Similar Questions

• Mozilla is aware of the problem with protected in Flash Mode?

  Today I started to have problems to view integrated in Firefox 12 Flash content. I tried all the usual steps (for example to clear cache, disable extensions, update the plugin and then finally of this update to Firefox 13) but nothing worked.

  Then I found an Adobe forum which some contributors have experienced the same thing in the last days, and it seems to have had a problem with the Protected Mode in the latest version of the Flash player. I disabled this mode and everything now works perfectly again - so I thought I would bring it to your attention in case others have the same problem.

  The Adobe support article is here: http://forums.adobe.com/thread/1018071?tstart=0

  Hope you find it useful...

  Thank you, cor - el. Hope there is a fix before long, otherwise it doesn't seem to be that much interest in the application Adobe mode protected in the first place!

• M30X: Problem with standby and hibernation modes

  Hello

  In my M30x, I configured my laptop to Hibernate when near the lid. However, when I turn on the computer after this hibernation, there is a problem with the sound settings - I cannot play any music or cannot use a microphone outside, unless I reboot. If reboot is required, then there is no sense to use this feature of hibernation. Also, sometimes after these Awakenings (turn on after hibernation) my mouse (touchpad) spontaneously turns off. This happens when I plug my pc on TV, then come back and close the cover. There someone experiencing similar problems and can help me? Thanks in advance

  [Edited by: admin on 8 May 05 08:02]

  Hello

  It is not easy to say what can be the cause of this problem. I very often use the hibernation mode and there is no problem that even several applications are open. You have this problem only if the device is connected to the TV or every time after hibernation mode?

  It will also be interesting to know if this occurs after each process of awakening or first several modes of hibernation.

• Pavilion 15 laptop: problems with stop and "standby" mode.

  I upgraded from windows 8.1 for windows 64 bit home 10. I had problems with stop and goes into sleep mode and cannot be resolved, then I reinstalled windows 10. Everything worked fine for a few moments, and then the same problem reappeared. I can't stop or put my PC into sleep mode, unless I have first of all to make a restart. After a reboot, I am able to stop or go to sleep mode without problem. If I try to do either without a restart, the screen goes black and the indicator light remains lit. The only way I can get it to start then press on and hold the power button and force a shutdown down, then press the power button to restart the upward. I have another PC, a wafer think that Lenovox has been upgraded to windows Windows 7 10. This PC work fine with windows 10, no problem at all. It's just the HP Pavilion 15 who has these questions. It makes me crazy.

  Look through the tool of troubleshooting possible solutions here:

  http://support.HP.com/us-en/document/c03383935

• Problem with the input query mode. FRM 41009, 40301

  Hi all
  
  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.
  
  Now, I've wanted handled. So I created a trigger of error in order to handle the error.
  
  IF ERR_CODE = 41009 THEN
  NULL;
  END IF;
  
  A problem is that when you use the null value, it will not terminate the mode of input query, and then I get frm-40301 error.
  
  Second, it's that I can't use exit_form in a trigger of the error.
  
  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.
  
  Another solution would be to put the following code in the trigger when key pressed for each button in the form:
  
  If: system.mode = "ENTER-QUERY" then
  exit_form;
  end if;
  
  But I don't want to reproduce this code in my form.
  
  Please can you give me an idea how to handle this correctly?
  
  Thank you
  Michael
  
  PS: Version of the form = > ORACLE FORMS 10g (Forms [32 bit] Version 10.1.2.3.0)

  I have a problem with the mode of input query. What can I say, I'm in the mode of input query, and I click on a button. I get the error THAT FRM-41009 displayed.

  What is the code in the trigger of your button When-Button-Pressed (WBP)? Maybe you should check to see if the form is in the Mode query in your WBP rather than try and remove the error? In other words, eliminate error - do not delete it. :)

  If you want instead to remove the error, there is a technique to built-ins call restricted to a trigger that does not allow them. Do this by the use of a millisecond zero Timer. For example:

  /* Sample On-Error Trigger */
  DECLARE
    n_err_cd   NUMBER := ERROR_CODE;
    t_on_error TIMER;
    ZERO  NUMBER := 0;
  BEGIN
    IF ( n_err_cd = 41009 ) THEN
      /* Create Timer to execute Exit_Form() */
      /* to Cancel Query-Mode. */
      t_timer := Create_Timer('ON_ERROR', ZERO, NO_REPEAT);
    ELSE
      /* Handle all other errors here... */
    END IF;
  END;
  

  /* Sample When-Timer-Expired Trigger */
  DECLARE
    v_Timer  VARCHAR2(30);
  BEGIN
    v_timer := Get_Application_Property(TIMER_NAME);
  
    IF ( v_timer = 'ON_ERROR' ) THEN
      /* Notice, the timer name is case sensative! */
      Exit_Form;
    END IF;
  END; 
  

  I am aware that I can press F4 to exit this mode, but I don't want to do whenever I'm sure I'll get the user complaints.

  Well, it's just standard features of Oracle Forms. If you switch the Mode request form - you must run a query or cancel the query Mode! This is how it works. Your users need to understand that and accept it - just as they accept the functional also for other programs. ;) Another option would be to add a "Cancel request" button to your form and make it so it is enabled only when the form is placed in Query Mode. Just a thought...

  I personally prefer to prevent the occurrence of an error rather than remove the error. :)
  I hope this helps.
  Craig...

• Problems with having a Remote Host for the server vCenter Server vSphere?

  Hello

  We have a single vSphere Host located in the United Kingdom and a host vSphere cluster type 3 in France. I plan to add the vSphere Host UK to the France of vCenter Server.

  Does anyone know of any problem with the addition of a vSphere Host of a vCenter Server that is in a remote site rather than on the local network?

  See you soon

  Vince

  I put my vCenter without problems. Just keep in mind not to create a cluster with 2 teams who are on different nodes. Only you can manage the remote ESX host

• Problems with images in offline mode

  Hello, I'm coming back in video editing and I run into some roadblocks frustrating with Adobe Premiere Pro CS4.  I use one, what I discovered for cheap camera, Samsung SMX - F40. IM shooting resolution 'Fine TV', which I believe is 720 x 480.  By trial and error, I think I have a Preset of correct when creating my project sequence, because I successfully under the leadership and downloaded the video on YouTube that was my goal for this project. But he had problems all the time with the video going on offline so I had to re - change a lot.  Revisit the project final file only days laters, it is once more unusable because some clips are again in offline mode.  I try to re - link them, but the files are "format unsupported or damaged."  These are the same files with the same name in the same place that I used to create the video and he suddenly doesn't like them now.
  
  The files are .mp4, I read that this first seems to have problems with.  I used Bigasoft Total Video converter to change my .mp4 in .mp4 I read first would like better. But I still have the same issues. He's not either.
  
  I'm a bit lost and I was wondering if anyone has advice or solutions that could solve my problem.

  Welcome to the forum.

  This ARTICLE is about a bit of Offline media, but with this error message, it looks more like your fully-paid version of CS4 has been bitten with him back to Bug Trail. This has happened to multiple users and is mostly the result of the update of PrPro. A quick check, create a new sequence and see if you still all Presets of HD. It is likely that you do not have. This affects what it is MPEG, so HD or SD and it's just to quickly see what you have available.

  The "fix" is an operation of several stage and in this order:

  1. Disable, if possible (probably not, as the trial is not activated)
  2. Uninstall PrPro
  3. Download and run the Adobe CS5 of Tool Cleaner (latest version) several times, rebooting between each series.
  4. Install PrPro
  5. Immediately upgrade to the latest version before embarking
  6. Launch and test

  Good luck

  Hunt

• Problem with VI in Normal Mode, but not in execution to highlight

  Hi all

  This is my first post in this forum and I hope you can help me. I'm sorry for my bad English, English is not my main language.

  Now to my problem. I did a CNC with Labview machine, the machine has been built with a Lego Mindstorms NXT.

  The VI should read the lines in a text file, which a good movement for engines (G-Code). Mindsotrms LEGO NXT is connected via USB to the PC and the computer races VI target Mode. The VI is made in the 2011 Version of Labview with the Addon of NXT from Lego.

  Now the VI is finished, but he's going to correct work only in the Mode of execution to highlight (but he engines are not sync and his extremely slow). When I try to run the VI in normal mode, the engine for the port B does not work.

  Please can you help me.

  In the attachment, there is the VI (and an example of the G-Code (Code G example of Quadrat) file.

  Thank you very mutch.

  Kind regards

  Alex

  Your control loops seem to run (using all the CPU on the NXT loading) independent and probably cause famine across the loop.

  

  Add a delay here to minimize the problem.

  Not sure if it does help.

  BR,

  / Roger

• Problem with XControl and remote debugging

  Can you make a connection of remote debugging to an EXE or DLL that uses an XControl?  So far, my experiences would indicate the answer is no, but I find that surprising and have seen no earlier mention of it in bug reports or in the forums.  When trying to connect to the DLL with XControl, I get the error 'fatal error occurred during the operation, close the connection' dialog box.  I'm just connection of the local machine, not on the network.

  My real application is a rather elaborate DLL that is called from a Visual Studio 2008 C++ application and launches the LV panels dynamically.  I realized that my DLLs that include panels with XControls do not allow debugging remotely for you connect while dll without XControls works very well.  It is the only difference between the two projects.

  I've simplified it to a simple test program that merely updates an indicator in a timed loop.  I created two versions of the VI, which updates a digital single and the other who updates an XControl (which itself is a simple digital-only model change XControl of dropping a digital indicator on the FP of façade and update a local variable to it in the event of modification of data).  Then I built these two screws in the exe files and tried to make a debugging connection to each after the launch of the EXE.  Of course, the application with the XControl Gets the above mentioned error dialog box.  Any ideas on why this is happening?

  I have attached the sample project that generates the two EXEs.  One is called debugging with XControl Test and another test of debugging without XControl.  My worm. LV is 9.0f2.  Here's the very simple diagram showing the problem:

  

  I saw that this problem has been fixed in LV 2010 SP1:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/12560

  Look for the CAR ID 238566 to the fixed bug list.

• Problems with client configuration WRT54GS mode

  Hello

  I have a WRT45GS client mode configuration which connects to a WRT54GS access point, the problem is that when the radio is off it lose its configuration I have to manually repeat the procedure to be customer implemented through site survey.

  Did someone else you have this problem? It is really strange and I need to turn off the radio during the night

  Really thanks

  Just to check, both devices are WRT54GS? You must be referring to access to point to another device, since there is no option of client mode for WRT54GS.

• Problem with javascript in narrative mode

  Hi gurus!

  I'm trying to put conditional logic in a narrative view of my analysis. I found some advice and wrote that:

  < script >

  If ('@ {} {FIN01TIME}'== 'Period')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Fiscal Quarter: [/b]@2 [b] fiscal year: [/b]@3 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]]]")

  }

  If (' @{FIN01TIME} {} '==' quarter ')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Fiscal Quarter: [/b]@2 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]]")

  }

  If ('@ {} {FIN01TIME}'== 'Year')

  {

  document. Write ("[b] fiscal year: [/b]@1 [b] Roll Up: [{/ b]@{FIN01ND} {} [b] cost center: [{/ b]@{FIN01CC} {} [b] currency: [{/ b]@{FIN01CURR} {}" "]]]]")

  }

  < /script >

  Everything works fine, but the problem happens when I "click" on my analysis paging buttons (see attached image: javascript_problem_paging.png). After clicking, it leaves me with a blank page that contains only view narrative. In addition, displays "error on page" message of warning in the status bar (see attached image: javascript_problem_afterclick.png)

  I think that this problem occurs with the "onclick" javascript event. I tried to turn it off, but still does not work.

  Any help will be appreciated.

  Thanks for your time!

  Kind regards

  Fabian

  Hi all!

  I have my own answer, jeje.

  Instead of using "document.write...". "I put another narrative with a view

  control and set its content in "document.getElementById (.). innerHTML = "(le même code HTML)" ""

  It works perfectly! I hope that this achievement will help someone else.

  Kind regards

  Fabian

• Problem with the screen blend mode

  Hello

  I noticed that the screen on my Illlustrator a blend mode problem, he does not let the color when the shape is black...

  Here is a screen for the explanation:

  

  (overlay = screen in french)

  I don't understand what is happening... ID do something wrong?

  EDIT: I use Illustrator CC (2014)

  What document color mode?

  In CMYK mode, you might want to try a (very) rich black.

• Strange problem with the VMware Remote Console Plug-in

  Hello

  I'm on Win7 64 Bit as a host with VMware ServerVersion 203138 2.0.2Build. The VMware Remote Console Plug-ins wants always be installed even I already installed it. It happens with all the browsers I tried.

  When I click on install the plugin, it is deleted, the next time, it is installed, removed..., installed the message remains... :-(

  Any help?

  Try to run the browser as administrator. Maybe that will resolve the situation.

  ---

  Paul Svirin

  Software developer StarWind ( http://www.starwindsoftware.com )

• Problem with selectOneChoice in compact mode

  Hello
  
  When you use selectOneChoice with compact mode, it only displays a list dropdown icon on the page. For the selection must be OutputText another to display the selected value. But when you choose the option print the page with ShowPrintablePageBehavior, selectOneChoice will display the value selected, which is like twice on the page. We can turn off the selectOneChoice showing the value selected in the printable page?
  
  Kind regards
  Shakur

  Hello

  guess this solves your query

  Frank

• Problems with folder permissions after replacing the hard drive

  Hello

  Recently, I replaced the hard drive on my mac.  Already before the replacement, I got the files that I had locked.  Now I'm unable to open the file.  I get the error "the folder 'nom_de_dossier' can not be opened because you don't have permission to see its content".  I looked at the permissions for the folder and everything he says is fetch.  I ran a command in the Terminal and for one of the records in question, that's what I see-

  drwxr-x - 13 501 501 442 5 July 2013 MG

  Any help would be greatly appreciated!

  Running OS X El Capitan

  10.11.4 version

  Try this first:

  Start the mac all holding the SHIFT key, it is slow, connection, and then select Restart from the Apple menu.

  When this does not help:

  Reset password utility in the recovery Partition:

  1. Restart your computer from the recovery partition.
  2. Open disk utility and run a repair permissions on your boot volume (in ElCapitan click the first aid tab). Once this completed, close disk utility. We do this for good measure.
  3. Open a Terminal from the Utilities menu. Type in resetpassword and select your user (NOT administrator system/root) account in the menu drop-down.
  4. Click on the Reset button at the bottom of the window ACL section and Reset the folder permissions.
  5. Exit the utility password and return to the main recovery menu.
  6. On your keyboard, press ⌘ + Q and restart your computer. It is very important that you don't hold down the power button to exit the recovery session, or the ACL Reset to occur.