Problem with sound in the ProRes files on first last, CC on 10 to win

Similar Questions

• Problem with writing in the new file every day, error #1

  Hi, I have build a vi that writes data measured for each second of the file. This vi will be used for the acquisition of long-term data and I want to write the data to a separate file every day, else the file becomes

  very large. The vi is supposed to work like this, first set the folder to save it and then start logging with the "datalogon" button, first write the column names in the file and after that write data

  every second. If the date is the same newspaper, data, if the date is not the same write the new file name, write the column headers and write the data again every second. The date is used as the file name.

  This work is quite good only at the beginning of the vi I get the message "error 1 occurred open/create/replace the file writable spreadsheet String.vi-> write to the spreadsheet (string) .vi-> NHR file -

  SerialDaq - 03 APR 2013 .vi. I did some tests and it seems that in the first or the second round of the loop, the path in the annex is ' file name:------"and not drive:- and this seems to be caused by the fact

  that I first write the column headers, and then the data (if I write only the data of the problem does not occur).

  So I (think) for what is now the problems but don't don't know how solve it, I would appreciate it if someone could help me with this.

  Regards, Martin

  I made the change you mentioned and to my surprise I got the error message and also, with the vi you sent, I took look at it and found that:

  -If I first enter the "folder to save the file', then run the vi and then press on the" data connect "I don't get the error.

  -If I first run the vi, then enter the folder ' save file to "and the hit" the data log on ' I get the error.

  I also tried with the vi original (without the connection shiftregister in the case of false and init for removal) and which gives the same result as above. If I get the

  error message and choose stop the vi, start the vi again once I don't get the error because the folder in which the file is entered. This issue appears only when there is no file «»

  to save the file "in the dialog box.

  While I'm writing this I realize that "folder to save the file" is outside the while loop so only executed at the start of the vi is maybe I have to put it inside the while loop? A tried

  This and at first, it seems that the problem is solved, I don't get the error message on my screen, but it still appears on the error handler in another part of the vi (visa series).

  Oh, Yes. The 'name of the resource visa' and 'file to save the file' are both outside a while loop and are only read at the start of the vi, at the moment they have not a valid

  the error value is generated.

  Problem solved, thank you for your comments!

  Regards, Martin

• Problem with 'Write to the worksheet File.vi' in Labview 8.2

  Hello

  I wrote a vi to reduce the noise of my source of signal (voltage). When I wrote in the spreadsheet file, it saved only 10 rows of data. How can I continue to record the signal until I stop the vi.

  Thanks in advance,

  Michael

  How many samples you take with the DAQ Assistant? Is it ten?

  Please pay attention to the answers. You never want to save more than one iteration until correct you the entry in the spreadsheet file.

  Post your VI if you still have questions after the fixing of the VI.

• Problems with sound on the computer of Windows 8.

  my sound completely drops whenever I use my Dell inspiron 15R. IM tired of having to restart my pc every 20 minutes for the sound. IV tried all the stuff I can to fix the problem, but I get the same messages driver works properly and is up to date. the camera is used by another application but I haven't opened that it would use. Just WordPad which doesent use any sound I get no sound at all no sound sound of windows net or my hard drive. need this problem as soon as POSSIBLE

  The tab of the Windows driver will often say that the driver is updated, when in fact, the manufacturer has a newer version that Windows can detect.

  Instead of using the driver tab, I go to the website of Dell directly and manually download the new driver for Dell.

• Problems with export/save the text file in Indesign

  Hi scripters,.

  I have a problem that I don't know how to solve.

  InDesign CS3, Mac and PC - seen as the problem on some Macs, not all, but some still have / get this error.

  I made a script that collects the text of some managers of related texts:

  for (var i = 0; i < myMainList.length; i ++) {}

  var curTF = myMainList [i];

  while (curTF! = null) {}

  myExportString += curTF.contents;

  curTF = curTF.nextTextFrame;

  }

  myExportString += "\n\n###\n\n";

  }

  alert (myExportString);

  It collects the text and also it will display ok in the dialog box.

  However on some computers (Mac) the following will only produce a byte zero of the file (when there are several textframe in the above loop, a zero-byte file is still produced - but again, it is only on some Mac) If a single textFrame with only a small portion of the text is saved/exported it works:

  var Folder.myDocuments.path = myFolder + "/ Desktop/export";

  //alert ("Myfolder:"+ MyFolder ");

  {if(!myFolder.exists)}

  Folder (myFolder) .create ();

  }

  var myFileName = myFolder + "/" + win. FilePnl.FileGrp.FileName.text + ".txt";

  var myFile = new file (myFileName);

  myFile.encoding = 'text ';

  myFile.open ('w');

  myFile.write (myExportText.replace("/\u2011/g",'-')); Replace (/ [^ a-zA-Z 0-9] + / g, "));

  myFile.close ();

  It has to do with using .silence?

  I hope someone can help me with this summer working on this problem for means of time now.

  Thomas

  Somehow myExportString became myExportText.

  In addition, what happens if you replace the text before write you it

  to deposit?

  Another thing you could try is to cast it to a string as follows:

  String (myExportText)

  Also, maybe try to change the encoding "UTF-8".

  Substances

• Problem with 'systimestamp' and the CSV file

  Hello
  
  I'm trying to insert data from a CSV file. One of the columns in my table must feed with oracle system date and this column's timestamp format.
  So here's my control file syntax:
  
  DOWNLOAD THE DATA
  INFILE '__FICHIER_PLAT__ '.
  ADD THE CUSTOMERS TABLE
  FIELDS TERMINATED BY '; '.
  (
  DATE_CREATION "systimestamp"
  FILLING filler1,
  CODE_CLIENT ' TRIM (: CODE_CLIENT).
  TYPE_CLIENT ' TRIM (: TYPE_CLIENT).
  filler2 FILLER,
  START_DATE ' TO_DATE (: START_DATE, 'YYYYMMDD'). "
  DATE_RESILIATIO ' TO_DATE (: DATE_RESILIATIO, 'YYYYMMDD'). "
  Filler3 FILLING,
  Filler4 FILLING,
  Filler5 FILLING,
  [...]
  Filler78 FILLING,
  Filler79 FILLING,
  Filler80 FILLING,
  Filler81 FILLING
  )
  
  I get this error:
  Sheet 1: Rejected - error on the CUSTOMERS table, column FILLER81.
  Column not found before the end of the logical record (use TRAILING NULLCOLS)
  
  It seems SQL * Loader see DATE_CREATION 'systimestamp' as a field of my CSV file.
  
  You know a syntax to define a column with systimestamp?
  
  Thank you!

  Alexis

  SYSTIMESTAMP does not seem to be supported (even in 11g) this way. If you read the [using SQL * Loader to generate input data | http://download.oracle.com/docs/cd/B28359_01/server.111/b28319/ldr_field_list.htm#i1008234] you'll see that only CONSTANT, expression, RECNUM, SYSDATE and SEQUENCE are supported - that is to say SYSDATE is a special case.

  However, "SYSTIMESTAMP" is a perfectly good PHRASE. My example load historical prices from Yahoo finance.

  Data:

  ORCL,03/09/2008,21.52,21.57,21.01,21.19,40638100,21.19ORCL,02/09/2008,22.3,22.37,21.5,21.55,43622600,21.55ORCL,29/08/2008,22.4,22.43,21.7,21.93,35278100,21.93ORCL,28/08/2008,22.29,22.73,22.27,22.64,18700300,22.64ORCL,27/08/2008,22.2,22.57,22.13,22.34,21338300,22.34ORCL,26/08/2008,22.16,22.38,22.01,22.15,16293500,22.15ORCL,25/08/2008,22.54,22.71,22.19,22.21,20109200,22.21ORCL,22/08/2008,22.52,22.82,22.39,22.7,18335300,22.7
  

  load data
  into table price_history append
  fields TERMINATED BY ',' OPTIONALLY ENCLOSED BY '"'
  ( ticker char
  , trade_date date "dd/mm/yyyy"
  , open_price
  , high_price
  , low_price
  , close_price
  , volume integer
  , adj_close
  , update_ts expression "systimestamp"
  )
  

  and data load very well.

  Compared with the DEFAULT value in the column definition:
  -Use the value DEFAULT if that's what you always (or almost always - you can always ignore it)
  -use * expression 'systimestamp' * in the SQL * Loader if control file varies according to the type of load. Or if you are not allowed to modify the table definition (for example, if it is the table of the provider).

  HTH

  Nigel cordially

  Edited by: nthomas on January 8, 2009 15:31 (minor typo)

• a problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory

  When looking at the module a LabVIEW VI called for TestStand, I get the following message:

  A problem with one of the files in the TestStand\AdapterSupport\LabVIEW directory.  Please reinstall or repair.

  I made the mistake of cleaning C: in my computer.  Clean the C:\National Instruments downloads

  Why would someone put bits of applications or modules, etc. in such a directory?

  I'm not too crazy about restoring 11FR in this folder.  It's just crazy!

  If anyone has encountered this before?  No "easy"? outside re - install TS...

  Side note: I do not touch anything in the \Program files. National Instruments\TestStand\AdapterSupport\LabVIEW

  What version of LabVIEW and TestStand do you use?

  In 2012, TestStand, this directory is mapped to:

  C:\Documents and Settings\All Users\Documents\National Instruments\TestStand 2012\AdapterSupport\LabVIEW

  Have you tried mass compiling the screws in this folder?

  I had to create a new 'TestStand - default values XX.llb"file, where XX is the last version of LabVIEW you use, but I have not seen this message before.

  Good luck

  PH

• Why the prores files original with stereo tracks into first on the single audio track?

  Why the Prores files original with stereo tracks into first on the single audio track?

  Here are a few ways.

  Adobe Premiere Pro CC: Separate Audio channels. Larry Jordan

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• problem with Safari and the opening of sites

  problem with Safari and the opening of sites

  Please describe the problem in more detail?

  Try to reset the settings of Safari:

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select the Preferences/Privacy tab

  4. click on remove all data from the Web site

  5. close Safari.

  Remove cache Safari files:

  1. click on finder

  2. look for the menu GO to top

  3. click on GO and hold down the option key. This will show a user library folder.

  4. click library and find the Caches folder

  5. in the folder caches com.apple.Safari Ouvrezledossier

  6. move the Cache.db file Trash.

  This should solve the problem. If it does not help, try to disable the Safari extensions

  1. open Safari

  2. click on the Safari menu at the top (to the right of the Apple logo)

  3. Select Preferences

  4. find the Extensions tab

  5 disable all extensions of

  6. relaunch Safari

• Want to Phoenix 860-010: problem with fonts and the noisy fan

  I have a new machine, just a day old, and I'm having a problem with fonts.  The file Explorer, Edge and other similar programs seem to go from a very readable font that lights up in half a second or less whenever I move down on the page in these applications.  Police that results is much more difficult for me to read because of the lightness that results. I have not met this problem before.  Frankly, I don't know the source of the problem.  Is it hardware (video card) or (Windows 10) operating system software?

  Hello @PhotoGene47,

  Thanks for the quick response!

  Have you tried to see the document that I mentioned in my previous post?  If you prefer to have the Board repaired, you can consider contacting the HP support by phone for additional options.  Please use the following http://www.hp.com/contacthp and create a folder for your question and contact HP. If you do not live in the United States / Canada, please click on the link below to get contact information for your region.
  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Kind regards!

• Skype 'problem with sound recorder '.

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  After working perfectly for months, when I now try to use Skype I get the above message.  CD works perfectly all the other its OK.  Skype gave me a chapter and verse to uninstall and reinstall Skype without change.  I guess the problem is in the web cam that contains the microphone and there is no purple light on that.  What can I do else?

  "Problem with sound recorder" suggests that there may be a problem with your input device.

  Open Device Manager (right click on my computer > properties > hardware > Device Manager) and search for "imaging devices". Click on the + to expand the category.  There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  While still in the Device Manager, click on the + next to "Sound, video controllers and game."  Locate the entry of your webcam microphone. There is a warning (yellow!)? Right-click and select Properties.  Is it the box at low say "use this device (enable)"? If not, do so and click OK.

  Take a look at control panel > sounds and Audio devices

  Click on the tab "Audio".  What is the default device for sound recording?  It should be your webcam; If this is not the case, adjust it using the drop-down list box.  Same thing for the "Voice" tab and the default device for voice recording.  Be sure to click on the "Apply" or the OK button.

  Click Start , point to programs , point toAccessories , point to entertainment and then clicksound recorder .  That you get error messages when you open or you try to open the sound recorder? If so, please include the entire message, without paraphrase, in your response.

• I have a windows 7 Edition licenses Home premium, still a problem with my words and exlel files.

  I use a copy of the license of windows Home premium 7, still I have a problem with my microsoft words and files, words excel files tke several minutes to open, but Excel files not not oped in my laptop, before I didn't have any problem, but now it's huge. When I ask some of them on the market, they suggested me to take the 32-bit and add 64-bit. Windows, it is the only solution for the same.

  Please suggest,
  Abhijit Gohan.
    

  Try to reinstall or repair your copy of Microsoft Office:

  How to reinstall or repair Microsoft Office : Notebooks.com

• Problem with sound in Windows 8

  I have problems with the sound on my Windows 8.  Playback sound worked but when I tried to record from a LP has heard no noise, I hunted and found a site that has created sound but when the recorder is not to use a buzz has been heard, I disconnected the player who stopped snoring, but now I have no sound at all.  I spent 4 days at this and at my age, the days are important. I now have the device connected to another computer Windows XP Pro and the sound seems ok.  I still want the sound to work on my brand new W8.  HELP PLEASE.

  Don Wilson

  Hi Don,

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the issue, have no sound in Windows 8 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  This tutorial can help you identify and resolve its current problems in Windows, including no sound from your speakers or headphones. This tutorial does not cover sound problems related to specific programs. Sound problems can be caused by cables that are not connected properly, damaged drivers, incompatible drivers, sound settings, missing updates and problems with your sound card.

  No sound in Windows

  http://Windows.Microsoft.com/en-in/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• Problem with pdf for the opening of the health gov Web site.

  Problem with pdf for the opening of the health gov Web site. I use my ipad in Safari and have installed the application to adobreader. Healthcare gov support only suggested to disable the pop-up blocker. I did, and I couldn't always open the file. No problem on a desktop computer regardless of the browser.

  In my view, they spend on their web server to a document ECM server authentication. Someone else has the problem?

  I tried the Penguin, Chrome and Atomic browsers on the ipad and the same issue.

  Thank you!

  Keren

  Okay, actually, I think that there is a problem with the type of form. It is a form of a special kind (called a form XFA or Designer, for what it's worth), which can be opened with Adobe Reader and only on Mac or Windows. There is no iPad software that can read these.