Should put it? and I need to replace the CPU? HP6200 + ASUS RADEON R9 280 ALBUMS 3GB PCI-E

Similar Questions

• Satellite A65-S126: I get error codes 7 and 4 - need to replace the internal RAM

  I was making mistakes first when I boot.
  Windows has a file missing or currupted (isapnp.sys).
  So I try to make a startup disk XP repair and while it is endearing to copy files, I receive other errror ' blah blah error code is 7 or 4.

  I did some research on all three errors and every difficulty unique potintial ram bad or bad Bios settings. I tried to reset the cmos and I've updated since the last version of toshiba. Always the same thing.

  I also replaced the ram with two sticks, that I had. The same problem. I think there must be some on board the cause of ram that I can get out the chip from the bottom and the laptop will always start and says it has installed 256.

  Where and how we replace RAM or what do you think?

  Thank you.

  Have you tested the memory? You can use Memtest www.memtest.org which is a floppy disk or a CD.

  Perhaps the error is just guessing what the problem is. File copy errors can also be caused by a scratched or damaged CD, bad CPU, defective HARD drive, faulty DVD drive or motherboard. If Memtest passes, then test the hard drive for bad sectors.

• I have a TravelMate 6592 G and you need to replace the video card.

  The original card is ATI Radeon X 2300 - H, which is no longer manufactured. Can someone tell me what the map is compatible now?

  Hello

  Unfortunately, you have a discrete graphics (Mobility Radeon HD 2400 XT) on the motherboard.

  This means that you need a new motherboard. It is not a graphics card for this model.

  Note:

  P/N: LX. TNE0Z.107

  Model: TravelMate 6592 G-602G16n

• Satellite L300D-10B - need to replace the HARD drive

  Hello.

  I have a Toshiba satellite L300D-10B and I need to replace the broken hdd in my laptop.
  It is a hitachi 160 GB at 5400 RPM SATA.

  Is it possible to move to a greater capacity (500 GB) and a little faster (7200 RPM).
  is - that someone at - he had success with any particular model?

  Hello

  In my opinion, is not a big problem to use a faster and larger HARD drive.
  The laptop supports the SATA HDD controller and this controller must be able to manage these drives.

  Welcome them

• Need advice replaces the screen HP Mini 2102

  Hey all,.

  I'm fixing a netbook HP Mini 2102 which was abandoned on the ground. The netbook works fine, except that now the screen is a little blurry and washed on the right side. Generally, when a computer screen is upward, trying to replace the converter display card, as was the case with a machine to HP Pavilion dv9000 I fixed recently.

  However, after dismatling the computer, I found no such ups on the screen, and after consultation with an HP support assistant very useful during a session of live chat who informed me that it is not a separate inverter Board available for purchase, I have come to believe that I need to replace the entire screen.

  If I'm not mistaken, the LCD part number is 589649-001 for this particular model that I am repairing. I created this post to confirm that the ups on this Mini Board can be replaced, and I need to replace the entire LCD screen - less camera, bezel and hinge, which all work fine - in order to solve the display problem.

  If you have any other suggestions as to what part I need, or if I have to take a completely different approach to the repair, please let me know before ordering the part of LCD screen.

  "Violence is the last refuge of the incompetent." -Issac Asimov, from its roman Foundation.

  Hello

  You are right, you can save money simply select the good parts. I think not much.

  Good luck.

• Satellite A110: I need to replace the motherboard and the CD/DVD combo drive

  I have a Satellite A1100, and my CD/DVD Combo needs to be replaced... also, I need to replace the motherboard by qualifying the connections that connect the CD/DVD drive is damaged. Is there any possible way for me to get the motherboard and the CD/DVD combo myself or should I consider a service repair center?

  And if there is a way to get the spare parts of CD/DVD and a motherboard... can someone please tell me where I can get them from? If anyone has any idea how much it's going to put me back I would appreciate, they would let me know how it is... also, I would gladly help if someone can tell me what I can do about it.

  Thank you

  Hello

  How old is your machine? If you still have your warranty, so why not give your machine to a local service partner?

  So if you don t give something on your guarantee you can trade your coins. But to look for the pieces on google and you won´t get any help from toshiba (e.g. manual disassembly or something similar).

  I tried long before your request and I made my experience that if you want to open your machine your completely on your own.

  Welcome them

• I need to replace the battery and AC adapter of the Satellite Pro U400-160

  I have a Satellite Pro U400-160.

  I need to replace the battery and the charger of my Toshiba, but I am wary about compatibility issues.

  Any battery for Satellite Pro U400 is suitable for mine?
  As I can't find which batteries are specifically suitable for my computer.

  (For example: is this a: http://www.amazon.es/Bater%C3%ADa-Toshiba-Satellite-U400-11V-7800mAh/dp/B0051A9Y88/ref=sr_1_cc_2?s=aps&ie=UTF8&qid=1366885340&sr=1-2-catcorr&keywords=satellite+pro+u400?)

  Is there a quick way to check if a battery / charger are compatible?

  Each battery and adapter you get from Toshiba has specific part number. All you have to do is use this same part number and order. You should be able to find on the internet.
  You can also get compatible parts you are ordering by the Toshiba authorized service provider in your country.

  By the way: all U400 models have the same construction and the similar specifications then all the batteries specified for U400 can be used on your U400-160.

• Portege Z830 - screen broke and I need to replace

  Hello

  I have Toshiba Portege z830. My screen broke and I need to replace it.

  Is it possible to install an IPS display instead of the original LTN133AT25-601? What IPS screen is compatible with LTN133AT25-601?

  Hello

  The original LCD that has been used in Z830 was a 13.3 TFT color LCD "(HD) 1366 x 768."
  So if you want to use any other presentation, then you should pay attention to the size of the screen and the connectors.
  I think these are the most important key elements.

• I need to replace the 2 files of system32 of VISTA (desk.cpl and spwizui.dll) but I can't find a zone DL system files of VISTA anywhere on the Internet.

  Can someone tell me the VISTA system files to download? I need to replace the BUREAU. CPL and SPWIZUI. DLL. a lot of blocking issues. I struggle to go beyond office. sfc/scannow reveals that the two files (and also the same as those in store) are corrupt. I don't have my computer with me CD. Thank you

  I suggest that copy you them to a good working computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833b

• Licensing issue? I need to replace the default motherboard with a 'Detail' education Vista Ultimate Upgrade on top of XP "OEM." Can legitimately transfer my license everywhere and how?

  I am currently a computer on which I already installed XP OEM and upgraded to the edition upgrade Vista Ultimate retailers through the ultimate steal Microsoft.

  [Reminder]

  The problem I have is that I've recently updated my graphics card to a card of Nvidia 7300GS card Nvidia GT240 on which my motherboard was properly assessed. However, due to some unfortunate circumstances (I dunno if it's associated graphics or an electrical surge problem, I suspect the latter as the card is fine) my PCI Express slot is fried! This resulted in the motherboard being unable to start any card in the PCI Express slot and gives a series of BIOS beep error codes. I even dug my old graphics (7300GS) and he was still unable to boot. Accordingly, I need to replace the motherboard for the PCI Express slot works if I use a graphics card.

  [Problem]

  Since the license Vista Retail Upgrade that I use currently is the edition of 'detail', can I simply change my motherboard everything and turn it back on, or is it more complex because it is installed on the high XP OEM that is bound to the default motherboard? What are my options?

  I have to buy another XP OEM license and reinstall everything from scratch? What happens if I didn't reinstall and just changed the motherboard and drivers updated my current installation? Is - is this legitimate?

  As I understand it, the Windows for OEM license allows a person replace a motherboard of 'default' (GA-M55plus-S3G in my case) for a replacement under certain conditions, mainly as for everything. Am I entitled to it? If so, what motherboard would be I can replace by although it is considered an upgrade? I have in mind an ASUS M4A78L-M as it is cheap and comes with connectors female jack audio 8 channels on the backplate was on my old motherboard.

  My main confusion is to know what license applies to me because of the upgrade process, retail of Vista or XP OEM? Upgrades medium I improve my driver's license?

  I would like to solve this problem without canceling my licenst but just don't know how?

  Thank you very much for any help or advice.

  Zemian.

  It is not Microsoft.

  These are public forums, hosted by Microsoft.

  You need to set the XP Reinstall 1 > and then perform the upgrade to Vista.

  We cannot tell you what motherboard you can replace it with.

  Here is the Vista Forums.

  You will have no problem using the Vista Upgrade retail > solve your XP problem 1 in the Forums of XP:

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• My motherboard is dead and I need to replace my drive system as well as

  My motherboard is dead and I need to replace it. Unfortunately, this will be a completely different map (brand and model).

  My old system drive is IDE but the MB will not accept imput without an IDE interface card.

  I have the interface card, but don't think it will work to re - install through this forum

  I have a (relatively) new SATA I don't mind that I can install the operating system (windows 7 pro) now, but here the reformatting is trapped. How can I transfer all installed programs and settings from the old system to the new system disk drive after that I re - install windows

  Cannot create a new image or anything of that nature that the system is dead.

  I have backups, but not too recent

  You will need to reinstall your programs and drivers for other devices, you cannot be transferred.

  You can recover your data by installing the hard disk in a 3.5 external USB box and copy your files. Connect it to your computer then take possession of the files in your account folder in the directory of the user on the old disk.

  Take ownership of files and folders:

  How to: Make a file/folder in Windows 7

  Amazon.com: New 3.5external HDD hard drive USB enclosure 2.0

  If it is a portable hard drive:

  DX - SATAUSB 2.0 HDD case 2.5

• Could not initialize and I need to recover the data on the hard drive.

  Original title: computer MOM will not start and I need to recover the data on the hard drive.

  It's an old computer and I do not know what version of Windows it was running.  I guess I need a bootdisk of exploitation, but where can I download that?  Or would it be easier to pull and make a secondary drive in my computer that I just replaced?  It works under Windows XP.

  Hello

  If the old system does not start could be the hard drive. Put the hard drive in another computer as a 2nd drive and then access the files. If you use a computer XP, Vista or Windows 7, you should be able to access the files, unless the drive has failed.

  You can save your files by putting the drive in another computer as a 2nd drive (better) or a USB external drive case and then save up to removable media such as CD, DVD or other USB drives. Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data. (This will not work if the hard disk is defective or other issues preventing the system from booting from the CD/DVD drive.)

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" and="" devices="" for="" it :="" bicycle="" -="" mark="" twain="" said="" it="">

• Need to replace the monitor on my Satellite M100

  I need to replace the monitor on my Satelite M100.
  Who monitors new notebooks of models can match?

  Hello

  As Akuma says you need a display that correspond to your laptop and the LCD s are not standardized.

  I think that the best option would be an authorized service provider because they can order all the original parts of Toshiba. Also return LCD is a little tricky because you must remove many screws and you should be careful with the lid.

  Moreover, here you can find the nearest ASP:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported downloads & => find an authorized service provider

• Need to replace the internal hard drive

  Hello all, I need to replace the hard drive internal for T61p, product identification 6459cto. What I ask? Thanks Ldxrunner 2015

  Ldxrunner2015 wrote:
  Hello all, I need to replace the hard drive internal for T61p, product identification 6459cto. What I ask? Thanks Ldxrunner 2015

  for the readers of plateau...

  You can use any 2.5 ", height 9.5 mm SATA drive. I got one for hitachi travelstars (now owned by western digital), which were originally ibm. others have all also good luck with (and loyalty towards) other brands. Choose your ability, the speed, the size of the cache, etc. of many online merchants have a good selection.

  for SSDS.

  same features as physical size above. you will need to do research in reliability, chip controller oddities, etc., but they get a lot more reliable. they need it another type of disaster recovery plan, however, as failure means no data is salvageable I heard. with top readers, depending on the type of failure, some recovery is generally possible without resorting to expensive professional services.

  for both types of readers, you should be able to use disks of 7 mm of height also long as you install the drive in the case of existing drive and use rubber track. This maintains alignment connector with the drive Bay.

  HTH.

• 4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  4 IPad keeps going to power off of the screen, the screen is cracked but do not know if I need to replace the screen button or power?

  Press the sleep/wake and Home buttons and hold for at least 10 seconds.

  If this is not enough, take a look at these articles Support from Apple:

  If your iPhone, iPad or iPod touch does not respond or does not turn on - Apple Support

  Use iTunes to restore the iPhone, iPad or iPod to factory settings - Apple Support.

  As a final step, try recovery mode. Turn off your unit, then plug it to your computer with the hold home button. Hold down Home button until you see the logo on the screen of your iPhone iTunes. After that on your computer, you should see the iTunes window saying that your iPhone needs to be restored to factory settings. Click Restore.

  More info here:https://support.apple.com/en-us/HT201263

  If these steps do not work, contact Apple and ask for help.

  https://www.Apple.com/support/iPhone/contact/