Problem with connection in Folio Builder after update v26

Similar Questions

• Problem with registration to folio Builder, indesign.

  I created an application that I want to publish, but I can't sign via folio Builder. I've done several times before, but today, I only get the gray weel when I try to connect. Im am stuck one can not publish my application. How can I get it work?

  Hi Christophe

  I know it's a long time ago. And I forgot to get back to you. But the problem solved itself, when I ran an auto upgade of DPS Apbuilder. So now I can get to my folios with CS6 reinstall them and everything is good :-)

  Good day!

• problem with connection to the internet after installing Windows 7 on new hard drive

  I have problem with old hard drive, so I change. I replace it with a new drive of the same size, so I download the Windows 7 disc to reinstall it. I received the product from the bottom of my laptop key. all look good, until when it is I can't connect to the internet. I can't find also manage network connections on my computer. When I go to "change the map settings" nothing is there. "when I go to connect to the network, not connected to the top pop, then I'm going to shoot bad to say" windows did not detect a network card installed properly, if you have a network card, you will need to re install the driver. "windows can't find a driver for your network card. Please help my fix to this problem. Thank you.

  You must download and install the driver for your network card.  It is best to get it fron the computer manufacturers web site.  You will have to get on another computer and copy it to a Flash DRIVE or a CD to run on your.

• Unable to connect using Face Time after updating iOS 9.3

  Unable to connect using Face Time after updating iOS 9.3

  gshort319 wrote:

  Unable to connect using Face Time after updating iOS 9.3

  Use FaceTime with your iPhone, iPad or iPod touch - Apple Support

  Get help if you cannot make or receive calls FaceTime - Apple Support

• I have a problem with connecting to Skype, get error code 1001 on my event viewer

  I have the latest version of Skype installed and have not been able to connect. I had Skype for over a year and my computer has developed a problem with a memory stick and after that I came back from the repair shop, it didn't work. They had removed Skype from my system so I reinstalled and cannot connect.

  And this is related to the Windows XP files, folders and search for how?

  Ask here:

  SKYPE FORUMS:
  http://Forum.Skype.com/

• Problem with my cc speedgrade since I updated my laptop for windows 10

  Hi, Pleas help me!

  I had a problem with my cc speedgrade, since I updated my laptop for windows 10. whenever I want to start speedgrade there is an error warning that tells me speedgrade does not work? did anyone else have this problem or someone has an idea to fix

  Best regards

  Jan

  Post edited by: Kevin Monahan

  Reason: The title was too long

  Hello

  I just solve my problem... Directory settings user removed from SpeedGrade and now everything is fine!

  C:\USER\xxx\AppData\Roaming\Adobe\SpeedGrade\9.0\

  Christian

• Problem with the redirection email Yahoo after installation of nine updates

  Original title: problem with transfer of emails after having installed new updates

  I installed the windows updates nine but a few days ago since then have had a problem with the redirection of emails coming into my inbox on my BT Yahoo mail account. When I get the Outbox until you find at least half of the time the "add recipients" does not work despite all the efforts, which means that I would put in manually email addresses (long and painful). My windows mail forwarding system seems to work OK. -Wood Marcus * address email is removed from the privacy *

  Hello

  1. What were the updates that have been installed on your computer?

  Check out the following link.

  See the Windows updates are installed

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  2. don't you configure e-mail account Yahoo BT in any e-mail client? Example: Outlook, Windows Mail.

  3. you use Internet Explorer to access BT Yahoo mail account?

  If you have configured the account BT Yahoo mail on the mail client, post of additional information to help you more away or well you could contact Yahoo Mail Support forums to help you best. Check out the following link.

  http://answers.Yahoo.com/dir/index?link=list&SID=396546091

• problem with windows mail (using Vista) after automatic updates installed

  After the installation of the automatic update of windows I can't receive or send email on windows Messaging.  Get the box asking username and password and when I did, he asked again.  Have checked all the settings and they are as before the problem started. Is there a problem of backward compatibility with one of the windows updates?  I can access my email on the site, so is not their problem but with my computer.

  Hello

  Try the following methods:

  Method 1:

  Try to download and reinstall Windows Mail using the link:

  http://support.Microsoft.com/kb/941090

  In the link above, go to download and install the update.

  Method 2:

  Solve problems with Windows Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  Reference:

  Working with Windows Mail in Windows Vista

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

• Problems with some sites to display after the installation of updates.

  Original title: Display problems

  I have some display problems with certain websites.  The appearance has changed after the last windows update.  For example, in Facebook to backgammon, displays boxes outside and I can't see the full picture in the other boxes or scroll down to see it.  Any ideas?

  Hello

  Thanks for choosing Microsoft Community to post your question!

  According to the description above, it seems that after installing the updates, you are facing some display problems with certain websites. I'll be happy to help you.

  I would be grateful if you could answer the following questions:

  1. What is the number of KB of the installed update recently?

  2. what browser do you use?

  3. What is the brand and model of your computer?

  While you reply us with the above information, we will update the video card driver and turn on compatibility mode (this applies only when you use Internet Explorer).

  See the following suggestions.
  
  Method 1: Refer to the following link suggestions.
  Some sites Web may not behave as expected in Internet Explorer

  http://support.Microsoft.com/kb/956197/ro

  Method 2: Open Internet Explorer in no mode control the Add - ons.
  a. click the Start button, then select all programs.

  b. click on Accessories, then select System Tools.

  c. click Internet Explorer (No Add-ons).

  If your browser seems to work correctly in Internet Explorer (No Add-ons) mode, you can use the add-on Manager to disable all add-ons and then turn on modules only as needed. This will allow you to figure out which add-on is causing the problem.

  Method 3: You can update the display driver.
  Check out the following link to update the display drivers.
  

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  For all windows questions do not hesitate to contact us and we will be happy to help you.

• Cannot connect in Folio Builder in InDesign

  Hello

  I'm unable to log in the Folio Builder Panel in InDesign. I'm on CS6 and I all relevant updates. I leave InDesign and restarted my computer. I can log into the dashboard online and all I know is not a problem with my login information.

  I click on the link 'connect', the distinctive sign of Adobe in the window appears, I put my information and it goes. I head back to InDesign and all that is in there is the text "connect" again.

  Someone at - it suggestions?

  I was able to connect earlier. I don't know what the problem was, mostly because it set back a day's work, but I guess that's just the way it goes sometimes

• CS5 Folio Builder Panel Update - missing Panel

  I've just updated the Panel Builder Folio for CS5 on Mac to the latest version (January 26, 2012) and when I run InDesign, Folio Builder Panel is gone. In addition, CSLive Panel gives me a message "internal error." I installed the updates on my PC for CS 5.5 and everything seems to work. However, I need to work in CS5 for this project. Is this a known issue? How to remedy the situation? In which case it is important, I've also updated producer Folio tools (January 17, 2012), as well.

  So, I ended up finding all ironed out, though it took a few hours of trying different things. Essentially, the Folio Builder Panel was installed, but Indesign did not see it. I tried to uninstall and reinstall Indesign, but which does not remove the Panel Builder Folio and has not "updated" it becomes visible.

  In the end, I had to go through the app records and manually uninstall the extension. After the relocation, the Panel stood. However, a new problem appeared. InDesign has tried to connect to my account but just turn and nothing happening. I could not cancel the in attempt to "sign". Finally, this has been resolved by opening the key ring and removing the entry of Adobe there allowed me to retype my credentials.

  Phew. Thank God, it's on. (until the next update, that is).

  If all goes well, this can save others some time that can run in this. Looks like it was a little lucky.

• Cannot connect to Apple ID after update to iOS 10

  You use an iPhone 6s, updated to iOS 10 yesterday. Immediately after the update, I found that I can not access the App Store, my music, or iTunes. There is no error message or prompt open a session my Apple ID, he said only: "loading" but never actually connects. Someone suggested a disconnection from the App Store through my settings so I tried. I've disconnected successfully but can not reconnect. I tried a dozen times to reconnect and one of the two following situations happens: I hit login and nothing happens or the prompt, I get my info and nothing happens. I rebooted/restarted my phone several times, connected on iTunes via my PC (successfully, but affects only not my phone) and put to update to iOS 10.0.2 but nothing never solved the problem. Help!

  Hi there, trekalong!

  Thank you for joining the communities Support from Apple! Looks like you are having problems with the App Store. The good news is, there are a few items with steps, you can try to solve the problem. Read this article with the steps toforce a nearby app on your iPhone, iPad or iPod touch. This will allow you to close the application you are having problems with.

  Then, check out this article with the steps to restart your iPad, iPhone or iPod touch.

  The next thing you might want to try going in settings of the iPhone and then Reset. Once there, tap reset all settings. This will reset the settings of the iPhone, but does not erase personal information such as pictures, music or contacts. However, it will remove a connection Wi - Fi and VPN settings, so do not forget, you have these settings and passwords ready for iPhone upward starting.

  If this does not work, it would be a good idea to make sure that there is not a problem of software as the cause of this for you.

  1. Read this article to know the steps for backing up your iPhone, iPad, and iPod touch.
  2. Use this article for steps to use iTunes on your Mac or PC to restore the iPhone, iPad or iPod to factory settings.
  3. Once this done, set the phone like new and the phone to see if the issue is still being tested. Follow this link to restore your iPhone, iPad or iPod touch from a backup

  Have a great day!

• Problems with outgoing mail / STMP server after has worked for a LONG time...

  Recently I started having trouble with sending an outgoing message. Beyond out lickety split with no problem. Now, once I click on SEND, I get window to send the Message reading "status: connected to stmp.primus.ca...» "but the progress bar continues just to go and go and... rather than a telling me the message has been sent."

  Sometimes the email finally gets sent, after taking in "shipping time E-mail" what's FOREVER, sometimes by that email is not to all and I get the message "send message failed. The message could not be sent using SMTP server smtp.primus.ca for some unknown reason. Check your SMTP server settings are correct and try again or contact your network administrator. »

  I looked in my SMTP settings and noticed that, in aid of Primus, he said the outgoing server port is 465 while mine has been implemented (and worked for ever) 25. I have also noticed that help Primus said connectivity should be set to SSL/TLS, while that mine has been set (and has worked forever) to zero. I made these changes (first simply by changing the port #, then both) but this does not solve the problem.

  I've recently updated Thunderbird to 31.7.0 and I think that these questions CAN coincide with this update, but I am not sure of the time. If this is the case, is it possible that I could get back to the old version of Thunderbird... or move in this way another? ID of the update was not the questions, someone has an idea or an idea on why this would suddenly be a problem with Thunderbird?

  Or should I contact Primus technical support and try to sort it out with them?

  Thanks a lot for listening.

  Your anti virus got an update. We get a rash of these every time updates to Thunderbird. The cause is always an anti virus program. usually, Norton or Alvira, but they all get a mention.

• Strange problem with connectivity

  I had this problem with one of my computers I'm trying to connect to my router ea6500. I have several wired devices and wireless but who are working very well, the router gives me the questions recently and I had to get back to the form of the plant. Once I had setup the configuration again, one of my computers which had run fine before has an interesting question.

  The computer appears in my router with it's normal internal IP address. And my computer is saying that it is correctly connected to the internet. The question? It is not. All my other computers and devices are excellent connections without interruption of service whatsoever. No idea what could cause this kind of problem?

  After crossing, my pilots had messed up a stored parameter which was preserved through updates to pilot. I had to uninstall and reinstall the driver for my machine to fix manually Ethernet controller.

• Problem with connecting to Windows normally

  OK, so I'm having a problem with a record in my laptop normally and the only way I can get to it is by going to safe mode.

  Basically what happens is that whenever I try to connect my computer normally (not in safe mode) I'll type in my password press enter it will come with the welcome sign and this small circle that tells it to load but it never is as if this drive does not work because the lamp flashes not or anything like that. However, it is very well whenever I login in safe mode and that the laptop came with windows vista on it that I don't have a copy of windows vista to try and slove the problem. This problem acerd after I restarted my laptop because it was slow and contributing generally to make it work properly again, but now this has happened and I don't know what to do.

  If someone could help me? I really need my laptop back to normal because right now, it's my only access to internet that not working I really on heavly for my college.

  Thank you for taking the time to read this and thanks for teying to help me.

  Hi Lexiey,

  A. recent changes made on your computer?

  B. you get any error message?

  You can start in safe mode, and then you put a computer to boot and then restart the computer in normal mode controls whether the issue persits.

  A clean boot helps eliminate software conflicts.  Let us check if software is causing the problem by following the clean boot procedure.  To perform the clean boot procedure, follow the instructions in the link below.

  Step 1: Perform a clean boot
  Step 2: Enable half the services
  Step 3: Determine whether the problem returns
  Step 4: Enable half of the startup items
  Step 5: Determine whether the problem returns
  Step 6: Resolve the problem
  Step 7: Reset the computer in normal mode and check if the problem persists.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135

  After checking the problem, turn the computer back to the Normal mode. Uninstall or update the program that is causing the problem.

  I hope this helps.

  Bindu S - Microsoft Support

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]