problem with effect of deformation of time in first

Similar Questions

• Anyone having problems with effects after that put 5.0.3 update?

  Since the 5.0.3 update a few weeks ago, I had problems with adding an effect to a clip. It seems not to matter type (both are res HD, either a shot on a Canon 5 d Mark II or a .m2t file .mov from a camera of HD Sony HVR - Z5U with a registration unit of memory). I have been using the file types of the same cameras with CS5 since August without any rendering problem, by adding effects, playback, slow response time, etc. Now, it seems doubtful that PrPro can handle adding an effect to a clip.

  Before it would show changes to the effect on the video in real time, but now it takes several minutes for the small front wheel I can access PrPro again. By example, if I add a fast color corrector or levels and try to change only one attribute, it unfolds, crashes, and then finally updates. He plants not (unless I force quit), it just hangs. I tried with just Finder and open PrPRo, and it still occurs. Previously, I could launch Photoshop, Firefox, Chrome, Mail, Finder, * AND * Pro

  Nothing else is it slow (playing back non-rendus, while that rendered or book review), although any reading can be slow sometimes with effect. In addition, there doesn't seem to be picky to a certain video effect. I've done everything I can think of, returning Short or reinstall: log in as root, Pref delete, drives hard various small clips. Initially, working on a FW800 external drive, I have recently worked on internally to test clips, but apparently not to the disc material.

  The fact that everything worked fine before, I can't that assume it was the update. I have the same software on a similar but lesser model home with no problem, but the 5.0.3 update failed with the auto-update and I have not tried to install it manually, is still on 5.0.2.

  Anyone else having this trouble and short of reinstalling, you found a solution? Thank you.

  iMac 27 "(21" model of Home Basic) "

  Mac OS X

  10.6.5

  2.8 GHz Intel Core i7 (4 cores)

  8 GB RAM

  ATI Radeon HD 4850 512 MB

  Master Collection CS5

  > Is there documentation available online on how to revert to the previous version?

  Uninstall Premiere Pro. Then, reinstall without updates.

• Why are you up-to-date Firefox so fast? I have problems with my Internet Bank each time until they have updated their software. And at this point, you already have a new version.

  I have a popup that says there is a new version and I don't know how to get rid of it.
  As I said in the question I encounter problems when you update too many times in one year.
  I didn't know where to ask this question. There may be a better place, but I could not find.

  @uinsin42, there is no Firefox 8.0. 2 and 3.6.28 versions of Mozilla as the most recent for each is 8.0. 1 and 3.6.24

• Problem with sound in the ProRes files on first last, CC on 10 to win

  Hello, I've updated my CC Pro first to the latest version on my Windows 10 PC. Since then, I have a problem with the sound in ProRes files recorded with recorder Odyssey 7 q. My first reads the file and it detects sound only partially (in each file it our times of 2-3 seconds of silence, followed by its normal).

  It happens only on my first on Windows. On my MacBook with the same version of first, everything works fine. Apart from the first, I play Prores files successfully on my windows (with sound).

  You know all the solutions to this problem? I tried to reinstall codec first and Quicktime on my PC. Thanks in advance for the help.

  Convergent Design and Adobe are aware of the problem and working on a fix.  You need to roll back to 2015.3 for the moment.

• How to solve the problem with slow import mxf files exported from first cc?

  Hello!

  I'm working on the first update to 7.2, on 64 bit, windows 7, and I have a problem with the import of the MXF op1a (IMX 30 PAL) files that I exported from first.

  MXF Import blocks especially first, but when he's not, it takes a long time to import (10-15 min).

  I tried editing ContributeQ but again, it hangs / takes a long time and I can see only a black screen.

  I installed a new copy of windows on this computer with everything clean, but it doesn't seem to work.

  Is there a software patch or way to go around for this problem?

  Whenever you have trouble with this, reduce the number of influences of others on your system.  In this case, delete TotalCode and see if it behaves better.  If it does not remove the device from BlackMagic and uninstall the drivers.  If one of these steps will improve performance, check with the third-party manufacturers.  There may be a setting or an update is necessary so that your system works correctly.

• Problem with masks at sending back of Speedgrade first (CC)

  Hello

  I'm color ranking a clip in SpeedGrade CC using the new direct link function. For calibration of the colors I used masks and also the different layers. Once I'm done, I sent my sequence back to first Pro CC.

  I see, first shows me exactly the color correction, I did in SpeedGrade, except for one thing:
  The places where I used the masks in SpeedGrade to illuminate their for example a little until now are filled with lines pixeled...
  I thought it's just a problem with the preview, so I exported it. Slept pixeled lines.

  Once again: in SpeedGrade is all fine, but when I send the return sequence to the first there are those pixels.

  It's really irritating because one day before it worked fine with no problems and I was virtually the same as now.

  Please help me if you can! Thank you!

  I even posted in the Premiere Pro forum and got a good answer:
  http://forums.Adobe.com/message/5858747#5858747

• I have problems with creative cloud.  5 times now, I was in the chat with Adobe and they say the problem is solved and so far it has either not been corrected or there 1 night and then I get this message again

  So to continue with my problem.  I could not open CC, or if I sound only for 1 day, then I get this problem again...

  Adobe Creative Cloud is necessary to solve this problem. However, it is missing or damaged.  Please download and install a new copy of the creative from cloud

  ' http://www.Adobe.com/go/adobecreativecloudapp '.

  I was in the chat with Adobe 5 times now for hours in a row and had to re download my times apps and use my data allowance and I'm sick of it! After every time Adobe says: the problem is corrected and I will have no more problems, and that's not true.  The last time I was in the chat was last night and it reassures me, the problem has been solved once more and it worked today and tonight it's the same thing.  I am a student online and am so far behind that I have not been able to use my apps, Illustrator and Indesign as CC keeps having this problem.  I am very frustrated and I don't know what to do. If I go again being discussed, I know they will do the same thing and I am not convinced that they will never fix this problem.  They assure me this is not my computor but it is a corrupt file or something on it.  I pay a monthly subscription for the products that I can't even use

  Please, try the following steps:

  • Uninstall Adobe CC (Creative Cloud help |) Uninstall the creative Office Cloud app)
  • Reboot the computer.
  • Install the latest Adobe Creative cloud version from the link: CC help | Creative cloud desktop

• Problem with the configuration of the time in the Protection of VMware 5.5.6 and timezone data

  1 Al VDP connect the following appears:

  "The last request was rejected by the POS device."

  refers to the NTP settings.

  There is a difference of 17 minutes.

  2. While the NTP definition for my region cannot add Chile ntp.shoa.cl

  3. I can't change the date and time manually with hwclock

  4. when change Yask time with me, the following message appears:

  "Cannot update the dynamic configuration strategy."

  Please need help with this problem.

  Solution:

  1. check the time zone and NTP ESX resident POS configuration.

  2 (virtual appliance VDP) # vmware-tools service restart

• Problem with the registration date and time: only one date is recorded

  Hello community,

  I have the following problem:

  I automatically stores the datetime values in a date column "changed_on", whenever a user saves a form.

  Unfortunately, when I show this value in a form or report, only the correct date is shown. Still, the time is 00:00. There is no time in the database value, too.

  

  Whenever a user clicks the save button in my form, the value of "changed_on" is generated by a calculation that returns "sysdate" (see image below).

  I think I tried everything now, but I can't understand how to record the date and time correctly. I already tried the format for the changed_on field mask to my preferred format, but it does nothing (jj. MM YYYY HH24).

  How can I automatically record the date and time?

  You need two things.

  1. put the mask of the P3_CHANGED_ON element to JJ. MM YYYY HH24

  2. change your source of calculation to

  TO_CHAR (sysdate, ' DD.) MM YYYY HH24 ')

  In this way, what holds the element and implicit conversion happens when recording records will match.

  Thank you

  -Jorge

• Problem with effects in Captivate 9

  I have two questions.  First of all I can't sync Properties menu option.  It is absent from my menu of the window.  Where are the other options in the menu.  This makes me think there is another menu, I need access to.  I can't understand.

  Second, I want to adjust the effects when I have multiple effects.  In all the presentations I discover - users to drag an effect on the time to adjust when it starts and stops.  I can't see these options.

  They must be allowed, normally they are enabled by default using the window effects, so you must have disabled their? I regret that this option is not available in the Timing Panel, which should be renamed "range of effects.

  Looking more closely at your screenshot, it is activated, but you forgot to use the expand icon to the left of the object, it is a picture in our case. This screenshot it is extended, in yours, it is reduced:

  

• Problem with run invoke vmscript several times on the same VM

  The following is a test command I am running

  $PCCreds = Get-Credential
  $VM = Get-VM -Name "Test-VM"
  while ($VM -ne $null) 
       {
       $VM | Invoke-VMScript -GuestCredential $PCCreds -ScriptType Bat -ScriptText 'whoami' 
       Start-Sleep -Seconds 10
       }
  

  While in this infinite loop, I receive a mixture of success and failures

  ScriptOutput
  ----------------------------------------------------------------------------------------------------------------------
  Test-VM\user
  |  
  ----------------------------------------------------------------------------------------------------------------------
  Invoke-VMScript : 7/9/2012 11:22:12 AM    Invoke-VMScript        While performing operation 'Connect to host service '
  https://vcenter.local/sdk' at port 902' the following error occured: 'Unknown error'    
  At line:15 char:45
  + while ($VM -ne $null) {$VM | Invoke-VMScript <<<<  -GuestCredential $PCCreds -ScriptType Bat -ScriptText 'whoami'
  Start-Sleep -Seconds 60}
      + CategoryInfo          : OperationStopped: (:) [Invoke-VMScript], VimException
      + FullyQualifiedErrorId : Client20_VmGuestServiceImpl_VixWaitForJob_VixError,VMware.VimAutomation.ViCore.Cmdlets. 
     Commands.InvokeVmScript
   
  ScriptOutput
  ----------------------------------------------------------------------------------------------------------------------
  Test-VM\user
  |  
  ----------------------------------------------------------------------------------------------------------------------
  

  With an array of objects of virtual machine using this same code seems to work without problems. These virtual machines are distributed over several hosts.

  My guess is that this has something to do with sequential to the same host, reaching a connection limit max, as well as the connection is not completed after a successful execution of the cmdlet. Has anyone seen this problem before?

  Against what version of vSphere are you running that?

  And are you using PowerCLI 5.0.1?

• Problems with lines due double date/time in the query

  Hello
  
  I'm trying to draw a list of the counties of the test sample. I want only 1 rank by the test result so that I can build a report in Cognos showing the rate of an outcome determined as a percentage of the total causes a range of dates.
  
  My problem is that I get duplicate for the same result rows: in the example below, I have 2 to 5 lines for each result instead of only 1 for each result. I have this reduced up to caused by the date - the date is the same, but the times are different, if several lines are drawn. I tried to use tronque(), among other things, but although the output now shows the same date without the time part, duplicate rows are always drawn.
  
  Any help would be appreciated!
  
  This is the code for the query:
  

  SELECT DISTINCT
      io.lab_id AS "LAB ID",
      l.name AS "LAB NAME",
      mtr.marketingtest_id AS "TEST ID",
      mtl.name AS "TEST NAME",
      mtr.marketingresult AS "MARKETING RESULT",
      COUNT(DISTINCT mtr.sample_id) AS "NO OF SAMPLES",
      TRUNC(os.statusdate) AS "STATUS DATE",
      os.orderstatuscodes_id AS "ORDER STATUS",
      io.redoorderid AS "REDOORDERID",
      mtl.locale_id AS "LOCALE"
  FROM igen_sample s
  INNER JOIN igen_igenityorder io ON s.igenityorder_id = io.igenityorder_id
  INNER JOIN igen_orderstatus os ON io.igenityorder_id = os.igenityorder_id
  INNER JOIN igen_marketingtestresult mtr ON s.sample_id = mtr.sample_id
  INNER JOIN igen_lab l ON io.lab_id = l.lab_id
  INNER JOIN igen_marketingtestlocale mtl ON mtr.marketingtest_id = mtl.marketingtest_id
  
  WHERE mtl.locale_id = 1
  AND os.orderstatuscodes_id IN (8, 9)
  AND mtr.marketingtest_id = 84
  AND os.statusdate BETWEEN '24-OCT-2011' AND '31-OCT-2011'
  
  GROUP BY mtr.marketingtest_id, mtl.name, mtr.marketingresult, os.statusdate, os.orderstatuscodes_id, io.lab_id, l.name, io.redoorderid, mtl.locale_id
  ORDER BY mtl.name

  Hello

  893078 wrote:
  Hello

  I'm trying to draw a list of the counties of the test sample. I want only 1 rank by the test result so that I can build a report in Cognos showing the rate of an outcome determined as a percentage of the total causes a range of dates.

  My problem is that I get duplicate for the same result rows: in the example below, I have 2 to 5 lines for each result instead of only 1 for each result. I have this reduced up to caused by the date - the date is the same, but the times are different, if several lines are drawn. I tried to use tronque() among others...

  TRUNC looks like what you want. If you want a single line per calendar day, or need to GROUP BY TRUNC (os.statusdate).

  AND        os.statusdate  >= TO_DATE ( '24-OCT-2011'
                              , 'DD-MON-YYYY'
                          )
  AND       os.statusdate  <  TO_DATE ( '31-OCT-2011'
                               , 'DD-MON-YYYY'
                          ) + 1
  GROUP BY  mtr.marketingtest_id
  ,            mtl.name
  ,        mtr.marketingresult
  ,        TRUNC (os.statusdate)               --     <==  CHANGED
  ,        os.orderstatuscodes_id
  ,        io.lab_id
  ,        l.name
  ,        io.redoorderid
  ,        mtl.locale_id
  ORDER BY  mtl.name
  

  If os.statusdate is a DATE, don't try to compare it to a VARCHAR2, as 24 October 2011 "." Compare DATEs to other DATEs.

  Furthermore, GROUP BY product automatically separate results. If all GROUP expressions in the SELECT clause, there is not need to say SELECT DISTINCT .

  Published by: Frank Kulash, November 23, 2011 09:34

• problem with the format of the time and from 12:00 am

  I'm using Acrobat 9 Pro. I have a pdf document to fill out on-line that I fell through the wizard and then modify by using "Add or edit fields" under the menu "Forms." I have a text field where the time is recorded (hours, minutes and am or pm). I have it in the format hh: mm tt, but if I come back at midnight, it goes to 0:00 when I tab out of the field. I am not allowed to use military time. Any other time I entered does not cause it. Anyone know how I can fix this so that it remains 12: 00?

  I understand, it seems strange, but it's like that. I'll guide you through what you need to do.

  1. create a new JavaScript to the document level. With the document open, select: Advanced > Document Processing > Document JavaScripts

  and add a new one. You can call it what you want, for example "DateFormat." When you add a new, it provides you with a skeleton of the default function. Delete and copy and paste the following text:

  function TF2 (ptf) {}
  If (! event.value) {}
  return;
  }
  var date = AFParseTime (event.value, null);
  If (! date) {}
  Event.Value = "";
  return;
  }
  var cFormats = new Array ("HH: mm", "HH: mm tt", "HH", "SS tt");
  var time_string = util.printd (cFormats [MFP], date);
  var zerohour_re = / ^ 0: /;

  Event.Value = time_string.replace (zerohour_re, ' 12: "" ");
  }

  function TK2() {}

  AFTime_Keystroke ("h: mm tt");

  }

  2. then you need to change the date field and specify a custom type and Format script. On the Format tab, select a category of "Custom" and you will see where you can write the script.

  For the strike script, follow these steps:

  Typing script

  TK2();

  To Format the script, follow these steps:

  Script format

  TF2 (1);

  These what call the functions that you configured in the script at the level of the document that you created earlier. Post again if you have any questions.

  TF2 altered function simply replaces the characters "0:" with "12:" if at the beginning of the string in the form.

• I have a problem with the security warning every time when I turn on my HP netbook

  

  What should I do to not appear the next time this window? I always Cancel but it appers again and again when I turn on my HP netbook.

  Hello

  Hello. I can see the picture now. Please check this first  

  It is much safer to download from Microsoft source rather than unknown. You can also repair Windows using the installation CD/DVD.

  Kind regards.

• Problems with effects of roll on my toolbar - cannot select "motion".

  I am wanting to add an effect to scroll on my toolbar so that it adheres to the upper part of the screen rather than disappear when you scroll in front of her. I know how to do this, but when I click on the toolbar the 'motion' checkbox is grayed out so I can't select it.

  Is there a way to turn it?

  Thank you

  It's OK, I shut down & restarted and it worked. Sorry I didn't try this before you post!