problem with deleting lines!

Similar Questions

• Problem with deleting line in the object view

  Hello
  
  I get the reference to the line of display object using pageContext.getParameter (EVENT_SOURCE_REFERENCE)
  
  can I remove this particular row of the view object using this reference...
  
  What makes the user does is...
  
  The user has created a line in the table using the addrows button and without entering the data in the same row that he wants to delete this line. In this case, we have no primary key to delete this line by performing an iteration using RowSetIterator
  
  Please tell me how to remove that particular line even I do not data in the same row

  Hello

  You can use the below (may be u require to change a bit)

  super.processFormRequest (pageContext, webBean); Am = (OAApplicationModule) pageContext.getApplicationModule (webBean) OAApplicationModule;
  Event string = pageContext.getParameter ("event");

  If .equals (event)) ("")
  {
  Get the identifier of the event PPR source line
  String rowReference = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
  Line OARow = (OARow) am.findRowByRef (rowReference);

  If (line! = null)
  {
  Row.Remove ();
  TRXN.Commit ();
  }
  }
  }

  Thank you
  Pratap

• Problem with deletion of snapshots

  Hello

  I have a problem with deletion of snapshots for virtual machine running on ESXi 3.5. I had a problem with the lack of free space on the drive where VM is hosted. I managed to free up space and wanted to commit snapshots (delete) to free additional space. Unfortunately, at the time of the withdrawal of clichés that I ran out of space again on this store now I'm stuck with clichés present in the store but not visible in the Snapshot Manager.

  Any suggestions on how I can get rid of these pictures now? All I can think is move VM converter of this virtual machine to a new one.

  Thanks, Marcin

  The reason that you ran out of space is the way a "Delete All" is handled.

  I guess in your case a 'Delete All' may temporarily need up to approximately 115 GB of additional disk space. Troubleshooting VM snapshot problems perfectly describes the process. Take a look at the animation in the "process behind 'Remove all' snapshots '.

  So what you can do is:

  -Free up enough space, create another cliché, and then do a "Delete All".

  -Cold clone or V2V the VM in another data store

  -Recreate the vmsd file based on the instantaneous channel from the header vmdk files and delete the snapshots one by one starting with the first (oldest) snapshot. If you want to try this make sure you fully understand other snapshots that it will end in the corruption of data!

  Due to the size and the possible impacts on the storage I recommend doing this during peak hours and with the virtual machine shut down.

  If you have a different available datastore (~ 300GB), I would recommend cloning. This does not affect the original files in case something goes wrong. If the clone works, you can safely remove the "old" VM and files and migrates the virtual computer is back to datastore original.

  André

• Problem with animation line flicker/aliasing

  Hi I was wondering if anyone had any suggestions on trying to get this smoother animation and a little crisper.

  I know that the quality will be slightly less good in a gif format.

  https://S3.amazonaws.com/uploads.hipchat.com/115279/3089179/b6GFClDGSBHAucu/lines.gif

  Thank you

  Let me give you a few basics. These are things that are not considered by almost everyone that starts working in the video, especially those who come from a print or web design background. Photographers are also victims of a flaw in their knowledge which is understandable because they have never had to deal with things like this before. Here are the facts.

  First Point:
  Video (and everything that comes from digital displays) are always arranged on a grid of pixels. No exception. You can never put a line width of single pixel on this grid of pixels and do appear as a single pixel line, unless it lines up perfectly. Nothing that is not precisely aligned to the pixel grid is interpreted. It is called Anti-aliasing. This means that if your 1-pixel thick line is to halfway between grid display will be the average of the values in this row and you end up with a broad line of two pixels on the screen with each line taking half the value of the color of the original line. In other words if you are not precisely aligned on the grid of your 1-pixel wide black line becomes a 2px wide gray line.

  Second Point:
  Video is composed of images that reading at a particular rate. Your screen also has a refresh rate. Display rate standard in countries that have 60 Hz electricity usually have a refresh rate standard 60 Hz or multiples of a whole number of this rate divider. In countries where electricity is 50 Hz (Europe), the refresh rate is usually 50 Hz. The video frame rate for video in NTSC countries (most of the world) are normalized to 29.97 FPS (there's a reason associated with the problem of broadcasting TV signals in color, but I won't go into that right now). The Standard in PAL countries video frame rate is 25 fps. When you choose a frame rate for your video project which is not the frequency of standard images for your area, you may rate for your video come into conflict with the cadence of your screen. This can cause perfectly smooth motion judder and there is nothing you can do about it, except change the refresh rate of your screen or lift it up with a new high refresh rate capable display or change the frame rate of your video.

  Third Point:

  The average human eye and brain have a property called retinal retention. These effects how we perceive motion. No matter what you do, most people perceive incorrectly flexible movement across their field of vision. Most of the time the brain tries to iron out things and your eyes automatically try and follow this movement. This effect is well understood by the great directors when they block shots and the great directors of photography when they put cameras if your eye is directed to the part of the frame where they want that to get you to understand the history.

  Fourth Point:
  There is a strobe effect that applies to all the movements. For example, if you watch an old movie on TV western, you will sometimes see the wheels of the car rotate backwards. Smart of an airplane propeller video phone can show you that strange Sword-shaped blades turn slowly or even backwards. It's the interaction between pace and movement. The only way to create videos that shows the movement correctly and in the right direction is to match the query of the cadence.

  Fifth Point:
  Work around the fine lines, turning it into a thicker lines is to disable interpolation. You can do in After Effects by selecting quality draft. With quality lit project, you will always have a thick black line of single pixel. This solves a problem, but worse the other. The problem of the stroboscopic effect. To make your single pixel with black line SOUPLESE you must match the query of the line to the frame rate. You move 1 pixel by image or 2 pixels per image or 3 pixels per image or 4. You cannot move to 1.4 or 2.8 pixels per image. It won't wok, it would never work.

  Sixth Point:
  Even if you perfectly fit the pixel grid movement, you can still run on the retinal retention problem and frame rates. Every Director of professional photography with a value of his day rate knows that there are critical speeds of Pan - speeds during which you can not move the camera in a scene and offer a scene that doesn't pan and look terrible. Jerking can be so bad that it gives people headaches and worse. The frequency of images the more cautious, be with the camera. When the video cameras of 24 frames per second were introduced a whole bunch of people came back with horrible images. Shots that run at 29.97 work at 24. Cadence, retention of the retina, strobe effect and your brain combined with no fixed focal point for your eyes to focus on and track combine to fault up to the shooting and of the query.

  The solution:
  When you want to animate a thin line, you're better off at 29.97 frames per second that anything slower. 30 is OK if you go never broadcast or DVD to watch on a TV. You can use an expression to control the movement, so that your line moves exactly an even number of pixels per image. If your design requires that go you faster you must hide the problem with motion blur. If you want to lighten in and clear it of movement then you must hide the problem of aliasing with motion blur. Smooth long moves must be exactly to an even number of pixels per image. You have more options of speed at a higher speed. Even at a higher speed, you will encounter the problem of the sixth Point.

  The evidence:
  Any problem of smoothing by giving you the discount gray lines load the rendering of your lines animated in AE and step as part of an animation at the same time. Baring any cache image and to make the issues I bet that your animation will run without difficulty from one image to the other. It is only when the video plays back at speed that your eyes and your brain will tell you that the movement is uneven.

  Certain standards:
  Go to a cinema and watch the end titles. It takes about 7 or 8 seconds (depending on the height of the frame) for securities to roll from the bottom of the screen upwards. The second seven rule is pretty standard. With 29.97 FPS 1 video per image pixel, 2 pixels per image and 4 pixels per image work well enough for most applications. When you find a speed frame rate works for your video, it's the frame size and it is write it down. Use it again and again.

  This is an expression that works at the speed of the animation and allows blur to apply to your image. You can do the movement meet the markers if you want to start and stop. I have a bunch of preset animations that I use all the time for that style of animation.

  Bottom-up:

  t = time;

  en = t/thisComp.frameDuration;

  x = value [0];

  s = 4; Speed in pixels per image must be an integer

  y = value [1] - (fr * s);

  [x, y]

  Left to right:

  t = time;

  en = t/thisComp.frameDuration;

  y = value [1];

  s = 4; Speed in pixels per image must be an integer

  x = value [1] - (fr * s);

  [x, y]

  If you wish to reverse the direction, you can add a sign less in the final table or apply the term of anchor instead of position. These expressions take the initial starting position of the layer as a starting point. Both are moving to 4 pixels per image. To start and stop the movement, the simplest method is to split the layer, add the expression, let the layer move, then divide the layer again and delete the expression. If you are handy with expressions, you can bind the movement to layer markers, and then just move the markers for start and stop, or even reverse the direction of a single layer.

  If you don't want to mess with all those unbreakable rules then jack up motion blur and uses a higher cadence with thicker lines and hidden defects. There are no other solutions.

• Problem with Delete Subproperty

  I wanted to delete a global container of Station with stored results init.

  The expression I used is

  StationGlobals.StoredResults.DeleteSubProperty (Parameters.Step.Name, 0x400000)

  Parameter.Step.Name is my search string. and in the Option property tried to use 0 x 400000 substitute variable Notdeletable.

  Problem here is that it works for the execution of a few as there is no problem in removing the Subproperty for 4 or 5 times. After that it only removes subproperty.

  And the same problem, I did not see in OperatorMode. This problem only occurs in the sequence editor. I use TestStand Ver4.2.1.

  Is there no work around for this or any other option to forcefully remove the subproperty.

  Thanks in advance,

  Christian M

  Larsen and Toubro Limited

  Mysore. India.

  Hi Share_Good,

  He had some problems with the file you attached. I made a few changes that seems to make it work the way you want and simplify things. I added comments to help explain changes in the file. Please let me know if you have any questions about the changes. I was unable to reproduce the error you posted, but I think that these changes could solve the problem, because one of the issues that I fixed in question is not cloning the property you obtained using GetPropertyObject before setting another property that has as it's the suproperty (property can have one of their parents If you need to make a copy and store the copy not the original). Also, make sure your Locals.StepResult is a variable of object reference as I have in the file attached sequence rather than a container.

  I also created a version of the file, SequenceFilePostResultListEntry2.seq, that uses an array of containers to store the results instead of the subproperties, allowing the stage names to be anything, including having spaces and '.' characters.

  Hope this helps,

  -Doug

• Problem with deleted game

  Hello

  I have recently uninstalled a game from my PC through Control Panel control/uninstall. But my problem starts when I finished tne uninstall. In folder where was a game that I uninstalled another game that has been deleted with the uninstallation of the first game, because the system has deleted all the folders and subfolders. Now, when I run the instalation of a game I acidentally removed with the uninstalaltion of the first part it is said: the game is already instaled. You want to start the uninstall? When I click Yes, nothing happens... A system can not install a game because it was not properly uninstalled and it "thinks" it is installed on my machine and cannot uninstall because the game egsists not really starts. I run Windows 7.

  Help, please. Thank you.

  Hello docleen,

  Thanks for posting your question in the Microsoft Community.

  I understand that you have difficulties to install a game that you deleted accidentally. I would certainly help you to fix this problem.

  To better understand the issue and provides that you open troubleshooting steps, we start with two questions:

  1. what game are you talking about?

  2. who was the game that you actually deleted from your computer?

  Please do not respond with more information on the topic to provide you with the best solution.

  If you have other problems with Windows, please post in the Microsoft Community. We would be happy to help you.

• Problems with the line below 1 pt thickness

  In Illustrator CS6, when I draw a horizontal line with the pen tool or the line tool, the weight of the line can be set below 1 pt.  If I draw the line at an angle, I set the line thickness to be less than 1 pt.  If I change this line from diagonal to horizontal position, the weight of the line snaps back on 1 pt.  Does anyone have an idea why this is happening or how to fix it? Thank you!

  Look to match the pixel grid
  Illustrator: Problems with snap to grid of pixels

• problem with adding line in tabular form after that put 4.1.1 to level

  We have recently installed the Update 4.1 .1. We now have a problem with some of our tabular forms created using the wizard. The delete and update feature works fine, but when trying to insert a new record, it will insert only the first record, but after that, it will no longer inserts. It acts as ApplyMRU (updated online Multi) is not at all shooting. No success or error message. I tried to create forms based on the rowid and also on the suites (with and without triggers), and they all behave the same way.
  
  This happens both in IE and Mozilla. Tabular forms were working fine before the upgrade.
  
  Everyone knows this?

  We just hit this issue and thanks to this thread and a light bulb above my head, resolved this question today. There is more to the story. Copy the necessary images in place works, but get the full version 4.1.1 images.

  We were already on 4.1.0.00.32, so I applied only Patch 13331096 upgrade to 4.1.1.00.23. Patch 13331096, at least one that I downloaded a few weeks ago IS NOT ALL OF THE NECESSARY IMAGES.

  Fortunately, I thought to download both. When I did a number of files in the directory images between the full version and the patch, the County came up short for the patch.

  If you have this problem, get your hands on the full release 4.1.1.00.23, NOT Patch 13331096and copy these files to image in place. Who sets the we.

• Oracle 10g - problem with "DELETE from TABLE WHERE ID in (1,2,3)" (use cfqueryparam)

  Hello, everyone.

  I have problems with executing a DELETE statement on an Oracle 10 g server.

  DELETE 
  FROM tableA
  WHERE ID in (1,2,3)
  

  If there is only a single ID for the IN clause, it works.  But if more than one ID is provided, I get an error message "SQL command" not correctly completed.  Here's the query as CF:

  DELETE 
  FROM TRAINING
  WHERE userID = <cfqueryparam cfsqltype="CF_SQL_VARCHAR" value="#trim(form.userID)#">
       AND TRAINING_ID in <cfqueryparam value="#form.trainingIDs#" cfsqltype="CF_SQL_INTEGER" list="yes">
  

  Someone at - it works with Oracle that can help me with this?  I'm a developer experienced in MS - SQL; Oracle is new to me.

  Thank you

  ^_^

  So much worse... a colleague just told me I should always use parentheses around the values in the IN clause.

• GREP to find the end of the name of the author of history (problems with several lines)

  

  I don't get these documents and I can understand how to use GREP to search for each source name/quote author. I have problems with the above example. I think it's because of paragraph returns, possibly something to do with the comma. I've fiddled around for an hour, tent multi and expressions of the one line and still can not understand.

  It's what works for the most part:

  (? < = \r)\s*[–][-\u\l]+(?=\Z)

  

  If you can count on having the line beginning with an en dash (possibly after an unused space), this should do it:

  ^\s*~=.+\Z

  The ^ indicates start of a line, while (?)<=\r) relies="" on="" a="" hard="" return:="" ^="" will="" also="" match="" start="" of="" story,="" and="" all="" sorts="" of="" hard="" page/column="">

  Do not "anticipate" \Z; Since it is also an indicator of the place, like ^ and $, there can never be "selected" in the traditional sense of the term. (Which is the reason why allowing you a \r postanalyse, because * will * be selected if not).

  Your example of Homer Simpson was rejected because of the hard return and the comma - or were in your list of approved characters.

  I think opt for the period more ('get all') should work, but it is not - by default - search returns. This is where the modifier of Single-Line can help you. A brief description of the single-line Mode is that it allows the period correspond to a return as well. the history is considered one long line, with possibly a few \r codes that are not treated as special programs.

  It will work for GREP search only:

  ( ? s)^\s*~=.+\Z

  but not for the GREP styles. A GREP style still works only for a single paragraph; You can have a \r code anywhere in the expression. Oddly enough, TI work if you draw a soft line break in this last line - the strange thing is, the style GREP also needs (? s), so, apparently, at this level the soft line break is also considered a line break.
  Furthermore, your example of Homer Simpson has an additional line below, and causing trouble because there is no \Z just after what you want to find. Allowing returns will add that last line in your search, which may not be what you want either. Replace the hard return by a soft will also solve part.

• Problem with deletion and Redownloading iTunes and Quicktime. Error: unavailable network resources

  Original title: trouble with deletion and Redownloading iTunes and Quicktime

  I am trying to remove iTunes in my computer through my control panel, but its telling me that it cannot remove, because of unavailable network resources.  I accidentally deleted quicktime then this all started.  Before iTunes was working.  When I try to re-download the ITunes it says that you must delete old version first.  Please help me someone with a great idea?

  Hello

  Step 1: Check if you are able to uninstall iTunes in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Pass through 'Verify iTunes and related components are completely uninstalled' in the article below: http://support.apple.com/kb/HT1923

  Then try to reinstall iTunes .

• problem with deleting safely removable media

  whenever I'm trying to remove my USB drive I get this error:

  This 'nom_peripherique' device cannot be stopped because its use in.

  Close programs use this unit maybe and try again later.

  so I go to Task Manager and close all programs I can think can possible cause the error

  and tried again, still the same result

  so I tried to close all programs, the list say except windows those needs to stay connected (were about 20 left) and tried again

  always the same stupid mistake.

  Microsoft can't make it so that it shows what programs are using the camera? or even better give an option to close the programs for you?

  Best regards

  Vermilion

  Hello

  ·        This happens every time every time you plug-in the device to the system?

  ·        Since when are you facing this problem?

  It may be that your USB flash drive is still using some of the system files or it could be that there is little file that is transferred to your system. Restart the computer and check if the problem is solve. It may be that some of the files on your USB device are corrupted or infected with the Virus. I suggest you analyze your USB devices with security software and checking, just to make sure that there are no corrupt or infected files.

   

  Step 1:

  Try to remove the USB device in safe mode and check. Follow the steps mentioned below.

  a. restart the system and keep tapping F8 until you reach the start menu.

  b. Select safe mode from the list and press ENTER.

  c. check to see if you are able to open the application without any problem.

  For more information, see the article mentioned below.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

   

  Step 2:

  Format the USB.

  Note: I suggest you to save important data which is present in the USB key given that formatting the USB device will erase all the content that is present in the USB.

  a. connect the USB device.

  b. Click Start menu and click computer.

  c. right-click on the drive letter (indicating the USB device) and click on Format.

  For more information, see the article mentioned below.

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a problem with deleting a password of a program in IBM lotus 123.

  Original title: IBM Lotus 1-2-3

  I'm under Lotus 123 97 on Windows 7.

  I'm having a promlem remove a PASSWORD in a program.

  I, ve been on SECURITY, then on RESERVATION, but from there I met problems.

  Any suggestions?

  Hello Norm,

  Welcome to the Microsoft community where you will get the best solutions for Windows related problems.

  I understand you have questions, remove the password of IBM Lotus program. The question you have posted is related to IBM Lotus and would be better suited to IBM Lotus support.

  I suggest you to check with the support of IBM Lotus for more information.

  http://www-01.IBM.com/software/Lotus/products/123/

  I hope this helps you get the password removed. If you have problems with Windows in the future, please post in the Microsoft Community.

• problem with delete in the OPS

  Hi all

  I have a problem in the functionality of deletion in the OPS,

  I have a table advanced with data when loading the page, because I have an icon to the trash, I'm clicking on the icon of deletion and the page, I am able to remove that line but he isn't deleteting in the database of this line.

  I tried below way.

  If ("updatedelete".equals (pageContext.getParameter (EVENT_PARAM)))
  {
  am.invokeMethod ("getUpdateDeleteData", null);
  
  }

  ---------------

  Public Sub getUpdateDeleteData()
  {
  XXXXXCONTAINLISTLINESVOImpl vo = this.getXXXXXCONTAINLISTLINESVO1 ();
  
  System.out.Print ("vo count" + vo.getRowCount ());
  
  Rank rank [] = vo.getAllRowsInRange ();
  for (int i = 0; i < row.length; i ++)
  {
  Rowi rank (XXXXXCONTAINLISTLINESVORowImpl) [i] = XXXXXCONTAINLISTLINESVORowImpl;
  If (rowi.getseltodel ()! = null & & rowi.getseltodel (.equals("Y")))
  {
  
  Rowi.Remove ();
  getOADBTransaction () .commit ();
  

  }
  }

  }

  You can help me thanks

  Thanks to all its solved, in fact my vo was not based on any OS is why it did not record data, aftre creating EO based VO it works

• problem with deleting snapshot

  Hi all

  I had a preview of the virtual machine on a server esxi 4.1, build 320137

  When I later (1 day) removed the snapshot (action to "remove all" in the snapshots in vSphere client Manager), I got an error saying:

  Delete all snapshots

  < myvmname >

  Cannot access the file

  < not specified

  file name > because it is

  locked

  root

  At this point is no longer the snapshot, according to the vSphere client as well as the command line:

  / vmfs/volumes/4cb6cf27-7 d 884680-68bf-00221965eca8 # vim - cmd vmsvc/snapshot.get 176
  Download Snapshot:

  (176 is the vmid of my machine)

  but in fact, the snapshot is always present, with delta 3 (one for each disc) of about 1 GB (it's a busy machine, with 1 disk 16 GB o.s.

  and 2 200 GB, nearly full drives)

  the question is: what can I do to merge the delta vmdk into their respective discs?

  Or what I can do to create 3 new discs containing all the data, for example using vmkfstools

  (then I'll replace it with these new old records in the vm configuration)

  Operations can also be done in turning off the State without any problem (night...)

  Thanks in advance,

  Andrea

  printing to see it regularly here :-)

  First, take a look at the contents of the virtual machine or watch the vmx to check file that VMDK is being used.

  one you have you need to consolidate the VMDK for this virtual machine must be downwards as in the contrary case, it locks files.

  and then you start vmkfstools-i/vmfs/volumes/datastorename/vmname/vmdk-from-vmx-file new.vmdk

  You will need to run it for all discs, you have on this virtual machine.

  This will consolidate the VMDK, but this alters the 'old'. You must then modify the virtual machine settings and remove the old drives and add custom discs using the new vmdk, you created.

  Once the virtual machine is running, you can clean the old files...

  Good luck