Problem with clickable area CP7

Similar Questions

• Problem with restricted area 10.1.1

  I have a design that uses a slider to two pins to power the Board of Directors.  The board is a four layer with the mass and power on the inner planes.

  I tried the power supply Vcc on the header to NOT connect instead of inner power directly through the mounting header hole, but run a track on the top layer to the decoupling capacitor near which there vias to the plans of the power.

  I even if it wasn't a problem - just put out a Dungeon area under part of the header of the net power group.

  It works, but I always get a DRC:

  Select the netlist and DRC [frequency divider 2]<2010-03-15 15:45:44="">
  Rule design error: the object ' Pad: Type (THT) Name (2) share (J7) Net Clearance(1.0000 mil) (VCC) Hole(39.3701 mil) "in a place for net group area: power.".
  Verification of netlist and DRC filled;  1 error (s), 0 warning (s), 0 errors filtered;  Time: 0:00.34

  The only way I found was to watch a trace on the relevant layer all around the header and then use island of Delete/copper copper I knew from previous experience was likely to cause problems and leaves as a red herring in the layer.

  

  I realize I could just filter the error, but if I do that, when I go to export gerberas, Ultiboard always complains that there are pending errors.

  Thank you

  Dave

  HI David,

  It was me who had need of the moment. Now that I understand the problem, I can say that I did not have a better solution for you. I'll add a bug so that the export warning message does not appear for the mistakes of DRC that have been filtered, which would solve part of the problem.

• Problem with blocking are seeking a trial of the proxy element

  Hi all

  I Serial element that has two multimedia elements and the first is proxy so I want to block the event for the first time and seek and unblock while he finishes. So I am able to do this in case of weather but are looking I see problem looking for second asset is getting blocked and first media so I'm trying to get I get the exception.

  Error: MediaPlayer - method called on media null or is not looking

  at::MediaPlayer/getTraitOrThrow() [C:\Documents and Settings\amit\My Documents\Flash Builder 4\OSMF\org\osmf\media\MediaPlayer.as:1244] org.osmf.media

  to org.osmf.media::MediaPlayer/canSeekTo()

  [C:\Documents and Settings\amit\My Documents\Flash Builder 4\OSMF\org\osmf\media\MediaPlayer.as:794]

  No idea what could be the reason?

  Kind regards

  Amit

  Can you post your code?  I know exactly how you have modified the example series Composition with preload subelements.  I tried the first child of packing in a UnseekableProxyElement, and it behaved correctly.

• problems with click areas and navigation

  I am using Captivate 3, and I am inserting click boxes, and text entry boxes to engage learners. Click areas and text entry boxes, I am branching out as they fail or succeed. In my particular case, since it is a test, after one bad shot, I want to post comments on what they * should * have done and set up the film to return to the beginning, so they can try again. If on the contrary they succeed, the movie goes on to the next slide.

  When I publish this movie when I see not voluntarily, the film displays the comments on what they should have done, but briefly displays the next slide in the sequence, what it shouldn't do (since this would imply that they had done the right thing). After a few seconds, plug it as configured initially, but I wonder if there is a way to keep this next slide to appear automatically.

  Thank you very much for you help.

  Note that your break point the click box is just at the end of the slide.

  Try to change the timing of the click box so that it always starts at the beginning of the film, but the breaks to 2 seconds instead of 3.

  See if that prevents the second briefly displayed slide.  If not, try to keep this pace for the click box to pause for 2 seconds, but to the length of the blade at 5, 6, 8 seconds for the time that you set for the legend of the failure to be on the screen.  See if it works.

• History of email disappearing due to problems with Yahoo.

  Thunderbird running 31.7.0

  Two distinct from desktops running Windows 8 affected within 24 hours of each other. E-mail accounts run under IMAP and webmail full historical shows. However Thunderbird shows only the first 200 messages in each folder, which is in the Inbox, sent, etc. have all 200 emails, but from the start date. No more recent data does not load.

  We tried updating records etc but apart from the fundamentals, we are rather floundering.

  All the 'stated' solutions would be appreciated. Updates for Thunderbird will be made automatically but nothing on Windows systems has been updated in the period between you bird works very well and now

  Thanks to stakeholders

  We know that the problems with yahoo are underway

• Problem with order of clip

  This is a question and request for suggestions.
  I'm very new to using first Pro CS4 using VideoStudio for a long time. But due to a mutitude of bug and constant crashes, I just let fall on her and made the transition to the first.

  I begin to develop projects of AVCHD clips. My camera creates each scene as a file. With VideoStudio I had to use TSmuxeR to merge them into a single clip, otherwise it would just fall more take hours (literally) to start because she wanted to check each hook. When you have hunderds in a project it is a problem.

  Prime Minister handles this much better doing things in the background, but I had some problems with clips are reordered. Maybe my approach is all wrong and I'm open to suggestions.

  For example, I break the clips in segments that relate to a topic and put in a bin. So, in a project, I would have 700 clips into 10 bins with 50 to 100 clips in each location. And I might have a dozen projects which constitute a 'production '. But when I import clips (IE windows) the last clip always happens to be the first imported. It is a common windows problem which I do not know how to move. In any case, when it gets imported I then rearrange clips. Clips from your device name is a time code date as 20100514082312.mts which is unique and you can order by date very easily, but it is really hard to read.

  The problem that I seem to have if I take a bin (that' it'sbeen sort) and drag it to the timeline, the last clip gets always inserted first. I guess that the Prime Minister is to remember the order that the clips had import and not how I trie in the bins.

  Because I tend to move things around a lot, it is a concern to keep deting first clips and then put on the end of the sequence, etc..

  Is there a way to get around this? As do enforcement in the stick of bins, or order the clips by name in the time line or maybe bring imported in the correct order in the first place?

  Or is the way I'm doing this all wrong. I admit it's hard to give up the way I did things in VideoStudio which could impose some bad habits.

  There is something else you can try - select the media and to automate for the timeline. You can tell it to not add transitions and do not overlap, and there are options to overlay the clips in the order of sorting or the order of selection. Try to select clips in the order of your choice.

  If there is something else in the trash you want, like a sequence, you may need to select all, uncheck what you want and then automate.

• I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 10:08 minutes or so.

  I have a strange problem with my RAM supported by installers. When I check the activity monitor, 3 installers are open and they start around 80 MB memory RAM used for about 7 or 8 concerts after 10 minutes. I have to force them to quit, but I don't know what I am closing or why they open in the first place. Applications downloaded on iTunes?

  

  In addition, the Console has opened with the same message several times, but I don't know what that means.

  Any help would be appreciated.

  Hello

  The last is a picture of the Terminal window.

  Just because it lists 'Console' does not mean that it has nothing to do with this application.

  You have not said why or what you're trying to install so I can't help with that.

  You can use the activity monitor to leave their.

  After you select an item, use the X in a type of stop sign icon and confirm force quit.

  

  21:36 Thursday; September 15, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)

• I have a problem with icloud sharing photos that the photos are NOT sorted by the State but by the date of the transfer (which is very illogical for a trip Album,..)

  Dear all!

  I hope you can help me out here - I have a problem with a picture of icloud sorting in shared albums

  We took pictures to a trip with iphone5s and iphone6 + a Nikon J5 date and time everything is OK

  Loadin was don ewhilst travelling and at home, but the sorting is mixed seems to be loading date

  (even only took pictures of the iphone as a reference)   (all on iOS 9.3.2)

  you know a way the album gets re-sync or software where I could sort the photos in

  and then re - download to get the sorting so that by the time and date of the...

  Thank you very much in advance - it would be a big help (gibbest album with this problem is the honeymoon ;-))

  Shared albums are essentially photo streams. They will always show the photos in the order that add you them to the album.  If you want your photos to appear in a specific order, you must add them to the album individually, one by one, exactly in the order of your choice.  You cannot add all photos in an album at once - which will give unpredictable results.

  For example, to create a new album with your photos.  Then ctrl-click on the album and select "Keep arranged by Date, oldest first" to sort the album.  Now add each photo from the album shared individually.  There will be a lot of work.

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• I can get the signed to Hotmail, but I can't read my mail. Sorry, there is a problem with Hotmail right now Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.

  There are ten days began to have problems with Hotmail. Could isgn in but get the following message is displayed.
  Sorry, there is a problem with Hotmail now
  Hotmail was not able to complete this application. Microsoft may contact you regarding any issue you are reporting.
  I can email again and again my contacts but thats all.
  I then tried to do with Internet Explorer and it works fine. I don't like it is because I have problems with some Web sites.

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode

• Are there problems with Firefox 5.0 and 1Password 3.6.1?

  I started to update to Firefox 5.0 and noticed a message that the 1Password version I had at the time would not work with Firefox 5.0.
  Are there problems with Firefox 5.0 and 1Password 3.6.1?

  They say you need 1Password 3.6.0 or later to work with Firefox 5.0

  http://Forum.agile.WS/index.php?/topic/5319-Firefox-5-requires-1Password-360-or-later/

  http://help.agilebits.com/1Password3/firefox.html
  

• Are there problems with OS 10.11.4 and opening?

  Are there problems with OS 10.11.4 and opening?

  Upside down images in the mode list. There is no hope of any problem opening fixing. There will be no further development.

• Can I downgrade to version 3.6 to 4.0 Beta without losing my favorites? Are there problems with it?

  I have problems with version 4.0 beta and want to downgrade to the newer version. Can I download it and install it without loosing all bookmarks? Are there any known issues with this? What do I need to uninstall first 4.0?

  @rog.howe Yes, use Add/Remove programs. You should also see the right to earlier version next to the beta one.

• I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I have an iMac7, 1 with Intel Core 2 Duo 2.8 GHz, 2 GB memory, 500 GB storage, iOS10.6.8 and can update in 10.11.2.  must I do cela or are there problems with the upgrade?

  I don't know about other issues. There are always 'problems' with any upgrade. You weigh against the benefits. I know that you need more RAM. At least 4 GB, maybe more if you can. Don't forget that this system is produced at a time when most of the machines have + 8 GB RAM and when Apple said 'minimum' they really mean it.  I recently inherited a MacBook that has 2 GB of RAM and the Mavericks. When I checked the memory, the use of the system was using 1.95 GB = nothing to run applications!

• Problem with iTunes 12.3.2.35, other titles are visible, but will not play. How can I play? Thank you

  Problem with iTunes 12.3.2.35, other titles are visible, but will not play. How can I play? Thank you

  Can you describe what happens when you try to play these tracks?  Do you have an error message (If Yes, what does say)?  Are the visible but greyed out?  They were a symbol of an exclamation mark next to them?