problem with anchor trying to go back the page

Similar Questions

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• problem with JQuery TAB when I refresh the Page

  Hello
  
  I use a JQuery tab and I have following tabs under the present.
  
  tab1
  tab2
  tab 3
  
  When I click on tab1, tab2, tab3 individually it works fine.
  
  problem... Now, when I click on tab 3 and then I refresh the page, the control returns to the first tab tab1.
  
  what I want... If I'm on tab2, and I update the page... control must remain on the same tab (i.e. on tab2)... control should not go back to tab1 *(the first tab) *.
  
  Thank you
  Deepak

  Hello

  This might help
  http://dbswh.webhop.NET/dbswh/f?p=blog:read:0:article:195800346705831

  Kind regards
  Jari

• I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

  I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

  You will need to correct the links that begin with "file".

  Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

  Click on the yellow folder on the property inspector, and then select the target page.

  

  If your site is small, you can edit the links manually (remove the part in red)

  content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

  It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

• Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Windows was able to successfully install device driver software, but the driver has encountered a problem when he tried to run. The problem code is 43.

  Signature of the problem:
  Problem event name: PnPDeviceProblemCode
  Architecture: x 86
  Hardware ID: PCI\VEN_10DE & DEV_0428 & SUBSYS_110B1734 & REV_A1
  Configure the class GUID: {4d36e968-e325-11ce-bfc1-08002be10318}
  PnP problem code: 0000002B
  Driver name: nvlddmkm.sys
  Driver version: 8.17.13.142
  Driver date: 15/05/2012
  OS version: 6.0.6001.2.1.0.768.2
  Locale ID: 1033

  Hi, Senga,

  Start > right click on computer

  Select manage

  Click on continue in the UAC window

  Click on Device Manager

  Click on the + sign next to the device

  Right click on driver and select rollback

  If the cancellation is dimmed, select uninstall

  Close Device Manager

  Back to zero computer and Windows will reinstall the driver

  Go to the manufacturer website, download the updated driver to update and save it to the desktop

  Double-click the .exe file to install

  You can also try booting in safe mode with network.  Download the following tool and run a scan complete to rule out malware.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16

• I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the safe mode and still no success. Help, please.

  Question
  I can't see the pictures in my yahoo email, I did not have this problem with other browsers. I used the mode 5 firefox safe and always without success. Help, please

  To help other users find solutions, please come back to this Thread and connect you to the
  Forum with your user name and password:

  Click on 'resolved' beside the answer above that BETTER resolved your issue

  DO NOT CLICK on 'Solved It' next to this answer

• I don't know why I had problems with FF 3.6.16 and the last update for thunderbird

  I'm at the Canada and for some reason, downloads for the two FF 3.6.12 and Thunderbird was last updated was the BritishVersions is why I UK search engines, not the US versions is maybe why I'm struggling with my email and addons. The other 2 computers in my house is the American version.

  But there is always something a bit screwey with 3.6.12 that some addons do not work correctly on other computers. Can you please change the software for the US version please? Thank you

  I deleted the software twice already. before realizing I was downloading the British version... same problem with my Thunderbird cannot connect to the Internet service provider even if everything is done correctly! Help!

  You can find the version en here:

  • http://www.Mozilla.com/en-us/Firefox/all.html
  • http://www.mozillamessaging.com/en-us/Thunderbird/all.html

• I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  I have printer color laserjet 5550N having problem with error 59.C0. What is the cause of the error?

  Thanks Ray,

  Hello... How can I get the manual download for all the error on any printer laser color spray top of HP range.

  Kind regards

  Monday Nwankwo

• After 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear

  Hello, after 3 years of use of this helmet and having no problems with it, now I can hear the sound in the right ear... what should I do? Help, I don't want to say 'goodbye' to it already... Thank you

  It could be the plug on the computer that is the cause of the problem. Try another helmet or a pair of speakers in it.

  If you hear only on one side, who will tell you that is the question.

  If you hear from both sides, you must obtain a new helmet

  Software will fix either of the foregoing...

• Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put passw

  Since Acrobat Reader downloaded DC I can't sign my PDF documents. It does not give me the option more and yes I am connected. On the old version, I got no problem with clicking on "signature" and draw the area where I needed my signature, put the password and "POOF" my signature would be there. With this new version, it won't do that or give me the option. The online help is useless. I need to explain to me how connect you as I used too?

  Hi nicholass35183848,

  I assumed that you had a digital signature created in your player application of old and whenever you use to fill out a pdf with a signature field signed you it. But in order to draw and then sign you must use Acrobat Pro DC no DC drive.

  Thank you

  Abhishek

• I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  I tried to roll back the last update of lightroom, but it says that it does not apply to me.  How to bring back the old version?

  Hi cherry_boy,

  6.3/CC 2015.3 Lightroom is now available - try to update to this version which includes the previous import feature, bug fixes and new support for photo/target device profile: Lightroom CC 2015.3 / 6.3 now available

  Concerning

  Pete

• I have a problem with a card being inadmissible for the zoom on a phone.

  I have a problem with a card being inadmissible for the zoom on a phone. The Web site has been formatted for the phone using Muse. The plan should be saved in a way in Photoshop or y at - it a setting in the Muse who can fix this?

  Please provide more details, as if the card is integrated an image or a real map generated by widget.

  The generated plan must zoom in/out.

  Thank you

  Sanjit

• I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please advise...

  I have problems with Lightroom. I just downloaded the creative cloud with LR and PS PS works fine, but does not open LR. It is stuck on the license screen and freezes. Please notify.

  reset your preferences-

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Adobe media encoder: https://forums.adobe.com/thread/1713540

  Legacy: http://helpx.adobe.com/after-effects/using/preferences.html

  Bridge: https://helpx.adobe.com/bridge/kb/troubleshoot-errors-freezes-bridge-windows.html

  Dreamweaver: https://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs6-cc.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: http://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: https://helpx.adobe.com/lightroom/help/setting-preferences-lightroom.html

  Muse (mac): https://forums.adobe.com/thread/1246022?tstart=0

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: http://www.mediacollege.com/adobe/premiere/pro/troubleshooter/trash-preferences.html

• Problem with Vista, a limited operation of the operating system to start

  Ill try too keep it as simple as possible without forgetting all the necessary details. Several weeks ago, I started having issues, crashed the computer (maybe thought that I still had a virus...) and I was on my way to return things together.  All functions were beginning to run because they were all back to normal, and it happened.

  Just beginning to return to normal, as I said.  One morning before work, I was doing the usual (check email, casual, no navigation, no new installs equipment or programs, etc.) and when I got back home I woke up the computer and all the usual icons on the bottom right toolbar disappeared except, load icon, network connects mcafee security and volume icon.  There's a new lil guy there USB symbol with a green check mark (deletion of material safely)

  I tried to open Internet Explorer and Itunes and I was invited with a window that read "what you want to KIKILA the file with" (itunes.exe, IE.exe and so on when I tried other programs), with oddly enough IE as the recommended option.  I was curious to see what happened and tried to open 'the file', IE was opened and then I was invited with a window as if I have been download an attachment and almost nothing would happen after that.  I turned off the computer and restarted and I had none of the usual routine... Reception centre, the weather bug... you get the idea.

  On what I can do... I can open AOL in the start menu only, I can open the control panel and use most of these requests and I can access help and Support (and IE will open this application... how I got here) and a few other select from the start menu, but everything is a program is pretty much off limits from the start menu or desktop.  As I said before that I did not install anything, no new downloads, hardware, etc.  I thought that my computer could have done an automatic restart after windows downloaded an update.

  What I tried.  Because I thought that an update might be the only thing that could have been performed, I started there.  I tried to go back to the conditions before a one update or approximately twice a week at a time and restart and try again.  No luck there, I went to help and support and tried a few things here.  I tried a full system restore and last known reboot and no luck there.

  Now that I've almost exhausted my limits with my literacy of the inner workings of a computer, I come here.  I could probably walk through a solution if possible, as long as I don't have serious technical help.  Or I can turn this into a big frisbee and repeat if nessescary ignite, but id rather not spend money if I have to.

  Thanks in advance.

  Kramer

  Hey Kramer,

  I suggest you try the methods mentioned below and check if it helps.

  Method 1: Perform a scan of the SFC (System File Checker) and check.

  http://support.Microsoft.com/kb/929833

  Method 2: Perform a check disk (Chkdsk).

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Note: When running Chkdsk on the drive if bad sectors are found on the disk hard when Chkdsk attempts to repair this area if all available on which data can be lost.

  Method 3: Try to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If the problem is resolved by creating a new user account you may have a corrupt user profile. Follow the article provided to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Problem with sharing of data specific to the application via BBM 10.2

  Hello - I am having a problem of data sharing applications with BBM 10.2-specific. I take the advice of some comments here, and it seems to work on 10.1. I can receive the file on 10.2, but when I try to share on the same device that I get this:

  InvocationWrapper::onQueryFinished: no matching result from Menu Service for query
     mimeType=""
     uri=QUrl("file:///accounts/1000/shared/misc/My App Data.myapp")
     data= ""
     metadata= QMap()
     perimeter= 0
     action= "bb.action.SHARE"
     target= "sys.bbm.sharehandler"
     invokerIncluded= false
  InvocationPrivate::onQueryResolved: no result matching query, no armed signal sent.
  

  It is the call that I use, which works on 10.1 but not 10.2:

  Invocation {
     id: invokeBBM
     query {
        InvokeQuery {
           id: invokeBBMQuery
           uri: "file:///accounts/1000/shared/misc/My App Data.myapp"
           invokeTargetId: "sys.bbm.sharehandler"
           invokeActionId: "bb.action.SHARE"
        }
     }
  }
  

  I also tried it with a "text/plain" MIME type and a few other variations, same result. If something has changed in point 10.2?

  (And while I'm asking, any reason why I can't use the data instead of a file uri? I need to convert the data in JSON, save the file, share the file, send, receive, save the file on the receiver, then open it, read it, and convert it back. Seems a little roundabout, if I could share the JSON data. "(And this is the only reason that my application requires permissions of shared files)."

  Thank you!

  It is a problem with the current version of BlackBerry Dev 10.2 Alpha.  You can call C++ BBM, but citing QML does not work.