Problems with installing XP on Satellite A200 - 13 M

Similar Questions

• Problem with Chicony camera on Satellite A200

  Hello

  I reinstall Windows Vista on my A200 PSAE6E
  Windows SP1 update
  and installed the drivers of all the

  I have a strange problem with my cam.
  When I start with the blue led camera assistant software shines, I can see an image (the image is not clear) for 10-20 seconds and then everything is black.
  I removed the camera assistant software and install again, but its still the same
  Device Manager showing me that everything is ok with Chicony USB 2.0 Camera

  Can anyone give a suggestion that do I do?

  Thank you very much

  You must install all the Vista updates... and I mean all THE Vista out!
  Then update the webcam software and clean the operating system using the CCleaner.

• Problem with driver sound on Satellite A200 under Win XP SP3

  Hi guys

  I recently bought a Satellite A 200 PSAE7. I had downgraded it to Win XP.

  Everything worked perfectly until last night. I restarted the laptop and I got no sound. I tried to reinstall the Realtek audio drivers, he succeeds, ask for a restart, but the sound is still not working. I tried everything, removing the drivers via Add/Remove programs and Device Manager and then put it back. When I restart it tells me 'PCI device detected"after I installed the audio drivers. But the sound does not work.

  Any advice?

  The problem is that you have not installed the MS patches that are really essential.
  I'm talking about the * patch KB888111, KB835221, and *.

  You must remove first the audio driver from the system.
  Then you must install two corrections.
  After restarting again, reinstall the audio driver that is on the page of the Toshiba driver.

  Best regards and good luck

• Problem with the wifi on Satellite A200 - 1-3 configuration

  My laptop is A200 - 1 3. The problem is that I don t have a wireless network. My other laptop has configured automatic wifi when I turn on the laptop for the first time. Who has not. He tells me to spend on something, but I put t know what it is. Please help me.

  http://www.picnote.com/download/279793852/Untitled.jpg

  Greetings

  Hello

  Take a look in the manual for the wireless switch. This will tell you how to enable the wifi switch. Although I'm not an expert, every Toshiba I used you also allows to use the Fn key + key F8 to enable wireless connections.
  If you do not have the manual, you can download it here, I think.
  [http://uk.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_manuals.jsp?service=UK]

  Best regards

• Need help with installing XP on Satellite P200-IEE

  I mucked up my work phone thinking I could convert vista to xp by myself, questions of driver and software is the reason. I bought an xp license and have the disc.
  My laptop is a Satellite p200-IEE. I downloaded what I thought, was that drivers sata (f6flp32) put in the xp disk and drivers as above on a floppy drive.
  It goes, however, loading, ask you to press s and comes then in place with the installer of txt - oem could not be found. Any ideas of what I can do I need my laptop for work Monday morning.

  HELP Please

  There are some problems with installing xp on vista laptop... After talking to toshiba agent he's recovery discs there to put xp on as a straight install normally fails by experience.
  Some won't take only short xp. (for one, made this mistake on a new laptop!)

  Your best bet is the recovery disc and screw with vista, but do not install service pack 1 again... There are questions. Sort of a work in progress for Bill and his friends...

  Concerning

  Published by: ADMIN

• Problem with keyboard on the Satellite L735

  (In English) I have a problem with my laptop model Satellite L735-sp3102w not use the CAPS LOCK SHIFT CTRL, x, v, m, know me how I can exclude a keyboard error or an error of configuration keyboard

  (Whenever I turn on the laptop turns on but the button Caps Lock off instantly) I hope that your help thank you

  Double post:
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=70664

• Problem with installing the game "no apps are installed to open this type of link try find at the store.

  Original title: problem with installing the game

  install a game but saying o\s

  No apps are installed to open this type of link try find in the store and when I opened store it for the app its available nt tried compatibility troubleshooting but no use it please help

  Hi harsh,

  For a better understanding of the issue, I would need more information on your side.

  1. What is the name of the game you install?

  2. where did you install the game from?

  3. What is the full error message?

  4. the question facing you while opening the store Windows or you are looking for an app? Have what compatibility troubleshooting steps you tried?

  To resolve the problem with applications, I suggest you try the procedure described in the article and see if it helps.

  Solve problems with a soft

  Please provide the necessary information to help you further, I'll be happy to help you.

• Big problem with installing ESXi 5.5 on Cisco UCS M200 B3

  Hello

  I have a problem with installing esxi 5.5 on SDcard mounted in Cisco UCS B200 m3.

  ESXi Show map SD but when to start partitioning I question (attachment).

  If I install ESXi on HDD I don't see SDcard (even from the console).

  Thanks for any help

  h

  Marcel

  Hello

  Thanks for the reply but SDcard are clear. map of are new directly from Cisco.

  The good news is that I found a solution. I install the old version of ESXi (5.5 U1) and everything works fine

  Concerning

• Problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo)

  Hello

  I have problem with instalation VMware server 2 on Debian Lenny (linux-image - 2.6.30 - 1-686. bpo). The problem appears in the last step of the instalation during construction of the vmmon module I installed VMware server 2 on Debian Lenny (linux-image - 2.6.26) according to http://www.howtoforge.com/how-to-install-vmware-server-2-on-debian-lenny and Vmware has worked well. Now, the instalation ends with the following output:

  Extract the sources of the vmmon module.

  The construction of the vmmon module.

  Using 2.6.x kernel build system.

  do: enter the directory ' / tmp/vmware-config1/vmmon-only '.

  do /lib/modules/2.6.30-bpo.1-686/build/include/ - C... SUBDIRS = $PWD SRCROOT = $PWD. modules of

  make [1]: Entering directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  CC /tmp/vmware-config1/vmmon-only/linux/driver.o

  In file included from /tmp/vmware-config1/vmmon-only/linux/driver.c:31:

  /tmp/vmware-config1/vmmon-only/./include/compat_wait.h:78: error: conflicting types for 'poll_initwait '.

  /usr/src/linux-headers-2.6.30-BPO.1-common/include/Linux/poll.h:67: error: previous declaration of 'poll_initwait' is here

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriverSyncCallOnEachCPU ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1423: error: too many arguments to function 'smp_call_function '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c: in function 'LinuxDriver_Ioctl ':

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'euid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1987: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'fsuid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1988: error: 'struct task_struct' has no member named 'uid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'egid.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1989: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'fsgid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:1990: error: 'struct task_struct' has no member named 'gid '.

  /tmp/vmware-config1/vmmon-only/Linux/driver.c:2007: error: too many arguments to function 'smp_call_function '.

  make [4]: * /tmp/vmware-config1/vmmon-only/linux/driver.o error 1

  make [3]: * error 2

  make [2]: * error 2

  make [1]: * error 2

  make [1]: leaving directory ' / usr/src/linux-headers-2.6.30-bpo.1-686'

  make: * http://vmmon.ko error 2

  make: leaving directory ' / tmp/vmware-config1/vmmon-only '.

  Unable to build the vmmon module.

  For more information about how to troubleshoot module, please

  visit our Web site at " " http://www.VMware.com/go/UNSUP-Linux-products "and "

  " http://www.VMware.com/go/UNSUP-Linux-tools ". "

  The execution is canceled.

  I appreciate all ideas of solution to this problem.

  Thank you Pavel

  Your kernel is NOT linux-image - 2.6.26 but (of output) 2.6.30 - bpo.1 - 686

  See this page for a fix possible (the problem is common also for workstation):

  http://www.insecure.WS/2008/10/20/VMware-specific-specific-55x-and-kernel-2627

  Or see this thread:

  http://communities.VMware.com/thread/188410?TSTART=0

  André

• Bad BIOS installed on the Satellite A200

  I had one laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty. I researched and downloaded many programs, but I don't have a USB floppy drive. I downloaded phlash16, created an autoexec.bat file and follow all directions I've read on different post of different Web sites.

  Can someone please help me to recover my BIOS using the virtual floppy drive to USB and can someone please give a process step by step on how to reflash the BIOS. My laptop is Toshiba Satellite A200. Please give me a BIOS for my laptop.

  Please email me [email protected]

  Any help will be much appreciated. Thank you.

  Hi mate

  > I had a laptop Satellite A200 and I downloaded and installed an incorrect BIOS. Then I restarted my laptop and it is empty

  I'm afraid, you will need to contact the ASP in your country in order to solve this problem of m

  Toshiba driver page contains no traditional BIOS updates but only focus on the Win BIOS update, this means that you will not be able to update the BIOS by using a floppy disk because you don t have a traditional BIOS version

  Get in contact with the ASO technician, they can help you!

• Problem of processor on the Satellite A200 - 14 d?

  Hello, I have a Satellite A200 14 d and I installed Vista. Recently, I downloaded CPU - Z and had a look at the details of the processor. There is one annoying thing: falls the processor speed of 1800 Mhz to 700 Mhz, whenever it is not being used, even if in the BIOS it has the fixed value and the computer is plugged in and power management it is set to 100% too. Is this a problem?

  Why is this? Thank you.

  First: no, this isn't a problem. I mean if you need preformance then the CPU will automatically until it s normal speed.

  With regard to the 1800 - 700 Mhz: I think the chipset made by himself. Maybe it s a powersaving feature internal. Weird is that the CPU does not work on top speed even if it s on fixed speed cameras. Usually it's REALLY NO problem since the machine is at your service with the speed you require.

  I think that it s more a subjective issue that is your point of view, which is certainly understandable because worried you´re. But I think you should live from your machine is not defective and works perfectly. (It would be another thing if the machine would crash constantly or if you have some bluescreens or another..)

  I hope that it s now clearer for you. :)

  Welcome them

• Installing WXP on Satellite A200 - 1P8

  Hi all

  I am trying to install Windows XP Home edition on my new Satellite A200 1P8
  But my hard drive is not recognized, now I looked on the internet and I have no Intel Storage Manager but I need drivers now for my Hitachi HTS541616J9SA00 (82801 HBM / HEM ICM8-M) so, where I can find these?

  Thank you very much

  I have an external floppy drive that works.

  Hello

  The Intel matrix storage manager contains the SATA driver that is needed to recognize the HARD drive and install XP on your laptop.
  You can use the external floppy drive floppy to include the SATA driver in the program XP installation, or you can create your own XP CD which includes the Intel Matrix Storage Manager too.

  I had some problems using the external floppy drive too and that's why I chose the second option. I used nLite freeware program to create an own XP CD with SATA drivers. It s really great. You must test it too.

  I think this could help you.

  Good bye

• Boot problem after upgrade RAM on Satellite A200 - 1 DR

  Hello

  I have a laptop Satellite A200 - 1 DR (with 1 GB of DDR2 RAM) and it is 5 days old. I bought an another 1 GB of Corsair RAM (DDR2 PC5300 5-5-5-12 as the first). The problem is that with both submissions the laptop not boots or boot boxes when the quiet boot option is enabled in the BIOS but windows Vista refuse to go or to restore.
  I also tested the memory only Corair on the first location of memory of the laptop, and it works perfectly (vista and memtest86).

  So I tried only two submissions on the second slot of memory of the laptop, and the two do not work: quiet Boot option on vista cannot go and memtest86 freeze after 1 sec. When the quiet boot option is disabled, the bios memory test freeze to 256 MB (with 2 memories it freezes at 512 MB).

  To me there seems to be a bug in the BIOS, you have any information on these bugs?
  Thanks in advance

  Hello

  a man who is not a bug in the bios. Have you ever heard of compatibility problems between the memory modules? The strange thing is that the memory modules can have the same features should not work together when they are not compatible with each other.
  You have two different manufacturers using different modules and pcb´s (printed circuit board).

  So if you're going to tell me what manufacturer's stock module I'll tell you that they are not compatible because I really know that privateers work right and good when you install corsair two modules (or how I want to say. TWO MODULES OF THE SAME MANUFACTURER).

  This is it and it s the same story in desktop computers. I have two desktop computers in my office at home and one of this for overclocking. I had a lot of modules in my machine, so I had a lot of problems at the time of the twinning of the two different modules. And that's the thing why I tell you this, because I really have knowledge about this thingys. :)

  Just buy an another corsair modules and put your stock on ebay module. You will see how your machine will work. Or better, bring back the corsair, sell your stock on ebay module and buy a pair of the best modules from kingston, you can get since the modules have absolutely no problems with compatibility.

  That's my opinion. And nothing to do with a few bugs of bios or something else...

  Welcome them

• Problem with Vista hit the Satellite X 200 - 20 s

  Sometimes during typing on vista, it will stutter and freeze. The time is very short. Is this a problem with vista or the laptop. The T7300 Core 2 Duo 2 ghz processor.

  Hello

  I have a Satellite Pro S200 and the same problem was with my camera. It s is not a hardware problem, it s more a driver related issue No. So, the best thing you can do is update your bios and keep your drivers up-to-date. Just check the download Drivers Toshiba site and make sure you have the latest drivers installed.

  I had resolved my stuttering (core2duo 2.33 Ghz, 2 GB RAM) by updating all drivers...

  That's all

  Good bye

• 3G BT Broadband Mobile (Huawei) problem with IE and Firefox, Satellite L300

  The L300 Satellite running Vista 32 bit.

  I have a connection Broadband BT and with WIFI or ethernet at home I can connect to the internet and go without problem.
  I also have the BT USB Dongle for mobile connection far from home, this is the problem.

  I can connect to the internet through the connection manager BT (the software that is included in the dongle and installed on the Satellite L300) and some dongles light and software see I am connected. Too, it is shown on the icons at the bottom of the computer screen.

  Problem is IE and firefox will open, but neither more, "cannot display this page' or 'Connection timed Out' my access provider Internet (BT) said this isn't a matter of Dongle it's a software issue.

  I know that it is typical of an ISP as much as the two BT lines did not know what to say,
  Funny it is... until last week it worked so I was away from home, I used IE then tried to do the full-screen page and then stopped with "cannot display this page". He has not worked since. I then installed Firefox to check that it was not just IE.

  I disabled my firewall and tried to connect, the same problems.
  My ISP said has the laptop computer connection selected an obscure port that IE of Firefox cannot find?

  If anyone can help?

  I'll go to MS and reinstall IE, I think now if the IE software "crushed" and changed some settings has firefox then tried to use the system corrupted settings?

  I have already downloaded again the BT Manager in BT connection

  Interesting problem.

  You are able to back up your data and run recovery?

  Or maybe just try a system restore to an earlier date.