Problem with creation of table of references notifier by using a loop
Hi all
I am attaching two try_ChannelsOn2ndMonitor.vi screws out of the random values to four graphics and ChannelGraphsOnSecondMonitor2.vi receives these values through an array of references Notifier and refers to four corresponding graphics. Essentially, the graphics in the two screws are supposed to - and do - displays the same values.
As a first step, using a loop to create the table of references of the notifier, I was unable to get the four graphs in the sub - VI to produce the desired values. They showed only the values in Figure 4 in the main VI. I tried to use the indexing, and then I tried using Shift Registers associated with the function of 'Building the table', but none of these methods worked. Finally, the only method that worked was that you see in try_ChannelsOn2ndMonitor.vi, which was to create four reporters simultaneously and combine them using 'building the table '. My question is: why is it not possible to create the array of references notifier by using a loop and always get the correct functionality? I spent a few hours I wondered about this.
All of the comments related to my use of the notifiers, notifying bays or the reference of VI in the Structure of sequence are also appreciated. The structure of sequence is only there because the sub VI must be taken out of a second monitor; I essentially disabled it by setting the FP. State to 'Standard '.
Thank you!
Nemanja
The table is still the order of the references notifier - so that you know the correct order.
When you say "it will continue execution as soon as one of the notifications is received", do you know if it means he will send this notification for each registrant, or just for the appropriate warning system?
I'm waiting on multiple notification - if you expected to return (and continue to run) once it receives all notifications I don't think it's what he does based on my understanding of the documentation.
OK, now that I have had a good look, I probably slightly different framing the code - I propose the Subvi out of the while loop and then put a while loop around the code in the Sub - VI. Something like this:
That's what I wanted to say to have individual loops for the Subvi - terminal error is connected to the judgment for loops (and thus the VI) stop running when you release the notifier. That should remove the need for static VI reference as the VI remains before the end of your first level VI - then you can move your code of positioning inside the Subvi.
Using the sequence of structures here as you have done to make sure that the code block happens before your start of loop is very good, another common method is to wire the error out in (or at) the border of the loop - in a more complicated application, you would maybe put this code in a State 'init' of a state machine.
Tags: NI Software
Similar Questions
-
Problem with a light Table in Bridge CS6
Hello! After a re - install (which does not solve the problem with PS), now, I find that, when you use the light table in Bridge CS6, and after hitting the SPACEBAR, if I then click on the image, it goes to the size of 800%! Before the uninstall and reinstall, it has perfectly worked by taking images at 100% size.
I hope someone can help...
Thanks, farming
Why you reinstall photoshop cs6?
What operating system do you use?
You reinstall all updates Photoshop cs6 by going to help > updates within photoshop cs6?
After you enter the light table, use your mouse wheel to zoom to 100% and leave the light table.
The next time you go to the lightbox and click on the photo, it should only go to 100%.
-
problem with creation of file resources Eclipse plugin (or 1.0)
I have problems with the creation of a resource file using the Blackberry for Eclipse version 1.0 plugin (later).
(1) I which is the main project in the workspace, right mouse-click and click New | Others.
(2) in the "Select a Wizard" dialog box, select BlackBerry | BlackBerry resource file and click Next
(3) in the 'new BlackBerry Resource File' I click on the name of main project, which informs the "enter or select the parent folder" box.
(4) I type a name for the resource-"res.rrh" file in the "File name" box
(5) the following buttons and complete stay outside grey-ed. Only the advanced buttons, back and cancel are available.According to the online manual for the plugin, the finishing touch should be available at this stage.
At the top of the window, he said "Selected paretn should be under the source directory of the eclipse. What does that mean? I tried the project file and each directory in there. This message does not disappear and the buttons remain out of grey-ed.
How can I create a resource file using this plugin?
Pau
I discovered the solution. Under the {project} \src directory, I had to create a new directory called Resources. Then I was able to follow the steps I gave initially and could choose resources such as the parent directory. The button become clickable.
No where in the documentation of BB he said I needed to create a directory under CBC before doing the steps documented.
-
So, today I received my new 9320 at Virgin Mobile, first Blackberry & love the phone! but I can't use the BBM or Facebook app...
At first I could not even access the browser while that connected to my wifi... then I phoned Virgin & they helped me to reset the settings on my BB that I could use the browser etc...
I thought it was problem solved, until I discovered BBM and Facebook, use app world separate service? Anyway, I phoned up to Virgin because I wanted to do this job, they are included in my package & I did not understand why I can't access any of them...
After a long phone call the problem has proved that the "host routing table" was empty and (according to in Virgin) there is a problem with new BlackBerry receiving these details... they said this isn't a problem on the end there & told me there is nothing more they can do so to click 'register now' and wait for the details...
24 hours later and nothing, so I hope someone here can help me, make me a BB the whole point is things miss me actually lol and I feel now I'm paying for a phone contract I can't really use it, without any help from my provider?
Any help?
Or
Anyone with a new BB knows something like that recently? Thank you
Wow... Virgin you gave really there. You see, you PAY for 100% of your services and 100% of your formal support... at the moment, they seem to be or you deliver. Only they have the ability (in fact the RESPONSIBILITY!) to degenerate RIM requiring improved support of cases (from your description, it must be that... with a HRT empty, nothing that anyone here can do). End users have no free path to receive assistance from the RIM at all - only via the escalation. So, what I would do if I were you, is their ring back... but this time do not let you fob OFF... insist that, because you HAVE them, you have a contract with them and they are about to be in violation of this contract - they must solve your problem, degenerate into RIM if they wish.
Good luck!
-
Problems with slot-shaped table and set the values of column
Hello
I have a problem with a tabular presentation.
I have two tables
P_detail and table v_master
columns of v_master:
v_id
v_Name
v_info
columns of p_detail:
P_ID
p_master_fk
p_name
p_info
I want to have a tabular presentation where I can store permanent data retail values. That's why I want to keep the default main column join the detail columns.
In SQL, I can do this with an outer join:
SELECT m.v_name, d.p_master_fk, d.p_name, d.p_info
OF v_master, p_detail
WHERE v_id = p_master_fk (+)
I get the lines that exist for the master data and can add values for the columns of detail. I removed the "add lines" because that makes no sense, because the amount lines are already offered at the opening of the tabular presentation.
Now, I want to get/save the v_id (main table) in the p_master_fk column value
How can I do this?
Thank you and best regards,
MatthiasHello
One approach is to use a database instead trigger. If you define a database view using the query:
SELECT m.v_id, m.v_name, d.p_id, d.p_master_fk, d.p_name, d.p_info
OF v_master m, p_detail d
WHERE v_id = p_master_fk (+)Then, create a trigger on the view that will insert in the detail table if d.p_id is null and update the secondary table if d.p_id is not null instead.
The Apex tabular form is then based on the view (with identifiers like hidden columns) and all treatments multirow Apex should work without modification.
Rod West
-
Hello, everyone.
I have problems with executing a DELETE statement on an Oracle 10 g server.
DELETE FROM tableA WHERE ID in (1,2,3)
If there is only a single ID for the IN clause, it works. But if more than one ID is provided, I get an error message "SQL command" not correctly completed. Here's the query as CF:
DELETE FROM TRAINING WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#"> AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
Someone at - it works with Oracle that can help me with this? I'm a developer experienced in MS - SQL; Oracle is new to me.
Thank you
^_^
So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.
-
Problem with the af:table links and views
I want to display a table with data from a database table called PERSON, so I use af:table tag.
The PERSON table has the following fields:
- PERSON_CODE
- PERSON_NAME
- PERSON_COD_STATE
The PERSON_STATE field is a foreign key to another table called PERSON_STATE:
- PERSON_COD_STATE
- DESCRIPTION
I created a view for the data of the PERSON (personView) table. Because I want to show the person status description in the af: table, I created another view for the data in table PERSON_STATE (personStateView). And I've also created a link between personView and personStateView.
In the column of the af: table that represents the State of no one, I drop the field 'description' of the State view linked to the view of anyone.
When I run the JSP, the State is not displayed correctly. All persons are displayed with the same State.
During the test directly with the application module, the display link works correctly.
View links inside an af:table work?
I work with ADF 10 g.
Thank you
Your scenario should be treated with a sql (VO on two EOs) join with a relationship master / detail. The table will be able to browse the details for each master record to time stamping.
-
Automatic creation of table alphabetically references
Hello
I create a table where the first column of the line is automatically numbered. When a new instance of 'row' is created (using the Action in ES2 Designer) the first cell of the table must go up automatically.
I understood how to do this with numbers - (this.rawValue = (this.parent.index + 1)); but I have a table where I want to use the letters of the alphabet instead. (I.e. A, B, C, etc.) Is this possible?
If it helps, the maximum amount of rows in the table is 4. (D)
See you soon
RobHi Rob,
On the right track. If you create a table with the alphabet, then the script go to the appropriate letter, according to the line number.
Example here: https://acrobat.com/#d=Zk2XWWDUWNfG * VuRTNy5QQ
The script is also in the event layout: ready, so that if the lines are removed, all indexes will be updated.
Good luck
Niall
-
Problem with pop up adds and virus warnings when using safari
I have an iMac with OS version 10.11.4 2011 mid. Sites that I visit such as Ancestry.com, Google Maps and find A Grave.com, download pop up ads and new tabs open with warnings of virus heading towards various support sites, including those who say that Apple in charge. The pop up and new tabs who may or may not happen if often the Web sites are very slow to respond at all to give me the turning ball.
I closed several times tried to solve the problem in closing Safari, turn off my Wifi, then restart safari while pressing the SHIFT key, and then once that Safari has loaded, removing all data from the website and checking my making sure that my security settings is set to block pop-up windows up , and that my privacy is set to allow cookies and data Web site only on Web sites that I visit. Once I did this I activate Wifi. But it does not clear the problem. I also ran Clamxav with the latest virus definitions that found six files with extensions of .emix that have been found in my emails and phishing files.
I switched to Firefox as my default browser and have so far not had a problem with the pop adds up or virus alerts. And the Web sites I visit have been working properly.
What should I do to clear the problems I am having with Safari?
August 2015 topic adware detection and removal - https://discussions.apple.com/thread/7184089
Suggestions September 2015 by stedman1 - https://discussions.apple.com/message/28945970#28945970
Download and use MalwareBytes
-
Problem with the sync audio to video when you use Windows Movie Maker version 6.0
I have a HP Slimline Pavillion S.3220.uk PC, using Windows Vista Edition Home Premium. I have problems with the audio video synchronization when using Windows Movie Maker, version 6.0, I 'get' raw AVCHD files to .wmv using voltaic HD. I've noticed that the audio and video are out of sync, ONLY after the first thumbnail. No indirect problem with videos, but when people talk to the camera, in case of DISASTER, as he is out of sync. I tried to reduce the resolution of 720 p and 540 p, and no solution to the problem. Any thoughts on the matter please?
Hi Fabian119,
Today, there are hundreds of audio and video codecs in use. Some were created by Microsoft, but the vast majority of codecs have been created by other companies, organizations or individuals. By default, the Windows operating system and the player includes a number of the most popular codecs, such as MP3, Windows Media Audio and Windows Media Video.
There might be times, however, when you want to read the content that is compressed with a codec that does not include Windows or the default player (for example, a file compressed with the DivX video codec or the Ogg Vorbis audio codec). Because the player is extensible, in many cases you can download the necessary codec on the web for free or for a fee.
You can visit the following links for more information on codecs:
http://Windows.Microsoft.com/en-us/Windows-Vista/codecs-frequently-asked-questions
You can also view the following link to download the audio file conversion programs and check if you can convert AVCHD to Mpeg.
Convert music, videos and photos from one format to another
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Problems with the "CRM on demand - Outlook integration" when used through Citrix?
Hello all,.
We are implementing Oracle CRM On Demand and the Outlook integration for our users. We have few users who will connect to the system using citrix. I wanted to know if there are known problems with the integration of outlook with on demand when it is used through Citrix.
It will be great if you can provide me some details about the same.
Thank you
Abhay
Published by: Abhay s. on January 21, 2010 08:33We run everything although Citrix for Outlook and the application is hosted on Citrix servers. Personally, I have two sessions running at any given time...
One - Citrix with the application installed on the local server but personally, I don't use outlook via Citrix but do other users.
Two - I start Outlook on my local machine outside Citrix as well and it works fine -
Problems with 5.4 Mirage download reference CVD
Hello
I tried to go down my 5.4 Mirage ground infrastructure, but I continue to turn in questions with the CVD reference do not download.
I have two Mirage servers behind a Barracuda Load Balancer, and even if I point the Mirage customer directly to one of the nodes in an attempt to capture the reference machines I get the same error below.
Any help is appreciated.
Full download failure
Device ID is 3 ', CVD ID is 10003'
System.NullReferenceException: Object Reference not set to an instance of an object.
to Wanova.Server.Common.Database.CommonStorageOperations.GetPrimaryMongoVolume (ISession session)
to b__0 (ISession s) Wanova.Server.Common.FileSystem.OperationsWrapper.Sis2FileSystemErrorWrapper. < FindCurrentProblematicVolume >
to Wanova.Server.Common.Database.Storage.RunDbOperationInternal [T] (try Func 2 dbOperation, IsolationLevel isolationLevel, Int32, Int32 batchSize, IStorageRetryChecker retryChecker, String funcName)
to Wanova.Server.Common.Database.Storage.RunDbOperation [T] (try Func 2 dbOperation, IsolationLevel isolationLevel, Int32, Int32 batchSize, IStorageRetryChecker retryChecker, String funcName)
to Wanova.Server.Common.Database.Storage.RunQuery [T] (Func 2 doQuery)
at Wanova.Server.Common.FileSystem.OperationsWrapper.Sis2FileSystemErrorWrapper.FindCurrentProblematicVolume)
to Wanova.Server.Common.FileSystem.OperationsWrapper.Sis2FileSystemErrorWrapper.Wrap [T] (Func 1 action)
to Wanova.Server.Common.FileSystem.ErrorHandlingRemoteSis2FileSystem.BatchExists (IList 1 fileProperties)
to b__0 Wanova.Server.Common.FileSystem.BatchingUnit.HoardingFileSystem. < BatchExists > (IEnumerable 1 inList)
to Wanova.Server.Common.FileSystem.BatchingUnit.HoardingFileSystem.ChunkIntoBatches [TIn, everything] (IEnumerable 1 fileProperties, Func 2 application)
to Wanova.Server.Common.FileSystem.BatchingUnit.HoardingFileSystem.BatchExists (IList 1 fileProperties)
at Wanova.Server.Common.FileSystem.BatchingUnit.ManifestBasedCachingFileSystem.ProcessManifest (IStreamingManifest manifesto)
at Wanova.Server.Server.Upload.PrepareUploadCompletion.CreateSis2DedupIndex (IDedupIndex, dedupIndex, clear IStreamingManifest)
to Wanova.Server.Server.Upload.PrepareUploadCompletion.OnCompleteWithSuccess (IFileSystem tempAreaFs, onSuccess, Action 1 onError Action)
I was using a Dell FS8600 NAS back ends with Compellent SAN.
The problem was the storage subsystem. Confirmed by the creation of a file out on the network server and use it as my first volume. Operations have succeeded at this time.
Will have to study with Dell to find out why their device does not work with the Mirage.
Fluid FS version 3
-
problem with zero measuring table
I have a problem when I export my database
I have the exp script user
owner system/sys@db exp = test
and tables with zero degrees did not export the dump file
I need to change the table making the next step with 1 k to export the table
What is the solution without affecting the table?Details of the message of pl of the OS and database versions. I suspect this is related to the creation of segment carried into 11.2.0.1
http://download.Oracle.com/docs/CD/E11882_01/server.112/e17120/tables002.htm#ADMIN13319
There is no MOS 960216.1 Doc - Original Export triggers EXP-11 Table or Table is ignored
HTH
Srini -
Problem with populating a table of facts, of dimension tables
My goal is there are 5 dimensional tables created
Student-> primary key s_id, upn(unique pupil no), name
Rank-> key primary g_id, grade, exam_level, values
Object-> key primary sb_id, subjectid, subname
School-> key primary sc_id, schoolno, school_name
year-> y_id primary key, year (like 2008)
S_ID g_id sb_id, sc_id, y_id are sequences
select * from student; S_ID UPN FNAME COMMONNAME GENDER DOB ============================== 9062 1027 MELISSA ANNE f 13-OCT-81 ... 9000 rows selected
It's basically the dimensional point of viewselect * from grade; G_ID GRADE E_LEVEL VALUE ---------- ---------- ---------- ---------- 73 A a 120 74 B a 100 75 C a 80 76 D a 60 77 E a 40 78 F a 20 79 U a 0 80 X a 0 ... 18 rows selected
According to the given specifications, now need to create a table of facts like facts_table that contains all the primary keys of tables IMG as foreign keys in it.
The problem is when I say, I'll look at an example of smaller that the reality of dimension tables 5 let say there are 2 student dim tables, rank with s_id, g_id as the p key.
The result is a massive duplication as there is no join between two tables. But basically there is no common things between the two tables to join, how to solve?create materialized view facts_table(s_id,g_id) as select s.s_id,g.g_id from (select distinct s_id from student)s , (select distinct g_id from grade)g
Think of it as when I do for 5 tables the amount of duplication being involved, why there is not enough tablespace.
I was hoping that if there is no other way then don't create a fact table with just a column at the start
thencreate materialized view facts_table(s_id) as select s_id from student;
Then fill this column g_id fetching all the grade table g_id values using some sort of loop, although we shouldn't use pl/sql, I don't know if it works?alter materialized view facts_table add column g_id number;
All of the suggestions.TROPPER,
Your information, I have tried this test see if it works for you
DROP TABLE fact_1 CASCADE CONSTRAINTS; CREATE TABLE fact_1 ( s_id NUMBER NOT NULL, sc_id NUMBER NOT NULL, g_id NUMBER NOT NULL ) LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING; ALTER TABLE student_1 DROP PRIMARY KEY CASCADE; DROP TABLE student_1 CASCADE CONSTRAINTS; CREATE TABLE student_1 ( s_id NUMBER NOT NULL, student_id NUMBER, studentname VARCHAR2 (40 BYTE) ) LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING; ALTER TABLE school DROP PRIMARY KEY CASCADE; DROP TABLE school CASCADE CONSTRAINTS; CREATE TABLE school ( sc_id NUMBER NOT NULL, school VARCHAR2 (40 BYTE), schoolname VARCHAR2 (100 BYTE) ) LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING; ALTER TABLE grade DROP PRIMARY KEY CASCADE; DROP TABLE grade CASCADE CONSTRAINTS; CREATE TABLE grade ( g_id NUMBER NOT NULL, e_level VARCHAR2 (40 BYTE) ) LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING; CREATE UNIQUE INDEX fact_1_u01 ON fact_1 (s_id) LOGGING NOPARALLEL; CREATE UNIQUE INDEX fact_1_u02 ON fact_1 (sc_id) LOGGING NOPARALLEL; CREATE UNIQUE INDEX fact_1_u03 ON fact_1 (g_id) LOGGING NOPARALLEL; CREATE UNIQUE INDEX grade_pk ON grade (g_id) LOGGING NOPARALLEL; CREATE UNIQUE INDEX school_pk ON school (sc_id) LOGGING NOPARALLEL; CREATE UNIQUE INDEX student_1_pk ON student_1 (s_id) LOGGING NOPARALLEL; ALTER TABLE fact_1 ADD ( CONSTRAINT fact_1_u01 UNIQUE (s_id), CONSTRAINT fact_1_u02 UNIQUE (sc_id), CONSTRAINT fact_1_u03 UNIQUE (g_id)); ALTER TABLE student_1 ADD ( CONSTRAINT student_1_pk PRIMARY KEY (s_id)); ALTER TABLE school ADD ( CONSTRAINT school_pk PRIMARY KEY (sc_id)); ALTER TABLE grade ADD ( CONSTRAINT grade_pk PRIMARY KEY (g_id)); ALTER TABLE fact_1 ADD ( CONSTRAINT fact_1_r01 FOREIGN KEY (s_id) REFERENCES student_1 (s_id), CONSTRAINT fact_1_r02 FOREIGN KEY (sc_id) REFERENCES school (sc_id), CONSTRAINT fact_1_r03 FOREIGN KEY (g_id) REFERENCES grade (g_id)); ALTER TABLE fact_1 ADD ( CONSTRAINT fact_1_r02 FOREIGN KEY (sc_id) REFERENCES school (sc_id), CONSTRAINT fact_1_r03 FOREIGN KEY (g_id) REFERENCES grade (g_id), CONSTRAINT fact_1_r01 FOREIGN KEY (s_id) REFERENCES student_1 (s_id)); -- This should be the sequence you will loading data INSERT INTO student_1 VALUES (3, 1, 'Tropper A'); INSERT INTO school VALUES (3, 'new school', 'new school name'); INSERT INTO grade VALUES (4, 'a'); INSERT INTO fact_1 VALUES (3, 4, 4); commitl
Concerning
-
Problem with creation of DVD Windows 7
My creation of DVD Windows 7 stop decoding when you try to burn a DVD, it just sticks at about 2.7 and does not restart. PC Burns OK on other things
Windows DVD Maker any ideas?
My creation of DVD Windows 7 stop decoding when you try to burn a DVD, it just sticks at about 2.7 and does not restart. PC Burns OK on other things
Windows DVD Maker any ideas?
=====================================
Disable all filters in creation of DVD before burning
the DVD can be worth a try...See the following article:
How to burn DVDs with Windows DVD Maker in Windows 7
http://www.7tutorials.com/how-burn-DVDs-Windows-DVD-Maker
(scroll waaay down for...) What to do in case of problems)
Maybe you are looking for
-
A procedure has been asked to do a new installation of El Capitan on a newly installed ssd.
Where do you download El Capitan and Diskmaker-X, to make a bootable USB and install El Capitan? Do download you both in your downloads folder, insert a blank USB key and run diskmaker and this puts a bootable copy of El Capitan on the USB key? Or yo
-
Slate 8 Pro guard blocking turned off during playback
My HP (slate 8 - Pro) table that keeps blocking off after a few minutes even if sleep is set to 30 minutes. After a few minutes it just close the page and goes back to the home screen. Received from the centre of Service of Calexico in lieu of my or
-
Pavilion dv9910US Moving display (FWD/BKWD) causes of vertical lines and color changes
When moving the computer screen forward or backward through 90 degree open point causes fine vertical lines to the display, the background becomes bluegreen and the black test becomes dark red. Any ideas what causes this?
-
I want to buy a Dell printer, would like an HP printer... one that works with Vista... I print a lot of family photos and I want the best out there, regardless of the cost... I would very much help to someone who could advise me on this... and I wish
-
Hello the ASA does support FAST FORWARD SECRECY for TLS? BR Herbert