have problems, come on and generate a log file and when OE freezes, which could give some indication of what is the underlying problem.  Make sure that you disable the log file later, because this file grows enormously and can cause problems if it becomes too large.

  Steve