Satellite Pro U400 BIOS update failed - what is the BIOS Boot-block access

Similar Questions

• Satellite Pro U400 - BIOS update gone bad

  Hi all!

  I've updated the BIOS on my laptop and something was wrong, just not now a computer screen.

  I went to see the Web for Chris Bios recover.
  Have over 20 versions, but so far without success.

  My biggest problem is: I can't save on floppy disk 2 MB BIOS. All attempts to create a
  Flash or SD ended in failure.

  The laptop is: Satellite pro U400 PSU45E

  Please help me... the laptop reads the floppy in BIOS with little experience (the ones that come with Chris Bios 500Ko - 1000 KB) begins with a normal boot beep signals supposedly provided a definition blocks then baar times short beep and nothing to do...
  There must be something... BIOS BACK small size, emulator USB... BIOS to be torn down, so it is possible in charge from USB, SD...

  Every idea can be useful!

  Thank you very much

  Excuse my English

  f the subject isn't here, please redirect mderatora
  This is my 1 post here

  Hi mate

  Unfortunately if something was wrong during the update of the BIOS, then you won't be able to solve this problem without the help of a technician of the ASP

  I hope that the ROM BIOS module is not too bad
  In the worst case that the mobo is damage but maybe it s not damaged

  However. You must contact a local ASP and must ask for the manipulation of the Fryer!

  Good luck!

• Satellite Pro U400 - 15 p hangs after enabling the Realtek RTL8187B WLan card

  Hello

  I recently bought the Toshiba Satellite Pro u400 - 15 p. This notebook is originally without any operating system included. I installed Windows XP Home SP3 on it and downloaded all the drivers from the Web from Toshiba website. Everything works well except the WiFi - RTL8187B.

  Driver has been installed correctly, when I turn the WLAN on everything is always OK, but when I connect to a network wireless Windows XP hangs after some time - without notice or BSOD - and the only thing I can do is to restart the PC holding down the button for 5 seconds.

  I have:
  -installed the latest BIOS (v3.70),
  -installed the last version of drivers available (v6.1150.1112.2008)
  -tried how it works on Vista Home Basic - it does not either, but on Vista only connection must be reset.

  I searched on the web (perhaps not all), including this forum, but I was unable to find a solution.
  Now I am seriously considering warranty claim, please help me to avoid that it ;)

  Hello

  It's really strange.
  Are you sure that this happens because of the WLan card activated 100%?
  I mean there could be another reason for this gel

  I'm U400 too and I m running Win XP and Vista without problem!
  At that time, I m using WiFi and everything works ok

  I think it s not a Wlan related question, but there must be another reason why this laptop locks maybe a problem of RAM or something like that.

• Satellite Pro U400-18 s - how to switch the display to TV?

  I recently had a Satellite Pro U400-18 s and I am trying to connect it to my TV. The laptop has only a VGA port and my TV has RCA, S-Video, HDMI and SCART taken. I bought a vga s-video cable, but I am unable to get a picture on the TV.

  This is because the laptop only shows the lowest resolution of 800 x 600?
  Is there a way to lower the resolution of some how that I didn't think?
  I checked and I am running the latest drivers for the graphics card intel?

  Hello

  When you want to connect your laptop to the TV, do the follow-up:
  Connect the cable
  Activate the port S-video on the TV (TV feature how to do)
  FN + F5 key combination to switch to a laptop LCD and TV

  Please let me know if everything is OK or you still have the same problem.

• Satellite Pro M30: new HARD drive - what is the max capacity?

  Hello

  My Toshiba Satellite Pro M30 is 4 years old with a 60 GB hard drive (IDE).
  I would like to replace the hard drive with a bigger. What is the best? (BIOS version 1.70, Windows XP Pro SP 3).

  I would be happy not only to get the answer to my question but alos to where I might find the answer myself.

  Thanks and greetings
  waltgallus

  Hello

  As far as I know the laptop is equipped with an ATA-100 IDE / ATA-6 HARD drive controller.
  In this case, you will need to use the 2.5 IDE HARD drive.

  I know with certainty that this notebook would support 80 GB HDD, but generally a larger HARD drive should also be possible because the controller is able to manage the 48-bit LBA.
  The 48-bit LBA can handle hard drives of more than 120GB.

  In my opinion, you can try a 120 GB and also 160 GB HARD drive should be possible.

• Satellite Pro A40 psa45e - error code: what is the problem of flashing

  I just bought the laptop above Satellite Pro A40 (psa45e - 0184 h - en), which came with a generic power.
  The great laptop worked until the other night.

  The light on the power supply is on, output is 15 Volt, turns on the laptop at the front, an orange light comes on and blinks 5 then 2 then 1, I guess the 521 error code.

  Unplug everything and the light goes out then two green lights turns on, then laptop has started twice and started upward (running xp) but then freezes.

  I guess the power supply stopped working and the chip has noticed the problem.

  Can anyone confirm the fault error is feeding or is there something else wrong.

  Need to know before you buy the Toshiba power, I don't want to lose more money.

  Help, please...

  How much is your generic AC adapter?

  The amps must be the same or greater than what your laptop needs. You can view the Volts + Amp requirements based on the laptop (serial sticker).

  So if the laptop needs 15v 8A... you need a 15v 8A or 9A 15v or AC adapter / higher CC.

  If the amps are too weak, in the custom of mobile devices get enough power and could cause damage.

  You should get yourself a good Toshiba adapter for peace of mind. Cheap generics can be more trouble than they are worth.

• Satellite Pro C50: Installation of Win 7 using the UEFI boot mode

  I want to install Windows 7 Pro 64 bit on Sat Pro C50 (downgrade if you like - comes with 8 win), but I want UEFI boot, with GPT partitioning.
  I'm happy wipe existing partitions if that solved the problem.

  I have disabled _have_ Secure Boot.
  Win 8 install DVD boot works;
  CSM boot and boot from Win 7 DVD works - but this is not what I want.
  Definition of return to the UEFI boot and install Win7 boot media - hangs on "Starting Windows" screen
  Media _is_ good, works well on the PC manufacturers.

  I'm not convinced that it is a problem of Microsoft.

  Hello

  On Toshiba laptops, where the UEFI BIOS is available, it of necessary to disable secure boot and change the boot to the CSM mode in order to boot from external sources and install systems other than Win 8 or 8.1 Win

  Of the workarounds in the internet described the installation of Windows 7 in UEFI mode but I doubt that this will be possible on Toshiba laptops because the BIOS is different and modified for each series of laptop.

• Satellite Pro U400-11V - charges only battery when the computer is turned off

  Following a reformatting my hard drive of the computer, my laptop recognizes only the AC/DC power adapter when it is turned off. When the computer is turned on, it does not recognize the AC adapter.

  Changed the power supply ac and it made no difference.

  Have also tried an update of the BIOS (3.0), I am running Windows Vista 32 bit.

  Hello

  I doubt it has something to do with the software or the operating system. In my opinion, that this looks like a hardware problem, because the battery will be always charged if AC/DC adapter is plugged in. That's why it of not necessary to enable this setting in the configuration of the software.

  If your BIOS is already updated, contact an authorized service provider. Technicians can check your laptop and maybe the motherboard needs to be replaced.

• Satellite Pro A15 - Recovery CD fails to resolve the failure of windows startup

  Windows crashed on this computer, and now, it fails to boot from the hard disk. The machine gets as much as allowing the choice of which drive to boot, but the recovery CD is unable to solve the problem, as it hangs on during an attempt to review/set partitions. I can get the recovery CD to launch and get used to MS - back. Then I can look at the files in a:, b: (connecting a USB floppy), c:, d:, and x: (recovery cd).

  Any ideas on the restoration of the situation apparently not too seriously?

  Hey Buddy,

  It of strange that recovery disk doesn t work because it contains a pre-tested picture to factory settings and normally it should always work.
  If not the recovery disk is defective (striped) or it s a hardware malfunction

  I think the best way to resolve this issue using an original disc of Microsoft. With this disc, you can also reinstall Windows.

• Satellite Pro U400 - audio quality is not good

  OK this problem has been plaging me for years. I have a Toshiba Satellite Pro U400 windows 8.1.

  The sound quality is terrible.
  I can remember it's bad in windows 7.

  Contextant driver is bad, and so is the generic driver windows 8.1.

  Help, please

  To be honest, I have no idea what you mean exactly by the quality is terrible.
  I've owned a notebook Satellite U400 happened and I have to say that the sound quality was quite good.

  Satellite U400 is a small portable 13.3 and the speakers have been adjusted to the dimensions of the laptop.
  The Conexant audio chip is part of the motherboard and you will not be able to replace it.

  If you want to use another sound card, you can try to use an external USB audio interface.
  I use this external sound solution for my home recording studio.

  The audio interface is connected to the USB port of the laptop s and the external speakers are initiated for the external audio interface.

  By the way: isn't Satellite U400 is the list of the supported 8.1 notebooks... Win so you won't find not all drivers Win 8.1 for this unit on the Toshiba driver website.

• Satellite Pro U400-G13 - "C++ Runtime Error" at startup

  Hey the Toshiba Forum users

  I just bought a Satellite Pro U400-G13
  I turned on and the auto install startet Windows Vista. The inexplicable to the computer.
  After the reboot, a toshiba program starts and requested a restart more.
  After that, I have a "C ++ Runtime Libery Error ' whenever I start the computer.
  If I press OK, the screen goes black in 1 second and the error shows up again.
  It gets to a screen "Please wait" screen to sign in to Windows.

  I can start it in Mode safe, but do not really know what to do with this...

  Y at - it someone who has tried something similar or has good ideas for what I can do...

  Many greetings Asger Benzon

  As Akuma said, have you installed extra RAM? Remove the extra RAM and try without it.

  In your position I would like to reinstall the OS (Operating System). Backup your data first, because everything on the HARD drive will be erased.
  After this, start Notepad, and then press F8 or boot from the recovery disc. Then you can fix the computer. Windows will be reinstalled.

• Satellite Pro U400 - 12 p: Vista 64 bit audio driver has no - no microphone

  I have the Satellite Pro U400 - 12 p.
  I installed the Vista 64 bit, because I upgraded the ram to 4 GB.
  Now, Conexant driver does not work.
  Just as it should, even tried downloaded the 32-bit Version.
  None.

  It shows that it can be upgraded, then 'install' file, and at the end, it shows "Failure."
  The cause of it, it shows that I have no audio output installed. = speakrs do not work and the MIC of course.

  Only when I remove the driver in Device Manager and restart the machine, it becomes thin.

  So, what's the problem?
  * The problem is the Microphone does not work! How can I make it work? *

  Please, help me, I am a student, and it takes a lot for studies.

  Thank you much for the help.
  NIR.
  .

  Hello

  It is not easy to say why this is happening.

  Maybe the facilities is order wrong. I send you the facilities for U400 command.
  Try please install all the drivers, tools and utilities following this order of installations.

  Windows Vista SP1
  KB941833
  KB941833
  Module of Chipset Intel (r)
  Intel (r), Robson (iMSM Driver of Intel)
  Intel Crestline-GM / UMA Drive
  or
  AMD M82XT /M86 driver
  Audio driver Conexant CX20561
  Driver LAN Marvell 8040/8055
  Synaptics Touch Pad Driver
  Alps Touch Pad Driver
  Conexant Modem driver
  Modem region Select utility
  Driver Intel LAN wireless Golan/Kedron
  Intel Proset utility
  Atheros Wireless LAN driver
  Realtek RTL8187B Wireless LAN Driver
  Chicony camera software
  Bluetooth Stack for Windows by Toshiba
  CIR Port driver
  TOSHIBA Value Added Package
  TOSHIBA hardware configuration utility
  TOSHIBA supervisor password
  TOSHIBA SD Memory utilities
  AuthenTec AES1610 fingerprint utility
  TOSHIBA ConfigFree
  TOSHIBA WPS library
  TOSHIBA Assist
  TOSHIBA Speech System
  TOSHIBA Extended Tiles for Windows Mobility Center
  TOSHIBA Remote Control Manager
  CD/DVD Drive Acoustic Silencer
  Toshiba HDD Protection
  TOSHIBA face recognition
  TOSHIBA TRS driver
  HDMI Control Manager

  Please post the result.

• Satellite Pro U400-11V - Installation using the floppy from XP downgrade

  Hello

  Yesterday I had to replace my HARD drive once it is simply dead.
  I didn't know it was a big deal that I had lost any data.
  I would just like to re - install Windows XP using the Downgrade XP disk came with the laptop.

  It turns out that: I have about 10 discs Downgrade XP each almost identical looking and everyone, I assume, associated with a particular Toshiba laptop my company bought at some point.
  Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V.

  What I did:
  -We selected at random.
  -Installed Win Xp Pro.
  -Tried to activate Windows.
  -It indicates that the product key is bad (and some drivers are missing, so it is obviously not the disc that came with the laptop, but he got me so far).
  -Correct the product key according to the key that is located on a sticker at the bottom on the laptop *.
  * On the sticker, this key is an OEMAct Windows Vista Business key, the OS of the laptop came with.
  -L'activation of Windows will not accept the key to the sticker.

  So I have 2 questions:
  1. is there another method of re - install Windows XP Pro using the * original * Downgrade XP disk that came with?
  2 (leading to #1) is it possible to identify which drive is the one shipped with my laptop? Perhaps by checking some serial numbers on the disc?

  Worst case scenario I'll have to make (at most) 10 Windows installs until one works.
  But I was really hoping some help & advice.

  I can't wait to hear all the answers,
  Thank you!

  Hello

  > I have about 10 discs Downgrade XP each almost identical search and each, I presume, associated with a particular Toshiba laptop my company bought at some point.
  > Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V
  Your ad is really funny :D

  I put t know how your Win XP drive looks like. My laptop came with the recovery disk and it was mentioned on the label that it's Toshiba recovery disc.

  In addition he s already enabled so I put t need to activate the operating system by using this key.
  Also, the key at the bottom of the unit belongs to the preinstalled operating system and it will NOT work with the new Win XP or another operating system.

  But back to your Win XP disks
  I recommend that you check the single disc... maybe a disc is already activated

• Question on the infrared driver for Satellite Pro U400 - 12 p

  I downloaded the infrared driver for Satellite Pro U400 - 12 p
  When I run the Setup, I get an error that says "the installation of the windows package file is not complete" or something like that.

  Anyway, he said that the Setup file is in ruins. Tried downloading it several times.

  Hope I have posted this question in the right forum.
  Thanks for help.

  When you download the driver to extract it to a folder created on your desktop. From there start the setup.exe file. It should work.
  Have you done the same?

• How I download 80070103 windows update is update safe what is the problem with this update

  Just got the update installation today to download update 80070103 time ever I go to download the update fail what is the problem with this update & how do I get updated.

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with Windows Update.

  Please answer these questions:

  1. What is the update's KB number?

  2 have you made any changes to the computer before the show?

  Let us try the following methods:

   

  Method 1: Run the following fix - it:

   

  The problem with Microsoft Windows Update is not working:

  http://support.Microsoft.com/mats/windows_update/

  Method 2: See the following article:

  Windows Update 80070103 error code:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80070103

  Hope the helps of information. We know if you need help. We will be happy to help you.