Problem with file mp3 Toshiba Store TV +.

Similar Questions

• Problem with uninstalling the Toshiba Bluetooth Stack for Windows

  Guys, I have a problem with uninstalling the Toshiba Bluetooth Stack for Windows v4.00.22 on my laptop Windows XP SP2. Whenever I choose to remove the "battery Bluetooth for Windows by Toshiba" (or "Bluetooth HID Switch Service") the installation program starts to prepare, but crashes after a few minutes - the only way to continue is to turn off the laptop.

  The same thing happens when I try to update the stack to the latest version - the installer says that the old battery has to be removed first and crashes after trying to remove it. So is it possible to remove it by hand? I really don't want to reinstall Windows!

  I don't have a copy of the original Software v4.00.22 to recharge so if you have a copy or know where I can get a copy I would gratefully

  Thanks in advance.

  I would try to delete the folder: "C:\Program Files Toshiba Stack.
  Registry settings will remain, but should be repaired after a new installation of the Bluetooth stack.

• Problems with file extensions, Vista is slow and crashes

  Salvation of problems with file extensions...   My computer is very slow and is stuck...

  Hello

  Use the startup clean and other methods to try to determine the cause of and correct problems.

  -----------------------------------------------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

• I have a problem with file compression and then not be able to extract their share at a later date

  original title: file compression

  I am running Vista Home Premium on my laptop. I have problems with file compression and then not be able to extract their share at a later date. For example, I sent a file compressed to my instructor and she pointed out that she had a .zipx extension and the fact that she was unable to extract the files of ranking. Can someone help me with this problem?

  Hello

  1. do you have a third party compression/extraction of software installed on your machine?
  2. do you get an error message when you try to extract the files?
  3. is the relevant question for the particular file type?
  4. don't you make changes to your computer before the problem?

  Follow the steps and check if they help.

  Step 1:

  Open zip files is to open the folder and drag the content to another folder.

  See article:
  Compress and uncompress files (zip files)

  Step 2:

  If you have a third party software to Compress/decompress, I'd Uninstall it employs the way Windows compression and decompression of files/folders and see if they help.

• Premiere Pro 7.0 - problems with some mp3 files

  Well, I'm back with a new question. Because I need sound effects for my film, I use sounddogs.com and I get sound effects as MP3 files. First can manage very well, but from time to time I'll get a file first refuses to play, and instead of it gives me no sound at all. Other files in this site work very well, so I have no idea what could be the problem. Any ideas? You guys saved my movie before, I have no doubt that you can do it again. Thanks for any help.

  MP3 files are often problematic. I always convert everything except the tiny SFX (like yours) to 48 KHz 16-bit PCM/WAV to Audition. The great little free-audio editor, Audacity, it will also. Just drag the file in Audacity (or open) and Save_As. fact!

  Most of the issues seems to be with some of the "tricks" that can be in an MP3 player, such as the art of the album.

  Now I have also some SoundDogs SFX, but have never had a problem with one of the time. However, the conversion is almost instantaneous and worked 100% for me.

  Good luck

  Hunt

  PS - Note that conversion to WAV format do NOT recover the fidelity lost with MP3 compression.

• Satellite M645 - problem with files from Ipod

  I recently had two other notebooks die on me so why I got a brand new Toshiba Satellite M645.
  I have two ipods with music on them from one of the computers.
  When we follow the ways to transfer music on my new computer that I will meet different problems with each of them.

  The first problem is on my video Ipod.
  After clicking on the hidden folders and etc when I find the music file, it shows the files for everything except music.
  Here is the list of files, it gives me

  Calendards
  contacts
  garbage
  NISAM
  Notes
  recycler
  ground
  USB 2.0 driver
  zurim

  If someone could help me with this, or maybe send me to another forum or page that might help me.

  My other is an ipod touch.

  And when going to the devices, it rises driver device USB mobile apple instead of an ipod just like my other.
  When you click on it instead of display the files it just go to the properties and has two tabs, general and material.

  Once more if anyone knows how I might be able to get these on my new computer, I would be very grateful

  That has nothing to do with Toshiba but with your Ipod.

  On the other hand; I have an iPhone and the management of the files it s similar iPod.
  All files need iTunes and using iTunes, you can control files and move between computer and ipod

  However, I recommend you to visit the forum for ipod problems

• Problems with drive HARD Toshiba MK1234GSX

  Hello

  I have an Acer with a secondary HD TOSHIBA MK1234GSX 9920.
  Since I installed Windows 7, I have problems with the HD.
  Upon restart, the HD is considered as having problems with windows: when I look in device management, I have this message "Windows has stopped this device cause it has problems. (Code 43) »
  I did a full scan (chkdsk), but no not found errors.
  If I turn off the HD, reactivate and restart, sometimes I can access the HD which works perfectly.
  Does anyone have an idea on this?
  Thank you.

  PS: Sorry for my English :)

  CHKDSK is not good to test a HARD drive for bad sectors, its only good when looking for errors of the filesystem (FAT32 or NTFS).

  Test the hard drive to find errors using DFT.
  DFT download: http://www.hitachigst.com/hdd/support/download.htm#DFT

  Download the ISO file and burn it to a CD - R disc (there is also a version on disk if it's easier).
  If you don't know how to burn an ISO file, read this guide: http://www.petri.co.il/how_to_write_iso_files_to_cd.htm
  Restart your laptop and boot from the disc of DFT.
  Choose the 'Advanced' test and let it run (it may take an hour or two).
  If you see a message in red box, the HARD drive is faulty.
  An error code 0 x 70 means there are bad sectors and the HARD drive needs to be replaced.

• Tecra M5 Sysprep problem with file hdaudbus.sys

  We have a syspreped image, that was created on a Toshiba Tecra M2.

  Our current image works on the following model of machines: -.

  Toshiba Portege 4000
  Toshiba Portge 4010
  Toshiba Portege M100
  Toshiba Portege R100

  Toshiba Tecra M2
  Toshiba Tecra S1

  Toshiba Satellite Pro 6000
  Toshiba Satellite Pro 6100
  ----------------------------------------------------------------------------------

  We should now get the image while you work with the new Toshiba Tecra M5.

  The driver that I have a problem with is HDAUDBUS.sys

  When the machine starts first, and almost before it even tries to build some itsself, it says it cannot find the file 'hdaudbus.sys' and it seems that it is in the D: research, if you navigate to system32\drivers, then the driver is installed correctly, but I can't seem to automate this process.

  I copied all required driver files and inf.
  I filled the sysprep.inf (under the heading "OemPNPDriversPath") file with the driver and the correct path. It made no difference. I also 'DriversSigningPolicy' value 'IGNORE '.
  I have sysprep using the image - pnp, mini installation then close it carefully.

  The question is:-

  (A) I do something wrong, and is there a good way to get windows/sysprep automatically install this driver?

  (B) I have a fix for the problem above, is:--
  Put our sysprep would be the image on the Tecra M5, manually installed ALL of the correct drivers and then re-Sysprep image. The question is, is it OK to do this? (It seems to work)? Or is it not advisable to sysprep image, several times, on different model machines?

  Any advice would be appreciated!

  Thank you

  Hello Mark

  Your ad is very interesting, but I don't really know which should help you. As you can see that he is user in the forum and you'll be lucky if anyone can tell you anything about your problem.

  This file is Microsoft one and try to check in a Microsoft support page, if there is solution available.

  In any case good luck!

• Problem with new PC Toshiba laptop

  I don't have good experience with Toshiba as a great brand.

  I brought a new laptop of dicksmith elizabeth her (SR4192426). At the time of the sale, the saleman said if you have a problem with the machine to come back and we can repair or replace. This is the Australian rule if you have a problem with in month thn, it should be replaced rather than fixing. I have problem starting with the product within one month, I approach of dicksmith three times, but they gave me a lollipop. I am very disappointed by the service of dicksmith. I am very disappointed by the service of Toshiba. I sent to iseekcomputing and call back from their $65 would be paid by the customer to solve this problem, if the same problem is coming soon in the future that agaim pay $65 to fix.

  I have the Toshiba team ring that they reset as factory defauld but the problem. In the end, I want to replace my laptop because I am not happy with that. I've used nothing, much work is underway and my laptop is still iseekcomputing since Monday.
  Kulwant singh

  In the end, I want to replace my laptop because I am not happy with that.

  AFAIK that the manufacturer of the device does not replace the unit, but in case of hardware problems, the warranty will cover the repair costs.
  If you want to replace the unit purchased, you will need to talk to your dealer who...

• Problem with subtitles on Toshiba 40VL748

  Hello
  I experienced some problems with subtitles. When I'm with DLNA subtitles appear not at all. Same subtitles for the same film display correctly when the file is run from a USB key.

  Someone managed to run subtitles using DLNA? And another question - why subtitles are so small?
  Is it possible to increase the font size?
  If this isn't the case it is possible to change it in the next update of the software?

  Hey,.

  I was found no more information on the subtitles in the TV manual. I put t think there is an option to increase the size of the font. Probably he also according to the name of the file.
  Have you tested different files with different names?

  What you can do is trying new TV software as indicated in your user manual and reset the TV by default. Maybe it helps :)

• Problems with the modem Toshiba G450

  Hello

  We faced a problem. We have installed a software and drivers of Toshiba g450 on different laptops to use it as a modem for a mobile phone network. When we have logged in as administrators all fine, when we have logged on as a normal user in the field, the software will search the modem without success. We do not have such a problem with other USB modems.

  Thank you

  André

  Sorry Andrew, but this forum is explicitly designed to discuss with the portable mobile computer.
  G450 laptop, desktop, PDA, or cell phone is?

• Problems with file renaming Applescript

  Hello all and thanks in advance! I am currently working on a set of scripts that will work in tandem, and I got everything settled except this little AppleScript. It is essentially supposed to rename all the files in a given location at just the last two "words" in a folder (which are essentially the UID) and I used it several times in the past with success, but now that I have removed the guests 'choose folder' and instead of giving a specific path, I ran into the question after question. Here is my script up to now:

  Tell application "Finder".

  Repeat with this_folder in "Macintosh HD:Users:Server:Desktop:Test"

  name of the value folder_name this_folder

  Tell me to define the word - folder_name 2 contract

  Tell me to define the word entity - folder_name 1

  Set final_name to contract & "-" & entity

  If not (file final_name) then

  Set the name to this_folder to final_name

  end if

  end repeat

  tell the end

  say

  I'm now see "unable to get the name of \"M\. ' number-1728 name of "M".

  I thought it was a problem with the path at first, so I commented on the remaining elements of and had no problems from there. As I said, this script worked well when there was a prompt "choose a folder '; the only change that has been made is the reference to the file prompt. Thank you once again.

  As a first step, you should have written:

  Repeat by this_folder in the file "Macintosh HD:Users:Server:Desktop:Test"

• Problem with files Cipying

  I was able to copy the 250 GB of files to film a box connected Western Digital Media, but when I try to copy files from a small portable USB key or on the network from a NAS, I get an icon with a cross through hand.

  Any chance someone could let me know what it is and how to work around?

  What USB device you are using and what laptop do you really?

  You have this problem with different USB keys?

• Problems with WiFi from Toshiba and their lack of support - you're not alone

  For those of you out there problems with WiFi on a Toshiba laptop, you're certainly not alone.

  Over the past years, I have noticed a growing number of different brands and models of computers laptop toshiba and laptops with the same problem.
  Last year, 100% of the toshibas that came in my workshop have had this problem, it is about 75% of the laptops that I fixed.

  These models have all hardware wifi (Agere, Intel and Realtek)

  The wifi switch is on, on the same computer, some programs to detect as being market, others see it as extinct.
  What, it doesn't connect to a same wireless router when used to.

  Responses of toshiba were the usual non-professional form response from: it must be the router, try to flip the switch, you have updated the bios?, update the drivers et al.

  It is a software problem, and given the number of people on this forum talking about the same issue, it's a great.

  Often, I came across the issue of windows for communication services wireless disabled by software of Toshiba and I believe, that it is a conflict between tosh software and various other (zone alarm, windows and al.)

  In some cases, the software seems to intervene and to corrupt the OS from windows drivers and interfere with their implementation and enforcement, which is worrying, the software doesn't have to touch all areas. (if not, what is the point of a BONE in layers)

  I sometimes managed to force to work (for example manually restart the services), but these solutions are not a "clean way" of doing things.

  The most reliable way to solve this problem seems to be, backup your data and reformat back to the manufacturer's specifications, and then immediately uninstall the software from toshiba and update the drivers terribly old (even those on the site are about one year more up-to-date for the model I'm working currently on.) Unfortunately most of my clients is companies that need a LOT of data stored in different saved locations, then a ton of programs specialized to be reinstalled, which is slow and costly.

  Message from TOSHIBA:
  Please make it a sticky in this forum for all the REAL solutions, not one of the threads that I watched with your suggestions has been resolved.

  If there is little no support for your products in this regard, I will contact the ACCC, choices, and associations of trade fair with an open letter that I ask all customers affected to sign, and I will put a national call for people with the same problem to come forward.

  I would like to ask also if you encounter a problem where your wifi stopped working and it does not detect or work, please just post "bump" under here so that we can keep way reasonably clutter free.

  I used to recommend Toshiba and Asus for laptops, now, this list is one.

  Greetings from the Australia (aus site sent me here for the forums)

  Damien Holley

  +@lonetraider+
  You can do what you want but as mentioned above; WiFi problems are not specific to a laptop manufactures, you'll notice WLan issues on computers (laptops, desktops computers) all manufactured products.
  I had 4 different books of four various manufacturers and ALL had problems of WiFi, but most problems could be solved by the driver update, change, or reset of the router are.

• What are the Causes of 'loop Hang"problem with file i/o when using timed multiple loops on one OR cRIO-9012?

  Normal 0 false false false fr X-NONE X-NONE / * Style Definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}

  I experienced a problem with an application. I think I've isolated the problem in the "Timed loop question - Source Code.zip" attached source code. A detailed list of my results are in the attached document "Timed loop detailed question - Results.docx.

  Overview - it seems to be closely related to the IO files and the use of "Timed loops" on the OR cRIO-9012

  1. If I activate the e/s in two loops, then two loops crash simultaneously

  2. If I activate only the e/s in a loop, then only this loop crashes

  3. If I activate the e/s in two loops and make a 'While' loop earrings, then it don't crash

  4. If it is wrote nothing in the file I/o, then it don't crash

  5. If the reference to the file is left open instead of opening and closing on each call, so it don't crash

  6. If I try to run it on "My Computer", then it don't crash

  7. If the IO is only activated in a loop and programmed to wait for one second between the file access, then it always crashes

  In my real application, any given row is only writing (at least) once a minute, but I couldn't still my application to plant within a period of 24 hours by writing a single error of a single loop once per minute, with a low CPU use. It was the impulse to test the seventh point above.

  It seems that the best solution was to open the reference to the file and let it open. I think it is a good practice in general and I'll do the update in the application. This should solve the problem, but it is very difficult to verify this due to the sporadic nature of the question. As such, I'd like to understand what was causing the problem so I can verify that it was fixed. So far, my attempts to create a single, coherent theory able to explain all aspects of this issue have failed.

  I just wanted to know at all that there has been a request for corrective action (CAR #214156) has filed for this issue to be fixed in a future release. This seems to be a problem with the VxWorks operating system, we use in real time. We have additional cRIO chassis which have a Pharlap OS where it does not work. For now, you can search for this CAR ID notes to see if this problem has been resolved for publication in the future.

  Currently, there are two solutions, we have identified for this problem:

  1. open the file before the loop and close it after. (recommended)
  2 perform file i/o in a normal loop and transfer data to a queue.