problem with arrows

Similar Questions

• (Problem with the arrows) Adobe Reader is not working properly

  I have problem with the Adobe Reader plug-in. When I have a tab open with the pdf file, my arrows do not work in other tabs in firefox, only in this tab where it is the open pdf file. Also, I noticed that when you try to use the arrows in the other cards, they are working on a pdf file.

  I am tempted to uninstall and reinstall Adobe Reader, but it does not work. Help, please.

  I solved the problem reinstalling Firefox, because when I turned off Macromedia my pdf file still worked, but the arrows didn't always work. I think it was a problem with the plugin from adobe.

• Mac OS - problems with the arrows with drawing tools

  Hi everyone, I have a problem with illustrator cs4 on mac os 10.5.

  When I use the arrow keys to change the properties of the drawing of the tools (segment, arc, spiral, etc.), they change too fast.

  example: when pressing the arrow to increase the segments of the spiral, he adds too segments (like 5 or 6), I can't increase one by one...

  can someone help me?

  Thank you

  PS: Sorry for any mistake, English is not my first language

  You use a WACOM Tablet?

  We're talking about behavior with the tablets. It sucks, but WACOM never seems to remedy. Only solution I know is to disconnect the tablet.

• Problem with the arrow keys in the editor

  Hi, I have problem with the arrow keys in the editor. I don't use arrow in the editor to the bottom and select list (list of table fields, for example). Arrow in the result window or navigator to work normally.
  In the editor, I have problem with SHIFT + left arrow also key.
  Someone at-similar problem? (Developer SQL 1.5.5 with patch)
  Thanks for your reply, Petr

  Could be the old and known problem with accelerators, try:

  Preferences - accelerators - load - default setting

  Hope that helps,
  K.

• Problem with cursor - will switch to a link

  I was hoping that someone could help with this.

  My dad's Mac has a problem with the cursor. It uses the trackpad and when you try to click on a link, it will not work. The arrow does not change into a symbol of the 'hand' and it can not click on it. This makes it almost impossible to navigate. It seems that the links are not recognized. He tried to use a mouse via the USB port and nothing changes.

  He tried to update to El Captain but he can't because the mouse doesn't work. The simple, restart or turn off / suite does not work. The problem persists on Chrome and Safari.

  Any help appreciated, thanks.

  Hi Irbea,

  Thank you for using communities of Apple Support. I see that you are the dad had problems with clicking on the links on his MacBook. These are some great troubleshooting steps to try to solve this problem. I am happy using.

  According to the steps that he has already done, I'll try to test this in safe mode. This will allow his MacBook making some changes and prevent the loading of the software. Please follow these steps to safe mode:

  Try safe mode if your Mac does not end commissioning

  While you are in safe mode, you may notice that the MacBook is running slower or the screen flashes.  No worries, it's normal.  Read this article for more information about this:

  Graphics performance limited in recovery of OS X or in safe mode

  If you continue to have problems trying to test in a new user:

  How to test a question in another account on your Mac.

  Have a great day!

• Problems with the keyboard navigation

  I try to use the caret browsing most of the time or all the time, but I have several questions. (So please don't tell me how to disable the keyboard navigation). Also, I would like to use the keyboard navigation without also having to use the mouse - I need now for most to overcome what I think is problems.

  The problems are:

  (1) switching to a page where already in accent circumflex mode requires using the mouse to move the focus somewhere before the caret navigation is logical. I tried the wrapper work using the search text or tab, but it's the two unrelible and against nature (even tedious).

  (2) while in insert mode I sometimes loose site of the cursor. I can continue to use the arrows until starts it page scroll which tells that the caret is on the top edge or lower, but I still don't see it.

  (3) while scrolling with arrows, cursor/caret hits a link or a title then re-use of the fl arrows increment lines at this level "indentation", without going through whole paragraphs of text. I need to use the mouse to reset the caret a text box.

  (4) I think it's the same problem as above, but I enter a mode where the up and down arrows take me to top/bottom of the page rather than up/down line as it should.

  (5) the cursor becomes more a region on the side of the page (such as a navigation bar), and there seems to be no way the mouse-less to get the cursor to the text box.

  (6) it seems (but I'm not positive of what really happens) after scrolling to the bottom of the page not in insert mode, I switch to insert mode and start using the arrows but caret navigation starts from where the focus was before--as forwards several page scrolls with the space bar.

  In summary, what I expected to happen is:

  (a) I navigate to a new page in insert mode and have somewhere logical automatically set focus as in the center of the current view.

  (b) set the mode insertion while on a page - automatically have focus on the Center or other places of logic in the current view.

  (c) never increment by something other than a line upwards or downwards. Especially, do not go to navigation link or next paragraph - what ever he is doing.

  I use Firefox 24.0 on XP and have the same problems in Mode without failure.

  This is a bug.

  Firefox Bugzilla entry here.

• Problem with messages sent by post El Capitan: my sent messages appear only when someone answers, not in my "Sent" folder as they did.  Can anyone help?

  Problem with messages sent by post El Capitan:

  My sent messages appear only when someone answers, i.e., in the context of a thread.

  not in my folder "sent" as they did.  Can anyone help?

  The mailbox list is divided into categories with such topics on my Mac. When you position the cursor on one of these positions (with the exception of the mailboxes), you should see the Word display / hide it on the right. Click view, if that's what you see.

  In the category of the mailboxes, the mailboxes are arranged in groups, such as Inbox. To the left of each group is a small tip of arrow. If the arrow points to the right, click it so that it points downwards.

  Also note that you may need to scroll the list of mailboxes upwards or downwards to see it all.

• HP 15 r-045tx: problem with audio driver of hp r045tx

  Hi people,

  I am facing problems using Skype video call feature as it also appears with a message "problem with recording devce" or a "problem with the playback device. and secondly, I also used audition Adobe and in that also, I faced the problems with the audio driver.

  and every time this problem occurs that the speaker in the lower right corner icon displays a message "the audio service is not running" and solves the problem at the opening of the troubleshooter, but even once, when I use Skype it reappears.

  I have this major problem. can someone help me please?

  Hi there @shivam17,
  
  Welcome to the Forums of HP Support! It's a good place to find the help you need, so many other users, the HP experts and other members of the support staff.

  I understand that you have a problem with your audio files on your system when using Skype. I'm happy to help you with this.

  Having other problems with the sound, or did when you try to use Skype?

  Here's something I found regarding this issue of support of Skype Forums:

  Problem with playback device?  -community.skype.com

  More down this page is a post which includes the following which I included verbatim. Give it a try.

  1) go to control panel.

  (2) place material and audio.

  3) click on the sound.

  4) click on your speakers by default, then select as "default speakers."

  (5), click Properties.

  (6) to go to the "Advanced" tab

  7) click "Restore Defaults".

  Tip: Do not forget to press 'OK '.

  You're done with the part of the system!

  (1) now go to Skype.

  2) go to tools > Options.

  3) click Settings Audio.

  4) click on the green button with the arrow. If it works, you are finished. Or, click the menu drop down and select your default speakers. If it still does not work, then read on.

  5) click 'Show Advanced Options '.

  (6) select your speakers by default, and then click on move upward, until it is at the top.

  (7) test your speakers!

  Tip: Do not forget to save.

  Let me know if it works for you.

• Problem with keys Fn + F10 on a Satellite A120SE-189

  Hello

  I am facing a problem with my Toshiba Satellite A120SE-189: the F10 function turn off by pressing Fn + F10.

  Although the F10 function on, I use the keyboard Overlay. Yet, when I try to turn it off (Fn + F10), the keyboard does not work (as it should), but also the keyboard and the space bar don't work at all. In addition, arrow mode indicator still lights up, even though the lights appear softer.

  How could I solve the problem?

  Thank you very much for your help!

  Daniel

  In front of me, I have Satellite Pro 120 and I tested the functionality of FN + F10 and FN + F11 with Notepad. In my case everything works fine. I really don't understand how it can stop working. You can try to roll back OS to an earlier time using System Restore tool. Maybe it helps.

• problem with the 3/square icon on my iMac keyboard key.

  I have a problem with the 3/square icon on my iMac keyboard key. The icon of Fund will not work, I just get # when I use the up and down arrow to the left of the keyboard. A lot of ideas, everyone please?

  I just see the same question and the answer is the book symbol is alt + 3, I have a US keyboard. I wonder why that is? I bought my iMac to John lewis to the United Kingdom. Anyone have the answer for me please?

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problem with window painted and scrollbars when editing (LabVIEW 8.0.1)

  I'm under LabVIEW 8.0.1 in Windows XP SP3.  For my main VI, I came across a strange problem about 5 months ago.  The front window - both in edit mode and run mode - arrested repaint itself on the right side which is no longer visible when you scroll from top to bottom, but also visible overlapping Windows.  Coinciding with the repaint problem, both bars scroll search disabled grey arrows and no boxes in the bars that you can click and drag to scroll the window.  The scroll bars work still partially if you pass the mouse over it and roll the mouse wheel but does not work by clicking and dragging.

  The façade has a lot of controls and indicators, including containers of tab control and is greater in the horizontal directions and vertical so the two scroll bars must be active.  But I deleted everything in the Panel before and everything in the schema and the problem persists.  If the problem is not directly related to a control/led display.

  I saved the simple VI to this problem (using a line of large text and a high box rounded to test), and then created a new VI and copied the two elements at the new VI.  This new VI didn't paint it and the problem of the scroll bar.  The two screws are slightly different in the memory usage and the revision number (bad is review 1785 and the good is revision 3), but otherwise the two screws are identical.  I have attached two screws at this announcement.  When you first open the bad VI, you will see the scroll bars disabled while the good VI has active scroll bars.  To replicate the repaint problem, scroll the window up and down with your mouse wheel.  If it's good when you first open the VI, click on another window, then click on the window of VI and try again the mouse wheel.  This by clicking sur-loin-and-return always causes the problem of repaint for me.  I tried the screw on two different computers, both running Windows XP SP3 and LabVIEW 8.0.1 with identical results.

  Here's what I discovered simple troubleshooting with the screws:

  always off scroll bars

  * repaint the problem in the main window for larger then 680 pixels of window widths

  * repaint the problem in the menu bar of the main window for widths of more than 646 pixels

  * entire window becomes disabled than 1348 pixels window width

  * can paint window minimize and restore, but only repaints only once

  * scrollbar boxes sometimes flicker in the display, but then disappear

  * Scroll left and right hovering mouse over the bar and horizontal scroll by using the mouse wheel

  I found something similar on this forum (thread: problem with refresh of façade)-it could be linked to the CAR on the Panel being offset internally.  I don't have access to LabVIEW 8.5 or later and do not plan to upgrade - I have not tried the trial version, as this user has done.  I could try to copy and paste my set of the block for a new VI diagram but the VI is so important I'm afraid something would break, plus I don't want to do it again in a few months.  The problem seemed to occur after a certain number of stops (or revision number).  I save copies of backup often and when the problem first happened, I was able to go to a previous version, make the missing changes and save it without any problem, but this only delayed the problem and he came later.  It is therefore perhaps the revision number.  It seems not related to a change or a particular addition in the front panel and the graph.

  The attached picture shows the repaint problems and scroll bar in bad VI.

  This raises a question I have - if this problem is a bug has been fixed in 8.5 and later, is it possible to apply bug fixes for older versions?  Or what I need to pay for an update fix these bugs?

  Seems that something got corrupted with this VI. Things to copy on a cool VI and things should be OK.

  See also this recent report of a similar problem.

• Problem with diagram State Toolkit 1.0 - LV 8.2 upgrade to 2014

  I'm in transition a large amount of code from Labview 8.2 to 2014, and I'm having a problem with state diagrams have been added using the state diagram Toolkit V1.0.

  The figure below shows the question, Labview knows the loop and its components are associated with a state diagram, but it option to change the schema, "change the state diagram," is not available.  In Labview 8.2, which I am currently running on older machines, I would simply select "Change the state diagram" and another window of each State and arrows between States appears, allowing the mounting of the diagram.

  I think I have to install the state diagram Toolkit V1.0 software, but it is no longer available on the Web site of NOR.  There are new States transitions module I installed, but it is significantly different from the old Toolbox and does not support.  Any recommendations?

  Thank you very much
  Phil

  

  Good news:

  (1) SDE still works with SP1 LV2014.

  (2) I have the installer and I'm ready to send it to you. Please send me a private message with your email address.

  Be sure to support this idea.

• I'm having a problem with my hp psc all in one single 2210

  Hello!

  I'm having a problem with my hp psc all in one single 2210

  First of all, it does not use my tongue (I think he speaks Spanish or Italian)

  so, if anyone knows how to change the language please tell me.

  Secondly, I can't scan the computer says it cannot connect to the scanner and the printer indicates a failure of the scanner massage.

  Hello ComputerLover.

  To restore the language, follow these steps:

  1. press Setup.

  2. press 5, then 5 again. This selects the Language value & country.

  3. you will see a list of languages. You can scroll through languages using the arrows.

  4 using the keyboard, enter the number to two digits to the desired language.

  5. Press 1 for Yes or 2 for no.

  6. continue to select the countries or regions.

  The failure of scan, please see this document.

  http://support.HP.com/us-en/document/c00587971

  Bravo!

• Problem with KEYBOARD for notebook G42

  Keyboard on my laptop has a problem. right shift key and arrow keys do not work. How can I check if it is a software problem or a problem with the keyboard. If the keyboard is a question where and how we get the keyboard made for this model.

  Please answer.

  You have the problem if you connect an external keyboard? If the external keyboard works, I remove the keyboard and look at the part number and then search on eBay, Amazon etc. Do not do this if your machine is under warranty. Contact the HP customer if it's still under warranty.