Problem with Chicony camera on Satellite A200

Similar Questions

• Problems with installing XP on Satellite A200 - 13 M

  Hello
  trying to do a fresh install of Xp on my Satellite A200 - 13 M,
  I have the following message:

  Setup couldn't find any hard disk installed in your computer.
  Make sure any hard disk are powered on and properly connected to your computer.
  and that any hardware configuration of the drives is correct.
  This may involve running the program installation or diagnosis provided by the manufacturer.
  Setup cannot continue,
  to exit Setup, press F3.

  Help!

  Use NLITE as search term and you will find son with the exact description how create a bootable CD for Windows XP Home edition installation that includes Intel Matrix Storage Manager.

• Problem with driver sound on Satellite A200 under Win XP SP3

  Hi guys

  I recently bought a Satellite A 200 PSAE7. I had downgraded it to Win XP.

  Everything worked perfectly until last night. I restarted the laptop and I got no sound. I tried to reinstall the Realtek audio drivers, he succeeds, ask for a restart, but the sound is still not working. I tried everything, removing the drivers via Add/Remove programs and Device Manager and then put it back. When I restart it tells me 'PCI device detected"after I installed the audio drivers. But the sound does not work.

  Any advice?

  The problem is that you have not installed the MS patches that are really essential.
  I'm talking about the * patch KB888111, KB835221, and *.

  You must remove first the audio driver from the system.
  Then you must install two corrections.
  After restarting again, reinstall the audio driver that is on the page of the Toshiba driver.

  Best regards and good luck

• Problem with the wifi on Satellite A200 - 1-3 configuration

  My laptop is A200 - 1 3. The problem is that I don t have a wireless network. My other laptop has configured automatic wifi when I turn on the laptop for the first time. Who has not. He tells me to spend on something, but I put t know what it is. Please help me.

  http://www.picnote.com/download/279793852/Untitled.jpg

  Greetings

  Hello

  Take a look in the manual for the wireless switch. This will tell you how to enable the wifi switch. Although I'm not an expert, every Toshiba I used you also allows to use the Fn key + key F8 to enable wireless connections.
  If you do not have the manual, you can download it here, I think.
  [http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=UK]

  Best regards

• Image problems with the camera on the Satellite A200 - 14 d

  2 days ago, I bought my laptop and the image on cam doesn't seem right to me. It's a little blurry, as very many lines through it. It resembles nothing of the image from a camera with 1.3 Mp should look like. It's even better on my old cam... I tried changing the settings but nothing works.

  Anyone know what the problem with my camera? Please help me because I do not know what to do...

  Hello

  As you said, it is a 1 pixel cam. 3 MB and you should not expect too much of this cam.

  But you can change some settings to improve the quality of the image
  Check the options in the "Assistant camera".
  In the "Properties", you can define Image settings like sharpness, contrast, saturation, etc.
  The quality of the image also depends on the standard photo as jpeg folder, bmp and the size of the image.

• my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  my iphone 6 is not the Japan but still having a problem with his camera shttuer. sound is not being muted when the phone is silent. Help!

  The Japan is by far the only country where the shutter is forced to be on

• Problem with keyboard on the Satellite L735

  (In English) I have a problem with my laptop model Satellite L735-sp3102w not use the CAPS LOCK SHIFT CTRL, x, v, m, know me how I can exclude a keyboard error or an error of configuration keyboard

  (Whenever I turn on the laptop turns on but the button Caps Lock off instantly) I hope that your help thank you

  Double post:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=70664

• Problem with zoom camera for blackBerry Smartphones

  I had no problems with my camera so far. I got the Curve 8310 for 3 months and now all of a sudden the camera won't zoom. can anyone help me this.

  I had the same problem with my 8310 that I solved it by removing the battery for a few seconds and then replace and reboot... zoom doesn't always from time to time, but restarting always sorts

• Satellite A200-J01: problems with Chicony webcam with Yahoo messenger and MSN

  Dear friends

  I just bought a Satellite A200-J01 with Windows Vista Edition Home Premium pre-installed on it. My problem is when I want to use my webcam (Chicony USB built-in 2.00) to have a video call with MSN and Yahoo messenger Internet, suddenly, it stops working and it shows a message that the webcam is not connected and no webcam was found on your computer.

  And then when I log out Yahoo messenger, come out of her and run Camera Assistant Software it shows this message "Locked by another application" Although there is no other applications running.

  The problem remains, unless I restart the computer. I read all the topics and messages as in my case in this site, but none of them helped me. I want to know if someone has encountered this problem, if this chicony webcam is compatible with yahoo and msn messenger and finally what I can do about it.

  Hello

  What about software chicory and the driver update?
  Please check if the software most recent is available and has been released. If so, remove it the old an and after reboot the new install the most recent version of this software chicony.

  It seems that similar problems appear on laptops from different manufacturers that use the Chicony webcam.
  Everything looks like the chicony Vista software is not 100% compatible with MSN, yahoo Messenger, Skype etc programs.

• Satellite C660-1PH - problem with Chicony USB 2.0 camera

  Hello.

  I recently purchased satellite C660-1PH and I have a problem with my webcam. When I use Skype the image of me is blurred.

  Any ideas? I looked fot the webcam settings and these are all the default ones.
  What do I have to uninstall and reinstall the drivers from scratch?
  Lia

  Hello

  * @ economid *.
  How did solve you this?

  In my case, the protective film has been mounted on the front of the cam.
  I removed it and the photo quality was much better.

• Problem of processor on the Satellite A200 - 14 d?

  Hello, I have a Satellite A200 14 d and I installed Vista. Recently, I downloaded CPU - Z and had a look at the details of the processor. There is one annoying thing: falls the processor speed of 1800 Mhz to 700 Mhz, whenever it is not being used, even if in the BIOS it has the fixed value and the computer is plugged in and power management it is set to 100% too. Is this a problem?

  Why is this? Thank you.

  First: no, this isn't a problem. I mean if you need preformance then the CPU will automatically until it s normal speed.

  With regard to the 1800 - 700 Mhz: I think the chipset made by himself. Maybe it s a powersaving feature internal. Weird is that the CPU does not work on top speed even if it s on fixed speed cameras. Usually it's REALLY NO problem since the machine is at your service with the speed you require.

  I think that it s more a subjective issue that is your point of view, which is certainly understandable because worried you´re. But I think you should live from your machine is not defective and works perfectly. (It would be another thing if the machine would crash constantly or if you have some bluescreens or another..)

  I hope that it s now clearer for you. :)

  Welcome them

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• Errors/problems with my brand-new Equium A200 15I (including video material)

  Hello

  I am treated to a new computer laptop last Saturday and only had for about 3 and a half days so far but I noticed a few things that I wasn't sure were errors/defects or if it was simply because its news, like the fact that sometimes I type with the keyboard and some letters do not appear on the screen , I think it's probably more to do with me not type or support pretty strongly on the keys rather than anything else, his is not so much now... the touchpad becomes a bit sticky too and he thinks I want to scroll up and down when I move the cursor does not scroll sometimes but I managed to make it work I think that most laptops have glitches like that and no doubt I could help fix it in calibrating the pad (?) touch I did have time to consider the issue and yet if... There are a few other things well and more disturbing than this morning I got an error of video material, so now im a little just worried or suspicious that it may be a real fault with him and would like to know if it is the case, if its something I can fix eventually (im no expert especially with the material, but I can always try to download and installation of updates / corrections and this kind of thing so she could solve the problems).

  The main thing that concerns me more, is that this morning a message suddenly come to the screen, warning me that there was an error in video material, last night, I clicked on a button, I think for load more information. and I took this perforated cap of it: -.

  http://img528.imageshack.us/img528/724/errorscreencapcw1.jpg

  I thought it may be useful to view the actual complete message rather try everything and paste the info., ok to be honest I've not noticed it allow you to copy to the Clipboard, but good (oops lol).

  I know there is a topic on a similar error, but I didn't want end-to-end on this discussion because I assume that it should be for this mistake of people who will be discussed, mine may be slightly different, I don't know... I followed the instructions given in this discussion and I checked the Device Manager and no material defects are appearing, btw it is said in the Manager of peripheral devices, graphics cards, it's a Mobile Intel 945 GM Express Chipset Family, I'm sure that all laptops A200 15I have the same card, but I thought I would just make it clear that. Incase that wasn't the right thing to check I also checked under "Audio, video and game controllers" (as the error says it was a video hardware error) where it lists the only as being "Realtek High Definition" Audio and I checked the properties, both under properties it says that the device works properly, without signs of defects...

  The thing is, I had read somewhere online that there is a problem with the graphics or video cards. I had read that they can be glitchy and sometimes break after a year. I also asked my father about it and we looked at it as a graphics card Intel that came with this laptop, which it is, and we counted that the Intel chips is as reliable as any other brand really... so I don't think there should be a problem, well that is there I have until September next for repair prior to the expiration of the warranty!

  What surprises or sort of worry, however, is that the error message was only introduced to me this morning. It dates from error, as having occurred at 19:53. I use it at night last, and infact, I went to take a shower and I put the laptop down before you go take a shower at around 19:35, I assumed that its ok just close the lid and it would automatically go into hibernate mode or something similar (?) im wondering if that had something to do with it as I 19:53 would have been about when I came back and lifted the lid/screen again to use the laptop again... I can only assume, given the time, he cites, is what caused the failure?

  It gives me the option to "update driver software" and "hardware change analysis" in the Device Manager, can I run both, or one of those who maybe? is this a common problem? should I worry at all etc...

  Any help is very appreciated, if more info. Please let me know and ill clarify what I can. Also in terms of whats installed, I have quite a few programs, for graphics, I have an old version of Paint Shop Pro, which I installed it yesterday morning, it seems to install fine, it is Jasc Paint Shop Pro 7, I have also some programs of converter (for files vid, 3GP and other things), scan antivirus AVG, Spybot Search & Destory DBPowerAmp, FTP Commander, Quicktime and Real Player, pretty basic stuff like that, nothing, just my old photos and vid files I transferred from my old laptop XP to it, in my documents... I don't have all the Senior Games motorized or complicated or anything else like that installed. Also at that time, indicates the video hardware error message, everything that was in progress when I got the cover down (or before putting the lid down) would have been Windows Live Messenger (although I'm pretty sure that I registered before putting the lid down) and an IE window , im pretty sure that's it, I was not working on anything just check the ' net...

  There are other things I noticed as I thought that maybe I should mention (?), something I've noticed he's doing is the screen goes blank and then back very quickly, a lot. I already asked about it a day or so there at that time, I realized he was only doing that before loading the "Windows needs your permission to continue" window/message, who apparently its supposed to do and something to with the computer to switch to display the normal desktop to the secure desktop, I kind of understand lol.
  So I think that's not something to worry about but I noticed during the lastday, that the screen seems to do it more, goes blank then back again, even if the authorization message does not appear.

  For example, this morning, when I first put on and am went to check out my home page, I clicked on a link at the bottom of the page or anywhere where to load another page into the site and display deleted for a while before coming back a second later with the requested page. Is this normal too? or an associated Vista glitch, or is it possible that there may be a small problem with the monitor? Incase of im guessing it can be more than one thing in Vista, but I thought I would ask here, I decided to not pay for any extra insurance/warranty extension because I am very careful with my items and take care of them and so I'm being careful to try to spot defects early, while they may be repairable under the basic warranty and what-not...

  Another thing I noticed is that start with, when I pressed on and kept the 'FN' key, a variety of icons, black and white appeared on the screen that told me what F button (s) to use to make certain adjustments, there still is that when I try right now, but at other times, it does not show icons , no matter how long I hold down the "fn". That didn't matter because I can tell by the symbols on the keyboard press what buttons but its just inconsistent, is there a reason why sometimes the row of icons on the screen will appear when I press and hold the "FN" key and other times it doesn't show at all?

  Also sometimes if I move the slider to the right to the top of the screen, these icons loading as they always seem to be located at the top of the screen, but sometimes it's a problem, if im trying to click on something else and one of these icons rises instead... I'm sure that you can disable this option in sort , but I'd be worried that the icons do not always show when I press and hold the right Button (?) just try to be careful!

  I think that this post is long enough and I don't see what else I could possibly add to help, so I'll leave this here. I don't want to sound too paranoid, but thought it is better to talk about this kind of things incase someone recognizes these defects/errors and can recommend a way fast to resolve potential problems before they can develop into what whether it is worse... Thank you very much in advance for any help on any of these issues!

  (mods let me know if im wrong to include so many things in a subject, I fact kind of this quickly and I apologize if im breaking any rules, I don't want to, if possible please break this into a few different themes or I can do it, although ill be at work frm 2-21:00 today so maybe not back and able to check here until Thursday morning (October 4))

  Hey Isla

  Your message is really very, very long. I think it's too long to read twice ;) s

  . Regarding your questions on this laptop well. Looks like you have installed many applications and 3 third party programs. In such cases, it s not easy to say if these problems are software or hardware related. But I guess that its software.

  I checked your screenshot pic, but I've never seen this error message. But it looks like something wrong with the graphics driver. The message says something, live events of kernel
  The core services are required by other parts of the operating system as for example graphics card driver.

  In this case I recommend updating the graphics driver. According to you, this message an Intel GPU. So you can see the Intel page for the driver for the graphics chip compatible.

  With regard to the key issue of the FN;
  The Toshiba FlashCard utility controls the key features of the FN. I read in this forum that this application does not smoothly run and in some cases it causes some issues. The new update should solve the problems. You should check the Toshiba driver page. The utility of FlashCard is a part of the Toshiba value added package.

  So finally a tip more:
  You should always check the updates of Vista on the Microsoft page. This operating system is not perfect and Microsoft releases hotfixes and patches very often

  I hope that it would help a little.

  If necessary just ask for more information :)

  Concerning

• Troubleshooting with wireless - got a Satellite A200

  Well if someone could help me somehow, I'd greatly appreciate it.

  I have a Satellite A200 started just now sent me problems with the wireless connection. I'm not that great with computers but I know how to follow instructions and the basics quite well. I changed my router recently, its new with Netgear and that now I had problem with the wireless connection. Main computer works fine, USB wi - fi Flash drive works fine on another computer. Only the problem with my Toshiba. It identifies my address with full signal. I put the network key, it starts the connection, it starts acquiring network address and it fails.

  Then it starts to get into this loop, trying and failing. I went into network connections, try to fix it. He begins to repair and it does not work too.

  Am I missing something? I don't know where to start. I tried everything that was suggested under Configfree. But I still can't be the source of the problem.
  Any ideas? Thank you, in advance.

  > I tried to remove the security password and I am able to connect but as soon as I put it on, it's back to the same model?

  In my view, the case is clear, it seems that the WiFi encryption or password is wrong. If the router uses only 802.11 G then you must assign the card settings Wlan 802.11 G too!
  In addition, you must use exactly the same type of encryption (WPE, WPA, WPA2, etc.) for the router and wireless network card!

  PS: Don't forget that WLan driver is up to date...
  Here you can find the latest WLan Atheros, Intel and Realtek WLan drivers

  http://APS2.toshiba-tro.de/WLAN/

  Welcome them

• I need the firmware for a chicony cam on Satellite A300-14 s

  I had a lot of problems with my chicony cam on A300 Dungeon of freezing and to stop working so I think that update the firmware, so I search on the net for new firmware and I found one and install it... now my cam isn't working windows can see and it gives the device works but when I try to open Toshiba help cam its says the cam does not work and when I try to open it in PROG like yahoo, nothing happens.
  It s not even power up... so please I need the firmware original please please please...

  Sorry for my bad English :)

  Firmware for cam doesn t exist. What you can do is to install the driver for the webcam.
  What operating system you are using and what firmware you have installed finally?