WiFi problem with iPad 4 on first generation Airport Express

Similar Questions

• How can you put in place the first generation Airport Express with Yosemite

  Is it still possible? If this is not the case, can itbee with an iPhone or an iPad?

  Athanasios

  Are you sure that you have a 1st generation AirPort Express?

  It was the 1st version of 802.11"n" products... and you will probably have a lot more older 802.11' b/g ' device that was used long before that Apple has started using the name of 'generation' in 2008.

  Please look carefully at the side of your AirPort Express Terminal to locate the model number. It is difficult to see gray inscription on white background, so you may need good lighting and reading glasses.

  The model of a 1st generation AirPort Express is A1264.

  If you see A1084 or A1088, these are much older devices "b/g" which ranks Apple as obsolete... then they have not been supported for the past 3-4 years in the latest operating systems.

  So again, you have... or can borrow... a Mac running Leopard (10.5.x) or operating system Snow Leopard (10.6.x) or a PC that has AirPort Utility for Windows installed on the device, you can administer the older devices, A1084 and A1088 like that.

• having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in

  having display problems with my macbook air, first version of 2015. When I turn on my macbook, after boarding the password, then press on enter three lines (not really they look more like flashes coming from the top of the screen appear) in the colors Blue, green and red.

  also when I turn off my laptop just until the display on the top of the screen that is 2 and a half inch thick green line appears and goes about a second.

  help someone?

  Thank you

  Howdy Yaser of zoysia,

  It seems that your screen displays some graphical anomalies when you connect to your user name. I would use these troubleshooting steps in the following article on the resolution of screens:

  Restart your Mac in safe mode to reset the default display resolution.

  If booting safe mode doesn't resolve the problem, reset your Mac NVRAM and SMC to reset the video ports on your Mac to their default values.

  From: get help with graphics issues on external displays connected to your Mac.

  Thank you for using communities of Apple Support.

• WiFi problem with Aspire VN7 - 791.

  Hello

  I have a problem with my Acer Aspire VN7-791.

  I reinstalled Windows 8.1 and I have some problems with the wireless card.

  I first tried to install the drivers I found on the Web site, and none of them could do work (the system still did not recognize the wifi card)

  Then I tried to install the driver from the official site and with this one:

  http://www.killernetworking.com/support/driver-downloads/standard-drivers

  The system has detected the wifi card and now I can see the SSID of the network around me.

  But when I tried to connect to my network, I couln t, I have one "can" do not connect to the network. Windows.

  I have a dual boot Linux and it works fine, I see the networks around me and I can connect to mine.

  My wireless card is a "Qualcomm Atheros QCA61x4 Wireless Network Adapter".

  However, I can still use the functionality of network hosted the wifi card, if this information could help.

  Also, for some reason, I can't use the Acer care center, he said that my PC is not supported.

  Thanks in advance for your help and sorry for my bad English.

  Go to control panel, programs and features and uninstall the wifi. Make sure that there is no other wifi of the installed drivers. Restart and install the latest driver for wifi Acer.

  As a last resort, book your personal date and do a cover of the plant.

• Problem with iPad when I try to choose a photo from library using browseForImage

  Hi, this is my first post, and I hope you can help me with this problem... I'm using cameraUI.launch to open the camera app, and take a picture without problem, it works fine, but when I try to open the Gallery to the iPad using browseForImage this open a small window to select a rigth folder? but when I try to select any folder this cancel any operation and I can not download any image from my Gallery... Please help, Im works with FB 4.7, apache 4.14 and adobe Air 16.0.0.272 on iPhones and Android devices I have not this problem right on iPad.

  It's source code:

  protected function btnGallery_clickHandler(event:MouseEvent):void {}

  If (CameraRoll.supportsBrowseForImage)

  {

  If (Capabilities.manufacturer.IndexOf ("Android") > = 0)

  {

  loader = new Loader();

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, this.contentLoadedHandler);

  }

  cameraRoll = new CameraRoll();

  cameraRoll.addEventListener (MediaEvent.SELECT, imageSelected);

  cameraRoll.addEventListener (Event.CANCEL, browseCanceled); / * This function is activated whenever I try to select a folder to select a picture on the iPad * /.

  cameraRoll.addEventListener (ErrorEvent.ERROR, mediaError);

  cameraRoll.browseForImage ();

  }

  }

  Finally I find a solution, in fact adobe has solved the problem with the new beta 17 Air... you must download for flex developers and use this version on your project...

  Download Adobe AIR 17 Beta - Adobe Labs

• WIFI problem with router WAG120N

  Hello
  I have a router linksys WAG120N upgrade 1.00.16
  and I have wifi problems that while I use wifi on my laptop or mobile then disconnected wifi (wifi on green router, but I can't connect) until I have restart the router
  Can you help me?
  Please, I beg you!

  It could be the firmware is damaged. Firstly, what you can do is set a channel fix (1, 6, 9 or 11). Customize settings wireless advanced: tag set to 50, interval threshold of Fragmentation 2306 & 2307 RTS threshold. If this does not help, make sure you reflash the firmware, reset the router and reconfigure.

• Problem with ProRes import in first CC in Windows

  Hey all,.

  I realize the futility of the use of ProRes in a Windows environment, so I thought I'd just get that out of the way right away the bat.  That's how I got the images of the customer and it's too to try to convert into another codec (even if I have to, I'll do it, I would just avoid it).  Despite this, I had not really a problem with this until I tried to work in CC.

  I started this project in first CS5 and has been seen no problem.  I received a few files AE in CC and decided I bite the bullet and move to the more recent and rather than try and rebuild projects in CS5.  I download, install, update, open the first to rebuild the short Assembly and then find that when I import ProRes files, all I get is audio, no video.  I can import other codecs very well, it's just the ProRes who refuses.

  I had Quicktime and decoder of QT Windows for ProRes are updated, as well as the first CC.  I currently have all my work files bundled up on a drive to take in my 04:51 and work on a Mac on my lunch break, but for obvious reasons, I would like to be able to work at home.

  This client does not provide sufficient work to justify a new purchase of Mac, and I'm just at the end of the roll.  It has worked well in CS5, why not not in CC?

  Here are my specs:

  Windows 7 Professional 64 bit

  First Pro 7.0.1 CC

  QuickTime (fully updated)

  Decoder ProRes QuickTime for Windows (fully updated)

  You can provide any assistance is greatly appreciated!

  I just fell on the same problem. Windows system, body CC 2014 and Prores files would be important only the audio. Launched QT7 Pro, reopened agency CC 2014 and Prores files imported without problem.

• problem with ipad do not resize Web site

  I'm having a problem with a site on the ipad. When you view the site on the ipad, some pages are correctly resolved, but others are too large for the screen. I have no idea what is the cause.

  For example, this page will scale correctly on the ipad:

  http://dev.bluemuledesign.com/products/attachment-point-weld-on-type.php

  considering that, it does not work:

  http://dev.bluemuledesign.com/products/bolt-on-attachment-swivel.php

  The two pages are the same format. They have just connected different information. I tried clear the cache, history, etc., thinking that perhaps she, but it is not to scale properly. If anyone can help it would be greatly appreciated.

  Ok. I found the problem. the ipad & iphone generally operate by default with a website 980px. That's what I work with usually. However, for this site, I had to do wide 1225px to adapt the radial gradient behind the header. for this reason, it is has not been scaling correctly. So I used the following code in the head:

  That solved the problem on the ipad and the iphone. It still doesn't explain why some pages worked very well until I added this code, though.

• Problem with the organizer for first elements ver 9.0

  For some reason, I can't enter the organizer for my Adobe Premiere Elements 9.0 worm.  I get the error says "the organizer has stopped working", windows can check online for a solution to the problem, or it tells me to close the program.  When I check the details of eyesight problems, I get a list.  Here are some quotes: problem event name: APPCRASH application name: PhotoshopOrganizerElements.exe

  Timestart application: 4ca3a3b5 which I do not know what everything means.  Should I reinstall Adobe elements again?   Anya

  I got elements of Prime Minister for about 6 months now and have not had a problem with the Organizer until last week.

  What I have to reinstall the whole program or I should just install the portion of the organizer of the program?

  Anya

  Thank you for responding.

• 2nd generation Airport express does not not with El Capitan

  My express shares two airport were suddenly disconnected my wifi. Despite the soft resets and reset hard I'm getting nowhere.

  Airport said (6.3.6) utility it is impossible to extend the network, and amber flash units.

  I think that this could have happened when I updated the software to 10.11.3, iMac but I'm not sure. earlier versions of El Cap worked very well.

  I run a Time Capsule and then two Airport Express units off that to extend the network. The two Airport Express are 2nd generation.

  Thanks in advance

  Make sure that the Time Capsule is not save at the time and then pull the power cord to the back of the unit or remove the plug from the AC outlet

  Wait 10 to 15 seconds, and then turn on again time Capsule and let it run.

  Temporarily move an AirPort Express Terminal in the same room or in immediate proximity to the time Capsule. Power off of the 'other' AirPort Express for now.

  Perform a hard reset on an AirPort Express Terminal by pressing the button of reset for 5-6 seconds while the airport was turned on for a few minutes. Release the reset button and allow a minute for the AirPort Express restart to a slow status of amber light flashes.

  Rerun the Setup program on the AirPort Express

  If things set up correctly, turn off the AirPort Express and move to the desired location, and then turn it upwards.

  Turn on the second AirPort Express Terminal, perform a hard reset on the device and set up again as you did the AirPort Express.

• Problem with Alias and Union of common table expressions

  I have a query that runs in SQL Server, but I have problems with it in PL/SQL.  I keep running into the error message saying "invalid identifier" when I try to refer to PlantNumber or Plant_No or any other part of the CTE or subquery.  Is this not possible with Oracle?

  Here's a shortened version of my request:

  WITH RemoveData AS
     (
     SELECT a . PLANT_NO , a . ALLOC_WHDV_VOL , a . KW_CTR_REDELIVERED_HV , a . MTR_NO , a . MTR_SFX , a . TRNX_ID , a . REC_STATUS_CD ,
  MAX(a. ACCT_DT ) ACCT_DT
  OF GasStmt one
     WHERE a . REC_STATUS_CD = 'RR'
     GROUP BY a. PLANT_NO , a . ALLOC_WHDV_VOL , a . KW_CTR_REDELIVERED_HV , a . MTR_NO , a . MTR_SFX , a . TRNX_ID , a . REC_STATUS_CD
     HAVING COUNT(a. REC_STATUS_CD ) > 2
     ),
  RemoveData2 AS
     (
  SELECT plant_no "PlantNumber"
     , SUM (-a. ALLOC_WHDV_VOL () 'PlantStandardGrossWellheadMcf'
  ,SUM()KW_CTR_REDELIVERED_HV() 'KeepWholeResidueMMBtu'
  OF RemoveData one
     GROUP BY plant_no
     ),
  OriginalData AS
     (
     SELECT a . PLANT_NO "PlantNumber"
     , SUM (a. ALLOC_WHDV_VOL () 'PlantStandardGrossWellheadMcf'
     , SUM (CASE WHEN a. REC_STATUS_CD = 'RR' THEN -a. KW_CTR_REDELIVERED_HV Else a . KW_CTR_REDELIVERED_HV END () 'KeepWholeResidueMMBtu'
  DE GasStmt un
     LEFT OUTER JOIN (SELECT MTR_NO, MTR_SFX, TRNX_ID, REC_STATUS_CD, MAX(ACCT_DT) ACCT_DT
  DE GasStmt
     WHERE REC_STATUS_CD = 'RR'
  GROUP OF MTR_NO MTR_SFX TRNX_ID REC_STATUS_CD
     HAVING COUNT(TRNX_ID) > 1) b
     ON a . MTR_NO = b . MTR_NO
     AND a . TRNX_ID = b . TRNX_ID
     AND a . Rec_Status_Cd = b . REC_STATUS_CD
     AND a . Acct_Dt = b . ACCT_DT
     WHERE a . ACCT_DT > '1/1/2010'
     AND b . MTR_NO IS NULL
     GROUP BY a. PLANT_NO
     ),
  UnionCTE AS (  
  SELECT *
  OF RemoveData2
  UNION
  SELECT *
  OriginalData
  )
  SELECT PlantNumber , SUM()PlantStandardGrossWellheadMcf() AS PlantStandardGrossWellheadMcf SUM()KeepWholeResidueMMBtu() AS KeepWholeResidueMMBtu
  DE UnionCTE
  GROUP BY PlantNumber

  This is the bottom, select from UnionCTE which is the origin of the problem.  Advice would be appreciated!

  Hello

  Lose the double quotes.

  The column names are case-sensitive in Oracle.  Often, you do not notice that, because that all code that is not inside a kind of quotation marks (quotation marks single or double quotation marks) is capitalized before it is compiled.  So, when you say

  SELECT PlantNumber

  or

  SELECT plantnumber

  or even

  SELECT PlaNTNumBeR

  that you are referencing a column called PLANTNUMBER, all uppercase.  In this case, however, the column alias that you gave was

  SELECT plant_no 'PlantNumber.

  with small letters.

  Again, the best solution is not not to use double quotes.  I know that PlantNumber is easier to read than PLANTNUMBER, so use PlantNumber, but not inside double quotes.  If you really need to display the header of column in mixed case, use your front end (for example, COLUMN...) TOPIC command in SQL * more), or else assign an alias of mixed case in double - quotes in the main request only and use the name without quotes around elsewhere.

  .

  I hope that answers your question.

  I can't test my suggestion, of course, because I do not have your tables.  Whenever you have a problem, it helps if you post a test script complete that people who want to help you can run to recreate the problem and test their ideas.  Include CREATE TABLE and INSERT statements for some examples of data, or to post a question that uses commonly available (such as the scott schema) tables but gets the same error.

  See the froum FAQ: https://forums.oracle.com/message/9362002#9362002

• Problems with iPad wifi

  I have an iPad 4. A month ago I started having problems to make music to flow the iHeart, weather radar pages to load, and sometimes, to any web page using my wifi. I have to either activate the VPN feature to use my wifi or data on my phone by Personal Hotspot. My router is a Netgear Nighthawk R8000. I have checked & updated installed and restarted the router. I don't have these problems on my iPhone and my MacBook Pro. In addition to a factory reset on my iPad, what can I do?

  Hello Gammy2013,

  Try try troubleshooting your iPad with these instructions If your iPad, iPhone or iPod touch connects to a Wi-Fi - Apple Support Network

• Satellite Pro A10 - Wifi problem with router ZyXEL

  Hello

  I recently acquired a Satellite Pro A10 (PSA15E - 0115Q - EN) off the coast of the friend. It doesn't have a wireless card installed, but I managed to take of a Lucent MPC13A-20 that was installed without any problem, and it is recognized as a Toshiba Wireless LAN Mini PCI Card. However, despite the computer being able to read my neighbors wifi (next door and in the apartment on the floor), he refuses to acknowledge my router, even if I'm in the same room. My router is a ZyXEL P-660HW-T1 v2 which works very well (I tested it with another laptop).

  Can someone please help!

  Thanks in advance,
  Fred

  Hello!

  Make sure your router is using a WiFi standard that supports your card. If you use 802.11n you should drop down to 802.11 g for the tests.

  In addition, you should check the channel of your wireless network card. It should be the same as the router.

  Good bye

• Satellite M100-126, Wifi problem with Blutooth on Vista activation

  Hello

  Installation of Vista Pro on my M100, I've got blue screen e if active when blutooth Wifi operational.
  No Blutooth problem if you use the Lan and Wifi card down.
  All the drivers have been downloaded from the website of Toshiba (Blutooth drv: 5.10.06 for Vista 32 bit).
  For now, using Wi-Fi with disabled Blutooth.
  Thank you very much for all your comments... :-)

  Alain

  What is the message of the blue screen (it mentions any driver name or device)?

• WAG120N - problems with iPad Internet connection

  I have local Wi - Fi network with 2 Macs, 2 PC, iPhone, iPod and iPad to router Linksys WAG120N House. On iPad when I try to connect to the Internet I have to turn the WiFi market. It helps for awhile, but after awakening from sleep iPad I go too off and on again. It drives me really crazy. Smetimes (almost never) happens on my iPhone 4 (same configuration network on iPad). Other devices to connect to the Internet whenever I need. Any help, please?

  Let the broad channel be set to 9 and below change the standard channel to 11 and click on save settings.