Problem with external scripts to run

Similar Questions

• Are there any known problems with external battery for iPhone 6 s karim?

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested in what Apple says rather than what says karim.

  Thank you.

  Jkim99 wrote:

  Are there any known problems with external battery for iPhone 6 s karim? Jackery of input: 5V / 2. 1a.

  I had heard that some may damage internal parts of the phone.

  I am interested what said Apple rather than what it says karim.

  Thank you.

  There is no Apple here in this technical forum from user to user.

• lately and I don't know why I see a pop up of a problem with the script. can some1 help me?

  There is a pop up of a problem with the script. He asked end and contuniue the script. I didn't have this problem before. Please help me this is getting really annoying. He asks a lot

  I changed a theme and almost never have a problem again...

• Having a problem with the script error message

  The error message and web page script error every move I make now. I tried to check and uncheck boxes tab in advance internet options. I also ran a check of the system that did not help either. Any suggestions? Thank you

  Hi Mic,

  From the description, it seems that you have a problem with the script error message in Internet Explorer.

  To better understand the question, please answer the following questions:

  1. is specific to a particular Web site question?

  2 have you made changes on the computer before this problem?

  3. What is the exact full error message and web page of script error message?

  4. When you get exactly the script error message and web page error message appears?

  5. what exactly you're talking about when you say "system check"?

  See the article mentioned:

  How to troubleshoot script errors in Internet Explorer

  http://support.Microsoft.com/kb/308260

  Hope the above information is helpful. If you have any question back to us, we are happy to help you.

• Problem with external HARD disk - cannot mount the mac partition and can't unmount the partition windows

  Hi all

  Need your help. I have problems with my external hard drive. I worked on it yesterday when the cable is a little detached and disassembled my intestinal HARD drive.

  Here are the specs:

  1 Macbook Air 11.5 "running on El Capitan (10.11.1)

  2 Buffalo Ministation external (1 TB) HARD disk divided into two: a Mac partition (for time machine) and the other a windows on FAT32 partition.

  Before the accident yesterday, it was working OK.

  Now, when I connect the HARD drive, it turns on but the Mac partition cannot be mounted (it does not appear on the Finder. I opened disk utility... just load forever and does not work) and the Windows partition is visible... but I can't take it apart without turning my computer.

  I can assemble and disassemble a USB stick very well.

  Any help would be appreciated.

  Thank you!

  Maybe you can explain a little better.

  I would like to make some general comments before having your replay.

  It is not wise to use TM on a disk with apple unformatted or partitions, it is preferable to have a dedicated TM drive also.

  For TM, the rule is that the drive is about 3 times the size of the boot disk.

  Normally you 'survive' a good step disassemble the drive external, but in this case with a another partition formatted on this subject, I'm not sure if that do not corrupt the disk, especially since the Windows partition is bootable. I have suspct the partition GUID on the TM partition table is corrupt.

  I propose to start the disk completely: in DiskUtility select the 'higher' level (name of manufacturer) and the Partition, one OS X Extended (journaled) partition table Partition GUID. And use it only for TM, is not too big for this.

  Have another drive formatted NTFS for Windows.

• Problems with external monitor and the Satellite U200 - 10 d

  I have a Satellite U200 - 10 d running Vista Business Edition. When I attach an external display screen flickers (horizontal lines on the screen)... It's worse when you move the mouse on the screen. The monitor on the laptop is fine I just have problems with the external display.

  The screen that I is a model VG1930WM viewsonic (widescreen) here is the specs of res for this screen...

  PC VGA up to 1440 x 900 non-interlaced
  Analog analog/digital RGB (75 Ohm, 0.7 Vc - c) / DVI - D

  Anyone have any ideas? I checked the graphics driver for vista and this is the latest version...

  HM, it's a nice solution, I have a friend with a similar problem.

  We will try your suggestion, snipe and perhaps give feedback if it worked for us.

  Welcome them

• problems with the script in indesign

  Hi all

  I'm new and scripts so I hope I can explain what I need

  Well, I have an indesign file in which I need to insert an extra layer with the translation of a language, have a layer IN English and an extra a FR for the french.

  I found a script that's like that

  with (app.clipboardPreferences) {}

  pasteRemembersLayers = true;

  }

  var docTarget = app.documents.itemByName ('French.indd');

  var docSource = app.documents.itemByName ('French.indd');

  If (docSource.isValid & & docTarget.isValid) {}

  var numSpreads = docSource.spreads.length;

  for (var i = 0; i < numSpreads; i ++) {}

  app.activeDocument = docSource;

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  App.Select (App.activeDocument.spreads [i] .allPageItems);

  If (app.selection.length > 0) {}

  app. Copy ();

  app.activeDocument = docTarget;

  If (app.activeDocument.spreads [i] .isValid) {}

  app.activeWindow.activeSpread = app.activeDocument.spreads [i];

  app.pasteInPlace ();

  }

  }

  }

  }

  but it seems to cause problems with the files,

  I have to say that the source is a file very heavy, even enter takes a long time.

  but I want to just get into the text layer,

  Do you think this script works finally, can you spot an error or something?

  Hello

  Your script is copying content of any doc (allPageItems) in an another doc - all number two need to have equal variances.

  You don't need to run the script if your goal is to create the new layer in the existing doc.

  The questions are

  What elements of the page must be copied into this layer

  AND

  should bound texts copied frames play any content

  AND

  wherever the content come from?

  Jarek

• Problem with sh scripts on ESXi 5

  I recently had to solve some problems with delays during renumerisations and restarts due to RDM which is attached to a host ESXi 5 discs. See this article for details http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1016106. Since I had a large number of RDM disks and needed to run the commands on each host I thought that I would write a script. I created the following scripts (just a subset here), but are there problems when it runs:

  Perennial.sh

  esxcli storage device base setconfig d naa.60000970000292600424533033434642 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033434643 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443041 - perpetually reserved = true
  esxcli storage device base setconfig d naa.60000970000292600424533033443133 - perpetually reserved = true

  and

  perennial_verify.sh

  esxcli storage device base list d naa.60000970000292600424533033434642 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033434643 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443041 > > storage_list.txt
  esxcli storage device base list d naa.60000970000292600424533033443133 > > storage_list.txt

  I put the files on a data store and gave them execute permissions and they seem to work, however when I run the scripts, they give an error at the end of running something on command not found or something. It does not run all the commands as well. Finally, when the perennial_verify.sh is run more than once something happens in the file storage_list.txt - he had me puzzed for awhile - he showed that the file was different from zero in size, but when I did a cat or less that he would say that the file is not found. Finally I tried to copy the file down in the browser of data store and found that there was a printable character appended to the end - possibly a return carraiage. Now I can not rename the file or delete it - it is impossible to remove. If anyone has any advice on running sh scripts and the correct way to pipe the output to a file I know you more.

  Thank you

  Ed

  What is the exact error do you receive when you try to delete?

  Rather than redirect the output for each order, simply redirect the script in the log file, which will capture the entire script.

  ./perennial_verify.sh > storage_list.txt

• Problem with external hard drive (an unexpected error - 50)

  I've had this problem for a few months now. Sometimes, I can't delete a file from my external hard drive, or export a file to it. The process is impossible, and I get a message "Cannot perform the action due to an unexpected error - 50". Ejecting the disc gives the message "eject impossible because another program can use it." Ejection force becomes the only option. After re-login, the problem goes away, like nothing ever happened.

  The question is not constant, but quite common to become a nuisance, the one I want stopped.

  That's what I think it is (a bad connection with the cable, defective contact), or is this a virus? I need to know.

  The hard drive is 1 TB Toshiba Canvio Basics and is formatted as Mac OS extended (Journalized).

  not a virus, and not only because there is no virus mac at this time.

  negative errors on the discs can be a signal indicating that the file is corrupted or worse still, the drive is failing. While it can also be a problem with the cable or the connector that it commonly goes back on the disc itself.

  Currently, it is recommended that you backup your data if a backup fails, you may need to save what you can manually and sometimes that means go to this folder by folder or file by file

  Use Time Machine to back up or restore your Mac - Apple Support

  All HARD drives (and SSD') eventually fail and while this isn't a your statement you should check the drive with disk utility (Macintosh HD/Applications/Utilities/Disk Utility) after you got what you possibly can off and consider replacing the disk with a new one.

• Ver El Capitan 10.11.6 - problems with external display

  I've updated my Macbook Air to the latest version of El Capitan (ver.10.11.6), and since then, I had problems with my external monitor: image is thus largest, out of proportion, and I can't seem to be able to set the zoom out or by using the display options. That's all just terrible to work with her. It is not my monitor because I never change its configurations, and there is nobody else who has access, and the problem started after I updated to version 10.11.6

  Any help will be appreciated!

  How do you connect the monitor?

  Mirroring your screen or to help us address display?

  What is the native resolution of your screen?

• Problem with external monitor when used with the Satellite P100-434

  I'm trying to use a Vizitron L - 151 monitor flat screen connected to the VGA port on the back of my Satellite P100 - 434 (PSPADE)

  I find that the screens seem to periodically - feeding cycle windows resize themselves and then the screens settle down again. This happens with the laptop and the external monitor.

  I've updated the latest available BIOS V4.20 (November 2, 2007) I use 7.15.11.6369 NVIDIA GeForce Go 7600 driver version. I'm under the edition of Vista Home Premium to standard build.

  I even resorted to the use of the dvd system recovery to rebuild completely the laptop and the problem persists. In Device Manager I have generic Non - PnP monitor and below that I have a generic PnP monitor I tried and it is not possible to get specific drivers for the monitor Vizitron L-151. * NOTE * I saw dxdiag that the external display is identified the Non - PnP device

  The display configuration that I'm trying to use is to have my laptop as the main screen with the external display on my left as an extension to the desktop. In display config my computer screen appears as number 2 with the additional display in the poster as a device 1

  While typing this my screens have made this three times and the last time, this IE7 window installs itself to the external display in restored down to size.

  If anyone has a glimpse of it, I would be very grateful. There are no problems when the external display is deleted.

  _I can reproduce this problem on demand_ by uninstalling the monitor Non - PnP Device Manager.

  Sorry, mate, but you ad confuses me a little and be hones I m not 100% sure what you take on
  You have some problems with the resolution of the external display or what?

  I've found another thread on the setting of the external screen as main screen:
  http://forums.computers.Toshiba-Europe.com/forums/message.jspa?MessageID=96263#96263

  According to this statement:
  > In display config my computer screen appears as number 2 with the additional display in the poster as a device 1
  It seems that the external monitor has been on the main screen and display books internal as external.

  I recommend you change this settings and to use books appear as 1 and the external display form 2.

• X230T USB 3 port sleep problem with external Blu - Ray drive

  Hi all

  I bought a new LG external blu - ray drive and I have problems with it sleeps very quickly.  It is recognized in Windows 7 and will be available for a short period of time after I turn it on, but if I don't use it for 30 seconds, it's in a kind of fashion 'sleep'.  It works perfectly on the single WE port 2.0 on the X230T so there must be something with the 3.0 port.  The drive is powered by an AC adapter and USB 3.0 cable included one.

  I tried to disable all the properties sleeping USB in all areas of power management and power options in Windows.  Also enabled and disabled USB hub root energy saving.  Also, I went through the BIOS and threw the USB options as well and can't find why it is go to sleep so quickly.  I have the latest firmware on the drive, as well as the latest drivers Lenovo USB 3.0 for the X230T.

  I guess I'm out of luck at this point because I think I've tried all possible solutions?

  Thank you.

  Hi again,

  I have looked on the specs and do not see why this problem should occur. I would make sure that the BIOS is updated, if you have not already. The latest BIOS for your machine is 2.03 and came out a month ago. This update, you can find here. And if this does not work, can you check and publish what are the settings in your BIOS Config > USB Configuration?

  Best,

  Adam

• Problems with Java script

  Hi, I'm doing a site with dream weaver cs5.  I am instituting a slider, this cursor uses java script coding, I'm not familiar with Java script. Here is the site that I have problems with. Www.bussmanncomputers.net/Jara.

  What said Teodor, the jQuery library is not found as can be demonstrated when we follow him - http://www.bussmanncomputers.net/Jara/js/jquery.js - link you have placed in your document online.

  The only reason why there is a 404 error is because the file is not in the specified location, it has not been downloaded to the location of i.o.w..

• "I use CS2 in Windows XP sp2, 32-bit, interested in CS3 &amp; tried to download &amp; install, giving message" "code error 1720" problem with a script required for this installation and windows package install ".

  Currently I am interested in CS3 & CS2 user, so I doenloaded CS3 but gives the time installation message "Error 1720, there is a problem with this windows package install." A script is required for this installation to complete, contact technical support.

  Google search for help with the problem of Windows...

  https://www.Google.com/search?q=Error+1720&SourceID=IE7&RLS=com.Microsoft: en - US: IE - address & ie = & oe = & gws_rd = ssl

• Problems with the script to output event

  In fact I don't know if I have a problem with the Exit event or if there is something wrong with my script syntax... The output of a field event, I check if the field is empty or not and check a flag I put in place.

  The first if statement works - if I get back a value in the field, everything goes as planned. If I delete the value of the field, nothing happens.

  //if field has a value hide subSection04
  if (!(this.rawValue == null || this.rawValue.length == 0))
  {
       subSections.subSection04.presence = "hidden";
  }
  
  //if field is empty and flag equals true show subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == true))
  {
       subSections.subSection04.presence = "visible";
  }
  
  //if field is empty and flag equals false hide subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == false))
  {
       subSections.subSection04.presence = "hidden";
  }
  

  There are a few groups radio button that also control this behavior, they are all inter relate. So I tried also triggers the Click event of a radiobutton Group (which resembles the value in this field) out of this area, but that doesn't seem to work.

  Hi Jono,

  Your expression subFlags.Commercial.rawValue is true compares a String data type with a Boolean data type.

  Edit the expression as subFlags.Commercial.rawValue is 'true'

  I hope that this should work for you.

  Your code should look like

  //if field has a value hide subSection04
  if (!(this.rawValue == null || this.rawValue.length == 0))
  {
       subSections.subSection04.presence = "hidden";
  }
  
  //if field is empty and flag equals true show subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "true"))
  {
       subSections.subSection04.presence = "visible";
  }
  
  //if field is empty and flag equals false hide subSection04
  else if ((this.rawValue == null || this.rawValue.length == 0) && (subFlags.Commercial.rawValue == "false"))
  {
       subSections.subSection04.presence = "hidden";
  }
  

  Nith