Similar Questions

• Problems with unwanted spaces between sentences

  I am updating our website for work and I'm trying to add information on a single page. Whenever

  I hit enter after an entry he adds a huge space between each sentence linked below:

  Lee County
  Population 2000-115 092

  
  Population 2010-140 247
  1990-2000 change - 21.9% increase

  I don't want a space between the two Populations, but no matter what I do, it adds a he. Any advice? Thank you!

  The Enter key is treated as a paragraph break.  So, if you look at your code you will see:

  Lee County
  
  Population 2000-115 092

  Population 2010-140 247
  
  1990-2000 change - 21.9% increase

  If you want just a line break down a single line, you can hit CMD / CTRL + ENTER, entering in the
  pause in your code if it ends with:

  Lee County
  

  Population 2000-115 092
  

  Population 2010-140 247
  

  1990-2000 change - 21.9% increase

  Or alternatively you can put the information in a table of 1-column 4 rows then each cell of the table will give you space.

• Problems with the space between the lines

  My problem is basically this: space keeps appearing between the rows in my table when I saw my page in a browser. The Dreamweaver design view displays without space (I like), but when I take a glance in Firefox or Internet Explorer, unwanted space appear.

  I spent hours scouring the internet looking for the solution to my problem, and none of them does not seem to do the trick. I cellpadding = "0" cellspacing = "0" inside the tag table, which proved to be the answer for others when they have had this same problem, but he has not yet fixed my problem. My CSS specifies also no margin at the top or bottom of the ul and li.

  Anyway, if you could take a look and give me some advice, I would really appreciate it.

  Thank you.

  Here's the html code:

  Home On Work Blog Shop Contact
  	Welcome to the all new amoterocreative.com Title of news Insert brief comments, images and other news here.		Twitter feed here
  	Let's Talk. Phone: 417.622.7432 Electronics: address (at) website Contact form: click here	Let's network. < / h5 > Facebook Twitter LinkedIn

  And the CSS:

  <style type="text/css">
  /*NAVIGATION*/ 
  ul
  {
  list-style-type:none;
  line-height: 1;
  margin-top:0;
  margin-bottom:0;
  }
  
  
  
  /* li */.navli
  {
  display:inline;
  margin-top:0;
  margin-bottom:0;
  }
  
  /* h1 */.nav 
  {
  font-family:Helvetica, sans-serif;
  background-color:#006738;
  text-align:center;
  }
  
  .nav:link {color:#ffffff;text-decoration:none;} /* unvisited link */    
  .nav:visited {color:#ffffff;text-decoration:none;} /* visited link */
  a:hover {background-color:#4D9574;} /* mouse over link */
  .nav:active {color:#4D9574;} /* selected link */
  
  /* Body Text*/
  h2 
  {
  font-family:Helvetica, sans-serif;
  font-size:1.875em;
  text-indent;0px;
  color:#000000;
  }/* 30px/16=1.875em */
  
  h3 
  {
  font-family:Helvetica, sans-serif;
  font-size:24px;
  text-indent;0px;
  color:#000000;
  }/* 30px/16=1.875em */
  
  /* p */.bodytxt
  {
  font-family:"Trebuchet MS", sans-serif;
  font-size:14px;
  text-indent:20px;
  color:#7E7E7E;
  }
  
  /* Sidebar */.side
  {
  background-color:#006738;
  font-family:"Trebuchet MS", sans-serif;
  font-size:14px;
  text-indent:20px;
  color:#ffffff;
  }
  
  .ftnav:link {color:ffffff;text-decoration:none;} /*unvisited link*/
  .ftnav:visited {color:ffffff;text-decoration:none;} /*visited link*/
  
  /* Body Background */ 
  .bdy
  {
  background-color:#d1d1d1;
  }
  
  /* footer */.foot
  {
  background-color:#4C4C4C;
  font-family:"Trebuchet MS", sans-serif;
  font-size:14px;
  text-indent:20px;
  color:#ffffff;
  }
  
  </style>
  

  Hello.. I am a beginner... I don't know if I understand your question... Maybe you could try adding a universal selector(the * symbol) and then to zero the padding of the cell and the margin.

• problem with storage space - iPhone 4 - 32 GB

  Hello, I have an iphone 4 32 gb. I'm having a problem with storage space. A few days ago, that even though I was taking 5 GB of empty space, a notification appeared that storage is almost full. I deleted about 2 GB of photos and videos. He showed me 2 GB of free space, but after 1 hour again the same notification appeared. As soon as I have emptied my space with about 1 to 2 GB by deleting photos or videos, it is completed with other data.

  How should I solve this problem?

  Thank you.

  What is the exact wording of the message? Could he be referring to iCloud storage?

  Also have you withdrawn your recently delete pictures and videos? Deleted ones is 'saved' for 30 days or more unless you intentionally delete/remove

  Why my iOS device I have more pictures that I can find?

• Problem with anchor points, shifts vertically in the browser view. What is the problem?

  Problem with anchor points, shifts vertically in the browser view. What is the problem?

  have you allowed for the height of your head? I had to put my anchor above my content by the height of the header, otherwise, the upper part of my content was hidden behind the header

• How can I broadcast menu items with equal spaces between words?

  Hello, I use the feature of automatic menu of Muse with words in boxes centered menu, which creates irregular spaces between the words. Is it possible to bring up the menu with equal spaces between the actual words?

  Thank you.

  

  Yes, in the properties of menu select 'uniform spacing.

  

• I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have a problem with synchronize them between (summary) video and slides in IPADs, HTML5. Please, help me!

  I have an idea, I think that what's happening is the fact that the video is not charged, it cannot find the video, he goes to the last downloaded part.

• How to remove the extra space between two Table HTML

  Hello
  
  I wrote a code for printing costs. But there is more space between two Table Html, how I can remove it.
  
  Please run that Code
  
  Start
  
  HTP.p (')
  < html >
  (< body > ');
  
  HTP.p (')
  < TABLE align = "left" width = "500" cellspacing = "0" cellpadding = "0" border = "1" >
  < tr > < td align = 'right' white-space: nowrap; > Ph-2201751 < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > < B > < table > < /B > SATYAM MODERN PUBLIC SCHOOL
  < td > < table >
  < /tr >
  < b >
  < td align = "center" white-space: nowrap; > < i > < H3 > (AFFILIATED to THE CBSC, NEW DELHI CODE No. 53544) < / H3 > < /I > < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > new colony Braham, - 131001 (h) < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > RECEPTION COSTS < table >
  < td > < table >
  < /tr >
  < /table >
  < TABLE width = "500" cellspacing = "0" cellpadding = "0" border = "1" >
  < b >
  < td width = "100" white-space: nowrap; > receipt no.: < table >
  < td width = "100" white-space: nowrap; > Date received: < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > name: < table >
  < td width = "100" white-space: nowrap; > father name: < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > class & s: < table >
  < td width = "100" white-space: nowrap; > A/C No. : < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > from: < table >
  < td width = "100" white-space: nowrap; > to: < table >
  < /tr >
  
  (< /table > ');
  HTP.p (')
  < / body >
  (< / html > ');
  end;
  
  
  Thank you
  
  Ed

  Hello

  HTML is valid, that your code print?

  Wouldn't be as below?

  BR, Jari

  Published by: jarola on December 18, 2009 15:22
  I test your code
  http://Apex.Oracle.com/pls/OTN/f?p=40323:25
  I can't see any extra space between the tables

• Problem with disk space C or WinDir

  Hello

  I have problem with space Partition C:\

  Because the driver does not match the photo below?

  And now the disk space is full of unreasonable.

  

  Please help me!

  Hello

  I don't see what your problem is, as you're singling out a piece of data, the program (x 86) files on which is placed on your hard drive.

  Where do you think that Windows 7, etc is installed?

  It is installed on the C: drive and also takes place on it.

  ___________________________________________________________________

  This free program allows you to see what is taking place.

  http://www.Jam-software.com/treesize_free/

  Also check how much space system restore uses:

  http://Windows.Microsoft.com/en-us/Windows7/how-much-disk-space-does-System-Restore-require

  _____________________________________

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  _____________________________________

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And Norton Backup, if you are using Norton, can do strange things with filling of hard drive space.

  See you soon.

• Problems with dial-peer between routers cisco 3925

  Good afternoon...

  I have a problem when we want to connect telephony between two routers 3925, on both routers and I configured the

  telephone service (phone service), I released my phone and there is an internal communication in each of them (I can do

  between the phones of the same router), each router I have configured a dial-position intercomunicarlos and this is where the problem arises. When I try a telephone line in the router for each B telephone router A composed the Ringout timeout and mark Unknow number is finished, when I make a call, the router that has the phone number of this brand, I run sh call status command and tells me that there is an ongoing call and you use , the problem with the dial-peer, is that it seems that the other router you call never happens.

  I help a lot to get an overview of why this happens.

  Thank you

  Excuse my English is not very good

  In addition what IOS you're running, calls can be prevented by the mechanism of toll-free fraud if it is 15.1 or newer.

  HTH,

  Chris

• Problem with VPN compatibility between 2811 and 2911

  Hello

  I would ask anyone had problems with the implementation of a VPN tunnel between 2811 and 2911?

  The IPSec VPN is established, but for some reason, I cannot ping the side LAN across LAN to the other end of the VPN router?

  All experience would be highly appreciated

  Thank you

  IPSec VPN can be smoothly between routers cisco (and not nesesserely cisco) set up, so there should be no problem in your case.

  If you say that this tunnel is established successfully, then the problem most likely related to routing problems between sites or incorrect configured crypto-acl. Check if the hosts located on both sites have correct routing information on how to get to subnets on the other site.

  Make more accurate assumptions, it would be helpful that you provide config on both sites and describe your topology.

• Problem with DHCP broadcast between VLAN

  Hello

  I trying to solve the lab that I set up, I have a problem with broadcast between VLANS with my DHCP. I looked around the vmware community to find my answer, but I did not who is right why I post here!

  So here's my situation :

  • ESX with 2 race of VM:
    • An R2 of 2012 Windows running a DHCP server with a configured scope
      • This virtual machine is assigned to the vmnic4 with the port VLAN 100 group
    • A Windows 7, which I use as a customer
      • This virtual machine is assigned to the vmnic4 with the port VLAN 110 group
  • Switch Cisco with a simple configuration:

  interface FastEthernet0/1

  Description LINK FOR ESX

  switchport mode trunk

  switchport nonegotiate

  interface FastEthernet0/24

  Description OF LINK ROUTER

  switchport mode trunk

  • Configuration of the Cisco "router on the stick:

  interface FastEthernet0/0.100

  encapsulation dot1q 100

  10.1.1.254 IP address 255.255.255.0

  interface FastEthernet0/0,110

  encapsulation dot1q 110

  IP 10.1.2.254 255.255.255.0

  IP helper 10.1.1.0

  
  

  The resolution of the problems that I did:

  • Affecting the client static IP and that both virtual machine can ping each other
  • Moving from the client to the same VLAN as DHCP server, and the DHCP server is to give the client an IP address.
  • Sniffing the packet:
    • I can see the client DHCPDiscover
    • I can see the router with the command "debug ip dhcp server packet" package passed on the 10.1.1.0.
    • I am not able to see the packets from the router to DHCP perspective

  That's why I guess miss me something ESX configuration.

  Thanks in advance for reading this post!

  
  

  PS: I've linked a vswitch configuration screenshot
  

  I think that you have configured an incorrect address of IP support, take a look at the following line:

  IP helper 10.1.1.0

  
  

  Your DCHP server is really 10.1.1.0? I think not, since 10.1.1.0 corresponds to the ID of the network 10.1.1.0/24 network.
  

• How can I put extra spaces between hyperlinks?

  After I have insert hyperlinks are too close together and they are very difficult to determine where they are separated from each other. How can I insert a space between the links so they are more readable?

  that did not work

  It does not work. It's the solution to your problem, unless you want to add some CSS to add a padding around you are a tags

  &*nbsp;

  This time remove the asterisk after the ampersand. Repeat this sequence of characters to add more space. This works.

• Problem with "Filling space" described in the Blog of Tim

  Dear Experts,
  I use the invoice template described in the excellent Blog of Tim Dexter (Anatomy of a model) to produce my own version. However, I have problems with the 'fill' space as described here: http://blogs.oracle.com/xmlpublisher/2007/03/anatomy_of_a_template_ii_heade.html
  
  My model is almost identical to the example, when I import XML data when there is only a single folder, fill space have not not cushion with enough blank lines so that the Total of the table at the bottom of the page, does not correspond with the watermark that I. The code in the field "Fill the space" is as in the Blog:
  
  <? If: not (count ($invLines) mod $lpp = 0) and ($start + $lpp > count ($invLines))? > <? for each: $invLines? > <? If: position() < $lpp - (count ($invLines) mod $lpp)? >
  
  
  If the number of records is greater than half a page or more, then the padding is correct. This is even if the word to say on the third page, it is a single record. Therefore, it seems that the padding does not work if the number of records is less than half a page total.
  
  Is this correct and what someone have a solution - would be greatly appreciated.
  
  Thank you very much
  Mark

  Hi Mark,

  I had problems with this earlier. See the comments on the bottom of the blog post you linked to above. The problem is down to the filling loop is a variable containing the invoice-based. If the number of invoices in this recordset is not sufficient to provide all the required filling lines, the formatting goes belly up.

  For loop in the XSLT file, you must use models of void. I got it going with my report using the code here:

  http://www.IBM.com/developerWorks/library/x-tiploop.html

  Basically you call recursively model for the number of required fill lines. A lot of effort but far as I could tell, the only solution given the available technology.

  I hope this helps.

  Jon.

• Problem with IPSEC tunnel between Cisco PIX and Cisco ASA

  Hi all!

  Have a strange problem with one of our tunnel ipsec for one of our customers, we can open the tunnel of the customers of the site, but not from our site, don't understand what's wrong, if it would be a configuration problem should can we not all up the tunnel.

  On our side as initiator:

  Jan 14 13:53:26 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (initiator), 2.2.2.2/500 remotely, authentication = pre-action, encryption = 3DES-CBC, hash = SHA, group = 2, life = 86400 s)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-7-702201: ISAKMP Phase 1 delete received (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:26 172.27.1.254% PIX-6-602203: ISAKMP disconnected session (local 1.1.1.1 (initiator), remote 2.2.2.2)

  Jan 14 13:53:56 172.27.1.254% PIX-7-702303: sa_request, CBC (MSG key in English) = 1.1.1.1, dest = 2.2.2.2, src_proxy = 172.27.1.10/255.255.255.255/0/0 (type = 1), dest_proxy = 192.168.100.18/255.255.255.255/0/0 (type = 1), Protocol is ESP transform = lifedur hmac-sha-esp, esp-3des 28800 = s and 4608000 Ko, spi = 0 x 0 (0), id_conn = 0, keysize = 0, flags = 0 x 4004

  The site of the customer like an answering machine:

  14 jan 11:58:23 172.27.1.254% PIX-7-702208: ISAKMP Phase 1 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-7-702210: Exchange of ISAKMP Phase 1 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% 6-PIX-602202: ISAKMP connected session (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-6-602201: Phase 1 ISAKMP Security Association created (local 1.1.1.1/500 (answering machine), distance 2.2.2.2/500, authentication = pre-action, encryption = 3DES-CBC, hash = MD5, group = 1, life = 86400 s)

  14 jan 11:58:23 172.27.1.254% PIX-7-702209: ISAKMP Phase 2 Exchange started (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  14 jan 11:58:23 172.27.1.254% PIX-6-602301: its created, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645) sa_trans = sa_conn_id of hmac-sha-esp, esp-3des = 116

  14 jan 11:58:23 172.27.1.254% PIX-7-702211: Exchange of ISAKMP Phase 2 is complete (local 1.1.1.1 (answering machine), 2.2.2.2 remote)

  Jan 14 12:28:54 172.27.1.254% PIX-6-602302: SA deletion, (his) sa_dest = 2.2.2.2, sa_prot = 50, sa_spi = 0x9de820bd (2649235645), sa_trans = esp-3desesp-sha-hmac, sa_conn_id = 116

  Kind regards

  Johan

  From my experience when a tunnel is launched on one side, but it is not on the other hand, that the problem is with an inconsistency of the isakmp and ipsec policies, mainly as ipsec policies change sets and corresponding address with ASA platform when a tunnel is not a statically defined encryption card he sometimes use the dynamic tag to allocate this vpn connection. To check if this is the case go ahead and make a "crypto ipsec to show his" when the tunnel is active on both sides, see on the SAA if the corresponding tunnel is the static encryption card set or if it presents the dynamic encryption card.

  I advise you to go to the settings on both sides and ensure that they are both in the opposite direction.